NWDI check-in of CMS transport studio has no entries

Hi,
I want to use the CMS to import existing packages in a new one. The sld and the Landscape Configurator are configured and the packages are in the inbox of the CMS. But there are no packages shown in the check-in table of the transport studio.
Have anyone had this problem before? Whats the reason?
Kind Regards
Norman

Hi Norman,
did you receive an answer to your question or did you find a solution by yourself?
We are facing the same problem, we don't find the MSS Package in the Transport Studio for check in. We did copy the .SCA file into the import folder of the Transport Studio.
Any help would be appreciated!
Regards, Andreas

Similar Messages

A Important problem about CMS Transport Studio Test Tab

Hi experts:
    I am use NWDI and modify ESS source code, when i check in my modified project like esstratre and release it . In CMS transport studio i consolidation , assembly it then test it .but i make a fatal mistake,there is some mistake in project esstratre but i already check in it .So in the Test tab SMD deploy failed.
   Now i want restore the history version before i modify the project . But what can i do? Please help me.Thanks a lot.
                         yours zunxian

HI,
there is some mistake in project ess~tra~tre but i already check in it
1. can you check out your DC and correct those changes? and check in it.....its the best solution.
    and good for you , so you can keep some needed changes, present in that activity.
2. in DTR perspective there you can see versions in the version graph view.
3. or use sync to date option for your DC.
But the 1st option is preferable as a developer.

CMS-Transport Studio: Link Transport Organizer is disabled

Dear Experts!
When I using Change Management Service- Transport Studio, I see that the link Transport Organizer is disabled with information
" Change and Transport System not configured for the selected Track" , I already config CMS and TMS as the document guide.
Please help me resolve this problem.
Thanks all.

Hello Thao
The situation looks more like an configuration issue, very
probably caused by the error concerning the name of the RFC destination
(note 1003674): Please ensure that the destination is named
'sap.com/com.sap.tc.di.CTSserver', with only capital 'CTS', but
completedly small 'server' at the end.
Thanks
Kenny

Do not see created SC in check in tab of transport studio

Hi,
We have created a SC in SLD and created a track and added that SC in Track.
But when coming to the transport studio . Do not see the created sc , but can see the three dependent SCs as they are present in inbox.
we are in Netweaver2004s . OS : windows
any solutaion ?

Hi Kousik,
If I am not wrong then you have created SC in SLD and you wanted to start development under this SC, right?
You have not added this SC as dependant SC. It will show only dependant SCs in the check-in list. You have to import those SCs into Development to start working with this.
Try to import configuration from Developer studio. You will see your SC.
If my assumption is wrong please reply.
Regards,
Bhavik

Error while importing to production through CMS Transport Studio

Hi,
I am trying to transport my application from development to Production using CMS tracks. All DC's are getting properly consolidated,Assembled and Approved. But while importing into the Production, it is throwing following error :
*************ERROR LOG********************************
Info:06/07/22 17:07:13 - ERROR: Not deployed. Deploy Service returned ERROR:
Info: java.rmi.RemoteException: Cannot deploy application asianpaints.com/hsspapp..
Info: Reason: Exception during generation of components of application asianpaints.com/hsspapp in container EJBContainer.; nested exception is: Info: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application asianpaints.com/hsspapp in container EJBContainer.
Info: at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:554)
Info: at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
Info: at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
Info: at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
Info: at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
Info: at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
Info: at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
Info: at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
Info: at java.security.AccessController.doPrivileged(Native Method)
Info: at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
Info: at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Info: Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application asianpaints.com/hsspapp in container EJBContainer.
Info: at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:621)
Info: at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:319)
Info: at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
Info: at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
Info: at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
Info: at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3139)
Info: at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:539)
Info: ... 10 more
Info: Caused by: java.lang.NoClassDefFoundError: com/apil/hssp/newhelper/TransactionDTOInfo: at java.lang.Class.getDeclaredMethods0(Native Method)
Info: at java.lang.Class.privateGetDeclaredMethods(Class.java:1655)
Info: at java.lang.Class.getMethod0(Class.java:1901)
Info: at java.lang.Class.getMethod(Class.java:984)
Info: at com.sap.engine.services.ejb.deploy.xml.CMPParser.getFieldClass(CMPParser.java:464)
Info: at com.sap.engine.services.ejb.deploy.xml.CMPParser.fillCmpFieldInfo(CMPParser.java:88)
Info: at com.sap.engine.services.ejb.deploy.xml.CMPParser.parseCMPFields(CMPParser.java:646)
Info: at com.sap.engine.services.ejb.deploy.xml.CMPParser.parseFields(CMPParser.java:121)
Info: at com.sap.engine.services.ejb.deploy.xml.EJBJarParser.parseXml(EJBJarParser.java:174)
Info: at com.sap.engine.services.ejb.deploy.xml.EJBJarParser.parseXml(EJBJarParser.java:97)
Info: at com.sap.engine.services.ejb.deploy.DeployAdmin.parseSingleJar(DeployAdmin.java:297)
Info: at com.sap.engine.services.ejb.deploy.DeployAdmin.generate(DeployAdmin.java:247)
Info: at com.sap.engine.services.ejb.EJBAdmin.deploy(EJBAdmin.java:2144)
Info: at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606
*****************ERROR LOG************************
Both my development and production are on running on the same version.
Kindly help on this issue.
Regards,
Yashodhan Mujumdar

