NWDI- check in tab is disabled and no SC is displayed to check in
Hi,
I have run NWDI schenario and configured everything..SLD, DTR, CBS, namepace...then I have also created product and software component and defined dependencies.....
Now I have created new Track for my sfotware component ...but when I tried to check in the SCs, i found that check-in tab is grayed out and disabled.
no SC is shown there to check in.
Could some one please help me in resolving my issue.
Regard
Saurabh.
Hi Graham,
Thanks for your reply....!
CMS directory is created and is accessible to everyone..!
Also check-in is disabled in the DEMO track which is created during the template run.
Is there anything else i'm missing in my Configuration..!
regards,
Saurabh
Similar Messages
-
Create a log in tab in tab control and to create one of the tab is disabled and grayed
Hello there
Can you helpme to solve my question about log in in tab control? So basically i have two page in a tab control, page 1 contains log in such as username, password and login button and second page is nothing. After the user input the correct username and password into the string form, page 1 will be disabled and grayed and autmoatically will be in page two? I also upload the vi that i created and please correct me if i have something wrong about my vi.
Please help me with this asap, because i have assignment based on the lab view about client server.
Thanks
Solved!
Go to Solution.
Attachments:
Untitled 112.vi 19 KBHi,
Aaa.. the blue box is an Enumeration Constant. Because I've used something like this you cannot change the name of the Tabs. To fix it:
Simply replace these two Constants with Numerical Integer Constants 0 - for the first Tab and 1 - for the Second Tab. It took me a while to understand what you wanted to say . This way you can change the name without getting an error.
I've rewritten the entire VI in order to be clean (I was ashamed of the previous one). You can still use the first one.
Just an advice: Even if it looks at the beginning more complicated try to use Event Structure all the time when you have buttons. The use of loops with buttons and if structure (like in your vi) creates a lot of problems and it's hard to debug.
Paul
Attachments:
password.vi 35 KB -
why FF6.0.2 always checks compatibility when opened and opened 2 tabs - firefox page and homepage? Is there a way to disable? It's rather annoying
See these articles for some suggestions:
* https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved -
HELP! On PC reboot all my extensions get disabled and each one opens a new Tab!
Help!!!
On PC reboot all my extensions get disabled and each one opens a new Tab!
I have seen 2 threads here about this issue and a few more by googling the problem.
However nothing, nothing, noithing... worked!
Win7, MS Office 2007, Sony Vaio SZ1VP, FF 10.0
and:
>
Download Unlimited 1.0, Read it Later 2.1.4, Pixlr Grabber 2.1.1, Cool Preview 3.5, Telyfi 1.2.5, Speed Dial 0.9.6.4, Google shortcuts 2.1.7.1, Scrapbook 1.4.9, Screen Grab (fix Version) 0.9.6.3c, Vertical Toolbar 0.2.6, Google Translator for Firefox 2.1.0.1, TinEye Reverse Image Search 1.1, Grooveshark Premium, 2.0.2, Quick Maps 1.5.0.
>
To try to solve this issue, I:
Uninstalled:
Antivirus (BitDefender)
PC Cleaner (CCCleaner)
Flash,
Java,
Shockwave,
MediaPlayer...
FF (deleting all the settings).
Then reboot twice for safety.
Then re-installed Java, Flash, Shockwave.
Reboot once more.
Re-installed FF, reboot once more.
Checked that all the plugins were updated, and only then I finally installed my extensions.
Checked that the user.js and preferences.js were not read only.
Everything worked fine (even FF restart) until the next OS reboot!
Then it all strated again!!!!!! It's driving me crazy!!!! Please, help! Machine cannot defeat man... or, better, machine can defeat me, but not the whole of the FF community!!!!!
Please, I must get to the end of this story! Help!!!
TommasoNM, got it fixed. Thanks!!!
-
"waht you hear" (disabled and unplugged devices checked) not in recording devices
["waht you hear" (disabled and unplugged devices checked) not in recording devices? I have scoured the windows7 and creative forums and cannot find a solution.
PLEASE HELP!
I did a fresh re-install of windows7 32bit.
The previous install was running Creative Driver .04.0900 for an onboard Sound Blaster 24bit
chip(CA006-DAT), on a MSI/K8N/NEO4/SLI/Platinium mobo.
I open audio controls, then recording devices. Check disabled and disconnected devices.
