NWBC integration with Solution Manager (Workcenters)

Hi,
We want to integrate NWBC with the SolMan workcenters to give an "easy" acess to SolMan to our managers.
We found the service "/default_host/sap/bc/solman/nwbc/" in SICF so the integration should be possible but it doesn't work, I guess that some customizing must be done.
Is there any documentation, guideline etc. about how to make this configuration?
Thanks in advance,
Jon

Hi,
Thanks so much for the info. We followed the configuration steps from the "Solman 7.0 Ehp1 configuration guide" and we were able to configure NWBC 1.0 with our SolMan. We didn't find any configuration guide for NWBC 3.0. Is it possible to configure NWBC 3.0 with SolMan?
As already explained, now we are able to access with the NWBC 1.0 to SolMan workcenters. However, when we try to open any Abap transaction we get the following error "Scripting is disabled by the server". We set parameter "sapgui/user_scripting" to "TRUE" and now we don't get the mentioned error but it starts loading the Abap transaction and it never ends. Is there anything more to be done?
Thanks again!
Jon

Similar Messages

SAP CPS Redwood integration with Solution Manager 7.1 SP8

Hi experts,
I need your help..!!
We are planning to integrate SAP CPS Redwood with Solution Manager 7.1 SP8, I have no idea about it, Can you please provide me a step-by-step document, to complete this task?
Regards
Zohaib

hi,
dont have any explicit step by step doc for CPS integration
but refer the source here http://www.sdn.sap.com/irj/sdn/nw-scheduling?rid=/library/uuid/c04021b0-5a4e-2a10-b3a0-eb8f0c799736
some more on SAP Central Process Scheduling by Redwood (CPS)
Thanks
Jansi

BCP Microsoft Platform integration with Solution Manager

Hi
Is it possible to integrate BPC Microsoft platform 7.0 and 7.5 with Solution Manager?
If so how? Is there documentation available explaining the process?

Hi Johan,
There is some level of integration available with Solution Manager. To set up your system for Diagnostics, refer to "End-to-End Root Cause Analysis System Landscape Setup Guide", which is available on Service Marketplace at [https://service.sap.com/sapidb/011000358700000074392009E|https://service.sap.com/sapidb/011000358700000074392009E], and follow the chapters that apply to Planning and Consolidation.
You can also access this document by going to [http://service.sap.com/diagnostics|http://service.sap.com/diagnostics] and selecting the Media Library link under the "More Documentation" section. The document is labeled "SAP Solution Manager Landscape Setup Guide".
Thanks.

Help Needed: HP QTP/UFT integration with Solution Manager

Hi Experts,
We are trying to make HP UFT 12.00 work with Solution Manager 7.1 for enabling automated testing for our client. We have successfully linked HP UFT and Solution Manager and were able to record and execute a test script created in HP UFT with no problem.
Unfortunately, when we tried creating a new test script in HP UFT and tried saving it so that it is stored in Solution Manager, we get the following error. We have reviewed the integration procedures and authorization objects needed and it seems nothing was missed.
Anybody familiar with the said error or any suggestions where to look will be appreciated. Thanks in advance.
Detailed steps for replicating the issue:
Connect to Solution Manager through Tools -> SAP Solution Manager Connection…
2.     Open Unified Functional Testing (UFT) 12.00
3.     Click File -> New -> Test
4.     Type even a dummy script in the Action window
5.     Save Test Script by clicking File -> Save <test name> As…
6.     Fill out dialogue box with Test name and Test version then click Ok. Note: I used Z* name
7.     Error Message appears
Note:
One observation is that, error message only appears when trying to save a Test that is not currently in Solution Manager. If I try saving the dummy test from above as “Z_CREATE_SALES_ORDER_02” (exists in Solution Manager),
I am asked if I want to overwrite existing test in Solution Manager.

Hi,
I have configured the solman in accordance with UFT12.0 but still un-able to make conenction to the solution manager.
Connect to Solution Manager through Tools -> SAP Solution Manager Connection…
Error:
Message
SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=<IP>, GWSERV=sapgw02, SYSNR=02
LOCATION    CPIC (TCP/IP) on local host
ERROR       partner <IP>:3300' not reached
TIME        Tue Jan 19 12:02:17 201
RELEASE     710
COMPONENT   NI (network interface)
VERSION     39
RC          -10
MODULE      nixxi.cpp
LINE        3286
DETAIL      NiPConnect2: 192.12.353.12:3302
SYSTEM CALL connect
ERRNO       10060
ERRNO TEXT WSAETIMEDOUT: Connection timed out
COUNTER     1
Could you please guide?
Regards,
Raichand

