NWDI SP13 installation on J2EE Sp11 can works ?
I need to clarify the following:
I have a J2EE 640 Sp11, with EP and KM installed , both at Sp11.
I have to install the NWDI sp13.
I need to clarify if it can works with J2EE sp11, or before that I have to upgrade the J2EE to sp13.
The NDWI installation guide require only J2EE SP04, but it's quite old.
The Upgrade guide sp13 for the NWDI sp13 has the prerequisite the upgrade the J2EE to Sp13.
What I have to do ?
Regards
Hi Mauro,
> The Upgrade guide sp13 for the NWDI sp13
> has the prerequisite the upgrade the J2EE to Sp13.
>
> What I have to do ?
Upgrade?! For different reasons:
- EP/KM SP11 is old and buggy. Not that SP15 is bug-free, but the situation is much better
- If the prerequisite to upgrade the J2EE to Sp13 is stated, in any support case you will be pointed to that.
Hope it helps
Detlev
Similar Messages
-
I've lost CS5 Design Premium Teachers Edition CD Installation Package. How can I download it? Typical version of CS 5 Design Premium is not working with my serial number. Can someone help me?
Łukasz%20Molenda if you purchased Creative Suite 5 from Adobe directly, and choose the download option at the time of purchase, then the download will be available in your account at http://www.adobe.com/. You can find additional details at https://helpx.adobe.com/creative-suite/kb/find-download-link.html.
If you purchased the software on a DVD and your current computer does not have an optical drive then you can copy the installation files to a USB drive on a computer which does contain an optical drive. -
Since the installation of Mavericks, Time capsule works very slowly and will need 30 days or more to produce a complete backup of about 200 GB. What can I do to get a complete backup more rapidly ?
What setup is the TC now.. ? what model and what firmware? Maverick seems to need 7.6.4 on the older TC.. and latest firmware on the AC version.
Is it in router or bridge mode? Do not use wireless only.. join a wireless network.
Is the computer connected by wireless or ethernet? I strongly recommend a test by ethernet.. with wireless in the computer turned off. If it is still very slow something is majorly wrong.. but I need the info I asked for to troubleshoot further. -
Installed QuickTime7 from Snow Leopard 10.6.8 installation disc and still can't view videos on iPhoto. A box appeared saying "you have installed Mac OS X software older than your current version of Mac OS X and may not work properly." Now what?
Download and install the latest QuickTime Player for Snow Leopard > http://support.apple.com/kb/DL923
-
Lomboz J2EE View not working always give such type error
java.lang.NoClassDefFoundError: org/apache/jasper/Options
at com.objectlearn.jdt.j2ee.core.Project.initContainers(Project.java:370)
at com.objectlearn.jdt.j2ee.core.Project.init(Project.java:102)
at com.objectlearn.jdt.j2ee.core.Project.<init>(Project.java:43)
at com.objectlearn.jdt.j2ee.core.Project.getWorkspaceProjects(Project.java:427)
at com.objectlearn.jdt.j2ee.ui.ContainerView.init(ContainerView.java:334)
at com.objectlearn.jdt.j2ee.ui.ContainerView.<init>(ContainerView.java:99)
at com.objectlearn.jdt.j2ee.ui.J2EEView.createViews(J2EEView.java:241)
at com.objectlearn.jdt.j2ee.ui.J2EEView.createSashForm(J2EEView.java:262)
at com.objectlearn.jdt.j2ee.ui.J2EEView.createPartControl(J2EEView.java:306)
at org.eclipse.ui.internal.ViewReference.createPartHelper(ViewReference.java:370)
at org.eclipse.ui.internal.ViewReference.createPart(ViewReference.java:227)
at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:592)
at org.eclipse.ui.internal.PartPane.setVisible(PartPane.java:299)
at org.eclipse.ui.internal.ViewPane.setVisible(ViewPane.java:531)
at org.eclipse.ui.internal.presentations.PresentablePart.setVisible(PresentablePart.java:179)
at org.eclipse.ui.internal.presentations.util.PresentablePartFolder.select(PresentablePartFolder.java:268)
at org.eclipse.ui.internal.presentations.util.LeftToRightTabOrder.select(LeftToRightTabOrder.java:65)
at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation.selectPart(TabbedStackPresentation.java:400)
at org.eclipse.ui.internal.PartStack.refreshPresentationSelection(PartStack.java:1256)
at org.eclipse.ui.internal.PartStack.createControl(PartStack.java:668)
at org.eclipse.ui.internal.PartStack.createControl(PartStack.java:576)
at org.eclipse.ui.internal.PartSashContainer.createControl(PartSashContainer.java:564)
at org.eclipse.ui.internal.PerspectiveHelper.activate(PerspectiveHelper.java:270)
