NWDS import RFC interface for the structure issue??

Hi Gurus,
I'm working on the SAP NetWeaver BPM with NWDS 7.3 SP12 rite now and got confused about the RFC interface structure stuff.
I have a mapping activity defined in the process and the receiver interface needs a RFC. So I go to "Process Modeling" -> "Services Interfaces", right click and choose "Import RFC",type the correct RFC/BAPI name connecting with the SAP ECC system. The issue is that when I finished importing the RFC, went to the "Data Types", the RFC interface namespace shows out but the structure shows seperately with individual segment, so the whole nested RFC interface structure messed up in parallel which is incorrect for the data object and output mapping for later process activities.
Anyone has ran into such kind of issue or experience the same, any solution or suggestion?
Thanks in advance,
Rajesh

William,
Another two questions relates to NWDS BPM development:
1. Sometimes after I import the service interface into NWDS, the structure displays differently from it defines in ESR, I mean the fields sequence. I dont know why
2. Refer to your screenshot,
Assume the occurence of node HEADER and item is (0..1), when I want to map a blank constant to them to generate the target structure, the editor not allows and display error which is very different with ESR mapping tool, could you please help to advise? Tons of thanks!
Thanks a lot in advance,
Rajesh

Similar Messages

  • User interface for the CAF project

    hi
                 to make  user interface for the CAF  i  have  written  a simple 
      webservice application for storing the data in the database using JDBC operation
       i have  imported the webservice in the  EXTERNAL SERVICE  and  mapped
      in the required in the entity service  , every thing worked fine  but  when  i have
      imported the model  for developing the USER INTERFACE  for the  webservice
       there is no  EXECUTABLE NODE 
          can  anyone provide a clear idea  how i can proceed further .

    Couple of things - you can open the interface for any instrument or plug-in by double-clicking its insert slot on the channel strip. You can configure Logic to automatically open the interface for a plug-in when you first instantiate it in the preferences. Go to Logic Pro > Preferences > Display > Mixer, and check the box for "Open plug-in window on insertion".

  • I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

    I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

    http://support.apple.com/kb/TS1591
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • I am creating a video using the green screen option- I imported a picture for the background of the project and videotaped someone using a green screen. Is it possible to move the video of the person around so it is not blocking the picture behind it?

    I am creating a video using the green screen option in iMovie.   I imported a picture for the background of the project and videotaped someone using a green screen. Is it possible to move the video of the person around so it is not blocking the picture behind it?

    To enable this right you need Acrobat, not the free Reader.
    However, starting from Reader X it is possible to add simple markups to any file, unless it has been specifically disallowed by the creator of the file.

  • Inconsistency in the Dictionary for the structure "MC02M_0ITM".

    Hi Expert,
    we are applying ehp3 for ERP 6.0. I am getting the below abap dump DDIC_TYPE_INCONSISTENCY.
    Runtime Errors DDIC_TYPE_INCONSISTENCY
    Date and Time          29.08.2011 10:12:27
    Short text
         Inconsistency in the Dictionary for the structure "MC02M_0ITM".
    What happened?
         Error in the SAP kernel.
         The current ABAP "SAPLMCEX" program had to be terminated because the
         ABAP processor detected an internal system error.
    Error analysis
         There is an internal system error.
         eliminated with ABAP/4.
    How to correct the error
         The internal system error cannot be fixed by ABAP means only.
         You may be able to find a solution in the SAP note system. If you have
         access to the SAP note system, try searching for the following terms:
          "DDIC_TYPE_INCONSISTENCY" " "
          "SAPLMCEX" or "LMCEXTOP"
    I can see there is error on Table MC02M_0ITM:
    Table MC02M_0ITM could not be activated (E- Field ZZUNDTSORT in table MC02M_0ITM is specified twice. Please check )
    when I run the program RSDDCHECK in your system,  for check the structure "MC02M_0ITM".
    There is som error.
    Any Idea how can I solve this kind of error. Is it some repport for help this?
    Regards