ECATT integration with solution Manager

Hello Colleagues,
Please let me know if any of you have worked on integration between Solution Manager and eCATT.
I have the scripts in eCATT system now i need to run these scripts from Solution Manager system in the target system.
Any info would be of great help.
Thanks,
Ajay

Hello Ajay,
Have you seen these links?
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/7e/8186fa137998448de956476b8cecdc/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/de/50e848f5f311d5997000508b6b8b11/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/48/e151fddb163184e10000000a421937/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/59/f49e6fe97711d5995d00508b5d5211/frameset.htm
http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/cb/cb3a3e5069eb6ce10000000a114084/frameset.htm
These links are from the Solution Manager Help Library, so the information is specific to Solution Manager for eCATT
Regards,
Paul

MDM Integration with Solution Manager

Hi Gurus,
Can any one explain me the process to Integrate MDM 7.1 with Solution Manager?
Thanks,
Anil

Hi Anil,
documentation is generally available on [Service Market Place|http://service.sap.com/installmdm71]. You might find the How-to Guide Configure the MDM Administration Cockpit helpful.
Best regards
Michael

BMC Control M integration with Solution Manager

Hi
I have some question:
Is it possible to integrate BMC Control M with Solution manager?
Is SAP have plugin or we need to develop?
If we integrate then what is the benefit?
Please guide me.
Thanks
Dee

As Matues has provided that BCM Control-M is a supported job scheduling tool
Further to answer your question SAP Note 499040 explains that XBP interface is required for external job scheduling tools
You will find several documents that describe the XBP interface in detail at
http://www.sdn.sap.com/irj/sdn/nw-scheduling.
So you will need to use this interface to use the external job scheduling tool
Regards,
Paul

Peoplesoft integration with solution manager

Hi Experts,
I would like to know whether peoplesoft can be integrated with SAP solution manager and whether other third party applications can be integrated with Solman... it can be helpdesk, monitoring or any other scenario... Please pass on any information that you might have

I'm also interested in this topic because we want to integrate incidents and changes reported by the solution manager in a Peoplesoft S3 helpdesk.

Integration with solution manager 4.0 - service desk with XI ?

Hello Experts,
Does any one know how to integrate the solution manager 4.0 - service desk with SAP XI. I read the solution manager 4.0 service desk web service api, but it only has the XSDs. If any one can provide me any step by step procedure for creating the webservice through this api and publishing it....WILL DEFINETLY BE REWARDED.
Thanks,
Raju.

Hello,
I have the same task.
At SolMan side I made:
- released the web service
- Create logical port
- Create HTTP connecto to 3th party ServiceDesk
But I don't understand the "Configure Interface to Solution Manager Service Desk" step.
What was Your problem?
Regards,
Gusztá

Code Inspector integration with Solution Manager

Hi All,
I would like to integrate the Code Inspector into Solution Manager, so that changes in managed systems can be checked prior to passing to test. I wonder if any of you is aware of such a solution, or have already implemented such functionality
Thanks iin advance,
Best regards,
Ádá

Hi
please check the blog
[/people/christian.drumm/blog/2009/12/30/continuous-integration-using-code-inspector|/people/christian.drumm/blog/2009/12/30/continuous-integration-using-code-inspector]
and the discussion on the treads,
[Is it possible to integrate the Code Inspector in Transport Management|Is it possible to integrate the Code Inspector in Transport Management]
might be this helps
Thanks,
Jansi

SAP Best Practice Integrated with Solution manager

We have a server in which we installed SAP Best practice baseline package and we have the solution manager 7.01 SP 25
We maintained the logical port but when we try to check connectivity to solution manager we got the following error:
Connectivity check to sap solution manager system not successful
Message no. /SMB/BB_INSTALLER375
Can anyone guide us how to solve the problem and also if there is another way to upload the solution defined on the best practice solution builder into sap solution manager as a template project
Thanks,
Heba Hesham

Hi,
Patches for SAPGUI 7.10 can be found at the following location:
http://service.sap.com/patches
-> Entry by Application Group -> SAP Frontend Components
-> SAP GUI FOR WINDOWS -> SAP GUI FOR WINDOWS 7.10 CORE
-> SAP GUI FOR WINDOWS 7.10 CORE -> Win 32
-> gui710_2-10002995.exe

Cannot run HP QTP 11 in integrated mode with Solution Manager 7.1

Hi,
I have setup qtp to work with solution manager 7.1. QTP works in standalone mode with no issues. as soon as I try and use it in integrated, i.e. launch qtp from solution manager, the message "failed to start external test tools quicktest professional" displays. When I click the back button the message "error during method call in OLE API" displays.
Using qtp in integrated mode worked previously on the solution manager 7.1 system. Since the solution manager 7.1 system was moved to a new datacenter it stopped working. I am not sure if this could have had an impact.
I have tested qtp with several different solution manager boxes and it works perfectly in integrated mode. please advise what server side settings i need to consider to solve the issue.
Sincerely,
David
Edited by: David Snyman on Mar 2, 2012 7:38 AM

