NX to DVD Pla

Hey there, can any one help me?
I have a JVC TV and DVD player setup, now is it possible to connect the DVD player to my external Audigy 2 NX external soundcard and utilise my Inspire T7900 speakers?
Hope somebody can be of help
- J

The Audigy 2 NX cannot decode from external sources, so if you connect your DVD player to it, it cannot decode this sound to output to your speakers.
Cat

Similar Messages

Severe problem with installing and starting Audio-DVD Pla

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Use SB Live External to play sound from DVD pla

I have tried to connect a cable from my DVD player, phono connection I think it is called, and to a SB Li've External card with a minijack to the "line in".
But I get no sound, have tried options and so on, without any result.
What is wrong? Please help

Does anybody have any idea?

Using Sound Blaster Live! 5.1 as a decoder for an external DVD-pla

Can the Sound Blaster Li've! 5. soundcard be used as a dolby digital decoder for an external DVD-player? The way I was thinking to do this is to use an RCA to 3.5 mm audiocord from the DVD-player and plug it into the soundcards line-in. Will it decode the dolby digital signal and pass it to the speakers?

the line in (2.0 channel) can never decode a dobly digital signal you need an coaxical or optical cable to pass it trouch the soundcard and listen with you speakers, and btw and audigy li've 5. cant support digital input you need a newer soundcard like a audigy 2, 4 or xfi with the external dri've bay

Connecting Audigy2 ZS Plat Pro to dvd pla

I have the Audigy 2 ZS Plat. Pro sound system for my computer and just recently bought a Samsung Blue Ray dvd player (BD-P200) Is it possible to connect my new DVD player to my computer surround sound system?
Or do i need a Decoder ?

I fixed it; all I did was roll back the driver. To do that go to hardware manage select the sound card and click properties then it is under drivers. I then went back and reinstalled the newest update from creative (not the beta)

No sound from DVD pla

Does anybody have the cure for this problem: - Since installing SOUNDBLASTER EXTERNAL sound card I can no longer hear the sound track from my DVD player

Interisting case, it must be a compatibility issue.
Test it with other DVD movies, run it with different software, i.e QuickPlay, Windows Media Player, VLC etc.
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Mac mini ejecting every CD/DVD in insert

I have a Superdrive, and it won't take any disc I inisert, CD or DVD. After trying to read it, it ejects it, no matter what application I have opne (iTunes, DVD plaer, iDVD, etc). Even with no apps. open, the discs just ejects. I was buring some iDVDs no problem, then all of a suddden this started happeneing.
Anyone have a clue what is going on?

Well, I went to an Apple retail store this morning, and waited forver for a "genius" to help me. Most of the people in front of me ahd silly iPod issue...one lady was waiting there 'cuz her iPod didnt' boot..I told her (in line) "press & hold menu and play buttons"...it worked, she was psyched, didn't have to wait for a "genious".
Anyway, I knew my problem, laser burnt out, and all I wanted for them was to order me a new one. After 1 hour waiting, I decided the heck with it, and walked out. I decided to get a new Superdrive (8x) from otherworldcomputing.com, and install myself (I installed a 1 gig DIMM myself already).
Upside -> I wait 1 day, install it, and don't have to wait and driver 60 miles to the Apple store.
Downside -> I had to pay for the new Superdrive, and didn't take advantage of my 1-year warranty. There was just too long a line at the Apple store....some of the issues folks wanted help with...I got very fustrated.
Anyway, just a rant...
-Brian

Wasting DVD's

Hello all,
I am a fairly new user to Pre 11 and having problems burning the final movie to a DVD. So far I have wasted 2 DVD's in the process and am very frustrated that this program simply does not cooperate.
I shot video with my Nikon P7800 at the 720p 30 fps setting and dropped that into a project. Added Title and ending credits, so I ended up with about 50 minutes. Everytime I try to burn the DVD direct from Pre, it says the program stopped working and needs to close (Win7pro, 8gb ram, quad core, 2 x 500gb HD's)
So I saved to file TS folder and that burn played on the DVD plaer, but froze at the 18 minute mark. Then i saved to mpeg and burned with Windows burner, now the video is good, but the audio plays for 3 seconds and silent for 3 seconds. What am I doing wrong?
It's not the DVD's I am wasting, but compiling and burning takes up a lot of my time, which is the source of my frustration. All this time, getting a good looking preview and bammo, no joy on being able to veiw it on the big screen.
Any help?
Jimmy Bru