Hi Yashodhan,
I had the same problem and resolved by adding reference of the Used DCs in application-j2ee-engine.xml of EJB project.
The xml looks like:
<reference
 reference-type="hard">
 <reference-target
 provider-name="sap.com"
 target-type="application">xappscprxrpmcommon</reference-target>
 </reference>
 <provider-name>sap.com</provider-name>
 <fail-over-enable
 mode="disable"/>
thanks,
Nancy

Query regarding CMS transport!

Hi Experts,
I hav an issue with CMS transport. - I hav done certain changes in a mapping for a specific name space say urn:XYZ. The software component for this name space is say SC1. This software component also contains several name spaces say urn:123. urn:456. urn:pqr. And some of them are active and some inactive
Now as per process, I hav activated my specific messege mapping and then going to TOOLS- Export Design Objects - Mode: Transport Using CMS. -- Individual Objecis -......
Now when I go to the CMS url....there after carrying out the necessary steps [ Pls refer to the following URL.This thing WILL take some time as it is a 2.5 MB file :
http://www.esnips.com/doc/34d643fe-13b3-4c83-922a-c64db6b7e52d/Change-REQUEST-CMS-Process,-manual-Complete.
It contains a word document with details step by step screen shot showing everything in details -- see page 17 and 18. I dont understand , why in the approval tab, the SOFTWARE COMPONENT name is suggested, the reason being, if i select the SOFTWARE COMPONENT, all other name space within this SOFTWARE COMPONENT apart from my desired development get trsnaported in Production!!
EXPERTS, Pls check the doc in details,this is a kind of general manual and tell me if I hav missed out some thing/ or hav done some mistakes , I think this can be a gud document !!
Pls note, dont study the document by the NAME oF DEVELOPMENT perspective, I hav developed this doc from time to time with necessary changes / modifications !!
Regards,
Arnab.
Experts, this question still remains unanswered!
Edited by: Arnab Mondal on Oct 15, 2008 9:25 AM

Hi Suddha,
, it took me some time to prepare myself some answer.
the conversation!
Hi Arnab not a prob. I have not got a chance today to see your latest post on the thread, was busy with some stuff throughout the day.
+ Once Again Suddha , you managed time for me,, let me tell you, mine is not a very urgent issue, but YES, I want to get to the root of it!!!+
As you have said that, you see all the objects in the Assembly Tab page, then do one thing, right after you assemble the specific component, refresh the tab
and check if the other components get removed from the list, under Assembly Tab.
Well, tet me tell you some thing, in my process, I DONT Assemble the Specific component . Let me make this part clear to you . Let me tell you the steps, I
follow in details .
1. Once the change is done in the mapping- I transport it as INDIVIDUAL OBJECTS, through CMS Transport.
2. Log in to the Chanhe Management service!
3.Click on the appropriate TRACk-- that is track for integration repository
4.Click on teh aassebbly tab -- an assembly option arrives -- I select the " same suppot packages number as the last support package number!-- then click
on the ASSEMBLE button.
5. As a result of this all the 4 software components come into the list.
Here I select the appropriate SCV by selecting the LINE. Pls note I dont go to the SELECT Comonent button and select individual SCVs.
6. After selecting the LINE, I go to the approval tab, there I get to see all the SCVs, with severl datse. Here, I again select the appropriate SCV of mine based
on day and time. I select the LINE-- then click on the CONFIRM button. As a result of which i get to see APPROVED, for that SCV.
7. then I go to PRODUCTION TAB , again select the appropriate SCV line and click on the IMPORT button.
These are my steps. This is what I was tought . And now i feel , I missed certain steps .Pls correct me !
Then I must say that somehow you are assembling all the software components, somehow all the components are getting selected. I am having another
doubt, if the components have dependencies, could that be the reason for this?
Well as I described in step no 4 and 5 that I Do select the appropriate SCV in teh Assembley tab, by selecting the line but do not select it through "SELECT
Comonent button and select individual SCVs. Is this where I am going wrong????
Again, as far as the Integration Repository developments are concerned, no two SCV has any dependency, I am sure about that, the major factor being, the
3 SCV that I am working on are CUSTOM SCV.!
One more thing................if you are not going to the consolidation tab and importing the components into consolidation system, how are showing up in the
assembly tab. Strange! don't you think so? You need to follow the sequence of steps. Are you sure you are not referring to some older transports?
Well, this part ,I can smell RATs. Actually in my system I only have a PI develoment and PI production server. This is my first XI proj, and the above 7 steps
were all what I was told as necessary to send developments to Production. I hav absolutely no Idea of the utility of the CONSOLIDATION TAb, and the funda
of importing the components in the consolidation system. I donno anything about the installation of this CMS- Transport studio.But i can speak to the basis
team, and tell you , if you want to know about any specific basis settings.!!!
You need to follow the sequence of steps.
Pls tell me what am I missing !!
Are you sure you are not referring to some older transports?
That is not possible as I can check the date and time. all 3 SCV s have the same date and time. It is in the approval tab, I select the appropriate SCV and
send it for Production!!!
Regards,
Arnab .
Edited by: Arnab Mondal on Oct 20, 2008 11:43 AM