Hi Sida,
Can you check SapLogon.ini file maintaining below location please.
let me know it resolve the isse, can you forward your details to <email removed by moderator>
looking forward your response.
Regards
Naveen
File Location
Use
C:\Windows\saplogon.ini
Enable QTP to identify the Solution
Manager Server
C:\Users\nav\AppData\Roaming\SAP\Common\saplogon.ini
Auto log on to SAP Systems for testing
C:\SAP\FrontEnd\SAPgui\saplogon.ini
Set Record and Run settings in QTP for
64 Bit OS
C:\Program Files
(x86)\SAP\FrontEnd\SAPgui\saplogon.ini
Set Record and Run settings in QTP for
32 Bit OS
Message was edited by: Manish Kumar

Integrating EP 6.0 with Solution Manager 3.2 .

Can anyone please help me regarding the steps for integrating EP 6.0 with solution Manager 3.2.
It would be nice if any one would direct me to any link or any presentation where in the steps for the above subject are illustrated.
Regards,
Ashish .A. Poojary

Ashish,
What is your requirement?
Could you be more specific about the area your exploring
Solution manager is huge...
Please assign pts if it helps

Are you utlizing SAP's Quality Center with Integration to Solution Manager?

Hello,
I am interested in hearing from folks who are utilizing SAP's Quality Center with or without Integration to Solution Manager. Please post your experience on setting this up and realizing the benefits, i.e. efforts involved, what features of HPQC you are using, is it a good tool to use for integrated SAP testing etc.
Thanks in advance for your help!
Abu

Hi
I luv solman so if u ask me i can do all with solman itself and say not to go with Quality center
but again it is upto project requirement
it is very easy to build the automated scripts in QTP etc used with Quality center but again bit more complicated in ECATT
its upto the ur decision but if u r gng with manual test case management forgot quality center and go with Solman
So far i have done 5 Test Management implementation including both type of test casees automatic and manual and all are managed with solman
moreover if u get service desk configured in place then its integrated with solman test management whic helps u a lot.....
one step ahead go for Change management.
Hope it ans ur query
Regards
Prakhar
Edited by: Prakhar Saxena on Jun 9, 2010 12:06 AM

SMD Configuration on MDM 7.1 with Solution Manager 7.01 SP19

Hi,
Kindly let me know if someone has faced issue with configuring SMD on SMD 7.1 with Solution Manager 7.01 SP19. Presently I have configured that and System is being shown in Wily Introscope Webview but Saposcol is greyed out in that.
Also system is not showing any data in Introscope Dashboard. Any guess for this?
Earlier while I was configuring SMD, error related to null installation directory (...Invalid root directory: /usr/sap/SID/null ) were occuring. After that when I created a softlink for saposcol service from /usr/sap/hostctrl/exe/saposcol to /usr/sap/SMD/SMDA97/exe.
Still no data and still in SMD Agent logs saposcol service warning is there.
Thanks & Regards,
Manish Singh

