NWSAPSetup.exe - is there a way to specify drive other than c:\

Hi all, has anyone ever tried a /silent or a /noDlg installation which went to a hard drive other than c:\ ?  We have a situation where this may need to be done for a Citrix Server.  This is the Windows version of SAGUI 7.10 - Thanks!

I'm tink you need check the Package parameters --> the variable SapFrontEndDir .
Create for example new package for this purposes, and change this variable ...
Open package, go to "Configure Packages" --> press on "Configure Parameters"
and select this variable --> SapFrontEndDir .
Regards

Similar Messages

  • Is it possible to have my text messages sent to my email as well?  or is there a way to view them other than on the phone?

    is it possible to have my text messages sent to my email as well?  or is there a way to view them other than on the phone?

    Sure. Go to the conversation that contains the message(s) you wish to forward. Tap the Edit button in the upper right corner. Select the message(s) you wish to forward using the radio buttons. Tap "Forward" at the bottom right of the screen.

  • Is there a way to play videos other than getting them through itunes

    is there a way to play videos other than getting them through itunes.  I have lots of dvd's that I want to play on my ipad but don't want to have to buy them again through itunes.

    You'll need to rip the DVDs to your hard drive using a tool such as Handbrake. Be sure to rip them in an iPad compatible format. Then you can drag them into iTunes and sync them to your device. It is a little bit of work but that's really the only way without (as you say) rebuying them in iTunes.

  • Is there another way to close apps other than deleting them from the multitask bar.....I have a small crack in the bottom of my screen and that part of the screen does not recognize the touch.  :(

    Is there another way to close apps other than deleting them from the multitask bar.....I have a small crack in the bottom of my screen and that part of the screen does not recognize the touch. 

    There's generally no reason to be closing them that way at all. The apps you see in the recents bar are just that, apps that you used recently. Most of them are doing absolutely nothing. The only apps that are really doing anything in the background are ones that play music and ones that are using location services. Just leave them be.
    Best of luck.

  • I wanted to know how to view the gifts I've sent to people and (if possible) know if they received and downloaded them. Is there any way to do that, other than asking the person?

    I wanted to know how to view the gifts I've sent to people and (if possible) know if they received and downloaded them. Is there any way to do that, other than asking the person? Obviously I want the gift to be a surprise (for my best friend specifically) so asking them if they received it would ruin that.

    Have you tried resetting your iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.

  • I somehow deleted my hard drive.  Is there any way to fix this other than buying a new computer?

    I somehow deleted my hard drive.  Is there any way to fix this other than buying a new computer?

    Sure.
    If your hard drive is still physically working, simply restore it from your computer's backup.

  • Is there a way to delete emails other than one at a time?

    Is there a way to delete emails other than one at a time?

    You can select multiple emails at a time for deletion, but there is no option to delete all email from an account's Inbox mailbox at once.
    If the account is an IMAP or Exchange account, delete all email from the account's Inbox mailbox with the email client on your computer used for accessing the account or via webmail access for the account using a browser on your computer. All server stored mailboxes with an IMAP or Exchange account are kept synchronized with the server with each email client used to access the account.

  • After using iMatch, I have duplicate music.  Is there any way to remove duplicates other than manually?  Thx

    After subscribing to iMatch, I now have duplicate music in iCloud.  Any way to delete duplicates other than manually deleting each one?  Thx.

    Hi Jim,  I don't understand how this would help me in my situation.  I loaded an old project, selected the clip edits that I needed, and then loaded the new project and pasted those edits into it, thus creating a duplicate multi-cam sequence.
    Are you saying that before I paste, if I navigate to the old project in the media browser and import the multi-cam sequence into my project, Premiere will merge that with the exact same multi-cam sequence in my new project so that when I paste it won't create a duplicate?

  • HT1451 i have and can find all duplicates in my library - after i find them is there a way to delete the other than one at a time

    i have and can find all duplicates in my library - after i find them is there a way to delete them (in mass) other than deleting one at a time?

