NX-OS - How include or exclude an OID from the SNMP view entry???

Hi, I'm working with Nexus 7010 - System version: 5.1(3).
For example, in the 7200 we can include or exclude an OID from the SNMP view entry using the command #snmp-server view.
How can we include or exclude an OID from the SNMP view entry in the Nexus 7010???
Thanks.

Greetings Marcelo,
SNMP views are not currently supported on NX-OS. You can use Role-based Access Control to restrict what SNMP users can manage which is somewhat limited in scope - mainly permit/deny read/write access to specific features.
Cheers,
/Phil

Similar Messages

  • How to remove links to adobe from the image viewer

    On my site I need to display lots of pictures. I used the
    image viewer flash element from the `insert`-`media` tabs.
    Everything works great, but the first few pics in the
    slideshow are clickable, and link to the adobe home page. How could
    I remove the links and make the pics not clickable. I already went
    into the flash element properties window and made the `image links`
    and `image link targets` blank. I don`t know what else to try.
    Please help!
    thank you: Tibor

    It's only necessary to post once. No answer usually means
    that nobody knows
    the answer....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "serestibi" <[email protected]> wrote in
    message
    news:frm8qo$26v$[email protected]..
    > On my site I need to display lots of pictures. I used
    the image viewer
    > flash
    > element from the `insert`-`media` tabs.
    > Everything works great, but the first few pics in the
    slideshow are
    > clickable,
    > and link to the adobe home page. How could I remove the
    links and make the
    > pics
    > not clickable. I already went into the flash element
    properties window and
    > made
    > the `image links` and `image link targets` blank. I
    don`t know what else
    > to
    > try. Please help!
    > thank you: Tibor
    >
    >

  • How do I print a page from the month view on my iPad?

    I need to print a page from my calendar for travel. Any suggestions how to do this?

    Take a screen shot of the page, then print it from your Camera Roll.
    Open the calendar to the page you want to print.
    Press the home button first, then immediately press the power button and you'll hear a shutter click like a camera.
    Go to your Camera Roll and you'll see a picture of the screen shot.
    If you have an Airprint printer associated with your iPad, print it.
    If you don't, email the photo to a system you can print from.

  • How do I insert Greek characters from the character viewer in Lion?

    In Lion, the Character Viewer shows many more options for different characters than SL.  Of course, it displays Latin, but, as I scientist I often need to insert Greek characters, but I cannot find Greek characters in the Character Viewer.  I don't otherwise need to select Greek as a language.  Inserting Greek characters from some applications like MS Word still works.
    And ... while I'm here ... what happened to the "insert" button?  -j

    Click the gear icon to edit your list:
    Select Customize List:
    and check "Greek"

  • How do I get routing data from the Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application.

    I have a tableView displaying a list of contacts from a Cloud Database.  After selecting a contact, I push to a programmatically created MKMapView.  Then I display the initial region (the view) that includes the users current location (starting point) and their selected destination (end point).
    Now I want to display annotations (as described in the Location Awareness Programming Guide) that displays polylines which will represent the turn-by-turn navigation IN MY OWN APPLICATION, and not in the Map App currently used in IOS6. 
    Due to licensing and its becoming depricated in IOS 6, I do not want to get routing data from the Google Maps API.  How do I get routing data from the IOS 6 Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application?
    I checked out Stack Overflow and other forums which basically left me with the impression that this is not possible. I also checked out the TomTom iPhone Mobile SDK User Guide from the TomTom Developer Portal and am still confused.  It must be possible to retrieve routes, since the Map App can display turn-by-turn directions.  How can I retrieve turn-by-turn data that I may display as a route within my own application?

