NWDS installation issue - "Please wait... completing the install"

Hi all,
I got the same "Problem" each time I update my NWDS.
[Re: NWDS installation issue.|Re: NWDS installation issue.]
After the installation, when I start the NWDS I get always the message:
"Please wait... completing the install"
If I create a new Workspace this really solves the problem but I don't like to create every time a new workspace after an update and copy all my projects back to this new workspace.
Is there no other solution around? I think I'm not the only one who has this troubles, am I?
Regards,
Stefan

Hi all,
I solved this problem by myself. So for everyone who is interested in how to solve this problem:
Just delete the folder .config in
\workspace\.metadata\
During the next start of NWDS this folder will be created and everything will work as excpected!
Stefan

Similar Messages

NWDS pop up "Please wait... completing the install

Hello,
I've upgraded NWDS and now whenever I open it I get the eclipse screen saying "Please wait... completing the install" as if the installation hasn't completed although it has.
I tried reinstalling NWDS but it didn't help, I don't want to completely remove it from my PC and do new clean install. Any ideas...?
Roy

Thanks Bala, it worked.
Just don't forget to mention to export your NWDS configuration, luckily I did that...
Roy

Please wait for the group policy client - shutting down issues

Hi
I have issues with shutting down machines. When machine is connected to company's LAN everything works fine. However, if machine is connected to VPN - Juniper NC - 1 hour or more it always hangs when it is shutting down. When I shut down the machine
(verbose mode on), first stage is:
Please wait for the system Event Notification service.
This ends exactly
after 3 minutes. Next stage:
Please wait for the group policy client windows 7
...is never timed out (even after few hours). Machine never shuts down.
In Application logs there are always these 4 events when machine is unsuccessfully shutting down:
6005: The winlogon notification subscriber <Sens> is taking long time to handle the notification event (Logoff).
4627: The COM+ Event System timed out attempting to fire the Logoff method on event class {D5978650-5B9F-11D1-8DD2-00AA004ABD5E} for publisher and subscriber . The subscriber failed to respond within 180 seconds.
The display name of the subscription is "ISensLogon2". The HRESULT was 80010002.
6006: The winlogon notification subscriber <Sens> took 180 second(s) to handle the notification event (Logoff).
6005: The winlogon notification subscriber <GPClient> is taking long time to handle the notification event (Logoff).
Sens is timed out after 3 minutes while there is no 6006 event for GPClient and machine is stuck there for ages (Please wait for the group policy client
stage). I noticed in System logs that machine always hangs if there is this error
5783: The session setup to the Windows NT or Windows 2000 Domain Controller \\server for the domain X is not responsive. The current RPC call from Netlogon on \\machine to \\server has been cancelled.
I made a group policy log and below you can see part of GPSVC log when machine is unsuccessfully shutting down:
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Entering with event 0xe58
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Canceling pending calls
GPSVC(2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Cancelled pending calls
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
GPSVC(438.1a04) 21:31:24:327 Waiting for user group policy thread to terminate.
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Entering with event 0xe10
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Canceling pending calls
GPSVC(218.c88) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x525
GPSVC(2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Cancelled pending calls
GPSVC(2d4.9c8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Entering with event 0xdcc
GPSVC(218.1054) 21:31:24:327 CGPNotify::UnregisterNotification: Entering with event 0x20cc
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(2d4.9c8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: Entering with event 0xd90
GPSVC(218.1054) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(2d4.1cfc) 21:31:24:342 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
GPSVC(218.d48) 21:31:24:342 Client_CompleteNotificationCall: failed with 0x525
GPSVC(218.d48) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
GPSVC(218.1c04) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x525
GPSVC(218.1c04) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
GPSVC(218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
GPSVC(218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: Entering with event 0x2100
GPSVC(218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
GPSVC(218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: Entering with event 0x1264
GPSVC(218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
I tried with signing out from VPN before shutting down machine, I even switched off WiFi but machine still hung. If i tried to get GP results before shutting down machine it takes ages and it is stuck in "Getting the user name" stage.
Gpupdate /force never updates policy (It stops at Updating Policy...). I tired with installing different hotfixes which did not resolve the issue. I never have any
issues with logging in, no GP scripts are applied when user is logging off or on, no roaming profiles. The only issue is when machine needs to be shut down.
I excluded 1 machine from GP and left it on VPN for a few hours, several times. It always shuts down successfully. I applied GP back one by one and the one which is presumably causing an issue is Avecto which adds admin rights when VPN application
starts (event 100):
Process started with admin rights added to token.
Command Line: "C:\Users\User\AppData\Roaming\Juniper Networks\Setup Client\JuniperSetupClient.exe"
Process Id: 5540
Parent Process Id: 2252
Policy: EA-PrivilegeGuardSettings.UK Policy
Application Group: EA-PrivilegeGuardSettings.Applications Granted Admin Rights
Reason: <None>
File Name: c:\users\User\appdata\roaming\juniper networks\setup client\junipersetupclient.exe
Hash: 27D8463A913A802E555AEEF45717B122249AA993
Certificate: Juniper Networks, Inc.
Description: Juniper Setup Client
Application Type: exe
Product Name: Juniper Setup Client
Product Code: <None>
Upgrade Code: <None>
Product Version: 8.0.6.48695
I guess there is a DNS issues when machine is on VPN which leads that GP cannot be applied / updated. Not sure if or why Avecto would have an impact on this. When machine is trying to shut down it still somehow thinks it is connected to DC. What
I also noticed are several explorer crashes while machine is on VPN.
Does anyone have same issues? All machines are Dell with Juniper NC (VPN).
Thanks,