How to add aditional TAB in transport studio of CMS !!!

Hi,
Query 1:
If we define runtime system configurations for Dev, Consolidation (QA system), test and production in landscape configurator of CMS, same appears as TABs in transport studio of CMS.
Also sequence will be Dev than consolidation than Test and finally production system TAB.
I want to add one more TAB in transport studio of CMS that correspond to my traing portal server, so that I can import all my changes which has been moved to production into my training server, also I want this additional TRAING SERVER TAB to appear after production TAB in transport studio of CMS.
How i can achieve this ??
Query 2:
If i want to bring test server TAB after production TAB in transport studio of CMS , how I can do this ? generally Test system TAB comes before production server TAb, I want Test system TAB to come after production TAB? How to do this ??

Have a look at this blog.
/people/marion.schlotte/blog/2006/03/30/best-practices-for-nwdi-track-design-for-ongoing-development
Additionally search for 'track connection'.
The idea is to create a new track in to which all your production code from the first track can be transported.
Regards, Marcel.

SC's Dependencies are missing in the check-In tab of the transport Studio

In SLD, the SC is created with the following dependencies:
(1) DI Build Tool 7.0
(2) SAP J2EE Engine 7.0
(3) SAP JAVA TECH SERVICES 7.0
Then, in NWDS, in the Development Configuration Window, the SC which is created is loaded.
Within the created SC, the DC is created. but the DC is created with some errors saying " The dependency files are not linked".
XML of CBS Build Compartment:
Software Component SC : SAP_JTECHS
SC State : ( 3 gray colored circle )
<dependencies>
</dependencies>
<build-variants>
<build-variant name="default" required-for-activation="yes">
<variant-mappings>
</variant-mappings>
</build-variant>
</build-variants>
Please note the dependencies tag are empty.
I also done "update CMS". but still it remains the same. please explain me my mistake.
D:\usr\sap\JTrans\CMS\inbox folder is empty.
I could able to see all the buttons in the Check-In tab of the transport Studio. But the Check-In button is disabled and the table of Check-In tab is empty.
The required Track is selected in the left-hand side of the Transport Studio Window.
Please guide me.

Hi Sathya,
First you need to put SCA files
(1) DI Build Tool 7.0
(2) SAP J2EE Engine 7.0
(3) SAP JAVA TECH SERVICES 7.0
In your D:\usr\sap\JTrans\CMS\inbox in the server.
then you can create TRack and add SC dependancy to track...after that it will appear in the check-in tab.
Hope it helps,
Regards,
arun