Hi Jansi,
Thanks for the reply..
Here is our scenario. SAPOSCOL was not there in /usr/sap/SMD/SMDA97/exe first place. So I made the softlink from /usr/sap/hostctrl/exe/saposcol to /usr/sap/SMD/SMDA97/exe and than re-ran setup again but still of no use.
Our Soltuion Manager saposcol version and MDM saposcol version is same. Below is the SMD Agent log of MDM server:
Apr 20, 2011 2:36:19 PM [Thread[Thread-22,5,main]] Error      com.sap.smd.wily.hostagent.config.AgentConfigVO - finalizeDestination(): Initialization failed
[EXCEPTION]
com.sap.smd.wily.hostagent.PermanentException: Error: cannot connect to destination SapHostControl_Default. Probably saphostctrl is not installed. This error can be ignored if saposcol is available.
at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlDestination.open(SapHostControlDestination.java:98)
at com.sap.smd.wily.hostagent.config.AgentConfigVO.finalizeDestination(AgentConfigVO.java:85)
at com.sap.smd.wily.hostagent.config.AgentConfigXmlHandler.endElement(AgentConfigXmlHandler.java:174)
at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.endElement(SAXDocHandler.java:156)
at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1953)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1846)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2442)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1843)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2845)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:231)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:165)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245)
at com.sap.engine.lib.xml.parser.Parser.parse_DTDValidation(Parser.java:260)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:271)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
at com.sap.smd.wily.hostagent.config.AgentConfigParser.parseXml(AgentConfigParser.java:59)
at com.sap.smd.wily.hostagent.SapAgent.loadConfiguration(SapAgent.java:430)
at com.sap.smd.wily.hostagent.SapAgent.start(SapAgent.java:93)
at com.sap.smd.wily.hostagent.WilyHostService.startAgent(WilyHostService.java:118)
at com.sap.smd.wily.hostagent.WilyHostServicep4_Skel.dispatch(WilyHostServicep4_Skel.java:168)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
at com.sap.engine.services.rmi_p4.DispatchImpl.run(DispatchImpl.java:721)
at java.lang.Thread.run(Thread.java:664)
Caused by: javax.xml.rpc.soap.SOAPFaultException: Method 'SOAP-ENV:Envelope' not implemented: method name or namespace not recognized
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.buildFaultException(MimeHttpBinding.java:747)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.processDocumentFault(MimeHttpBinding.java:870)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1451)
at com.sap.smd.agent.wsclients.saposcol.SAPOscolStub.getCpuConsumption(SAPOscolStub.java:142)
at com.sap.smd.agent.wsclients.saposcol.SAPOscolStub.getCpuConsumption(SAPOscolStub.java:157)
at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlDestination.open(SapHostControlDestination.java:94)
... 25 more
Apr 20, 2011 2:36:19 PM [Thread[Thread-22,5,main]] Warning    com.sap.smd.wily.hostagent.SapAgent - startActions(): Action SAPOsColWs
[EXCEPTION]
com.sap.smd.wily.hostagent.TransientException: Destination not available:SapHostControl_Default
at com.sap.smd.wily.hostagent.saphostcontrol.SapHostControlAction.init(SapHostControlAction.java:74)
at com.sap.smd.wily.hostagent.SapAgent.startActions(SapAgent.java:396)
at com.sap.smd.wily.hostagent.SapAgent.start(SapAgent.java:94)
at com.sap.smd.wily.hostagent.WilyHostService.startAgent(WilyHostService.java:118)
at com.sap.smd.wily.hostagent.WilyHostServicep4_Skel.dispatch(WilyHostServicep4_Skel.java:168)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
at com.sap.engine.services.rmi_p4.DispatchImpl.run(DispatchImpl.java:721)
at java.lang.Thread.run(Thread.java:664)
Apr 20, 2011 2:36:20 PM [Thread[Thread-22,5,main]] Warning    com.sap.smd.wily.hostagent.action.SapOsColAction - launchDaemon(): saposcol exited with 255***********************************************************************
This is Saposcol Version COLL 21.01 711 - AIX v12.01 5L-64 bit 090324
Usage: saposcol -l: Start OS Collector
        saposcol -k: Stop OS Collector
        saposcol -d: OS Collector Dialog Mode
        saposcol -s: OS Collector Status
The OS Collector (PID 1552388) is already running .....
Apr 20, 2011 2:36:23 PM [Thread[SAPOsCol,5,main]] Error      com.sap.smd.wily.hostagent.action.AbstractAction - run(): Action throws exception, will be terminated: SAPOsCol
[EXCEPTION]
java.lang.NullPointerException:
at com.sap.smd.wily.hostagent.action.SapOsColAction.reportProperty(SapOsColAction.java:293)
at com.sap.smd.wily.hostagent.action.SapOsColAction.dumpSection(SapOsColAction.java:239)
at com.sap.smd.wily.hostagent.action.SapOsColAction.processXml(SapOsColAction.java:164)
at com.sap.smd.wily.hostagent.action.SapOsColAction.doRun(SapOsColAction.java:417)
at com.sap.smd.wily.hostagent.action.AbstractAction.run(AbstractAction.java:53)
at com.wily.EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:728)
at java.lang.Thread.run(Thread.java:664)
Our MDM is 7.1 version and Solution Manager is 7.01 (EHP1) with SP19 so we should configure our MDM system as 7.1 version which we did but still data is not coming in Wily properly. Its not showing SID name under the hostname in Wily Introscope and neither is MDM Servers (Master Data Import Server, Master Data Server & Master Data Syndication Server under SID).
Now the interesting thing is that if we configure our MDM server as 5.5 version with Solution Manager and do the configuration than its showing in Wily but in that case MDM Cockpit doesn't work.
We want both to work Wily as welll as MDM Cockpit since our MDM and Solman version matches for both configuration.
Any ides or help steps to do that?
Thanks,
Manish Singh

NWBC integration with Solution Manager (Workcenters)

Similar Messages

Maybe you are looking for