    Hi Srikishan,
    Thanks for reply.
    There is just one field ZZUNDTSORT on talbe.
    When I try to check the table I get this log:
    Check table/structure MC02M_0ITM
               Check table MC02M_0ITM (REZ/29.08.11/11:14)
               Enhancement category 3 possible, but include or subty. not yet classified
               Field ZZAFHENTFORM in table MC02M_0ITM is specified twice. Please check
               Field ZZAFHKVANTUM in table MC02M_0ITM is specified twice. Please check
               Field ZZAFHTERMFRA in table MC02M_0ITM is specified twice. Please check
               Field ZZAFHTERMTIL in table MC02M_0ITM is specified twice. Please check
               Field ZZAFREGNDATO in table MC02M_0ITM is specified twice. Please check
               Field ZZAFREGNKVAMTUM in table MC02M_0ITM is specified twice. Please check
               Field ZZAFREGNMEINS in table MC02M_0ITM is specified twice. Please check
               Field ZZALTMATNR in table MC02M_0ITM is specified twice. Please check
               Field ZZALTMPRIS in table MC02M_0ITM is specified twice. Please check
               Field ZZANSOEGNR in table MC02M_0ITM is specified twice. Please check
               Field ZZANTHA in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_DUMMY1 in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_DUMMY2 in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_GRKERN in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_KNKERN in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_MELDR in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_OLIEIND in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_RENS in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_RENTFRO in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_RENTIL in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_TOR in table MC02M_0ITM is specified twice. Please check
               Field ZZBK_TORTIL in table MC02M_0ITM is specified twice. Please check
               Field ZZBPROT in table MC02M_0ITM is specified twice. Please check
               Field ZZBUREN in table MC02M_0ITM is specified twice. Please check
               Field ZZBVAND in table MC02M_0ITM is specified twice. Please check
               Field ZZFORBELNR in table MC02M_0ITM is specified twice. Please check
               Field ZZFORFALDSDATO in table MC02M_0ITM is specified twice. Please check
               Field ZZFORVUDB in table MC02M_0ITM is specified twice. Please check
               Field ZZGJAHR in table MC02M_0ITM is specified twice. Please check
               Field ZZKONCEPTNR in table MC02M_0ITM is specified twice. Please check
               Field ZZLAESSELV in table MC02M_0ITM is specified twice. Please check
               Field ZZLAGERLEJDATO in table MC02M_0ITM is specified twice. Please check
               Field ZZLAGERLEJSATS in table MC02M_0ITM is specified twice. Please check
               Field ZZLAGERSATSDATO in table MC02M_0ITM is specified twice. Please check
               Field ZZLAGERSATSDATO2 in table MC02M_0ITM is specified twice. Please check
               Field ZZLAGERSATSDATO3 in table MC02M_0ITM is specified twice. Please check
    Regards

  • Inconsistency in the Dictionary for the structure "VXO2APPL"

    Hi gurus,
    I started with SP stack upgrade to 10(Install  SAP EHP1 for SAP NetWeaver 7.0  Stack 10 with Kernel 7.20).
    --First i did kernel upgrade from 701 patch 111 to 720 patch 105 which was successfull.
    --Now when i tried to upgrade the stack it gives me below error:
    Runtime Errors         DDIC_TYPE_INCONSISTENCY
    Date and Time          22.02.2012 14:16:39
    Short text
         Inconsistency in the Dictionary for the structure "VXO2APPL".
    What happened?
         Error in the SAP kernel.
         The current ABAP "SAPLSDOC" program had to be terminated because the
         ABAP processor detected an internal system error.
    Error analysis
         There is an internal system error.
         eliminated with ABAP/4.
    Trigger Location of Runtime Error
         Program                                 SAPLSDOC
         Include                                 LSVRXPIN
         Row                                     1.096
    **************************************************************************8
    I am able to login to the system in 000 client but when  i give any tcode i get this error....(i am only able to fire st22 and no other t code)
    Anyone who can help or has got the same problem earlier?
    Thanks
    Siddharth

