NX Invisible Layers do not come into A3D

I recieved an NX 4.0 file from a client and the import did not process the Invisible layer data. During the import into A3D I used the option to inclued hidden (in fact I had all option turned on).
Are there any options to process all of the data in the file?

UG Layer management within A3D does not reflect UG behaviour.
If you want to see invisible layers, this means that within UG these layers are not set as Work (meaning visible, selectable and so on). By default, the option Active Layer is active within A3D. In order to see the invisible layer, you have to check Hidden Object and uncheck Active Layer. In the Model Tree, you will be able to make visible what you want but you have to be aware that the result may be messy as all is visible.

Similar Messages

  • When i save a picture in a web page, the picture does not come into my photo albums! I don't see it anywhere. Plz help

    When i save a picture in a web page, the picture does not come into my photo albums! I don't see it anywhere. Plz help

    Does it show up in your camera roll?

  • When i try to email photos the collage tempalte does not come into email

    when i try to email photos the collage template does not come into the email

    In the iPhoto preferences accounts tab delete the account that is not working and re-enter it
    Or better yet IMHO set apple mail as your email client
    LN

  • Thumbnails will not come into focus

    Hello,
    I am using PSE 8 and when I am in the organizer and double click on a photo to make larger it will not come into focus.  Is it damaged or can it be fixed?

    Try rebuilding the thumbnail cache:
    http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Recreate_Organizer_thumbna ils

  • Open orders sud not come into effect..

    whenever 'm running MRP, system is showing all open orders (sales orders, STO's, Purchase orders)since from 2002 & 2003, & taking into account in MRP run also.
    but my requirement is that it sud only take into account the open orders which are april'07 onwords not before than that.
    how to do..

    No this is not possible to control..only option is we have to close all the orders which have been completed logically like the sales  order,STO,Purchase order etc..
    since they have not been completely closed due to business reasons..System will not be able to identify ..for SAP it is also treated as open orders..
    so we have to take care periodically ensuring that all the unwanted demand has to be properly closed...
    reg
    DsK

  • Message Not comming into SXMB_MONI

    Hi Friends,
    I am doing File - idoc Scenario.
    My Sender File adatper is picking source file successfully.
    But, when i see in the SXMB_MONI, message is not showing in to the   SXMB_MONI.
    when check my Communication Chennel in RWB, its showing Warning like below
    "Message Found Empty".
      Please anyone tell me what is the problem.
       Regards,
       Vijaya

    Hi Vijaya
    Please look this link.
    /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
    http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
    /people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
    https://www.sdn.sap.com/irj/sdn/weblogs?
    blog=/pub/wlg/1629.
    hope this will help u ....

  • One customer entry is not comming into datasource.

    Hi,
    I did not get one of customer Line item details in Datasource. But i can see the data  in FB03. what will be the reason.
    Regards.

    Hi,
    yes, i have not seen in datasource. i have checked with Customer and Fiscal period. but i did not get the perticular customer line item details. But i have seen in FB03. what will be the problem.
    Please give me suggestions.
    Regards.

  • Function exit ..not comes into effect.

    Hi,
    i made changes in one function exit which is called in me21.
    i activated n placed break point.
    still it's not going in to that ...
    what wud be the problem..
    Help me.

    ravi,
    As i am new to this txn...plz guid
    i created project...
    in Enhancement assignments what can i give?
    i want fucntion exit..exit_XXX to be activated..
    where can i do this?
    Message was edited by: raja gurrala

  • ITunes Windows do not come to the front when app is selected

    When I Command-Tab to bring iTunes to the front, the open window does not come into focus. This behaviour is definitely not following human interface guidelines. It's the same when I click iTunes from the dock.

    I'm having the same issue. It takes two clicks to bring iTunes window to the front. App switching or clicking on the dock icon will activate the application, but will not bring the iTunes window forward. I either have to click on the dock icon a second time or select iTunes in the app switcher again. Very strange.

  • When i plug my itouch into my computeri get a pop-up that says "this ipod cannot be used because the apple mobile device service is not started." and when i plug it it my itouch name does not come up on my itunes, how do i start it and fix this?

    When I plug my iPod Touch 4g into my computer I get a pop-up that says "This iPod cannot be used because the Apple Mobile Device service is not started." And when I plug in my iTouch the name of the iTouch does not come up on my iTunes. How do I start the Apple Mobile Device? How do I fix this?

