NWDS 7.11 ceclt nwcetool is missing
Hi!
After installing NWDS 7.1 EhP1 I now urgently miss the ceclt tool which was formerly (in NWDS 7.10) located under ...SAP\IDE\CE\eclipse\tools\nwcetool\
I need this tool urgently to convert my EAR project to an SDA file using the ceclt function createsda, because at customer's site deployments are only allowed using JSPM.
Where can I find this functionality in NWDS 7.11?
Despite from the format conversion from ear to sda I need this tool to explcitely set vendor and version number. A direct deployment form NWDS always sets sap.com as vendor and a timestamp as version.
Please help!
Thanx in advance!
Regards,
Volker
Hello Volker
As of 711 the tools are located inside the DICLIENTS.SCA (also the
nwcetool you are looking for).
From 7.11 onwards the DI commandline tools are not provided in the
eclipse/tools folder anymore.
Instead they are provdided in NWDS as an eclipse application and in
DICLIENTS SCA as deploy archive tcdicmd_tools~sda.sda
This SDA is deployed per file system deployment. Alternatuvely this SDA
can be extracted from the SCA and then unzipped to get a ZIP archive
that contains the DI command line tools.
You find the SCA here:
http://service.sap.com/patches > Support Packages and Patches - Entry
by Application Group > SAP NetWeaver > SAP NETWEAVER > SAP EHP1
FOR SAP NW CE 7.1 > Entry by Component > NW Development
Infrastructure > DI CLIENTS 7.11
See also the document:
http://help.sap.com/saphelp_nwce711/helpdata/en/48/2d5321916c4bb8e100000
00a42189b/frameset.htm
Thanks
Kenny
Similar Messages
-
No Quick PAR Upload in NWDS 7.10 ?
Hi,
I installed the new NWDS 7.10, but I'm missing the upload function to the portal for my Portal Application. In previous version I used the Quick PAR Upload & the Backend System Configuration.
In the new Version 7.10 I've done the Backend Config too, but I didn't find any button or menu managing the deployment to the portal.
I checked out other treads on SDN allready, but only found hints relating previous versions of NWDS.
(e.g. How to deploy PAR File on portal??)
Does anyone have a hint?
Thanks.
MichaelHi Paraveen,
thanks for your fast reply. O.K., back to the roots. Think I have to use the uploader in the portal..
Have a nice day.
Michael -
Changes in lea component.
Hi Gurus.
Please help!!!!!
We are on portal 7.0 and we have to make some changes in the leave request application.
I have the DC for lea component. If I try to import it in nwds directly it gives error of missing libraries and many other references.
Please suggest if it is possible to do this without NWDI.
Also is it possible to get this dc directly in the track created instead of importing the whole ess business package in the track.
Regards;
AnzarYou import a SC from track.
With SC comes all DCs
Now until and unless you do not create a project for DC they do not come in your local workspace for modification.......
You can opt to only create "lea" project DC in workspace.
Wise decision would be to also create all dependent DCs project. (they will come as filled green triangle on DC name)
If your NWDI has been recently set up and you are the first person modifying it...then make sure it has been correctly set up.
For this refer to SAP note : 872892 (attached NWDI cookbook pdf) -
Running ant build scripts from cmd fails on Windows Server
Hi all!
I'm trying to build and package ME on a Windows Server calling the ant build script targets from cmd. This works fine on a Windows XP machine. On a Windows Server machine however the ant internal calls to nwcetool.bat are failing because -files are not found in DEPLOYARCHIVES. And these files are really not there although they should have been created by nwcetool.
Does anyone have a clue why calling ant build script in cmd on a Windows XP machine will work but fails on Window Server?