Jimmy,
Going back to your combined Project, what is the total Duration of the Timeline?
The reason that I ask is that the determining factor of quality (if all was done correctly in the Project setup, and any Image editing for a SlideShow) is the Bit-Rate of the Transcoding to author a DVD-Video.
PrE uses a 2-Pass Encoding, where the first pass is a survey of the whole Timeline, and the second pass is the actual Encoding run, taking that survey (first pass) into account, to get the highest Bit-Rate, per the settings, and size of DVD disc. If max. Quality can be achieved for all footage, then it's as good as it gets. However, if the Duration is long enough, then PrE tries to apply a higher Bit-Rate for footage, where there is motion, but then drops the Bit-Rate down, for static passages, to fit everything onto the disc. Titles (unless animated) are static, so their Bit-Rate can be lower, and that might show up.
If your total Duration is around 1 hour, then you should have the highest possible Bit-Rate (around 8MP/s) for everything. If the Duration is much over 90 mins., then something has to give (lower Bit-Rate), to fit that Timeline onto a blank disc.
Good luck, and please let us know about the Duration of the combined Project.
Hunt

Recording from DVD-Audio Pla

How?
X-Fi Soundcard
GreetingsMessage Edited by zickzack on 09-24-2005 0:22 PM

Can you be more specific? What are you trying to record?
If you mean you want to record the audio you're playing from DVDs (audio DVDs) then I'm afraid you'll have to look elsewhere for that type of information, as that would involve breaking copyright laws (and encryptions depending on what you're playing).
Cat

DVD-Audio Pla

Hi?I have a XtremeMusic card, with the latest drivers installed (and yes I also have the Digiatla i/o problem after rebbot). The problem is I installed the DVD-Audio player. The player plays but there is no sound, if I use the mouse to move along the track I then get sound until I stop moving the mouse. I can play the same Audio-dvd in PowerDVD v7. The dvd is one of the new released REM cds, that include a dvd of the cd in 5. surround sound. So what is the problem with the Creative DVD-Audio player, if on the same hardware other programs can play the audio. I usually don't like having too many programs installed that offer the same feautes, but i just wanted to try out the player, and it should work. I am getting annoyed at the poor quality of the software, I keep on emailing support and all I seem to get are automatted responses with no solutions to my problems.

Are you using digital speakers? If so, then you will need to switch to the analog outputs for a true DVD-Audio output. The DVD-Audio standard does not allow for digital output and forces analog.
Your PowerDVD may be picking up a Dolby Digital or other such encoded copy of the music. Many hybrid DVD-Audio disks contain both. True DVD-Audio is not compressed at all and is 6-8 channels of unencoded audio.

Quick question about Creative DVD audio pla

Hi all,
I loaded all the drivers and software that came with my Sound Blaster Audigy 2 ZS. The kit came with a DVD audio sampler disc. When I put the DVD audio disc into my computer DVD ROM dri've, it automatically navigates to the Creative Audio DVD player. The only problem is that the "play" button is greyed out. It will not play the disc. It show in the staus window that the sampler disc is there and ready to go. I have tried every button but can not get to play.
Any ideas what I am doing wrong?
Thanks,

Now when I launch the DVD audio player and try to click on a button it just freezes up and have to end the program in task manager

Sound Blaster Audigy 2: No sound in DVD or Windows Media Pla

Getting around in Windows XP I get all the sounds in the book, whether it's starting up or shutting down, critical "bongs", icon confirmation "clicking", all the sounds are there. Where I do not get sound is While attempting to watch a DVD or when I try to play any music file in Windows Media Player. The DVD video will play, there's just no sound, and with Media Player I get this error message:? "Windows Media Player cannot play the file because there is a problem with your sound device."? Again, all the other Windows sounds are there. Anybody have any experience with this one?

I have just installed my Sound Blaster card, and get all of the Windows sounds. I can even play music CDs and movie DVDs on different media players other than Windows Media Player. The sound is also fine when playing games. However, when I try to use Windows Media Player, the CD and DVD plays, but there is no sound. In fact, when Windows Media Player is up and running, there is no Windows sounds or even other sounds when playing games. As soon as I close Windows Media Player, there is sound. I analyzed the configuration settings for both the Sound Blaster card and Windows Media Player, but I cannot see any problems.
Does anyone have a clue?

