NWBC v3.0 installed, but "nothing happens" upon executing desktop shortcut
I have a problem with v3.0 of NWBC that I have recently installed. Upon double clicking on the desktop shortcut icon, the initial NWBC 3.0 splash screen is displayed, but then nothing else happens. I am not presented with any screen where I am able to select a backend system to connect to. Task Manager shows the service "sapstartsrv.exe" still running (I'm assuming that this is linked to NWBC), but no other evidence can be seen that NWBC is actually running.
I would like to add that NWBC v1.0 works perfectly well on the same PC, and connects successfully to backend SAP systems.
Some additional information.
- I have just installed SAPlogon 7.20 + restarted (as the previous version 7.10 patch level 14 did not meet the required level of 7.1 level 15)
- I am running XP SP3. Windows hotfix 919477 is not required, as it is already present as part of one of the XP SPs.
- I have reverted from Google Chrome as my default browser back to IE (+ restarted), to see if this made any difference, but still no luck.
Many thanks in advance to anyone who can shed any light on this issue, given the "scraps" of information provided above.
Alistair Crawshaw
Hi Ali,
I am also facing the same issue. After installing NWBC 3.0 when I try to run it, it just display the SAP splash screen and then get closed automatically and I am not getting any screen to select the backend system to connect.
I saw your reply:
+Please ignore my question above. The problem was due to the fact that the backend ECC system that we were connecting to did not have the relevant EHP + Support Pack Level. After updating these, the connection was successful.+
But how did you get the screen to add backend system to which you want to connect?
Regards,
Vikram
Similar Messages
-
The game "horn" does'nt open and shows installing but nothing happens. it was transferred from the computer to the ipad. help!, The game horn does'nt open and shows installing but nothing happens. it was transferred from the computer to the ipad. help!
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
iOS 7: Help with how to fix a crashing app on iPhone, iPad (Mini), and iPod Touch
http://teachmeios.com/help-with-how-to-fix-a-crashing-app-on-iphone-ipad-mini-an d-ipod-touch/
Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Delete the app and redownload.
Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
http://support.apple.com/kb/ht2519
Cheers, Tom -
Need camera raw plugin 8.5 to switch between Lightroom and PS CC. Tried to update CC. It say installing but nothing happens.
You may need to do a manual install:
http://helpx.adobe.com/x-productkb/multi/camera-raw-applictions-cannot-updated.html -
I just bought photoshop elements. It claims to be installed, but nothing happens.
I just bought photoshop elements. It claims to be installed, but nothing happens. Akamai NetSession says Download complete, so I click on open bundle and get nothing.
Good day!
Please post Photoshop Elements related queries over at
http://forums.adobe.com/community/photoshop_elements
Regards,
Pfaffenbichler -
I PURCHASED AN APPLICATION FROM APPLE STORE. AN ERROR OCCURRED WHILST DOWNLOADING IT. IT WANTS ME TO REVERT BACK TO PURCHASES IN ITUNES, AS SOON AS I TAP ON "INSTALL" IT SHOWS THE SAME MESSAGE AGAIN. HOW DO I SOLVE IT PLEASE? IT SHOWS ON MY STATEMENT THAT I PURCHASED THE APPLICATION?
Try redownloading the app directly to the iPod by:
]Downloading past purchases from the App Store, iBookstore, and iTunes Store
It may be that iTunes is not signed into the account that purchased the app or that the computer is not authorized for that account.
iTunes Store: About authorization and deauthorization -
I had kindle on my ipad 3 but it froze the other day and I couldn't turn pages or go to home page so I deleted it from the i pad - I've followed the instructions and I've been on to Amazon but the app won't re- install - it says it's waiting to install but nothing happens can anyone help with what I should do - thanks
Can any one help, any one? Please.
-
I have tried to download Mavericks on my 2010 iMac(10.6.8), but nothing happens, not even the install app downloads, also I tried to download chrome, I moved it to the applications folder and when I opened the folder it wasn't there. I have a 1tb hard drive that is mostly empty. By the way I just got this imac used from a reseller.
Mavericks downloads into the Applications folder, where you can install it. Some Mac App Store Troubleshooting information and how to resume a download that was interrupted; some of the information here might get you an answer. Failing that, try contacting Apple Support.
-
I am trying to INSTALL the free trials of AI and PS when I click on the link to install it goes to another page says installing but nothing is happening. I have the FREE TRIAL Creative Cloud Membership.
I am getting very frustrated with this. When I try to install the Creative Cloud thing it asks me to pay even though it says try for free.Hi Mirrormonolith,
Please try the following steps assuming its a MAC:
1) Open Activity monitor and Force quit Adobe CEF Helper, Creative cloud, Adobe IPC Broker & Crash Deamon if available.
2) Try to open, if doesn't work then go to Applications>> Adobe Creative cloud>> Right click>> Get Info>> Click on the Add sign>> Select the user you are logged in>> Give Read and write access.