Thanks a lot!And this is part 2 :
package.sca.impl:
delete Deleting directory C:\SAP\SAPME\SDK\build\results\server\package.sca
mkdir Created dir: C:\SAP\SAPME\SDK\build\results\server\package.sca
mkdir Created dir: C:\SAP\SAPME\SDK\build\results\server\package.sca\ear
mkdir Created dir: C:\SAP\SAPME\SDK\build\results\server\package.sca\sca\BUILDARCHIVES
mkdir Created dir: C:\SAP\SAPME\SDK\build\results\server\package.sca\sca\DEPLOYARCHIVES
delete Deleting directory C:\SAP\SAPME\SDK\build\results\server\create.application.xml
mkdir Created dir: C:\SAP\SAPME\SDK\build\results\server\create.application.xml
echo 2011-04-07 09:33:45 Creating application descriptor.
xslt Processing C:\SAP\SAPME\SDK\extension\META-INF\application.xml to C:\SAP\SAPME\SDK\build\results\server\create.application.xml\application.xml
xslt Loading stylesheet C:\SAP\SAPME\SDK\build\xslt\create-application-xml.xslt
xslt ejbModule=
xslt webModule=salt-webservice
copy Copying 1 file to C:\SAP\SAPME\SDK\extension\META-INF
delete Deleting directory C:\SAP\SAPME\SDK\build\results\server\merge.application.xml
mkdir Created dir: C:\SAP\SAPME\SDK\build\results\server\merge.application.xml
echo 2011-04-07 09:33:45 Merging application descriptor "C:\SAP\SAPME\SDK\extension\META-INF/application.xml" with "C:\SAP\SAPME\SDK\build\results\server\master\resources\xml/application.xml".
xslt Processing C:\SAP\SAPME\SDK\build\results\server\master\resources\xml\application.xml to C:\SAP\SAPME\SDK\build\results\server\merge.application.xml\merged.xml
xslt Loading stylesheet C:\SAP\SAPME\SDK\build\xslt\jee-application-merge.xslt
xslt jee-application-merge: file to merge is C:\SAP\SAPME\SDK\extension\META-INF/application.xml
xslt jee-application-merge: checking for module conflicts...
xslt jee-application-merge: Base EJBs=me.activity.ejb-5.2.5.3-Base.jar m
e.alarm.ejb-5.2.5.3-Base.jar me.appconfig.ejb-5.2.5.3-Base.jar me.backgroundproc
ess.ejb-5.2.5.3-Base.jar me.browse.ejb-5.2.5.3-Base.jar me.common.frame.ejb-5.2.
5.3-Base.jar me.container.ejb-5.2.5.3-Base.jar me.correctiveaction.ejb-5.2.5.3-B
ase.jar me.customdata.ejb-5.2.5.3-Base.jar me.datacollection.ejb-5.2.5.3-Base.ja
r me.dbsequence.ejb-5.2.5.3-Base.jar me.defaultvalue.ejb-5.2.5.3-Base.jar me.dem
and.ejb-5.2.5.3-Base.jar me.integration.xml.ejb-5.2.5.3-Base.jar me.inventory.ej
b-5.2.5.3-Base.jar me.nonconformance.ejb-5.2.5.3-Base.jar me.productdefinition.e
jb-5.2.5.3-Base.jar me.production.ejb-5.2.5.3-Base.jar me.status.ejb-5.2.5.3-Bas
e.jar me.numbering.ejb-5.2.5.3-Base.jar me.diagnostics.ejb-5.2.5.3-Base.jar me.d
ocument.ejb-5.2.5.3-Base.jar me.httpserver.ejb-5.2.5.3-Base.jar me.integration.c
nc.ejb-5.2.5.3-Base.jar me.integration.collaboration.ejb-5.2.5.3-Base.jar me.int
egration.sap.ejb-5.2.5.3-Base.jar me.labor.ejb-5.2.5.3-Base.jar me.user.ejb-5.2.