    The only way they would all come over is if your wife had automatic downloads turned on in her store settings on the phone before she downloaded the apps. A popup for this option also comes up when you first sign into an apple id on the phone in the app store. If she didn't have that setting turned on, she'll have to download them one by one.
    She could also try to sync them over from a computer that has itunes on it

  • Is there any way to decrease latency other than changing the I/O buffer

    Hello,
    I'm recording with two presonus firepods linked together. which allow for me to record up to 16 track at a time. I'm noticing some latency that makes it somewhat hard to record with. I do not want to lower the buffer for fear of intruducing distortion. is there any other way to lower latency levels in logic? If not would switching to a different interface help? if so, which one can you recamend?
    thanks

    After you've determined the smallest possible buffer setting for your system to run properly, the easiest way to achieve a minimal latency system from that point on is to have an external mixer for monitoring the audio you're recording. This way you're don't have to monitor audio thru your DAW software.
    Apparently, software monitoring latencies are getting better (see the extensive thread/debate about the Symphony system on this forum -- search for "Symphony"). The only reason you'd need to use software monitoring is if you use plug-ins on the input channel(s) of what you're recording. Otherwise, software monitoring of audio thru your DAW does nothing but add latency (delay) to your monitored signal, as well as cause you to go prematurely gray in trying to deal with it.
    I believe the Firepods are FW devices, and if so, there could be not only an increased amount of latency over, say, PCI-based systems, but the amount of latency might be variable every time you boot your system (there are extensive threads about this phenomenon on this forum -- do a search and you'll find them). If you're experiencing this, it is probably due, in short, to problems with the way the FW drivers are written.
    I have a PCI-based system (MOTU, PCI-e 424) and putting arguments over whether MOTU stuff sounds the same, better, or worse than any other audio interface, this kind of system never experiences random changes in latency.
    The other thing you must do is calibrate your recording delay. Again, with certain FW systems you might have to do this each time you boot your system. But I can tell you that with the card-based system I'm using, my latency and hence my recording delay settings never change, and I can be assured that what I record plays back in exactly the right spot every time.
    BTW, the recording delay can be adjusted by using a simple looback test (again, there are numerous threads on this forum which explain how this is accomplished).

  • IOS5 has restored over 7000 previously deleted emails to our i-pad. Is there any way of deleting them other than 'edit' and ticking them all off? It'll take days!

    iOS5 has restored over 7000 previously deleted emails to our i-pad. At this point, we cannot find a way to mass delete them. Anybody got any ideas?

    Problem solved by emptying deleted file on the computer and then deleting and re-installing email accounts on the i-pad.

  • Is there a way to fix permissions other than disk utility?

    I have a G5 PPC, dual 2.3 Ghz, and I recently upgraded from tiger to leopard 10.5.8. I have stability problems on several programs (freeze). I have run Disk utility from within the OS and from the install disk. It ID's permissions differ (many are on Front Row) but it doesn't repair them. Is there a fix?

    None of that sounds like a permissions issue and are unrelated to Front Row. I would be more inclined to believe you had issues in your Tiger installation that are now propagated into your Leopard system. I would suggest you might try an Archive and Install, and if that doesn't help then I'd erase the drive and install Leopard from scratch (backup first.)
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Are there any way to purchase apps other than using credit cards?

    Just like having bank deposits, etc.

    iTunes gifta cards available at all kind of stores, Paypal and refillable Visa/MC/AMEX debit cards.

  • Is there a way to specify where an app starts on your screen

    Is there a way to specify where the JFrame will appear on your screen at runtime by default? For me it always starts on the upper left hand corner, and I want it more in the middle.

    Sorry, that should actually read:
        frame.setSize(800, 600);       
        // center the frame       
        Dimension size = frame.getSize();       
        Dimension screen = Toolkit.getDefaultToolkit().getScreenSize();       
        frame.setLocation((screen.width - size.width) / 2, (screen.height - size.height) / 2);       
        frame.setVisible(true);cheers,
    Greg

  • When using the built in web server, is there a way to specify a different

    When using the built in web server, is there a way to specify a different error handler when you try to access a NON .CFM file? Right now I get the standard:
    java.io.FileNotFoundException: filename.ext
    Is there any setting to override this and direct the message to your own .cfm template? The missing template handler in the CF Admin work only for .cfm files.
    Thx

    The in-built web server for ColdFusion 8 is JRun. I am on ColdFusion 10, however, and so cannot offer hands-on advice. (CF10 replaced JRun with Tomcat.)
    My guess is that you have to modify the file {CF_ROOT}/WEB-INF/web.xml. Don't forget to create a back-up first!
    You may then proceed as follows.
    1) In the ColdFusion root (CF_ROOT), create the file myCustomFileNotFound.cfm. Give it some content, like
    My custom File Not Found page. Current time: <cfoutput>#now()#</cfoutput>
    2) Open the file {CF_ROOT}/WEB-INF/web.xml in a text editor. Add the following error-handling specification just before the end tag </web-app>:
    <error-page>
    <error-code>404</error-code>
    <location>/myCustomFileNotFound.cfm</location>
    </error-page>
    Save the file web.xml.
    3) Restart ColdFusion. Test by browsing to a URL requesting filename.ext

Maybe you are looking for