NWDS debug mode can only be supported by one client ?

Hi all.
We are 4 persons who are developing webdynpro application together.
However, when we are using NWDS debug mode, we found that only one client debug is supported, when the second person want to debug, the first person have to exit debug mode.
Can WAS support for more debug mode ?

Hi Jianhong,
Right now you have only one instance of your server,so only one debug port is available.Hence only one person at a time can debug.
If you need to debug in development environment with more people then you have to create as many instance of server as you need.
Recently i have seen some forum/webblog here about it.

Similar Messages

  • PowerView Errors in the metadata manager. The current model can only be expressed when the client is requesting tabular view metadata with VERSION restriction of 2.0 or later

    SQL 2012 SP 1 CU4 applied. Now getting " Errors in the metadata manager. The current model can only be expressed when the client is requesting tabular view metadata with VERSION restriction of 2.0 or later"
    Any ideas what could be causing it to send the incorrect version?

    amaltsev1,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Email--I can only get emails from one account

    I Can only get emails from one account on my iPad and iPhone 5
    i used to be able to access both email accounts prior to getting a new battery for the iphone

    Hi LinneaH,
    If you are having issues with getting emails on your iPhone or iPad, then take a look at the article below to give you some troubleshooting options to get it working again. Make sure that the settings and passwords are correct for your email and if you still have issues, then you may want to remove the email account from your device and then add it back in. 
    Get help with Mail on iPhone, iPad, and iPod touch
    https://support.apple.com/en-us/TS3899
    Take it easy,
    -Norm G. 

  • HT1415 You can move the rental between devices as many times as you wish during the rental period. However, the movie can only be played on one device at a time. If you rent a movie on an iPhone, iPad, iPod touch, or Apple TV, it is not transferable to an

    You can move the rental between devices as many times as you wish during the rental period. However, the movie can only be played on one device at a time. If you rent a movie on an iPhone, iPad, iPod touch, or Apple TV, it is not transferable to any other device and you must watch it on that device.
    This is a confusing statement. Can really move the rental between devices or not???  

    If you originally downloaded it to a computer, yes. If you originally downloaded it to an iOS device, probably not; if you want to try anyway, use the Transfer Purchases function in iTunes.
    (85739)

  • GroupLayout can only be used with one Container at a time

    Dear all,
    I am a beginner so please don't throw rocks at me...
    I have created two frames with NetBeans. One is the main frame (extends from JPanel) and the other frame I put it to be started when pressing a button from the main frame (the second frame extends from JFrame). Both frames are created using the designer in NetBeans, so the code for creating the GUI is automatically generated by NetBeans, so both frames use the same layout (GroupLayout).
    Here is the code of the button from the main frame to start the second one:
    private void manageCustomersActionPerformed(java.awt.event.ActionEvent evt) {                                                
            // TODO add your handling code here:
            CustomerGUI custGUI1=new CustomerGUI();//CustomerGUI is the second frame
            custGUI1.setVisible(true);
    }When I press this button from the main frame I get this runtime exception: Exception in thread "AWT-EventQueue-0" java.lang.IllegalArgumentException: GroupLayout can only be used with one Container at a time. The second frame is not opened.
    How should I handle this?
    What I want to do: I want to have a main frame, from which I can start additional ones (the main frame must be always opened, while the additional ones can be closed after performing certain actions). I read a little about internal frames and I think this can be a solution, but I must edit the existing design...
    Thank you
    With respect,
    Don
    Edited by: don1983p on Dec 16, 2008 2:21 AM

    AndrewThompson64 wrote:
    There are those that maintain that JFrame should never be extended. I am not convinced, but most cases where a JFrame is extended would be better coded as simply configuring the JFrame within the main(). GUI builders such as found in NetBeans seem to extend JFrame as a matter of course.I too am not rigorous or religious about this either, but try to adhere to this as a matter of practicality and convenience, I find that if I don't extend a JComponent but rather use composition rather than inheritance, it's much easier to use objects of my class when programming in Eclipse. For instance in Eclipse (and in most IDEs), if I type my object name and then a period, it will show all of the method's available for me to use on this object. If I subclass JPanel or JFrame, I'll see a gazillion methods most I don't want to see, and thus most are clutter. On the other hand if I use composition, I'll only see a small number of methods and these will be only the methods that I want to see and need to use.