at org.eclipse.ui.internal.Perspective.onActivate(Perspective.java:931)
at org.eclipse.ui.internal.WorkbenchPage.setPerspective(WorkbenchPage.java:3479)
at org.eclipse.ui.internal.WorkbenchPage.busySetPerspective(WorkbenchPage.java:997)
at org.eclipse.ui.internal.WorkbenchPage.access$18(WorkbenchPage.java:981)
at org.eclipse.ui.internal.WorkbenchPage$18.run(WorkbenchPage.java:3578)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:67)
at org.eclipse.ui.internal.WorkbenchPage.setPerspective(WorkbenchPage.java:3576)
at org.eclipse.ui.internal.PerspectiveBarContributionItem.select(PerspectiveBarContributionItem.java:123)
at org.eclipse.ui.internal.PerspectiveBarContributionItem$1.widgetSelected(PerspectiveBarContributionItem.java:92)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:227)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:938)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3682)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3293)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2389)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2353)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2219)
at org.eclipse.ui.internal.Workbench$4.run(Workbench.java:466)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:289)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:461)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:106)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:106)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:76)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447)
at org.eclipse.equinox.launcher.Main.run(Main.java:1173)
How to remove this type of error please help me. I need help.plz replyWhat version of Lomboz are you using? J2EE View was available in Lomboz 2.x releases and is not found in later releases. These olde versions used a lightweight JSP editor based on jasper. Your message looks like it is related to that.
I would recommend upgrading to one of the later releases such as 3.3, which can be found at:
http://lomboz.objectweb.org/downloads/download.php
If you have to pursue your current version, you can post your Lomboz releated help messages at and we will try to help you:
http://forge.objectweb.org/forum/forum.php?forum_id=360 -
Default Installation on LVM is not working
New Thread (Default installation of LVM not working):
First I did everything exactly as the LVM guide tells me. Then I continued with the Installation Guide. No extra options, no change from defaults. When I try to boot it, it fails.
I tried downgrading to 2.02.103-1. No result.
Old Thread (when I did not know that LVM was at fault):
Current state:
EDIT5: OK I have boiled it down to LVM. When I copied all files from etcvol to /etc in root it continued booting until it hit mounting /home... I have no idea what the §$%&/ is wrong.
Everything that is not root and should get mounted by fstab from LVM dies o.O
Even stranger: After I removed homevol and swapvol from fstab i get stuck at
A start job is running for dev-sdb4.device
I did a "proof of concept" installation just now and it worked out of the box.
Parameters of the "proof of concept" installation:
/dev/sda5 ext4 /
/dev/sda4 EFI /boot
Rest is default installation guide
Gummiboot:
title Arch Linux
linux /vmlinuz-linux
initrd /initramfs-linux.img
options root=/dev/sda5 rw
Changed Parameters of the broken installation:
/dev/sda3 LVM on LUKS
Partitions
/dev/mapper/MyStorage-rootvol ext4 /
/dev/sda4 EFI /boot
/dev/mapper/MyStorage-swapvol swap
/dev/mapper/MyStorage-homevol ext4 /home
title Arch Linux (Encrypted)
linux /initramfs-linux.img
options initrd=/initramfs-linux.img cryptdevice=/dev/sda3:MyStorage root=UUID=$UUIDofRoot rw
I added the HOOKS
HOOKS="... encrypt lvm2 keymap ... filesystems ... shutdown ..."
Fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# UUID=767d41f7-afb5-4a9f-a39b-604c830654e7
/dev/mapper/MyStorage-rootvol / ext4 rw,relatime,space_cache 0 0
# UUID=6e00082a-4fc4-47a5-9e80-e2330428d2fe
/dev/mapper/MyStorage-etcvol /etc ext4 rw,relatime,space_cache 0 0
# UUID=ce066cf1-230a-48b4-b7a8-2635ef39a881
/dev/mapper/MyStorage-homevol /home ext4 rw,relatime,space_cache 0 0
# UUID=0C88-FA2A
/dev/sdb4 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
# UUID=9369aa55-d055-4fab-98ef-ccc97b3f3e05
/dev/mapper/MyStorage-swapvol none swap defaults 0 0
So what goes wrong? I can't provide the exact logs as the journal persistency module dies in this case. If you know a way to get the actual files please tell me.