    Hi Siddharth,
    Is Kernel upgrade to 720 really required for Support package stack upgrade ?
    because information clearly states "Error in the SAP kernel" rather i would suggest to upgrade your SAP system kernel to latest of 701 patch level 150
    Once you revert kernel to 701 , then try applying Support packages via client 000.
    Let us know results
    Regards,

  • No Component found for the structure

    Hi
    I am getting the following error when extracted the delta upload into BI
    No Component found for the structure for article 809875.
    The extractor is 2LIS_02_SCL.
    The following is the msg in the status bar.
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    I have replicated and activated the datasource. But still i am getting this error. How to fix it.
    Thanks
    Annie

    Hi Annie,
    Activate ur datasource in source system and replicate and also activate in BI system.This is a time stamp problem.After activated try to run ur infopackage again.It should be fine now.
    Regards
    Chandu

  • More than one outbound interface for the webservice scenario

    Hi Experts,
    Is it possible to have more than one outbound interface for the Webservice synchronous scenario? I have tried it , but I couldn't implement it.
    I would like to have your suggestions.
    Regards
    Sara

    Hey,
    Creation of a wsdl file
    /people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
    N:1 seemz he was refering to multimapping scenario.
    <b>Cheers,
    *RAJ*
    *REWARD POINTS IF FOUND USEFULL*</b>

  • Table name for the structure MEPO1211

    Hi Friends,
    I want to find out the the Purchase Orders created with USD currency.   This currency indicator is not available in the table EKPO.  On checking the PO, the currency field is in the strucure MEPO1211.
    Kindly let me know the table name where the PO with currency is stored or the table name for the structure MEPO1211.
    Thanks in advance.
    Regards,
    Mark K

    Hello Mark
    If the fields belong to the PO header then EKKO is the table you should look for.
    In case of item related data the table is EKPO.
    In any case structure MEPO1211 just belongs to screen 1211 in the PO application.
    Further Reading:
    [Purchase order item - cl_po_header_handle_mm|https://wiki.sdn.sap.com/wiki/display/ABAP/Purchaseorderitem-cl_po_header_handle_mm]
    Regards
      Uwe

  • To bold the descriptions for the structure members in the BEX Query

    HI Experts,
    Could any one please advise on how to BOLD the descriptions of the structure members in the BEX query.
    Thanks in advance,
    Jeswanth

    Are you looking at making the same BOLD in the web display ..?
    To do this :
    Execute your query - go to display source for the page and you will see the structure members identified with a particular CSS class.
    Open the CSS file from the MIME repository and then identify the class that is used for the structure elements and then change th CSS to make it bold and then upload the changed CSS into MIME .
    Refresh the HTTP global cache from SMICM and then run your report again - you should be able to see the structure elements in BOLD.

  • How do I set up the port interface for the WAN side of my RVS4000 to 100T Full Duplex?

    How do I set up the port interface for the WAN side of my RVS4000? The ISP says I need to set it to 100T Full Duplex, but where would I do that? In the Router's administration GUI I can't find any options to make such settings for the WAN side.

    The setup of the folders in Finder is entirely up to you. Whatever suits your needs is what you should do. Lightroom will be fine no matter how you set it up.
    So I'm not really sure what your question is.

  • Do we require abstract interfaces for the procedure ?

    hi
    while going through the file to DB scenario by Mukeshlal Parida at:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b   , I had a doubt regardign as to why we need to create a abstract message interface for the procedure request and procedure response.Is it necessary to do so?mapping is already done b/w request and DB and DB-response to the final response.The ID part will call the stored procedure.Then where does the need to introduce 2 more abstract async message interface arise?
    please try to clear this doubt so that i may understand the logic behind it.