Hi,
According to event log, Winlogon process takes a long time to handle logoff event. That's to say winlogon process is waiting for response to logoff.
According to your description after, this problem is most probably caused by Avecto. You can try to disable or uninstall it temporarily for test.
To make further troubleshoot with this problem, you can try to use WPT (Windows Performance Tool) to make troubleshoot.
http://blogs.technet.com/b/askpfeplat/archive/2013/03/22/troubleshooting-windows-performance-issues-using-the-windows-performance-recorder.aspx
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Every app install results in the "waiting" mode on my home screen. How can I complete the install process?

Every attempted app installation results in the "waiting" mode icon on my home screen. How can I complete the install process? What am I missing?

Hi,
1) Forget downloading the application from the device, and instead download it through iTunes and sync to transfer the application to your iPhone / iPad.
2) Other way is: Go to Application Settings> Store and tap above the Apple ID to sign out. Restart your iPhone / iPad, go back to Settings> Store and sign. Tap the icon that was waiting to update the application.

I cannot complete an installation of ITunes. During the install, I receive the following error message: Error writing to file: C:\Program Files\Bonjour\dns_sd.jar.

I cannot complete an installation of ITunes. During the install, I receive the following error message:
Error writing to file: C:\Program Files\Bonjour\dns_sd.jar.

That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I tried to import 2 photos from an email. The photos are now on iPhoto, however, when I try to close iPhoto or turn off my computer, I get a notice that says, "Photos are being imported to the photo library. Please wait for the import to complete."

I tried to import 2 photos from an email to iphoto. The photos now appear in iphoto as the latest imports, However, when I try to close iphoto or log off of my computer, I get a message box that says, " Photos are being imported to the photo library. Please wait for the import to complete."
I can't get out of iphoto or log off of my computer, or turn the computer off. How do I stop the import or log out of iphoto???

Try Force-quit from the Apple-menu to close iPhoto.

NWDS installation issue.

Hello,
I have installed NWDS on my pc and I have a minor issue with it:
When you first run the NWDS after the installation, an eclipse window appears saying "Please wait... completing the install". The problem in my installation is that I see this window every time I open NWDS and because of that when I switch between perspectives for example I don't see the related perspective icon at the top left corner of the NWDS window.
I tried reinstalling NWDS but it didn't help.
Anyone has an idea how to force it finalising the install which will suppress this message on startup and I assume will also resolve these icons issues? Perhaps a registry tweak?
Roy

Hi Roy,
can you try to start the NWDS with a new emtpy workspace? This error could be because of problems with the .metadata folder.
Hope this helps,
Holger.

Error "Please wait while the application opens: BlackBerryLink.exe - Application Error"

After several installations, disinstalls and reinstallations I am completely unable to use BlackBerryLink on my Windows7 PC: The error message provided immediately after launch of BlackBerryLink is with the title
   "Please wait while the application opens: BlackBerryLink.exe - Application Error"
with detailed message:
   "The exception unknown software exception (0xe0434352) occurred in the application at location 0x75cf812f."
Please provide any advice! My brand new Blackberry Z10 like this is only useful at 50% (since the encrypted SD card is not recognizeable as a normal SD card by my PC), and I would prefer not being forced to byuy other smartphones...
thanks for any advice
Knut

Hi Kodee,
1)     Are using error handling in your code? Are you getting any errors?
2)     What version of LabVIEW are you using? If you are using 8.0 or newer, then you can build a debuggable executable:
Debugging Applications and Shared Libraries
http://zone.ni.com/reference/en-XX/help/371361A-01/lvhowto/debug_apps_dlls/
Regards,
Elizabeth S.
Applications Engineer
National Instruments

"Please Wait For The User Profile Service" message when logging on to TS 2008

I have a Windows 2008 AD Domain with 2 Windows 2008 Terminal Servers. Both are configured identically. I have the TS Roaming profiles stored on a 3rd server and a GPO pointing all users to the roaming profiles. On one of the servers everything works perfectly. On the second server the users, after they input their credentials, get the following message "Please Wait For The User Profile Service". The message can stay there for up to 3 minutes, then they are logged innormall with the correct profile. This problem does not occur on log off. Any help would be appreciated

99% of the times I had this problem it was caused by either DNS issues or network bindings.
Are your servers multihomed? In other words: do you have multiple network cards? If so, make sure your "production" card is on top in the network connections -> advanced settings -> adapters and bindings.
You could also enable user env logging (search microsoft how to do that)

InfoView Errror - Please wait while the document...