"What you hear" appears and I am able to beat match Arkaos, R4, Gforce,...
The current install, same hardware, installed Creative Driver .04.0900 as well as Creative
Audio Control Panel and Creative software Autoupdate thru Windows Update.
I open audio controls, then recording devices. Disabled and disconnected devices were already
checked. "What you hear" not listed, only Microphone, CD Audio, & Line-In.
If I open properties for devices, Recording or Playback, there is now a Sound Blaster tab. Open SB
tab and select settings for Creative Audio Control Panel.
Hedphone Detec., Performance, Restore Defaults, Speakers, EAX Effects, CMSS-3D, SPDIF I/O tabs on
panel.
"What you hear" device shows up nowhere.If u have a Dell Branded X-FI sound card and are using vista there is no "what u hear" go to the Dell XPS forum and read the FAQ at the top of the forum. "Stereo Mix/What you hear/waveout mix"
-
Disabling partner data tab at header and item.
25.11.2008
Hi friends,
Is there any user exit to disable 4 out of the 5 partners in the partner functions tab at header and item level as my requirement is not to allow the user to change the partner functions SP, SH,BP,PY. I cant use SHD0 or use the not-changeable function in VOPA hence the need for user exit.
Please suggest.
Regards,
UdaynathDear Udaynath,
try with:
Path: SPRO --> IMG --> Sales and Distribution --> Basic Functions --> Partner Determination --> Set up Partner Determination
Choose Activity: Set Up Partner Determination for Sales Document Header
Select Partner: TA, and click: Partner Function in Procedure
Give Work Area as, say TA and WE (or SH).
Now, in next screen, click Box: N, to avoid changes in Sales Doc. i.e. Sales Order.
Similary, maintain for Bill-to-Party and Payer.
User won't be able to make changes in Partner Fucton in Sales Doc.
Best Regards,
Amit -
My ipad 3 is disabled and check ur itune u
what shall i do
my ipad 3 is now disabled and asks me to check itune u and i don't have any accounts on itune u or icloudIf you have forgotten the passcode for the lock screen, follow this article:
iOS: Forgot passcode or device disabled
If you don't have one, you can set up your Apple ID by following the steps in this article:
Apple - Support - Apple ID -
Hello, dear Colleagues.
User with administrators rights cannot change printer properties on "Advanced" tab from "Devices and Printers" on Windows Server 2012 R2.
If to launch "Devices and Printers" on server, all printer properties on "Advanced" tab are inactive (see screen below).
But I can change it manually with "Print Management". Features become active.
The main purpose - to uncheck "Enable advanced printing features" with powershell
scripts.
$erroractionpreference = "continue"
$colPrinters = Get-Wmiobject -Class win32_printer -computername print_server -Filter "Name like 'printer1' or Name like 'printer2' or Name like 'printer3' or Name like 'printer4' or Name like 'printer5' or Name like 'printer6'" # get printers on server and filter with names
ForEach ($objPrinter in $colPrinters) { # get printer details from WMI
If ($objPrinter.RawOnly -ne "True") { # check that Advanced printing fetaures is turned on
Write-host $objPrinter.Name
Write-Host $objPrinter.RawOnly
$objPrinter.RawOnly = "True" # Untick and update the object in WMI
$objPrinter.Put()
It works on Windows 7 workstation, but does not on print server Windows Server 2012 R2 with error
Exception calling "Put" with "0" argument(s): "Generic failure "
At \\print_server\c$\DisableAdvancedPrintingFeatures.ps1:8 char:17
+ $objPrinter.Put()
+ ~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : DotNetMethodException
Can you help me with that? Look like somethings with rights.
Thank you.Hello, Alan
Morris.
Thanks for your reply.
I've tried to runs PS Script both locally and remotely, previously running Powershell ISE as Administrator.
I've noticed interesting thing - if to
check "Enable advanced printing features"
manually thru Print Management snap-in, script works fine. But, time to time after some manipulations on print server, this advanced feature returns to enabled state automatically by system, I think. In this case PS Script does not work. Next, if to disable
feature manually again (thru Print Management snap-in),
and enable manually again, PS Script will work. Very strange situation.
Thanks. -
Currency Conversion TAB is Disabled in Query Designer !
Hi All
When I create a selection under STRUCTURES, currency conversion tab becomes disabled...wheras if I create a FORMULA, I can see the Currency conversion TAB...