  • HT1848 I am trying to transfer my purchases from my iPhone 5 to my new Mac computer.  I get the message stating that it can only be synced with one computer at a time.  I have tried the 2 other ways and I get no options to transfer my purchases.  Help?

    I am trying to transfer my purchases from my iPhone 5 to my new Mac computer.  I get the message stating that it can only be synced with one computer at a time.  I have tried the 2 other ways and I get no options to transfer my purchases.  Help?

    If you see Devices in the big list on the left-hand side of iTunes, it should show the name of your iPhone right below it. You can right-click (or hold ctrl and left click) on the name of the iPhone there, and choose "transfer purchases from iPhone".
    If you're on iTunes 11, you won't see the big list of the left until you go to the View menu at the very top (where you see iTunes/File/Edit/View/etc) and choose Show Sidebar. Then do the same thing: right-click or ctrl and left-click on the iPhone's name below Devices and "transfer purchases from iPhone".
    It'll ask you to authorize the computer for your Apple ID if you haven't yet; to do that, you just type your Apple ID and password in when it asks. If it says you are not authorized but doesn't automatically give you an option to do so, then you can go to the Store menu at the very top and choose "authorize this computer".

  • My laptop hard drive crashed - when I go to sync my iPhone it says that my phone is already synced with another computer and can only be synced with one computer at a time.

    My Dell laptop hard drive crashed - when I go to sync my iPhone it says that my phone is already synced with another computer and can only be synced with one computer at a time. When I hit sync is says it will erase my phone and sync with the new computer which is blank. How do I get my phone to sync my contacts, pics, apps etc. over to my new hard drive without losing anything.

    Yes, so what's confusing... Did you not restore the backup of your data, contacts, pics, apps, music, etc. to the new hard drive after you replaced it or reformatted it or whatever you did? If so, then you can just sync your data back.
    If not, please try searching the forum. This has been addressed hundreds of times here.

  • Accounts can only be part of one Family at a time.

    I just upgraded my Mac Book Pro to Yosemite and get the following error when trying to start up Family Sharing
    {my appleID} "is used for sharing purchases in another Family. Accounts can only be part of one Family at a time."  I'm not sure what that means or how to fix it.  I'm only part of one family!  I get the same error message trying to start up Family Sharing on my iPhone and iPad.

    Hello Bill,
    Did you find a way to resolve this problem?
    I have the same issue...

  • I have an ipad version 5.1.1. i have multiple albums in the ipad and i want to transfer some photos to my computer but when i open the ipad files via "computer" i can only see picture from one of the albums.what should i do?

    i have an ipad version 5.1.1. i have multiple albums in the ipad and i want to transfer some photos to my computer but when i open the ipad files via "computer" i can only see pictures from one of the albums.what should i do?

    You can only import photos from the camera roll into the computer. Is that the album that you are seeing?
    Any albums that you create on the device itself (the iPad that is) cannot be transferred to your computer. iPad created albums do not contain copies of your photos but merely pointers to those photos so they do not actually exist in those albums.

