NWDS HAngs while creting the model

When I try to create webservice model in a webDynpro Devel pment Component NWDS hangs while trying to put files into DTR.
The NWDS put the model files into DTR in two sets, the first set goes through smoothly, but when the second set is added NWDS hangs. The situation is same across all the NWDS installation
My patch level is SP16.
Has anybody come across such scenario?
Regards,
Ameya

Similar Messages

Getting the following error while creating the model for webdynpro app.

Plugin Name: Web Dynpro Model Editor Services
Plugin ID : com.sap.ide.webdynpro.service.modeleditor
Class :ap.ide.webdynpro.modeleditor.wizards.model. creation.ModelDialog
Method : nextPressed
Exception : org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NoClassDefFoundError)
This is the error i am getting while creating the model for the webdynpro application. Can some one help ?
Thanks & Regards
Lalith

hi
This error occurs mainly due to the reason that particular plugin is not there in the NWDS.
So please try to reinstall the NWDS or try tracing out whether that particular plugin is there or not.
Thank,
kris

OMWB 1.4.1 hangs while creating Oracle Model

Hi,
I'm migrating Sybase11 to Oracle 8.1.7 using OMWB 1.4.1.I'm
able to create the Sybase model but the tool hangs while
creating the Oralce model while mapping check constraints.
What could be the possible reason??
Reply ASAP pls!
TIA
Bharath

Hi,
Have you tried OMWB 2.0.2?
Regards
John

Problem while publishing the models - it is taking much time

Hi,
I am facing one issue while publishing the models.Previously when Re-publishing the models in Configurator processing pending publications usually took 3 to 5 minutes per model. Currently it is taking 15-20 minutes per model to process. Please suggest me the possiblities to identify the root cause of the issue.
Thanks in advance.
Regards,
Purushoth

You'll probably want to gather a trace for the Process a Single Publication concurrent request. You can turn this on by selecting ' enable trace' on the program definition. You'll need your dba to review the trace to identify which parts of the program are taking the longest.
If you haven't run CZ Purge for awhile, try running it. Also find out how often stats are gathered for the CZ schema.
Thanks,
Jason

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

An error occurred while loading the model for the item or data source 'EntityDataSource'.

Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances.
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan Kumar

I'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error: "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server. The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1. Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running. It should be version 11.0.3000 or greater. If it's not, you have the wrong "SP1" installed. The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed. You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases. Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!

HT4623 The "Software Update" feature is not available in my Ipod 2nd Generation unit while the upgrade option in iTunes keeps on hanging while downloading the upgrade iOS (time out error). So, please tell me how I can upgrade the iOS.

The "Software Update" feature is not available in my Ipod 2nd Generation unit while the upgrade option in iTunes keeps on hanging while downloading the upgrade iOS (time out error). So, please tell me how I can upgrade the iOS.

The Settings>General>Software Update comes with iOS 5. The 2G can only go to iOS 4.2.1
Try disabling the computer's security software during the download and update.

Blackberry 9320 gets hang while receiving the call

Hello Team,
I have took th Blackberry just 4 days back and i am facing a problem already and it was my dream to buy the blackberry but after buying just after 4 days my cell hangs while recieving the call, only trackpad works and i cannot unlock the phone as well and i have to remove battery and restart the phone to make it work please suggest me what has to be done to make my phone to work properly do i have to take it servise centre or any suggestion which i can do to solvethis issue.... Blackberry is my dream phone and this bug has dissapointed me a lot just after 4 days after purchasing i am facing the issue.. Please help me....
Thank you,
Lohith

Hey lohithkavali,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
I would suggest reloading the software and then test the issue prior to restoring any data. Follow the steps in this KB article: www.blackberry.com/btsc/KB11320
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Adpatch hangs while compiling the PLL's in 11i

Hi All,
My Adpatch session hangs at the stage while compiling PLL's without any error in adpatch log,worker log and alert log.
the worker state shows in running state and will not change the state then after.
We will all the f60gen process keep running at the backend without completion.
When we manually compile and issue the same f60gen command it works.
Please some one help on the issue.Support is nothing to help on this.
Thx,
Raghu