    Thanks Michael. Apologies for the slow reply I was away for a bit (holiday blitz at work and visiting family madness etc.etc.) back now, I set both options you requested to "never " and retried the CMS software with no change. 
    I do have progress of a sort though, as a test I took a separate test PC and put a clean install of Win7 on and loaded up the CMS software (it worked perfectly) and then took the version of ole32.dll off that machine and put it onto the computer I had built
    for her (using Linux) and...
    got a new error code. Darn I was so sure I had found a clever solution this time lol.
    Anyway now when the CMS fails it gives me a similar error but the offending module is "ntdll.dll" sooo... I tried taking the "working" version of ntdll.dll from the test box and moving it over (making sure to back up the existing ones
    first so I could put them back if needed) to her new PC and the PC would not boot. 
    It seems to want the original versions of a few Dynamic Link Libraries and if I could somehow give it those while not breaking Win7 it should theoretically work seeing as it no longer errors with ole32.dll. 
    ntdll.dll however seems necessary for Win7 to boot.
    So what I am wondering now is:
    Is there some way to have both versions of the DLL file in the system32 folder (bypassing the "cannot have two files with the exact same name in the same folder" thing) or rename the original DLL's something else and somehow make the CMS look for
    the new named versions so the system has the updated DLL's it needs to boot/run and the CMS has the old ones it wants to run or is there someway to have a self contained install of the CMS, say on a USB flash drive and give it it's own E:/windows/system32/needed
    dll's  path to the files it needs? 
    Willing to try any other options or settings you may have come up with as well.
    Thanks again for your reply and my apologies for not answering sooner.

  • HT201317 My husband bought an Ipad 3.  He gave me his Ipad 2.  How do we get home movies from the 2 to the 3?  I want to restore the 2 to the factory settings, but not lose these movies.

    My husband bought an Ipad 3.  He gave me his Ipad 2.  How do we get the home movies from the 2 to the 3?  I would like to restore the 2 to factory settings.  As I understand, from reading "help", videos are NOT in the Photo Stream. 

    1, you can't at the moment, though with iOS 5 in the Autumn, from http://www.apple.com/ios/ios5/features.html#photos :
    Even organize your photos in albums — right on your device
    2, by removing it from you synced from and re-syncing. Only photos taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad (either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view)
    3, the location of the photos that you synced to the iPad should be listed on the iPad's Photos tab when connected to your computer's iTunes.
    4, you can copy the photos from your iPad to your computer : http://support.apple.com/kb/HT4083 . You should also be able to delete them from the iPad as part of the transfer process to your computer, and it's then your choice whether to add them to your sync photo list so as to copy them back to the iPad. Copying them to your computer would allow you to organise them into folders and therefore be able to sync them back into separate albums.
    5, I don't use Dropbox either. There are some third-party browser apps in the iTunes App Store that allow you to download pages so that you can view them when offline e.g. Atomic Web (the whole page is saved within Atomic Web, it doesn't place a photo into the Photos app)
    6, deleting content should help. If you remove an app from your iPad then you also remove the content that it's got on the iPad - so if you then decide to reinstall it back onto the iPad then you will need to manually add back any content that you want in it. None of the Apple built-in apps (including Photos) can be removed from the iPad

  • HT203167 I lost all content on my laptop and had to revert to original settings - how do I get my music from the Ipod to the computer?

    I lost all content on my laptop and had to revert to original settings - how do I get my music from the Ipod to the computer?

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping.  Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
    In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    Would you mind telling me which anti-virus package you use? It may be that it is disturbing iTunes when it tries to write out the fresh database, as it does after almost any activity with your library. I'm noticing more of this type of problem than usual and trying to see if there is any pattern. It may help to prevent a repeat of the problem if you look at the advanced options for your AV package and see if you can find a way to exclude the iTunes folder from any real-time scanning process.
    tt2

  • How can i get my pictures from the cloud if deleted from my Iphone

    how can i get my pictures from the cloud if deleted from my Iphone?

    Restore a backup of your phone that was made while the photos were still on it.  It should include your camera roll photos.  This explains how to restore an iCloud backup: iCloud: Restore your iOS device from iCloud.