Skipping / jerky DVD DTS audio on Audigy 2 ZS also crash when using Media Source DVD-A pla

I've been having a difficult time playing 5. DVD audio using my new Audigy 2 ZS card. I have updated drivers from Creative.
When I try to play the DTS track on a DVD-A (e.g. Queen's "A Night at the Opera"), I get choppy skipping sound -- the music sounds good, but it skips and is jerky. The PCM 2-channel stereo on the same disc sounds fine. Dolby Surround on another DVD-A disk (not DTS), "Trey Anastasio" also starts out jerky and skippy, but then seems to "settle down" in the middle of the first track. The Creative Mediasource DVD-A player doesn't work at all on-- as soon as it launches, it crashes and reboots my computer (which suggests to me that it must be some driver conflict issue or something). That problem only happens when playing certain discs -- e.g. the Queen disk and the
DVD-A of Yes' "Fragile."
I have installed on my system Windows Media Player 0, WinDVD 4 (OEM), Nero Showtime and Creative's Media Source DVD-A player.
I am using a brand-new HP Pavilion a730n Windows XP SP2 52Mb RAM.
DVD player is Lite-ON DVD/RW SOHW-832S
Video card is nVidia GeForce 6600
Any suggestions?
Thanks.

ok, I normally use powerdvd 6, now with dts 96/24 decoding pack, and I have the latest patch to version 47 installed.
it is the same again: when using 6 speakers in audio configuration menu, queen dvd plays perfectly, when using spdif output and decoding via zs card, sound is distorted. I noticed that if I activate "show information" in powerdvd, detected sound track changes between "dts 5.0" and "dts 5. 96/24" all the time in spdif mode.
is there a problem with powerdvd AND windvd or the audigy2 zs ?

Problems with connection Creative zen M and DVD-CD pla

Hi,
I have problems whem i connect my zen to the DVD player. I've connected zen with a cable going from the headphones to the audio line in (red and white) at the back of the DVD system. I get sound but the problem is that my zen automaticly switch to the FM radio mode, when it should be playing from the music libary. This happens by 70% of the numbers. How can I deal with this problem?
Problem 2 is that I hear a strong noise when I connect my zen to the DVD player. It's al low sound which comes back in all the 5 boxes en sounds like a bee...
Problem 3 is that I can't get the full volume on the DVD system. Even when zen is max on 25 i've to put the DVD system also max before a normal sound is coming to me...
Can anybody please help me? Thanks!

Hi there,
. The reason the ZVM is switching to fm radio is because the headphone jack also supports a wired remote that controls some of the ZVM functions there will be some sort of back feed from your DVD head unit to the ZVM causing this to happen.
2. The headphone jack does carry a bit of noise when used with line in applications and compared to the line out function of the ZVM is muffled and lacks power(this also could be noise in your DVD unit).
3. Same as above(2) the A/V out function has a set volume and is louder and much clearer than the headphone out jack.( The line out is the A/V out function of the ZVM found in the supplied adaptor that plugs into the bottom of the ZVM)
To overcome this problem simply use the line out function of the ZVM either through the dongle and an A/V cable or get an after market cable to suit and that should solve your problems with this type application.
Let us know how you go with it
Heres the bits
http://us.creative.com/products/prod...7&product=4484
Or you can search for a cable that plugs straight into the bottom of the ZVM and has rca's on the other end, you should be able to find then via a search here or through epizenter.net in one of the threads
Message Edited by AussieBoy on 08-0-2006 09:50 PM

My optical drive went out. what external dvd drive will work?

My optical drive is going out. I went to Apple and they suggested I buy an external dvd drive instead of paying $150+ to replace the drive on my MacBook Pro. I bought the Samsung Ultra Portable Slim External DVD drive and it took about 15+minutes for my Mac to even acknowledge it. Then it read the dvd and then my Mac told me it was consuming too much power through the USB and disconnected it. And I could not get it to work after that. I called Apple Support to find out what drives will work and they told me their USB Superdrive. I told them I read it won't work with Mac's that already have an optical drive installed, they looked it up and told me I'm correct. When I asked them what other drives they suggest, they told me they had no idea and I should google it.
Super frustrated.

Virtually ant external drive should work with your MBP. I would suggest one with external power so that you do not run into the same problem.
You might try a USB 'Y' connector with the one that you have purchased. That may allow sufficient power for it to operate. This is an example:
http://www.newegg.com/Product/Product.aspx?Item=N82E16817998124&nm_mc=KNC-Google Adwords&cm_mmc=KNC-GoogleAdwords-_-pla-_-SSD%2f+HDD+Accessory-_-N82E16817998124& gclid=CPSg2Y7EgrcCFccx4AodvycAyg
Ciao.

NX to DVD Pla

Similar Messages

Maybe you are looking for