5.3-Base.jar me.ods.ejb-5.2.5.3-Base.jar me.plant.ejb-5.2.5.3-Base.jar me.produc
tiondate.ejb-5.2.5.3-Base.jar me.reasoncode.ejb-5.2.5.3-Base.jar me.reporting.ej
b-5.2.5.3-Base.jar me.rtw.ejb-5.2.5.3-Base.jar me.script.ejb-5.2.5.3-Base.jar me
.security.ejb-5.2.5.3-Base.jar me.solutionverification.ejb-5.2.5.3-Base.jar me.t
imegranularity.ejb-5.2.5.3-Base.jar me.tooling.ejb-5.2.5.3-Base.jar
xslt jee-application-merge: SSP EJBs=
copy Copying 1 file to C:\SAP\SAPME\SDK\build\results\server\sda\META-INF
copy Copying 163 files to C:\SAP\SAPME\SDK\build\results\server\package.sca\ear
jar Building jar: C:\SAP\SAPME\SDK\build\results\server\package.sca\sca\BUILDARCHIVES\me.ear
echo 2011-04-07 09:33:45 nwce.tool=C:\SAP\SAPME\SDK\build\tools\ceclt\nwcetool\nwcetool.bat, nwce.tool.lib=C:\SAP\SAPME\SDK\build\tools\ceclt\lib, CECLT JDK=C:Program Files (x86)Javajdk1.5.0_22
echo 2011-04-07 09:33:45 Executing CECLT with the following arguments:
-c "createsda -n me/ear -v sap.com -l local -type J2EE -counter 5.2.5.3.330 -scn
ME -scv sap.com -deps sap.com:me/security/loginmodule BUILDARCHIVES\me.ear DEPLOYARCHIVES\me.web-ext.sda-5.2.5.3-Base" -e
exec The filename, directory name, or volume label syntax is incorrect.
exec Result: 1
BUILD FAILED
C:\SAP\SAPME\SDK\build\script\build.dev.sobsap2.xml:1665: The following error occurred while executing this line:
C:\SAP\SAPME\SDK\build\script\build.dev.sobsap2.xml:1723: Warning: Could not find file C:\SAP\SAPME\SDK\build\results\server\package.sca\sca\DEPLOYARCHIVES\me.web-ext.sda-5.2.5.3-Base.ear to copy. -
TreeByNestingTableColumn UI element
Hi,
in the "Web Dynpro UI Element Reference Guide" there is
description of the TreeByNestingTableColumn UI element.
However, in the NWDS I could not find it in any group
of UI elements. Is the NWDS support for this UI element
missing?
regards
SasaThis is a special type of table (master) column. It can only be aggregated to a table, not used standalone.
You find it in NWDS in the <b>outline view</b> of the view designer. Open the context menu on a table elment and select "Insert MasterColumn".
Armin -
Reg. files missing in NWDS
Hi all,
I am having an issue regarding NWDS i.e. when I took backup of the applications for reinstallation of NWDS, .classpath,.metamodel,.project,.tssapinfo etc files are missing from my applications. Now I am unable to open these applications in NWDS ,its giving an error that .project is missing .I reguest kindly to give your valuable suggestions for getting these file back in my applications so that i can proceed further in developing my application.I am inneed of it.
thanking you
AravindHi Aravind
When you create an "empty project you will get those missing files e g .project, .classpath. Then you just import your backuped files that contains your views, component(s), windows etc.
Of course you probably need to modify your buildpath if you have dependencies in your project that is not standard.
Maybe I'm not understanding you correctly?
Regards
Göran
Edited by: Göran Westin on Feb 20, 2008 10:07 AM
Edited by: Göran Westin on Feb 20, 2008 10:17 AM -
Missing destination type for service registry in nwds
Hi,
based on this help [Simple Sample Installation and Configuration|http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/get_mime.asp?id=B135A510223D467B89186B000A89F777&filename=Simple%3FSample%3FInstallation%3Fand%3FConfiguration.pdf&packageid=DE0426DD9B0249F19515001A64D3F462] I try to config the prerequisites to get the samples running.
Like described at chapter 3.3 SAP NetWeaver Developer Studio (NWDS) in NWDS under "Web Service Configuration" two destinations ERP and ERP_META should be created.
In my case the option "Service Registry" at "Destination Type" is missing.
May anybody help me?
Best regardsHi John,
I think the screenshot is wrong.
You can use WSIL to configure the backend system.
The WSIL url for ABAP systems is http://[host]:[port]/ sap/bc/srt/wsil?sap-client=[client_no]
Regards,
Christian -
XMAU 3.0 project export from NWDS missing jar-s???