  • Exclude a version from the calculation

    Hello,
    In our model we have a version used uniquely to upload data. When the system starts to calculate, it includes this version.  We have tried to lock the version,but it still included in the calculation.
    We would like to know if is possible to exclude this version from the calculation in order to optimize the calculation.
    Thanks in advance,
    Best regards

    First of all, thanks for your responses.
    We would like to develop option 1 from Michaels' solutions, because we have too much LineItems (about 2000) for the option two. So we think, option 1 will be easier.
    The version we are going to exclude is "Initial Charge". Are you suggesting we should make next rule?
           Function CellValue
              RestrictDimension("Versions","Initial Charge")
              CellValue=0
          End Function
    In case of  excluding a single period from that version, next rule would be correct?
          Function CellValue
             RestrictDimension("Versions","Initial Charge")
             RestrictDimension("Periods","January")
             CellValue=0
          End Function
    Thanks again
    Best regards!

  • Accessibility, exclude UI elements from the Tab-chain

    Hi,
    I have a complex UI which is very uncomfortable to access with the Tab key when using sap-accesssibility=true parameter. The main problem are the many transparent containers, which are necessary to create the refined composition of the UI. They get focused when the Tab key is pressed and this is completely useless. I there a way to exclude UI elements from the Tab-chain?
    Best regards,
    Krasimir

    Hi,
    I have same prolem here.
    In my UI I am using mastercolumn for expand /collapse functionality in parent - child node .
    The problem is the keyboard tab-chain is skipping the master column which makes it a accessibility issue.
    Is there any way we can include/exclude UI elements from tab chain.
    My NWDS version is 7.0.10.

  • How do I recover Apps Data from the iCloud on iPhone 4S with IOS 6.1?

    How do I recover Apps Data from the iCloud on iPhone 4S with IOS 6.1?

    You would have to restore to your entire iCloud backup, if you have one.  (The backup includes app data.)  Restoring to an iCloud backup has to be done in the initial setup process.  If you have any data on your phone now that is not in the backup that you want to save you'll need to do that first.  Then go to Settings>General>Reset and tap Erase All Content and Settings.  You will then go through the setup screens as you did when the phone was new. When given the option, choose Restore from iCloud Backup.  Be sure you are connected to wifi and your charger as this will take some time to finish.

  • How to extract any picture (frame) from the video file

    I am writing an application that is going to show the grid of tiles. Each tile should have picture that is frame from some particular video.
    Basically something similar to Photos or Videos - standard Windows Phone app.
    The question is how can i extract any picture from the video to put it as picture of the tile or button?

    I pinged you offline.
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • How to delete 100+ released requests from the import queue?

    Hello
    How to delete 100+ released requests from the import queue?
    One by one or there is more convinient way?
    Thanks

    To delete multiple non-imported transport requests, you do the following while in the import queue on STMS:
    1) Highlight the status field of the import queue.
    2) Sort the import queue by the status.
    3) Put your cursor on the first non-imported transport, right-click, and click on Select Block.
    4) Scroll down and put your cursor on the last non-imported transport, right-click and click on Select Block. This will highlight all requests from the first one selection to the last one selected.
    5) Go to menu option Request > Delete.
    If all of the requests in the import queue haven't been imported (no imported, including failed import, requests), you can jump to Steps 3-5.

  • Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

    Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
    Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

    The Oracle documentation has a good overview of the options available
    Generating XML Data from the Database
    Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
    You can also find some information in XML DB FAQ

  • How can I get all photos from the camera roll onto the photo stream so they will share between iphone and ipad?

    How can I get all photos from the camera roll, and all new pictures taken, to get on the photostream so they can share between iphone and ipad?

    When turning PhotoStream on with photos available in the Camera Roll, only photos captured by the iPhone or saved on the iPhone are placed in the PhotoStream.
    For all photos that were in the Camera Roll prior to turning PhotoStream on, import the photos with your computer and add the photos to your PhotoStream on your computer.

Maybe you are looking for