Pl do not post duplicates - adpatch hangs while compiling the PLL's in 11i

Reg: Error while deploying the Model

Hello All,
I developed a Model in the VC.
The compilation of the model was successful.
But when I tried to deploy the model I'm getting an Error message saying :
"Error in executing a process for Flex compilation, Not enough space" .
Can anyone tell me what to do to resolve this problem ?
Regards,
Deepu.K

Hi colleagues,
We also encountered this problem here at our customer´s system .
We told the basis administrators to increase the disk space which did not solve our problem, though.
After successfully compiling the vc model
Deploying with FLEX2 results in an error as follows:
"Process is not executed!"
while deploying with flex1 resulits in the error
"Error in executing a process for Flex compilation, Not enough space"
Since everything has been working smoothly for the last months until now,
we wonder how this error has suddenly occured.
Does anyone have an idea how to trace the error or has anyone encountered this error, too?
Thanks in advance!
Gideon

Java.exe Error while creating the Model in Webdynpro

Hi,
I am creating the Model in Webdynpro Project. I have given the SAP r3 user id Passord details. after giving these details and clicking on next, it is giving an Error as " *Javaw.exe has got some problem needs to close. sorry for the inconvenence*". NWDS is getting closed if I click on Ok in the Pop-up window message.
I did re install the NWDS as well. but still the problem is persisting. and not able to proceed further.appreciate the quick resolution .
Rajyalakshmi
09739066796

hi
This error occurs mainly due to the reason that particular plugin is not there in the NWDS.
So please try to reinstall the NWDS or try tracing out whether that particular plugin is there or not.
Thank,
kris

Prevent form/timer hanging while holding the minimize button

I got troubles when the customers holding the minimize button (without release) on my form, it make all forms and all timers/controls entirely hanging. And thus make some exception bugs for my application.
Steps to Reproduce Behavior:
In Form1, create a Timer1 & Label1 and paste this code :
Public Class Form1
Public a As Long
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Timer1.Enabled = True
Timer1.Interval = 1
End Sub
Private Sub Timer1_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Timer1.Tick
a = a + 1
Label1.Text = a
End Sub
End Class
Press F5 to run the application. You will see the number display on Label1 increase rapidly. Now try to hold the Minimize button and the timer will hang up, label1 stop increasing. Release the minimize button will make the timer resume increasing.
I want my timer and all controls in form still working while holding the minimize button. Is there any good resolution for my issue ?