Everything works fine down to "Reached target Local File Systems"
He runs some isEmpty checks on tmpfiles.d directories which some succeed and /etc/tmpfiles.d and /usr/local/lib/tmpfiles.d fail
systemd-tmpfiles --create --remove --exclude-prefix=/dev gets forked
journald gets killed by systemctl
systemd-tmpfile SIGCHILDs and dies
systemd-udevd gets notified and changes from start to running
udevd-control.socket gets changes to running
system-tmpfiles-setup exits with failure
Failed to start Recreate Volatile Files and Directories
systemd-update-utmp gets forked
accepts connection on private bus
10 times dbus request: org.freedesktop.dbus.local.disconnect() on /org/freedesktop/dbus/local
SIGCHILD from systemctl belonged to systemd-journal-flush.service
Failed to start Trigger Flushing of Journal to Persistent Storage
more dbus request: org.freedesktop.dbus.local.disconnect() on /org/freedesktop/dbus/local
systemd-update- from systemd-update-utmp SIGCHILDs and dies
Failed to start Update UTMP about System Reboot/Shutdown
starts system initialization sysinit.target -> active
starts dbus.socket to listeing
starts sockets.target to active
systemd-tmpfiles-clean.timer gets started by monotonic timer to cleanup
dbus-daemon gets forked
dbus.socket from listening to running
systemd-logind gets forked
Failed to start D-Bus System Message Bus
Failed to start Login Service
I had a look at higher debug levels, but they all just showed systemd starting something which either failed or in the case of D-Bus died soon after.
When I broke into init, I could see the volumes which contained what they were supposed to contain.
Except that nothing really interesting. I noticed a complaint that the AHCI driver should be replaced against a specialized one. But I don't think thats the problem.
Thank you for your help!
Last edited by GNA (2014-01-15 21:44:01)Removed the fsck filehook.
posted the fstab.
Boot logs will follow shortly. I just have to figure out how to get them in file form when the journal does not contain anything.
EDIT: OK I have no idea how to get my own boot logs sad but true. ill just try to add as much context as I can see but I can't possibly write all of this down by hand.
EDIT2: Ah no wonder when flushing of journal to persistent storage fails
EDIT3: Ill just start decreasing the complexity one by one. And as it is so easy ill start with btrfs.
EDIT4: Changing btrfs to ext4 did not change anything.
EDIT5: OK I have boiled it down to LVM. When I copied all files from etcvol to /etc in root it continued booting until it hit mounting /home... I have no idea what the §$%&/ is wrong.
Everything that is not root and should get mounted by fstab from LVM dies o.O
Even stranger: After I removed homevol and swapvol from fstab i get stuck at
A start job is running for dev-sdb4.device
EDIT6: Today I tried to make a "failsafe" system with lvm and luks. Turns out it is not failsafe.
First I did everything exactly as the LVM on LUKS guide tells me. Then I continued with the Installation Guide. No extra options, no change from defaults. The result is the very same I currently have.
EDIT7: Now that I think about it; There was something strange during pvcreate /dev/mapper/lvm. It complained: "/dev/sdc: open failed: No medium found" which is strange as there was never a /dev/sdc to begin with.
I'll try to install on a pure LVM partition without crypto.
EDIT8: OK pure install only LVM is also broken.
Last edited by GNA (2014-01-15 20:46:49) -
I have installed executable installer but I still can not use adobe flash player 10.1
I have installed executable installer but I still can not use adobe flash player 10.1 and i cant not find it on my
documents. I do not know what to do? My computer is XP and Internet Explorer.
Why won't it let me download it or use it?Can you see the Flash animation at http://www.adobe.com/software/flash/about/ ? If yes, Flash Player is correctly installed and working.
If not, what files do you have in C:\Windows\system32\Macromed\Flash ? -
If the occi can work with TUXEDO well ,is there any restricts?
we want to use occi to access oracle in TUXEDO serive.
If the occi can work with TUXEDO well ,is there any restricts?
who can describe how to use , step by step.