  • Messages in multi-message format can only be sent to one Adapter Engine

    Hi,
    Using XI 7.0 SPS 12 I have a scenario Single Flat File->XI->Multiple Messages to ECC.
    Due to an annoying limitation/bug in ECC we have to send workorders in to be processed as individual transactions.  This means generating seperate calls to ECC from PI.
    I've adjusted my message map (No BPM) to split the source messages out, but when it calls the XI adapter to send them to ECC I get the following:
    <!-- Technical Routing -->
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
    xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
    SOAP:mustUnderstand="">
         <SAP:Category>XIServer</SAP:Category>
         <SAP:Code area="OUTBINDING">CO_TXT_MMF_ENGINETYPE</SAP:Code>
         <SAP:P1/>
         <SAP:P2/>
         <SAP:P3/>
         <SAP:P4/>
         <SAP:AdditionalText/>
         <SAP:ApplicationFaultMessage namespace=""/>
         <SAP:Stack>
         Messages in multi-message format can only be sent to one Adapter Engine
         </SAP:Stack>
         <SAP:Retry>M</SAP:Retry>
    </SAP:Error>
    I am generating multiple structures under
    messages/message1/xx_my_structure_repeated_at_this_level
    which gives the correct amount of payloads in moni.
    I believe this error is because the http/idoc adapters dont go through the AE and it is the AE that splits the multiple messages into individual calls.  Is there a clean workaround which doesnt involve BPM or intermediate writing to disk etc?
    Thanks
    James.
    Points awarded where appropriate.

    <i>I believe this error is because the http/idoc adapters dont go through the AE and it is the AE that splits the multiple messages into individual calls.</i>
    Perfectly correct
    <i>Is there a clean workaround which doesnt involve BPM or intermediate writing to disk etc?</i>
    May be writin a module.
    Otherwise to avoid other development time, go for BPM.
    Regards,
    Prateek

  • How do I set up a rating scale so that respondents can only select each option one time?

    How do I set up a rating scale so that respondents can only select each option one time?

    hi there,
    in the LV VI, function & how-to help open the item
    Building the front panel -> Front panels controls and indicators -> Array & Cluster controls and indicators -> Arrays -> Tabbing through Elements of an Array or Cluster
    or see attachment
    Best regards
    chris
    CL(A)Dly bending G-Force with LabVIEW
    famous last words: "oh my god, it is full of stars!"
    Attachments:
    TabbingThroughArrays_Help.jpg ‏96 KB

  • TS2755 can only send pictures to one contact, all others the camera icon is not lit up

    I can only message photos to one contact, all others the camera icon is not able to be used. Thanks for the help.

    Thank you but that didn't seem to work....any other ideas?

  • I can only hear sound from one side of the head phone

    I've plug in my bass guitar through a cord and a converter in the line in port on my PC. Then checked 'listen to this device' (head phone) which is connected properly as it worked perfectly when I play any sound in ma PC. But when I play my guitar, I can
    only hear it from one side of the head phone. How to fix it!?

    Is that compatible to give output from both sides (R + L) ? Can you check same thing on other system ? 
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Dimension PWXTY64 can only be manually activated in client 001

    Hi ,
    I am trying to transport some of my infoubes from Dev to Quality  where I can see th error
    Dimension PWXTY64 can only be manually activated in client 001
    Message no. R7048
    Diagnosis
    Dimension PWXTY64 does not have a number range interval. A new interval has to be generated so that IDs can be assigned. As IDs already exist, the interval has to be created during object activation. This is only possible in BI client 001 as the interval is client-dependent.
    The error occurred in client 000 - probably in after-import handling.
    System Response
    Dimension PWXTY64 can only be activated manually in client 001.
    Procedure
    Activate Dimension PWXTY64 manually in client 001.
    Please let me know what needs to be done to avoid this error
    Thanks ,
    Sany

    Have you found a solution to this issue?  We experienced the same thing this weekend, and we had to manually activate the Infocubes using the activation program.  But, if there is a way to avoid this in the future, that would be great.
    Thanks,
    John

  • HT1752 Hi, I want to play my music through my Comp as well as my wireless speaker.. i can only seem to get one working at a time, is it possible to get both working at the same time??  Thanks Kylie

    Hi, I want to play my music through my Comp as well as my wireless speaker.. i can only seem to get one working at a time, is it possible to get both working at the same time??  Thanks Kylie

    Hi Kylie,
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

Maybe you are looking for