    Hi...
        Find the below link.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/soa-middleware/soa-management/process-integration/step%20by%20step%20procedure%20to%20implement%20soap%20to%20jdbc%20scenario.pdf
    In the above link it is showing Soap to JDBC Sceanrio which is synchronous. For JDBC, only simple table is used. Instead you can use the stored procedure.
    For how to use stored prcodeure follow the below link
    /people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
    Regards,
    Leela

  • "Result" row not appearing for the Structure record in Bex Designer.

    Hi
    In BI BEx Designer,
    under Rows-> click any Characteristic-> Display Tab-> Result Rows: "Always Display" Option controls Last Row named "Result" (yellow colored) after the actual data reports ends.
    But i am not finding this thing for the structure.
    Actually my this report is based on 'Structure-> 2 selections' under Rows; once i run this query i get data without yellow colored 'Result" row at the end of report. I wanted to maintain the symmetry with other reports.
    Could u pls let me know how to get Query last "Result" record if i use only structure under the rows.
    Thanks...

    I limit the selection to display in one page, i see the overrall result but i've a result to show up after a Characteristic (result row option 'Display with more than one single value'), it works fine in BEx but not in web.
    for the other query, yes i do KF in the report.
    thanks

  • HT204244 Is a MacBook Pro (non-retina from 2011) also updated for the Thunderbolt issue? Or Retina MacBooks only?

    Is a MacBook Pro (non-retina from 2011) also updated for the Thunderbolt issue? Or Retina MacBooks only?

    Go to Geekbench
    http://browser.primatelabs.com/mac-benchmarks
    and check out the relative values for the system you're currently using versus the one you're going to buy. My guess is a fullly spec'd MBP Retina will do the job, but you're undoubtedly better qualified than anyone on here to tell what kind of a machine you need.

  • Table for the structure RIHEQUI_LIST

    Hello,
       I want the table name for the structure RIHEQUI_LIST.I searched but i didn't get the table name. Please help me on this.
    Regards,
    Rajesh

    Hi , Please find some of the table names below , and you are very specific what you want from this structure.
    EQUI             Equipment master data
    EGERR            Device data: Info record for point of delivery - historical
    EGERS            IS-U Device Master Data
    EGTUR            Periodic Replacement List
    EIKE             Index for Removed Device
    EQBS             Serial Number Stock Segment
    EQKT             Equipment Short Texts
    EQST             Equipment to BOM Link
    EQUZ             Equipment time segment
    A270             Euqipment/Document Type
    A272             Equipment/Standard Dummy Customer/Document Type

Maybe you are looking for

  • Error while running DBMS_NETWORK_ACL_ADMIN

    Hi, I am completely new to APEX and trying out myself. While Apex 4.2.1 installation, and configuring Embedded PL/SQL Gateway. Topic: To grant connect privileges to any host for the APEX_040100 database user getting error while running DBMS_NETWORK_A

  • Design PDF form acrobat 10 pro

    Ok so I'm making a PDF form for my school to make it easier for teacher to make hand made report cards. I have an issue where I have a grid Which is a 4x3. Is their an easy wy to create a grid in the PDF form so that the user can write inside each bo

  • Block with a SQL

    Hi Gurus, I ahve a table named x. In that I have a column called feed_id. I need to construct a block which has the resultset as the below query. select * from x where feed_id=(select max(feed_id) from x where pk=x.pk group by pk); Can I use the Data

  • "Add to Audition" grayed out

    I have a multicam clip that I created and is edited by varioius angles in the timeline. However, there is a section of it I wan to possible replace with a re-do of that section. I have a seperate multicam clip ready to go and I want to use the auditi

  • SCXI 1520 for load measurement cable lengths of 500 meters

    HI , I ned to measure lod from a 1000 ohm full bridge circuit. The distance between the sensor & my SCXI 1520 is 500 meters. Please let me know how can I compensate for the lead resistances both in Excitation & while reading back the actual sensor va