NWDS view not refreshing after changes in layout

Hello experts..
I'm using NWDS 7.0.13 and every time I'm modifiying a webdynpro view in layout mode the view does not refresh, instead I get this message:
This program cannot display the webpage
   Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
What you can try:
     Check your Internet connection. Try visiting another website to make sure you are connected.
     Retype the address.
     Go back to the previous page.
     More information 
In order to display the changes I have made, I have to close the WD View and re open it, the funny thing is my other team mates can change their views and see their changes inmediately without closing/opening the view.. hope anybody can help me out on this one..
Thanx in advance..
JV

Jesus,
Do you have IE7 on your machine??  IE7 with a certain patch causes this issue.
Check this thread for more details
Probblems Net Weaver Developer Studio (NWDS) caused by Internet Explorer 7
Chintan

Similar Messages

  • NWDS WebDynpro views are not refreshing after changes in layout...

    Hello experts..
    I'm using NWDS 7.0.13 and every time I'm modifiying a webdynpro view in layout mode the view does not refresh, instead I get this message:
    This program cannot display the webpage
    Most likely causes:
    You are not connected to the Internet.
    The website is encountering problems.
    There might be a typing error in the address.
    What you can try:
    Check your Internet connection. Try visiting another website to make sure you are connected.
    Retype the address.
    Go back to the previous page.
    More information
    In order to display the changes I have made, I have to close the WD View and re open it, the funny thing is my other team mates can change their views and see their changes inmediately without closing/opening the view.. hope anybody can help me out on this one..
    Thanx in advance..
    JV

    Hi Armin, thanx for your answer and effectively I have installed IE7, I read other posts and after reading the "solutions" I rather close and open my WD views insted of removing security patches of IE.. I guess I'll have to wait until SAP fixes this and meanwhile I'll work the way I just mentioned.
    I'll let this question unanswered until this fix comes out.
    Cheerio !
    JV

  • Prompt constrain - prompt values are not refreshed after change in calendar

    Hello,
    I have prompt with Date, OrgUnit and Employee field in OBIEE 10g.
    Date - calendar component "date between"
    OrgUnit - multi-choice
    Employee - multi-choice
    I have checked "Constrain" checkbox on Employee field, because I want to show only employees from selected OrgUnit and also I have checked constrain on Date field.
    After first selection everything works fine. I select some dates (I have calendar component - date between), some OrgUnit and I can see list of employees constrained by selected OrgUnit and Dates
    - physical select is executed to get list of employees to multi-choice component
    After that I change date interval, open employees multi-choice component but no physical query is executed and I will get back some cached result from previous request.
    It seems that change in calendar component does not force refresh of data in other constrained components.
    If I select some other OrgUnit, Employees are refreshed.
    I tried to change component for Date from calendar to multi-choice. After some change of dates in multi-choice component. OrgUnit and also Employees are refreshed.
    I also tried some different combinations of constrain checkboxes but with no success
    So my question is: How can I force refresh (force execution of sql query) data in constrained fields after some change in calendar component?
    Thank you

    In my case It doesn´t refresh after change in calendar component. It does refresh after change in multi-select promot, or dropdown component, but doesn't refresh after change in calednar component.
    BI server cache is not enabled.
    If I open employee multi-choice component for the first time, physical query is executed. I change date to some other, open employee component for second time and no query is executed and I will get old values from previous action...