various possible resolution. remove controlbox. remove text. draw text if wanted. draw controls. use system.timers.timer. system menu removed so no menu for move size minimize maximize close available.
https://msdn.microsoft.com/en-us/library/system.timers.timer(v=vs.110).aspx?cs-save-lang=1&cs-lang=vb#code-snippet-1
form transparent background in image. movement or buttons not affect timer may affect display speed.
Option Strict On
Imports System.Timers
Public Class Form1
' Code from this link - http://www.dreamincode.net/forums/topic/275178-drawing-icon-on-form-border/
WithEvents Timer1 As New System.Timers.Timer
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Me.FormBorderStyle = Windows.Forms.FormBorderStyle.Sizable
Me.ControlBox = False
Me.Text = ""
Me.Location = New Point(CInt((Screen.PrimaryScreen.WorkingArea.Width / 2) - (Me.Width / 2)), CInt((Screen.PrimaryScreen.WorkingArea.Height / 2) - (Me.Height / 2)))
Timer1.Interval = 10
AddHandler Timer1.Elapsed, AddressOf Timer1_Elapsed
End Sub
Private Sub Form1_FormClosing(sender As Object, e As FormClosingEventArgs) Handles Me.FormClosing
Timer1.Enabled = False
End Sub
'A form with custom border and title bar.
'Some functions, such as resize the window via mouse, are not implemented yet.
'The color and the width of the border.
Private borderColor As Color = Color.GreenYellow
Private borderWidth As Integer = 3
'The color and region of the header.
Private headerColor As Color = Color.GreenYellow
Private headerRect As Rectangle
'The region of the client.
Private clientRect As Rectangle
'The region of the title text.
Private titleRect As Rectangle
'The region of the minimum button.
Private miniBoxRect As Rectangle
'The region of the maximum button.
Private maxBoxRect As Rectangle
'The region of the close button.
Private closeBoxRect As Rectangle
'The states of the three header buttons.
Private miniState As ButtonState
Private maxState As ButtonState
Private closeState As ButtonState
'Store the mouse down point to handle moving the form.
Private x As Integer = 0
Private y As Integer = 0
'The height of the header.
Const HEADER_HEIGHT As Integer = 25
'The size of the header buttons.
ReadOnly BUTTON_BOX_SIZE As Size = New Size(15, 15)
Dim Test As Boolean = False
Private Sub CustomBorderColorForm_Paint(ByVal sender As System.Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles MyBase.Paint
'Draw the header.
Using b As Brush = New SolidBrush(Color.FromArgb(10, Color.White))
e.Graphics.FillRectangle(b, headerRect)
End Using
'Draw the title text
If Test = False Then
Using b As Brush = New SolidBrush(Me.ForeColor)
e.Graphics.DrawString("Anything you want Baby", Me.Font, b, titleRect)
End Using
ElseIf Test = True Then
Using b As Brush = New SolidBrush(Me.ForeColor)
e.Graphics.DrawString("Hello Dolly", Me.Font, b, titleRect)
End Using
End If
'Draw the header buttons.
If Me.MinimizeBox Then
ControlPaint.DrawCaptionButton(e.Graphics, miniBoxRect, CaptionButton.Minimize, miniState)
End If
If Me.MinimizeBox Then
ControlPaint.DrawCaptionButton(e.Graphics, maxBoxRect, CaptionButton.Maximize, maxState)
End If
If Me.MinimizeBox Then
ControlPaint.DrawCaptionButton(e.Graphics, closeBoxRect, CaptionButton.Close, closeState)
End If
'Draw the border.
ControlPaint.DrawBorder(e.Graphics, clientRect, borderColor, _
borderWidth, ButtonBorderStyle.Solid, borderColor, borderWidth, ButtonBorderStyle.Solid, borderColor, borderWidth, ButtonBorderStyle.Solid, borderColor, borderWidth, ButtonBorderStyle.Solid)
End Sub
'Handle resize to adjust the region ot border, header and so on.
Private Sub CustomBorderColorForm_Resize(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Resize
headerRect = New Rectangle(Me.ClientRectangle.Location, New Size(Me.ClientRectangle.Width, HEADER_HEIGHT))
clientRect = New Rectangle(New Point(Me.ClientRectangle.Location.X, Me.ClientRectangle.Y + HEADER_HEIGHT), _
CType(New Point(Me.ClientRectangle.Width, Me.ClientRectangle.Height - HEADER_HEIGHT), Drawing.Size))
Dim yOffset = (headerRect.Height + borderWidth - BUTTON_BOX_SIZE.Height) / 2
titleRect = New Rectangle(CInt(yOffset), CInt(yOffset), _
CInt(Me.ClientRectangle.Width - 3 * (BUTTON_BOX_SIZE.Width + 1) - yOffset), _
BUTTON_BOX_SIZE.Height)
miniBoxRect = New Rectangle(Me.ClientRectangle.Width - 3 * (BUTTON_BOX_SIZE.Width + 1), _
CInt(yOffset), BUTTON_BOX_SIZE.Width, BUTTON_BOX_SIZE.Height)
maxBoxRect = New Rectangle(Me.ClientRectangle.Width - 2 * (BUTTON_BOX_SIZE.Width + 1), _
CInt(yOffset), BUTTON_BOX_SIZE.Width, BUTTON_BOX_SIZE.Height)
closeBoxRect = New Rectangle(Me.ClientRectangle.Width - 1 * (BUTTON_BOX_SIZE.Width + 1), _
CInt(yOffset), BUTTON_BOX_SIZE.Width, BUTTON_BOX_SIZE.Height)
Me.Invalidate()
End Sub
Private Sub CustomBorderColorForm_MouseDown(ByVal sender As System.Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles MyBase.MouseDown
'Start to move the form.
If (titleRect.Contains(e.Location)) Then
x = e.X
y = e.Y
End If
'Check and press the header buttons.
Dim mousePos As Point = Me.PointToClient(Control.MousePosition)
If (miniBoxRect.Contains(mousePos)) Then
miniState = ButtonState.Pushed
ElseIf (maxBoxRect.Contains(mousePos)) Then
maxState = ButtonState.Pushed
ElseIf (closeBoxRect.Contains(mousePos)) Then
closeState = ButtonState.Pushed
End If
End Sub
Private Sub CustomBorderColorForm_MouseMove(ByVal sender As System.Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles MyBase.MouseMove
'Move and refresh.
If (x <> 0 And y <> 0) Then
Me.Location = New Point(Me.Left + e.X - x, Me.Top + e.Y - y)
Me.Refresh()
End If
End Sub
Private Sub CustomBorderColorForm_MouseUp(ByVal sender As System.Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles MyBase.MouseUp
'Reset the mouse point.
x = 0
y = 0
'Check the button states and modify the window state.
If miniState = ButtonState.Pushed Then
Me.WindowState = FormWindowState.Minimized
miniState = ButtonState.Normal
ElseIf maxState = ButtonState.Pushed Then
If Me.WindowState = FormWindowState.Normal Then
Me.WindowState = FormWindowState.Maximized
maxState = ButtonState.Checked
Else
Me.WindowState = FormWindowState.Normal
maxState = ButtonState.Normal
End If
ElseIf closeState = ButtonState.Pushed Then
Me.Close()
End If
End Sub
'Handle this event to maxmize/normalize the form via double clicking the title bar.
Private Sub CustomBorderColorForm_MouseDoubleClick(ByVal sender As System.Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles MyBase.MouseDoubleClick
If (titleRect.Contains(e.Location)) Then
If Me.WindowState = FormWindowState.Normal Then
Me.WindowState = FormWindowState.Maximized
maxState = ButtonState.Checked
Else
Me.WindowState = FormWindowState.Normal
maxState = ButtonState.Normal
End If
End If
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
If Test = False Then
Test = True
Me.Invalidate()
Else
Test = False
Me.Invalidate()
End If
End Sub
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
If Timer1.Enabled = False Then
Timer1.Enabled = True
Else
Timer1.Enabled = False
End If
End Sub
Private Sub Timer1_Elapsed(sender As Object, e As ElapsedEventArgs)
Invoke(New Timer1sDelegate(AddressOf Timer1sSub))
End Sub
Private Delegate Sub Timer1sDelegate()
Private Sub Timer1sSub()
Label1.Text = Now.Ticks.ToString
End Sub
End Class
La vida loca