But I need to do the conversion in SELECTION KEY FIGURE..Could I know why that happens??
Thanks
BI Learner
Edited by: SAP BI Learner on Dec 4, 2008 5:03 AMhello,
Firstly, the data type of the keyfigure which u have used in the selection should be of type Currency.
Also,
Have you created the currency key.create the currency key in RRC1 transaction and check.
Regards,
Dahnya -
Had some problems with Firefox being ridiculously slow yesterday, so I updated in the hope of speeding it up. Big mistake. Firstly, the 54 tabs I use for work were all replaced with Fast Dial screens. Assuming the add-on had gone rogue, I removed it, but am still having more problems.
All my tabs have gone mad. For one thing, any time I open a new tab, enter an address into the address bar and press Enter, or select an address from the Autocomplete menu, it does nothing. Only if I click a link that opens in a new tab can I open a new tab and get it to navigate to an actual address, but then, I can't access my other tabs until I've closed the new one. Also, all the Close Tab buttons have vanished from my tabs. To fix this, I have already tried:
a) Disabling hardware acceleration, which made no difference.
b) Starting in Safe Mode, which worked, so I went through my add-ons, narrowing it down. The problem appeared to be caused by Tab Utilities, so I disabled it, which solved the address entering problem. However, the Close Tab buttons were still absent, so I made the mistake of trying to find another tab management add-on that would be compatible with this version of Firefox. Found out the hard way that Tab Mix Plus and Tab Utilities Lite aren't, because the previous problem returned, but even now I've disabled both those add-ons (I think: can't double-check without closing this tab and losing the message), I still can't navigate to addresses in new tabs or look at any tab other than the most recent one I have open.
Any ideas what to do about this, please?To check extension status, you can open a new instance of the Add-ons page by pressing Ctrl+Shift+a. This should open in a new tab next to the current tab. When disabling an extension, it often is necessary to restart Firefox before it actually is disabled (in that case, Firefox shows a link above the extension). To close that tab, you can use Ctrl+w.
I'm not sure why Tab Mix Plus would cause a problem using the address bar. Perhaps it is interacting with another add-on??
Could you describe the problem with the close tab buttons in more detail? Previously, it was possible to easily ''hide'' them on background tabs but now if the background tabs are wide enough they are always visible. There probably is a custom style rule (user style) to tackle that issue, but I'm not sure that's the problem you're having.
Not sure if this is relevant, but the Facebook Disconnect, Google Disconnect, and Twitter Disconnect extensions have been superseded by the (consolidated) Disconnect extension. They've switched from having individual icons inside the address bar to a single D button on the toolbar. Maybe that will help? -
Deactivate Tab "Balances Choose" and "Get Excise invoice" in J1IIN screen
Hi,
Client requirement is to deactivate Tab "Balances Choose" and "Get Excise invoice" in J1IIN screen,
Kindly suggest the possibilities to make the same beacuse we have tries to do the same through se51 and se80 but am not able to make the same.
Regards,
ShivHi,
Why do you want to disable Balance tab? This is needed to check the balances under immediate utilisation scenario.
For Get excise invoice option SAPMJ1IK is called. You cannot staright away change the standard code via Se38/SE80.
You should either copy the standard code and develop your own Z program to disable the field or can check for Userexit if any.
Regards,
Brinda -
Why has right click to open new tab become disabled?
SINCE UPDATING FIREFOX:
RIGHT-CLICKING TO OPEN NEW TABS DOES NOT WORK ANYMORE. HOW DO I REVERSE THIS???
AND
FIREFOX CRASHES VERY OFTEN NOW. HOW DO I STOP OR AT LEAST MINIMIZE FREQUENCY OF CRASHES???Regarding the right-click context menu, which is the best description of the problem:
# Can no longer right-click links
# Open in New Tab is missing or grayed on the context menu
# Open in New Tab does nothing when selected
# Open in New Tab opens in the same tab when selected
Does the site make any difference or do you have this problem on all sites?
Sorry to hear about the crashes. When Firefox crashes, it usually records information about what was happening at that moment. You often will see the Mozilla Crash Reporter dialog come up. You can submit that data to Mozilla and share it with forum volunteers to see whether it points to the solution. Please check the last section of the support article "[[Firefox Crashes]]" for steps to get those crash report IDs, and then post some of the recent ones here.