  • Bex Saved  views not working after changes in query

    Hi Experts,
    we have an issue in saved views(Bex reports.
    Users execute the Bex reports and do drill downs according to their requirement and save it in their local machine.Whenever they want to do reporting they just open the saved report and do refresh which fetch the latest data from the backed system.
    But as a developer we do the changes in queries(like adding extra rows or any other changes in queries without changing the row and column structure) and transport to production..
    When user opens the old saved and do refresh(this will connect to SAP), it doesn't show the latest changes(extra row added in the query)
    So user complains every time they have to open a fresh report and do drill downs according to the requirement.
    We informed that its unavoidable, But Any idea to avoid this issue? please suggest?
    regards
    Pradeep
    Edited by: pradeep v on Nov 7, 2011 2:15 PM

    Hi
    Its not possible user has to execute the report freshly and have to save the views.
    But there is an option if you save views in server i.e. what ever required formats that to be saved in the server whenever new changes comes then as a developer you just open that view and refresh and save it again.
    Regards
    Jagadeesh

  • Management Studio 2008 does not refresh after table create / alter

    hello
    Management Studio 2008 does not refresh after table create / alter, why?
    f5 / refresh button does not work in "Object Explorer".... i always need the restart the whole application to see any changes, this is strange...
    regards, jan

    Hi jm,
    I’m writing to follow up with you on this post. Was the problem resolved after performing Vishal ‘s steps? If you are satisfied with our solution, I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any new findings
    or concerns you may have.
    Thanks,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Manual rebate condition exclusion not refreshed after redetermination of it

    Hi Experts.
    I am working with CRM 4.0.
    Lately, we realized there is an error occurring in the price deternination:
    The condition exclusion for manual rebate condition is not refreshed after redetermination of the product. There is missing a price validation before saving the document with the new product.
    Step-to-step description of the error:
    1)     I am creating an order in trx. CIC0 or CRMD_BUS2000115 and determine the product (sector A).
    2)     Now I assign a manual rebate (condition Z...) of 20 % on item level.
    3)     On header level I replace the product to one of another sector (B).
    4)     I check the pricing conditions of the new product on item level. The same rebate of 20 % is maintained.
    This is an error, because the condition exclusion for products of sector B allows rebates only until 5 %.
    Can anybody help me, please.
    Best regards,
    Cristina

    This is not standard due to information of SAP OSS.

  • B210a will not print after changing router\modem

    b210a will not print after changing router\modem. Says it is connected to network, but will not print and says unavailable

    Good morning,
    Please use the second section of the following article to fix:
        http://www8.hp.com/au/en/campaigns/wireless-printing-center/reconfiguring-system-help3.html?jumpid=r...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Screen not refreshing after sleep mode

    Hello All,
         I have had a problem since 10.7.XX where my screen does not refresh after the computer goes into screen saver mode and then into sleep mode. When I move my mouse to resume i get a line drawn where I move my mouse and it reveals the login screen slowly. I can click on a login account and a small section of the screen refreshes where the login password is. Once I login it goes away. Was hoping Mountail Lion would address, but the problem continues from Snow Leopard. I am on a Imac 24" 2009 3.06Ghz dual core with 4 Gig of Ram, Nvidia GeForce 8800 GS 512mb. Thanks in advance for any advice.
    Chad

    Hello,
    See if it's related to this...
    It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
    The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
    http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
    "Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
    The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
    A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
    About iMac sleep...
    http://forums.macrumors.com/showthread.php?t=1529750
    Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
    http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

  • Sql is not working after changing from MsAccess into sql server

    Following Sql  is not working after changing from MsAccess into sql server. 
    sum(trn.sales) as sales,
    sum(trn.cost) as cost,
    sales - cost as profit // Here is not working . can we not use sales a column. Please advise
    from trn
    Kind Regards
    pol
    polachan

    It will not work if use two different column from the table or column  from two  different table
    Example
    sum(trn.sales * trn.rate) as salesAmount,
    sum(trn.cost) as cost,
    sum(trn.salesAmount)-sum(trn.cost) as profit ----- Here is not working . can we not use sales a column. Please advise
    from trn
    Regards
    polachan

  • How can i refresh view on query after changing the query?

    Hi,
    i built few view's on 1 query in BI7. after i made a change in the query i haven't seen it in the view, why?
    it's not refreshing automaticly from the query? and if it's not, how can i refresh the view?
    thanks
    Meirav
    Edited by: Meirava on Apr 2, 2009 11:43 AM

    Hi,
        You need to refresh that view and once again save the view with changed settings. Then it will brings according to the query changes.Once check the variables also.
    Regards
    Pcrao.