THS a lot !
mails:[email protected]Hi,
Yes OCCI can be used to access Oracle database from Tuxedo. If you want Tuxedo to manage transactions for you then you need to follow essentially the same approach as in using OCI or Embedded SQL. Since you are accessing a resource manager, you will need to define an OPENINFO string in the Tuxedo RM file located in the udataobj directory of the Tuxedo installation. Likewise you will need to build an RM specific TMS for the Oracle Database and specify the name of the RM entry in the buildtms and buildserver commands with the -r switch.
Before going into a step by step set of instructions, can you describe what you know about Tuxedo and OCCI? Have you built Tuxedo servers before and have they accessed a resource manager?
Regards,
Todd Little
Oracle Tuxedo Chief Architect -
I am trying to use powerpoint but when I open a document I want to work on it does not open on my desktop. It appears as open on mission control but it disappears offscreen. How can I get it to open where i need it and can work on it?
It's almost certainly too late.
The time to create a backup is before a catastrophe. After a catastrophe, it's too late. -
Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?
try xxx - may work
_may_ work. -
I installed elements 12 on a Win 8.1 computer and moved all my photos from my old XP machine. I updated to elements 12.1. Now, many/most of my photos will not open because I do not have "permission" to open the files. How do I fix this so I can work with MY photos?
Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think? -
I've just started working for a media company that provides the music for sporting events. They use iTunes to create playlists that I have to load into an IR machine with hot keys. I also have to edit tracks to create new stings and intros. As there is a 2.5 hour commute, I want to access the work iTunes library from my home MBP so I can work from home. When I'm at work I can share the work iTunes library, but when I'm back home I can't use it. Any ideas of how I could effectively Home Share over the internet with two seperate iTunes accounts?
The work iMac is running 10.7.5 and my MBP is 10.8.4In that case, does anybody know of a program or workaround that will make this so?
-
How to use a dropdown in a workbook which can work in different queries?
Hi Experts,
I have created a workbook which can display the query by using the 'Push Button'. One query is based on material analysis and another one on product analysis.
It works good..
In that workbook, I want to use a dropdown so that it can display the required key figure. (Note : In both the queries, key figures are same.)
While selecting the keyfigure option in the properties of dropdown, the target data provider is not visible.
So, pls help me to use the dropdown which can work in both the queries.
With Regards,
Yokesh Kumar.Hi,
After fixing the error in the role I noticed that all I should do is to publish the querry in a new role.
From that moment a user that is tied to new role can read the old report using the rights associated in a new role.
Thanks for help.
Regards. Leszek -
The apple store is so unhelpful. I have an iMac computer operating on Mac OSX 10.5.8. I want to upgrade to the latest Mountain Lion operating system so I can work with the iCloud on my computer and download my emails. I can't seem to purchase this on-line as it keeps telling me to go to the app store. I haven't got the app store on my computer as I am told I need iCloud for which I need the new operating system, which I can't download or purchase as I am sent back to an instruction telling mee to go to the app store icon.
How difficult can it be to simply purchase the software on-line have it shipped to you so you can install it, in the event it cannot be downloaded as it appears it can't be based on my curent operating systems being Mac OSX 10.5.8.Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple have withdrawn Snow Leopard from download, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $30. You can also purchase the code to use to download Lion from the same number.
Requirements for Mountain Lion:
http://www.apple.com/osx/specs/ -
LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.
Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.
Maybe you are looking for
-
My ipod keeps searching for network, even when the network info is all set properly. It has suddenly started doing this. Also, buffering forever... I have tried to reset the network few times, but not working.
-
Sorry for asking a very simple (hopefully) question. Does anyone know how can remove spaces from a given field. One of my field has the following: field1 = ' ABCD'. What command should I use so field1 would end up with just 'ABCD'? Thanks.
-
Acrobat Pro XI locks up during "Reduce File Size"
In Acrobat Pro XI, when I "Reduce File Size", the software crashes, when the "Analyzing Document" phase is ~ 50% complete. Any fixes?
-
Group policy for SNMP configuration
Experts, We have mix of 2003 and 2008 servers. Some of the servers already have SNMP settings configured through registry etc. We want to populate traps information, community name and accepted community name etc on all servers. How can we do this th
-
How to Install 5.0 app on lower versions of device
How to Install 5.0 app on lower versions of device Is There any possible way to do so , please help me out its very urgent .. without any code changes or with !! ??