If that's not possible, could you test in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
''If Firefox is not running:'' Hold down the Shift key when starting Firefox.
''If Firefox is running:'' You can restart Firefox in Safe Mode using either:
* "3-bar" menu button > "?" button > Restart with Add-ons Disabled
* Help menu > Restart with Add-ons Disabled
and OK the restart.
''Both scenarios:'' A small dialog should appear. Click "Start in Safe Mode" (''not'' Refresh).
Any less crashy? -
I have downloaded the latest Adobe Flash - it says successful but will not work. It says to 'Manage Plug-ins but the Plug-in says it is enabled but it will not work at all. I have tried disabling and then enabling - no success. Please help!
There's two different versions of Flash. The ActiveX version for IE, and the Plugin version for other browsers. Did you install the correct version? This forum's software doesn't thing that Flash is installed for Firefox or the Plugin is disabled.
1.Download the Flash setup file from here: <br />
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. <br />
Save it to your Desktop.<br />
2. Close Firefox using File > Exit <br />
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, <br />
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
4. Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). <br />
See this: <br />
[http://vistasupport.mvps.org/run_as_administrator.htm] -
Disable + and - symbols in grid
how can i disable + and - symbols in grid can any one tell me pls
Edited by: 991774 on Mar 5, 2013 10:38 PMhttp://docs.oracle.com/cd/E28394_01/pt852pbh1/eng/psbooks/tapd/img/sm_BodyAreaRowActionButtonPropertiesSample_tapd.png
Row Action Buttons
Select to display Insert and Delete buttons on each grid row at runtime. The action buttons can appear on the left or right side of the grid. Click the Properties button to open the Body Area Row Action Button Properties dialog box.
http://docs.oracle.com/cd/E28394_01/pt852pbh1/eng/psbooks/tapd/img/sm_GridPropertiesUseTab_tapd.png
No Row Insert
Suppresses the Add button in the body area so that the user cannot insert rows. If this option is selected, PeopleSoft Application Designer automatically selects and disables the Invisible check box on the Insert tab of the properties dialog box for the body area.
No Row Delete
Suppresses the Delete button in the body area so that the user cannot delete rows. If this option is selected, PeopleSoft Application Designer automatically selects and disables the Invisible check box on the Delete tab of the properties dialog box for the body area.
More detail to be found in PeopleBooks > PeopleTools 8.52: PeopleSoft Application Designer Developer's Guide > Using Scroll Areas, Scroll Bars, and Grids -
General Documentation tab is disable
Hi
1.In SOLAR01/02 General Documentation tab is disable?what i have to to enable?
2.In SOLAR01 structure table are disable even after the UNLOCK the structure?
please help me.
Regards,
SwaroopHi,
1) Are you talking about an implementation project? check your project type in solar_project_admin.
Gen documentation tab is only meant for template projects ! The information you store on this tab will be made available in read only mode to the implementation projects you derive from this template (see tab scope for the implementation tab in solar_project_admin, you first need to build a template within your template project -> see tab template in solar_project_admin and assign proper scenarios to it via solar01, structure tab).
Above solution will not help, you can only steer the visibility of the tab.
2) in addition to solution mentioned above, check tab Proj. Team member: is your user-id in the list when the checkbox "restrict changes to nodes..." is checked.
Good luck,
Geert
Maybe you are looking for
-
Adding a 2nd hard drive to a p6-2026
I want to install a second hard drive to my p6-2026 desktop to be used for auto backup. when I open the case it looks like their is no way to do this.
-
hey i've been having trouble with my ipod for a week now. the motor inside starts to wind up then just stops,and continuously does this. anyone no why? or how to fix it? i tried restoring the settings, but my computer doesn't recognise the device, an
-
ATSServer hogging processor & a fix
There seems to be some issue with the ATSServer gradually increasing its CPU usage to an unreasonable rate. Three times today it's happened, and after doing a bit of research, I've found a remedy that seems to work. As to why it works, I don't know.
-
Print Issue - Normal Behavior?
When using the right click menu in Explorer to print a PDF file, the file prints fine but the Reader (v10.1.3) stays open with no file loaded. Is there a setting to change this behavior so the program closes when the printing is completed? Thanks, R
-
I can't access my gift card though the account balance is shown in window when I sign in to I store. When I try to purchase a song, site requests me to sign in for billing information. When I do this, it just keeps replacing the same window with sa