  • Form layout is not updated after change

    Hi, I have this problem with my interactive form in webdynpro abap:
    I change layout of my form (change some texts, add buttons....), activate change without any error. But after showing form in my webdynpro application, there is NO change in layout of my form, still old layout is showing. Where should be error?
    If I uncheck "Allow Form Rendering To Be Cached on Server" in Performance tab in Form Properties in layout editor in SE80, only ADS error is showed instead of my form in my webdynpro application.
    Error from ADS is: com.adobe.ProcessingException: No output was generated while rendering: Stream for: PDFOut.(200.101)
    Many thanks for answer!
    Edited by: Jiri Neuzil on Jul 14, 2009 10:39 AM

    Hi,
    I went tru all configuration settings, but ADS passed all tests from ABAP side, so I think everything is configured correctly. But I have found something in my Java server in web dynpro SAP Netweaver administration in Analysis -> Debug -> Logs and traces:
    First error:
    $$$/com/adobe/document/xmlform/msg.XFA=Error creating PDEFont for font MS-Mincho.
    Second error:
    $$$/com/adobe/document/xmlform/msg.XFA=Cannot render text (  ). See previous error.
    Another error:
    Error Log file "2009.07.14.111847SAFPXNEUZI02.pdf" written to C:\usr\sap\J2E\SYS\global\AdobeDocumentServices\renderErrorLog\errorFiles - but this file doesn't exists in specified directory
    Another error:
    Processing exception during a "Render" operation.
    Request start time: Tue Jul 14 12:27:40 CEST 2009
    com.adobe.ProcessingException: No <Render><Template> specified
    Exception Stack Trace:
    com.adobe.ProcessingException: No <Render><Template> specified
         at com.adobe.ads.operation.Render.validate(Unknown Source)
         at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
         at com.adobe.ads.request.Request.processOperations(Unknown Source)
         at com.adobe.ads.request.Request.process(Unknown Source)
         at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
         at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
         at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
         at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
         at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
         at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
         at SoapServlet.doPost(SoapServlet.java:51)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Many thanks for any answer!

  • Workbook not refresh after running Planning Function (BI-IP)

    Hi! Folks,
         I have a problem with the Bex Analyser which not refresh the data after running Planning Function.
    Step 1: Run Planning Function (There are some changes in records)
    Step 2: I have to Run Process Variables again and input the same selection in the pop-up variables
    Step 3: The changed records will be shown...
    Can I have some coding in the Layouts of Bex Analyzer to refresh the data after running Planning Function?
    Brgds,
    Supasake

    Hi,
    I had a similar problem that the resuls of my planning function were not automatically shown. Only if I did "something else" like saving or running another function the results were displayed.
    I think I solved it by upgrading my SAP GUI6.4 with patch 14. the results of planning functions should be automatically displayed.
    D

  • Master-detail: detail field not displayed after changed by master field

    I want to use the Depends on item with Clear/refresh value functionality in a master detail situation. Within the same group it is no problem to use the setter method of a field to change a second field and then displaying this new value. But in the detail group, I can not select items from the master group as a depends on item.
    In the setter of the master field, the value in a field for each row in the detail (table layout) is updated. The only problem is that this updated value is not displayed, the old value doesn't change. When saving the changes, the displayed value is committed to the database. When de updated field is not displayed at all, the correct value is saved, so I know the detail field is updated.
    How can I make sure the displayed value in the detail is displayed after changeing a master field? I already gave the detail field the correct partial trigger.