Hi experts.
I would like to modify a standard xMAU3.0 source code. I installed MI sp 21, NWDS + MDK plug-in.
I imported the xmau 3.0 war file which contain the original source code.
I can't export the new code, because of there are some missing jar file. I found some in MI directory. (mbscore.jar ;datetimepicker.jar etc.), but I could not find the mpa.jar. This jar contains the com.sap.mbs.push.... packages
I cannot rebuild the project and create a new war file without this jar.
Where can i find this file. Or what would be the problem?
thanks a lotSolved.
The mau_eclipse.war contain the missing jar file. -
NWDS-perspective "Process Composer" is missing in the menu - why?
Hi,
after installing "EHP1 for SAP NetWeaver Composition Environment 7.1 - Preview Version" from SDN and after updating NWDS I can find about 20 different "NWDS-perspectives" via the menu (Window -> Open Perspective -> Other), but one is missing: the Process Composer for BPM.
Does anyone know how to install this feature?
Many thanks
MarkusHi Srikanth,
did you manage to get the Perspective or did you download the whole CE 7.1.1?!
Could you provide me with infos on how you solved the issue.
I have CE 7.1 following documentation, but when i try to update components, the process composer is not loaded/updated.
br -
CE 7.20 preview, missing perspectives in NWDS
Hi, after i install preview of 7.20 and nwds ce 7.20 evaluation version there was some perspectives missed. For example, Web Dynpro. I tried update it but without success.
Any suggestions?
RegardsDear Lan,
Please refer to [ Install & Configure SAP NetWeaver Composition Environment |http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b057d7e3-b89e-2b10-1e9e-c426e967f8e1]. might be you have missed some step or not extracted the NWDS zip files.
Best Regards
Arun Jaiswal -
Imported par file to NWDS, jar file missing. Where find par file structure?
Hi All,
We want to implement idle session timeout on the portal. We found a wiki here on the subject. In order to implement the solution we need to make adjuestments to com.sap.portal.navigation.masthead.par.bak. When we import this par file to Netweaver Developer Studio, the libraries and jar files are missing. So obviously it errors then in portal as files are missing.
So I could add them manually but I don't know what the file structure is on this par file so don't where to add what. Does anyone know?
Also when I export the file after manually adding the missing files, will it export all the files or will it behave the same way as the import and leave out the additional files?
If anyone could help, I'd really appreciate it,
Kind regards,
Liz.Hi Bala,
I thought of that just before you responded and it worked!! Thanks for the response..
Regards,
Liz. -
Hello,
I am using the Navigation Service in a PAR component. The jar for relevant classes like NavigationNodes.classs is in com.sap.portal.navigation.api_service_api.jar . I can find this jar on the WEBAS engine under irj but the jar does not exist in my local NWDS eclipse/plugins folder.
I can get around the problem by taking a local copy of the JAR but should'nt the jars match between engine and NWDS?
Thanks
TahirHi Tahir,
NWDS doesn't come with all the JAR files. Time to time you have to grab the jar files from portal installation directory.
prakash -
NWDS missing "Process Composer" perspective
Hello I have the following NWDS
SAP NetWeaver Developer Studio
SAP NetWeaver 7.1 Composition Environment SP07 PAT0003
Build id: 200902281924
and * there is no way to find / add "Process Composer" perspective* on it I have been in the menu : window > Open Perspective > Other and it is not there
Please can someone help me to fix that problem ?
ThanksAt the website http://sdn.sap.com/irj/scn/nw-ce-downloads it is possible to download multiple versions of the Netweaver Developer Studio with different capabilities.
SAP NetWeaver Composition Environment 7.1 SR5 Developer Edition. Download/Install for Netweaver Developer Studio has download file SDN_Preview_SR_5_IDECE71.rar
EHP1 for SAP NetWeaver Composition Environment 7.1 - Preview Version includes SAP Business Process Management Download/Install has download file CE711SP1_IDE_SDN-Preview.rar
In the details (ie not on the overview on http://sdn.sap.com/irj/scn/nw-ce-downloads ) it states version information what to use each type of download for.