Choosing Server type while creating the model..

Hi,
While creating a model, we have to give system details and logon details. In that we will select the server type as either "Single Server" or "Load Balancing Server".
Kindly tell me the difference between these 2 types.
Thanks & Regards,
Kalai

Hi,
If you have multiple instances and the load is being shared on them then you need to select Load Balancing server but if its a decicated server then you opt for Single Server.
Regards,
Murtuza

Error while binding the model with the custom controller

Hi All,
I first started with a dummy project and in that binded the model with the custom controller.
For some reason, I deleted the project and created a new one. I have deleted the whole project from the workspace.
Now, when I am trying to bind the model again , I am getting an error when selecting the response parameters saying that DUPICATE ENTRIES.Ideally it should not happen when I am deleting it completely.
I am using a Webservice Model. Can any one help me out to resolve the same.
Looking forward for your response.
Regards
Dipendra

Hi Raman,
I did that and even I have Installed the IDE again.
Still I have that error.
Regards
Dipendra

Reg. Scenerio Sheets are not importing while importing the model.

Hi All ,
Due to some issues , I exported the existing model and then do the isreset before importing the model. I imported the model which i exported. I am unable to see any Scenerio Sheet , planning Sheet in Analysis Workbench which i created earlier. there is no data in Planning workbench .
Do i need to create new Scenerio sheets ? or Is there anyway i can retrive those sheets and Put it back ?
if yes then how, Please guide.
Thanks
Lokesh Rathi

Hi ,
Sorry for late reply .
The version we r using IOP 4.0.1.32 .
Please let me know your thoughts on following issue :
1) we have already published a model which is having 5 Cubes ,11 dimensions and 100+ measures. Then we add two more cubes which are not related the previous one and we used different Dimension and measures for it. These cubes remain in unpublished state and somehow one of the cube from Earlier published model also came into unpublished state. Why the scenerio sheets which are already created not visible to me after importing this model (Unpublished) to the other instance. I can understand tht untill the model is processed it will not open but it was not visible also in the planner workbench. the planner workbench is completely empty.
lokesh

NWDS HAngs while creting the model

Similar Messages

Maybe you are looking for