In NWDI transport studio propagation request is of type TCSSoftwareComponen

Hi all,
I am now currently installaing NWDI for my lansdscape.
I created a software component added dependencies, domain and track after that in transport studio i was trying to import the these files as per the document(SAPBUILDT13_0-10003479,SAPJEE13_0-10003469.SCA,SAPJTECHS13_0-10003467.SCA) while doing it showing import running for a long tome then i checked the log files its diplaying an error its not imported like that.
For your reference i posted the log also.
20080417095931 Info   :Starting Step Repository-import at 2008-04-17 09:59:31.0571 +5:00
20080417095931 Info   :Component:sap.com/SAP_JTECHS
20080417095931 Info   :Version :SAP AG.20070812015951
20080417095931 Info   :3. propagation request is of type TCSSoftwareComponent
20080417095931 Info   :Sources will not be imported for this SC
20080417095931 Info   :Component:sap.com/SAP_BUILDT
20080417095931 Info   :Version :SAP AG.20070811184000
20080417095931 Info   :2. propagation request is of type TCSSoftwareComponent
20080417095931 Info   :Sources will not be imported for this SC
20080417095931 Info   :Component:sap.com/SAP-JEE
20080417095931 Info   :Version :SAP AG.20070812015311
Regards
Vijay kumar G
20080417095931 Info   :1. propagation request is of type TCSSoftwareComponent
20080417095931 Info   :Sources will not be imported for this SC
20080417095931 Info   :Step Repository-import ended with result 'not needed' at 2008-04-17 09:59:31.0617 +5:00

Hi all
solved on own.
Regards
Vijay

How can i check if a Final Cut Studio licence has been used or not?

Hello there,
How can i check if my 'Final Cut Studio 3 Retail' set has a usuable licence or they have been used allready? It is second hand and i no longer have a Mac and wish to sell the product. In the box it has 2 of the same serials so i gather it can be used twice?
Any help would greatly be appreciated
Kind Regards
Tim

If your serial is printed on the official sticker you will have no problems and should the new owner register it, any previous registrations will be deleted.
Officially you can only use it on one Desktop and one Laptop but there is no physical limit to the number of computers you can install it on.

Transport Studio

Hi Experts,
I try use NWDI, but, I created a Product and Software Component in SLD, and define my dependencies. After, I created a new track with a SC. This SC has the DC necessaries (JEE, Build and JTechs).
Now, when I go to Transport Studio, the Check in tab is empty? Whats happened?
Because this error, I have errors in NWDS with my DCs
Regards,
Davi

Hi,
what errors do you get in the Netweaver developer studio?
Cehckin tab in Transport studio is just used to upload some Software components in the track. In my opinion emptiness of checkin tab should not create any problem in the NWDS.
If you can post the error details, we can check what is the problem.
Akshatha

Import SCA files in Development Tab of the Transport Studio take more time

Hi,
After Check-In files in the Transport Studio, the import of SCA files starts in the development Tab of the Transport Studio.
The import takes more time. Why this happens?
Am I missing any configuration? Please specify in detail.
Thanks in Advance,
Sathya

SC: sap.com_SAP-JEE:
SDM-deploy
Returncode : Not executed.
How to check the username, password and url for SDM?
Log file of Repository-import:
Info:Starting Step Repository-import at 2009-10-13 22:15:49.0484 +5:00
Info:Component:sap.com/SAP_JTECHS
Info:Version :SAP AG.20060119105400
Info:3. PR is of type TCSSoftwareComponent
Info:Component:sap.com/SAP_BUILDT
Info:Version :SAP AG.20060411165600
Info:2. PR is of type TCSSoftwareComponent
Info:Component:sap.com/SAP-JEE
Info:Version :SAP AG.20060119105300
Info:1. PR is of type TCSSoftwareComponent
Info:Step Repository-import ended with result 'not needed' at 2009-10-13 22:15:49.0500 +5:00
Log File of CBS-make :
Import got failed.
Info:build process already running: waiting for another period of 30000 ms
Info:no changes on the CBS request queue (DM0_DEMObp1_D) after a waiting time of 14430000 ms
Fatal:The request queue is not processed by the CBS during the given time intervall => TCS cannot import the request because queue is not empty
Fatal:There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.
Fatal Exception:com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: The request queue is not processed during the given time intervall. There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.:communication error: The request queue is not processed during the given time intervall. There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.
com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: The request queue is not processed during the given time intervall. There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.
     at com.sap.cms.tcs.client.CBSCommunicator.importRequest(CBSCommunicator.java:369)
     at com.sap.cms.tcs.core.CbsMakeTask.processMake(CbsMakeTask.java:120)
     at com.sap.cms.tcs.core.CbsMakeTask.process(CbsMakeTask.java:347)
     at com.sap.cms.tcs.process.ProcessStep.processStep(ProcessStep.java:77)
     at com.sap.cms.tcs.process.ProcessStarter.process(ProcessStarter.java:179)
     at com.sap.cms.tcs.core.TCSManager.importPropagationRequests(TCSManager.java:376)
     at com.sap.cms.pcs.transport.importazione.ImportManager.importazione(ImportManager.java:216)
     at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.execImport(ImportQueueHandler.java:585)
     at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.startImport(ImportQueueHandler.java:101)
     at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImport(CmsTransportProxyBean.java:583)
     at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImport(CmsTransportProxyBean.java:559)
     at com.sap.cms.pcs.transport.proxy.LocalCmsTransportProxyLocalObjectImpl0.startImport(LocalCmsTransportProxyLocalObjectImpl0.java:1736)
     at com.sap.cms.ui.wl.Custom1.importQueue(Custom1.java:1169)
     at com.sap.cms.ui.wl.wdp.InternalCustom1.importQueue(InternalCustom1.java:2162)
     at com.sap.cms.ui.wl.Worklist.onActionImportQueue(Worklist.java:880)
     at com.sap.cms.ui.wl.wdp.InternalWorklist.wdInvokeEventHandler(InternalWorklist.java:2338)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:422)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:133)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:344)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:298)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:705)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:659)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:227)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:150)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:47)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Info:Step CBS-make ended with result 'fatal error' ,stopping execution at 2009-10-14 02:16:28.0296 +5:00