Hello, I am looking for some assistance as I am stumped on this. Very recently we have had an issue come up on our InfoView site when people attempt to run a report a progress windows comes up saying "Please wait while the document is being processed." I have gone through many checks to try and troubleshoot but nothing has worked, tried various browsers and versions, java versions, removed windows updates from the server and updated the Crystal Server to 3.1 SP4 and none of helps. It just sits in and endless loop with that error on the screen. I am open to ideas, any suggestions?
Rod

Hi Rod,
Please follow the steps provided below, it might help you.
1.Open Report in Crystal Reports Full Client
2.Click File/Page Setup
3.Click "No Printer" -- This will force the report, when run on the server, to be set automatically to the default printer, instead of looking for the printer driver that was set up on the client machine where the report was developed
4.Click "OK"
5.Click on File/Report Options
6.Remove the check mark from "Verify On First Refresh" and "Verify Stored Procedures On First Refresh" -- This will force the report to skip the process of querying the database to verify metadata information
7.Click "OK"
Let us know if this works for you or not.
Thanks,
Kuldeep G

What's "Please wait while the document is being processed" mean ?

When open a WebI report and click "Refresh Data", then "Please wait while the document is being processed" prompt page be poped up.
Does it mean datas had been refreshed completely when the prompt page disappeared?

When you hit "Refresh Data" button the data will be fetched. If you have lov's in the report then all the lov's data will be fetched and the report data is refreshed accordingly to the lov's fetched.If you hit the refresh data button again without changing the lov values then the report data is fetched for the cache and will be refreshed

The installer found unexpected changes to the install script

Hi,
I've just try to install PC Client 15.7 "EBF 23439: 15.7 SP130" Just downloded from Service Market Place on a Win 03 R2 32 bit and on Windows 12 R2 64 bit
On Win 03 R3 32 bit it works fine but in Win 12 R2 there isen0t any way to run Sybase Central.
When I try to uninstall, on each machine, there are only thi message:
Unable to lunch installer
The installer found unexpected changes to the install script:

Hi,
So you are saying that PC-Client 15.7 SP130 doesn't uninstall? I will look into this.
If you go to your control panel and installed software.
What version(s) of Microsoft Studio do you have installed?
What versions of Microsoft Visual C++ #### Redistributable Packages do you have?
From what I saw they had pulled the Sybase Central out of PC-Client.
You might be able to get from ASE 15.5 version of PC-Client.
Please note that PC-Client with Sybase Central was never certified with Windows 8 or 2012. So you never get Sybase Central to work on those operating systems.
PC-Client 15.5 last drop should have been certified with Windows 7.
Thanks,
Dawn Kim

Crystal reports visual studio 2013. "Please wait while the document is being processed." Error

I am using Crystal Reports for VS 2010. The report is working fine but if you click on the next page or click on group tree,
the message “Please wait while the document is being processed.” comes. Never show next page.
Any ideas?

Hi Qin Yang,
Please post your question in the official
SAP Crystal Reports for Visual Studio forum.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Please wait while the document is being processed

warning...newbie question....
We are using the crystal report viewer on an ASP.NET application.
on the parameter panel there is an edit icon, if the user double clicks this, the report viewer triggers the page to re-load, then it displays a tiny dialogbox that says "Please wait while the document is being processed" but the report viewer never refreshes. the dialogbox never goes always.
1) why does the edit icon show up on all the parameters?
2) what is it doing when someone double clicks it?
3) how can i hide or disable it?
any help would greatly be appreciated!!!

Is this happening on your development computer or after you deploy the app?
it happenes both in dev and on the servers
Is this an app you wrote? (I don't recognize this error "Please wait while the document is being processed" as a Crystal reports error)
no, it's a small dialog that the viewer is generating when the user clicks on the edit icon in the viewer
If this is on a deployed system - how was the CR runtime deployed?
uggh, i grabbed the MSI that was referenced in the product.xml
What is the OS?
XP on dev, win2k3 on the server
What is the database?
MS SQL 2005
What is the database connection method?
ADO Client
Are yo changing the database connection information (e.g.; new server, database)?
when the report is instantiated, we set the db connections and the report works, it just kind goes off to never never land when the user click the edit icon in the report viewer.

I downloaded mavericks but closed the installer afterwards,where do I find it to complete the install?

i downloaded mavericks but closed the installer afterwards, where do I find the download to complete the installation process?

If it follows the same convention as Lion and Mountain Lion, the installer should be in the Applications folder.

NWDS installation issue - "Please wait... completing the install"

Similar Messages

Maybe you are looking for