    I'd start with the following document with that one:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • TS3648 great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp

    great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp 3.0.4.

    Here's what I get:
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0 mtu 1280
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:11:24:7d:e7:1e
    media: autoselect (none) status: inactive
    supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::211:24ff:fe28:2e71%en1 prefixlen 64 scopeid 0x5
    inet 169.254.115.141 netmask 0xffff0000 broadcast 169.254.255.255
    ether 00:11:24:28:2e:71
    media: autoselect status: active
    supported media: autoselect
    fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
    lladdr 00:11:24:ff:fe:7d:e7:1e
    media: autoselect <full-duplex> status: inactive
    supported media: autoselect <full-duplex>

  • Why while in Bridge Load Files into photoshop Layers does not work?

    In Bridge, Tools>Photoshop>Load Files into Photoshop Layers does not work.  I have two images selected and when I execute that comman in Bridge nothing happens.  I exited and restarted both PS and Bridge and still nothing.  I am working in Windows 7 and Photoshop cs6.

    No I tried File/scripts/load file into stack and still did not work.
    There was an update to bridge and now it works.  Thanks so much.

  • My iphone will not come on unless plugged into the wall charger

    my iphone 4 went completely dead since then i tried chargeing it with a charger bought from sams wholesale which was an aftermarket charger which did not work i then plugged it into the factory wall charger it comes on but says searching for signle i talked to apple support ny telephone and they said i need to restore my phone but unless plugged into the wall the phone will not come on please advise on this

    rustyfromhouma wrote:
    i do not have anything on my phone stored
    If you mean you didn't backup or sync your phone, everything on it will be lost when you get a replacement unless the techs are able to do this.  Apps can be re-downloaded.

  • I was on the phone last night and my phone randomly turned off.  It will not come back on even when I have tried to hold the home button and the power button together while being plugged into the computer.  What do I do?

    I was on the phone last night and my phone randomly turned off. It will not come back on even when I have tried to hold the home button and the power button at the same time, while being plugged into the computer? What do I do?

    Plug it into power for at least 15 minutes.  If it doesn't automatically come on, try a reset... press the home and sleep (on/off) buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • HT5024 It states that it takes 24hrs for changes to come into effect. However, what does it mean that it may retains my review in the system indefinitely, so if I rate it 1 star by accident, and changed it to rate 5 stars, the 1 star rating is not removed

    It states that it takes 24hrs for changes to come into effect. However, what does it mean that it may retain my review in the system indefinitely? So if I rate it 1 star by accident, and changed it to rate 5 stars, the 1 star rating is not removed?

     Hi,
    One of my ex-colleagues has installed a NI-DAQ 6.5 in our system. [And I do not see any other naitional instruments card in the CPU of the computer, may be he removed it] I deleted the account and all his files in the system. When I am trying to install version8.0, its not getting installed and giving me a message that I should uninstall the previous version by going to Add/Remove programs in the control panel.
    I tried doing that, but the "Change/Remove" button does not seem to work...[There is no response and so unable to install the new version...]
    Any idea how can this problem be solved?
    It is a windowsXP operating system with SP2 installed on a machine with P4 processor.
    Thanks

Maybe you are looking for

  • How do I get the app store to allow me to enter my apple ID instead of someone else's?

    I am a co-administrator with another user on my iMac, and the App Store keeps asking for their apple account password to be entered. I can not find how to change that so it asks for mine, and the other user is not present to ask for them to enter the

  • Is it possible to perform a "Clean Install" of AsyncOS on my c100 ESA?

    after decommissioning this c100, both Hard Disk Drives (HDDs) were removed, reformatted, and reinstalled in the ESA by the IT Group. Is there a method to reload the AsyncOS on this appliance?  Or do I now have a clean "brick"? Please help. Regards

  • How to add text to Imovie

    Hi there, As a new user of an Macbook, and iMovie, I cannot figure out how to add texts to my movies. I do understand that I can add titles, but that doesn't allow me to change positions nor allows me to edit the font in the extent that I want to. Na

  • Saving space in table

    Hi, Any idea on how you got into this situation ? i have storage problem in table. when i delete row in table. deleted rows also take space. how will release that space when database is working in 24*7 enviroment Regards, shahique

  • Power on password reset

    My laptop is asking for an administrator or power on password. I get the message Key:64439020 after 3 failed attempts. How can I reset/clear this password so I can turn on my laptop? This question was solved. View Solution.