    Wouter,
    I guese you don;t see the changed value when you display the detail item because after the depends on item update changed the detail item, JSF procesing continues and the detail table changes are sent to the server which will override again the detail item attriibute, resetting it to the old, still displayed value.
    So, the trick is to get PPR working. Make sure the partialTYriggers property of the detail item is set to the value of the id property of the master item. If it still doesn't work, try setting the partial triggers property on the table, instead of the individual item.
    Steven Davelaar,
    JHeadstart team

  • Attribute binding value not refreshed after transaction rollback

    Hi,
    Using ADF Faces/Trinidad + ADF Data Bindings + ADF Business Components.
    I was experimenting with task flows vs transaction control vs form validation and met the following problem.
    First, here's a little intro to my application design. A page template defines the layout. There's only one page in the application using a dynamic region to show a dynamic task flow. The template defines a menu containing navigation items; each item action changes the current dynamic task flow id.
    One of the flow starts with a data bound table listing users. Each row has an edit button to navigate to an edit form. The edit form is in a separate task flow as I want the automatic rollback triggered when a flow is abandoned.
    The problem occurs when I quit the form clicking a menu item AFTER a validation error occurred. Transaction is rollbacked as expected, however when I go back to the form (whatever row I choose), the invalid value that failed the previous validation is shown.
    It seems the attribute binding is not refreshed. To validate this hypothesis, I added a button that explicitly calls refreshControl on the attribute binding as shown below. When the button is clicked, the form shows the correct value.
        // In a managed bean
        public void refreshFirstName(ActionEvent evt)
            getBindingContainer().findCtrlBinding("FirstName").refreshControl();
        }I working on a possible workaround, but I've not succeeded yet. I'm looking into using the finalizer of the task flow (or possibly the initializer) to force a refresh of the control bindings.
    Any ideas?
    Thanx!
    Olivier

    Hi,
    I am experiencing similar strange behaviour, it sounds like it could be related, i am not using task flows though.
    I have a read only table, and when a user double-clicks on a row an af:popup is displayed which displays an edit form (contentDelivery is set to "lazyUncached" in the popup). Pressing the cancel button on the edit form executes a rollback and hides the popup. However, after this has occurred, whenever another row (or the same row) is selected in the read only table, the edit form will display data from the old record that was rolled back. I've noticed that the old data is only displayed in editable fields, while the correct data is displayed in read-only fields. I'm pretty sure the rollback works properly, and the iterator is on the correct row, just it is displaying incorrect data in the editable text fields. I've tried implementing cancel functionality with both a rollback action and refreshing the row using REFRESH_WITH_DB_FORGET_CHANGES, but the same issue exists regardless of which method is used. I've also noticed that the application starts behaving correctly again if the commit button is pressed.
    Has anyone come up with a workaround for this issue?
    By the way, is there any way we can keep track of the bug numbers that are mentioned in this forum?
    Thanks,
    Michael.

  • Master-Detail Detail does not refresh after it's been empty

    I have a master detail page (both are tables) that works just fine, until I click a master record that has no details.
    After that the panelHeader of teh detail is refreshed with the PPT but the table underneath it is not, I keep seeing "no rows yet", no matter which master record I click.
    When I go to a different page and return it's fine again.
    Only one of my pages has this behavior, I tested this on another and it was fine. Has anyone seen this behavior before?
    My console has this message:
    May 11, 2007 10:52:38 AM oracle.adfinternal.view.faces.model.binding.FacesCtrlRangeBinding$FacesModel getSelectedRow
    WARNING: rowIterator is null
    Message was edited by:
    Wendy Tromp

    Ok I found it,
    My details iterator had the following properties:
    <iterator id="AfdelingMedewerkersIterator" RangeSize="-1"
    Binds="AfdelingMedewerkers"
    DataControl="PRBAppModuleDataControl"
    Refresh="IfNeeded" RefreshCondition="#{!adfFacesContext.postback}" />
    I have no idea why I set it like that, but removing the Refresh properties fixed my problem.
    I am still clueless as of why this led to the behavior as described above. I could have understood it if my iterator was not refreshed at all, but I have no idea why it stopped working only after the details were empty and not a second before...
    Anyway, problem solved!

Maybe you are looking for