Regards
Brian -
IJCOClientService class missing in NWDS
I imported some portal 5.0 projects by using the PAR-import of the SAP NetWeaver Developer Studio 2.0.9. After the import I had some classpath problems. Some I could fix, but I can't find the class com.sapportals.portal.prt.service.jco.IJCOClientService or any of the com.sapportals.portal.prt.service.jco.* classes. I used WinRAR to search the JAR-libraries.
Can somebody please tell me in which JAR-library and in which plugin-folder these JCO-classes can be found in NWDS 2.0.9. Thanks in advance.
Best regards,
EricHi Eric
Try this
<drive>:\usr\sap\<instance>\<serverprocess>\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.portal.runtime.application.jcoclient\lib\jcoclientapi.jar
Regards
Pran -
NWDS 7.0 Error during Quick PAR Upload and while trying Exporting PAR-File
Hello,
I am trying to use the functions "Export as PAR-File" and "Quick PAR Upload" in NWDS 7.0.
Unfortunately I got an error every time when I am trying to use this functions. I am using the package explorer in the Java perspectiv in NWDS for starting this functions. The error tells me the following:
"Unable to connect to the Portal"
"Operation failed: Please make sure the server "XY" is running or check the log (sap-plugin.log) for more detail"
Thats all.
When I am looking in the log-file I can read the following messages:
"ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore: view-actions: GET_VIEW:ALL]"
"ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore: view-actions: IS_VIEW_EXISTS:ALL]"
"ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore: view-actions: SIZE_OF_VIEW:ALL]"
"ACCESS.ERROR: Authorization check for caller assignment to J2EE resource [keystore-view.TicketKeystore: view-actions: READ_ENTRY:ALL]"
LOGIN.ERROR|null|| Login Method=[default] UserID=[user_Admin] IP Address=[192.168.xxx] Reason=[Cannot authenticate the user]
I have tried this with several users and their passwords. All of the users have admin-rights at least in the portal. One of them even in the SDM.
I can sucessfully deploy webdynpros from NWDS into the same Portal with this users.
We are using SAP Logon Tickets and SSO is configured working fine between Portal and backend.
We have imported Key Store File in NWDS unter Window --> Preferences --> Java Development Infrastructure.
And we are not using the NWDI.
Who knows why I cannot even export par-files? Are their any configurations missing?
Best regards,
IrisIt is mentioning about authentication.
check whether you have access to deploy directly or not ? maybe direct deployment into portal disabled .
I think you have to follow the procedure of checkout and activate procedure.
Can you clarify few things
1) Are you using NWDI Based Transports in your landscape?
Login Method=default UserID=user_Admin IP Address=http://192.168.xxx Reason=Cannot authenticate the user
http://192.168.xxx is it your development portal?
Did you clarify with admin people whether direct deployment disabled?
Koti Redd
Maybe you are looking for
-
Just brought a new ipod touch 5th gen, and when i connect it with my cable on my windows 8 hp laptop it will recognise it on my laptop in my computer but it won't connect with itunes. I have the latest version of itunes, and have tried reinstalling i
-
How Do I Create A New @me or @icloud account
How do I create a new @me or @icloud.com account. There is no edit button on the main email account when I go to the change feature.
-
Switch from Comcast back to AT&T - Now Fax is not working on my HP Officejet J5700 All-in-one
To HP Support: My home phone was with Comcast. My fax was working fine. I have since switched my home phone to AT&T and now my fax is not working. Question - what do I need to do to get my fax to work like it did previously? Please advise and thank
-
Display Images stored on filesystem
Hello, I have stored photos (JPEG images) in my OS filesystem and trying to create album to view them using BFILE datatype and stored procedure. I would like to diaply one photo on each page withlinks to next and previous photos. I was able to make t
-
Whirring, clicking, and sad ipod icon?
I have a three year old 4G 40GB iPod which has been giving me problems recently. When it starts up I get the Apple logo followed by a whirring and clicking sound (sounds like the drive trying to start up), and eventually the sad ipod icon appears. Wh