NWDI:Communication with the CMS failed

Hi All,
We are trying to setup NWDI in our landscape.When we are going to setup an NWDI Track for EP 7.0 SP16 ,getting the message
Validation Error: Communication with the CMS failed. Ensure that the URL is correct, that the CMS is up an running, and that the given user has administrative access rights for the CMS
Can any body help us.We are new to NWDI.
Regards,
Vijay

Hi,
Cms URL is
http://<host>:<port>/webdynpro/dispatcher/sap.com/tcSLCMS~WebUI/Cms
Assign following
roles : NWDI.Administrator, NWDI.Developer, NWDI.Architect, NWDI.Configurator, NWDI.Operator, NWDI.QManagers, NWDI.CMSAdmin
to the user : NWDI_CMSADM.
Your Transport Directory * : /usr/sap/jtrans
Check that all required .sca files are available there.
Regards,
Vijay Siwach

SC State in Transport Studio!

Hi people/collegues,
I am trying to use NWDI.
step1. A track is configured. -> OK
step2. Create a SC and adding dependencies (Production State: developed or planned). -> OK
step3. Adding an SC to the track -> OK
Going to the Transport Studio and after check-in the dependencies,my SC is directly in Assembly and not in Development . Why?
Any advice? It is important.
Thanks in advance for your replies.

Thanks for your replies.
My track definition contains the SCs for the development and the development system is checked in the runtime systems of the track.
Is not possible that my SC is in "assembly" because it is considerates as an unit assembly at the beginning?
Then only the DCs could be change the own status from dev to consolidation?
Best regards,
Mirco.

Immport Failed in Transport studio

Hi experts,
While importing the SAP-JEE.sca, SAP_BUILDT.sca and SAP_JTECHS.sca files in transport studio in CMS I am getting the following error whn importing SAP-JEE.sca file itself.
Info:no changes on the CBS request queue (ZES_Test_D) after a waiting time of 14430000 ms
Fatal:The request queue is not processed by the CBS during the given time intervall => TCS cannot import the request because queue is not empty
Fatal:Please look after the operational status of the CBS.
Fatal Exception:com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: The request queue is not processed during the given time intervall. Please look after the operational status of the CBS.:communication error: The request queue is not processed during the given time intervall. Please look after the operational status of the CBS.
com.sap.cms.tcs.client.CBSCommunicator.importRequest(CBSCommunicator.java:370)
     at com.sap.cms.tcs.core.CbsMakeTask.processMake(CbsMakeTask.java:120)
     at com.sap.cms.tcs.core.CbsMakeTask.process(CbsMakeTask.java:347)
     at com.sap.cms.tcs.process.ProcessStep.processStep(ProcessStep.java:77)
     at com.sap.cms.tcs.process.ProcessStarter.process(ProcessStarter.java:197)
     at com.sap.cms.tcs.core.TCSManager.importPropagationRequests(TCSManager.java:376)
     at com.sap.cms.pcs.transport.importazione.ImportManager.importazione(ImportManager.java:227)
     at
Give me your suggestions
Regards
Harshavardhan

Hello Harshavardhan
Please check the following;
-the engine is running and that CBS is running.
-idlestart is set to false.
-Can you please log on to the CBS Web UI (Component Build service link
on top of the CMS UI page) and do a search for requests (requests tab
in the CBS UI) in the buildspace. Do check and
let us know whether there are any requests that are queued or failed.
As you see in the error log the TCS cannot import the request
because queue is not empty and can be caused for any problem in
previous request.
Thanks
Kenny

NWDI check-in of CMS transport studio has no entries

Similar Messages

Maybe you are looking for