3) If that doesn't work then enable the root user and launch to update there, check this link on how to enable/sign in to root user Enabling and using the "root" user in Mac OS X
Please let me know of that worked.
-Ankit -
I have a few problems...
I wanted to make a partition to install windows, I tried to use bootcamp 5 where it wanted to partition and install windows at the same time. I do not have a cd of windows but instead had it on a flash drive. Bootcamp couldn't find it. Instead I was reading forums and found that there was another way to install windows by partioning your harddrive using the disk utility, downloading the bootcamp drivers, and installing rEFIt (an app that when starting the compouter a menu would come up to boot windows from the flashdrive). I try that and the windows install screen gets me to the point where I pick a partition. I attempt to pick the partitioned drive but a message comes up telling me that "this is of the GPT partition style" and windows cannot be installed on the drive.
So now I went back to disk utility and deleted the partition but there is still blank space. I wanted to retry and install windows through bootcamp (somehow) but a message comes up that there cannot be any partitions or that a partition must be created using bootcamp. SO i keep trying to drag the partition over the blank space and hit apply but nothing happens.
By the way I was trying to install windows 8 pro, some forums would say that you cant install win8 however I found others that said you could. How do I fix my partition and how do I use bootcamp to install windows (preferrably 8)?Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.
-
I tried to download and install the new IOS7 software to my IPhone 4 three times but nothing happened. What do I do next? I no longer have a "1" by my settings.
Okay genius, try reading before posting.
These are user to user technical support forums.
No one here sent you any notification or posted any such website.
Plug the device into a computer running iTunes and update. -
I'm trying to install windows 8 on mac, but after partitioning and restarting, it stucks on blue logo and i waited 20 minutes but nothing happened, what can i do, please help.
I think there's some remmants left over from when Apple transferred stuff over. We can try a quick fix, but if that doesn't work, I think the only option is to clean install OSX and then install Windows.
open disk utility, confirm that you only have 1 partition (mac journaled)
restart and PRAM reset
open disk utility and repair permissions twice
restart boot camp assistant
Does it work?
If not, I would boot holding command+R, choose disk utility from the menu and completely erase your HD (formatting it as mac journaled again). Then, install OSX on this HD. Once OSX is installed, don't copy your files over from the backup yet. Instead, start boot camp assistant and see if you can get Windows installed. You can copy back your other files after we get Windows installed. -
I just purchased Final Cut Pro from the App Store and it will not download to my computer. I try and install it from my purchases file but nothing happens. Any suggestions?
If it's in the purchased page and doesn't download, you should contact Apple.
-
I installed creative cloud to my desktop and it won't open. The icon bounces but nothing happens, I tried uninstalling and reinstalling but I think I screwed it up more. Please help!
Dd7 do you receive any specific error messages? What version of Mac OS are you using?
-
Hello I'm trying to update my I phone 5 to iOS 6 but is not letting me I'm following the instructions. I
Go to settings , update and install but nothing is happening can u please help me what am I doing wrong
Thanks evelynCan anyone help
-
Installed envy 110..can't get a home screen...i choose english but nothing happens at that point..
have installed envy 110...choose english but nothing happens..trying to get a home screen...
Did you install the printer through a wireless or USB connection ? Did you use the CD that came with it or did you download it from the hp website ? You may try to do a hard reset and power the printer off and then back on and see if that helps. Let us know where you are on this if you still need help.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.
Maybe you are looking for
-
Problem with Generic Sync after upgrade
Hi guru, I have this problem: I have done a upgrade ME2.1 -> MI2.5 SP18. I have a simple Generic sync application that using a simple Function Module: <b> function Z_ME_TEST_CONNECTION. ""Interfaccia locale: *" EXPORTING *" VALUE(STATUS) LIKE B
-
[svn:fx-trunk] 12929: Deleting an empty folder for Deepa.
Revision: 12929 Revision: 12929 Author: [email protected] Date: 2009-12-14 15:49:16 -0800 (Mon, 14 Dec 2009) Log Message: Deleting an empty folder for Deepa. QE notes: None Doc notes: None Bugs: None Reviewer: None Tests run: None Is noteworthy
-
Can I Add the User Defined Unit system?
Can I add the User Defined Unit, Just like mm, inch..? My Clients are Korean. So. They want to use the Korean traditional Unit system which Not defined in Indesign. Pls Help me.
-
I'm not sure what happened, but my Utilities directory is gone. I checked my backup, and it's missing there as well which indicates the folder disappeared some time ago. I realize everything I added is lost for good, but I would like to re-install th
-
I am trying to create a connection to my server so that I can start working. I enter the name of my FTP server, which is http://dreamhost.com. I enter my FTP username and password and this little box pops up that reads:"Unknown host. Contribute could