NX6600GT-TD128E Lost HDTV/Video Out Connecting Cable

I own this card NX6600GT-TD128E
http://www.msi.com.tw/program/products/vga/vga/pro_vga_detail.php?UID=621
Is there anyway to get a replacement HDTV/Video out Cable? I misplaced mine and I'd love to get another one.... Figured I'd ask.

I have just purchased the same card
and i think if you look on ebay you might find the cables with enough patience
wie7777 ebay user often has MSI cables odd parts etc
im actually using just an s-video cable to the (66cm)TV and have 5.1 soundblaster card on the system im using at the moment (k7n2 delta sempron etc)
including a 15" 600w clarion dual voice coil subwoofer & amp and 4 medium sized speakers sounds great, shakes my loungeroom
Im just about to setup my
MSI k8n SLI platinum /7.1 soundblaster onboard should sound even better
MSI 6600GT 128
geil 512 value ram
250gb Maxtor harddrive
just about to purchase a 3000-3200+ CPU
im looking at getting another identical card to go SLI which would be perfect as you should get a cable with the second one until then i cant help but i will let you's know if i come accross any possibly im not sure where you's are from but here we have
www.tandy.com.au
www.jaycar.com.au
you could try your local video/hifi expert to see if they make or carry anything similar
let me know how you's go as my cable i just noticed looks different to the one pictured at MSI site
GOOD LUCK

Similar Messages

Video out connection bad on MOBO

My video went out when I opened my G4 Titanium display one day. Odd smell and no video. I found the ribbon cable was damaged near the plug on MOBO. One wire was stripped and probably contacted the metal inside. I assume there was damage to the video out somewhere on the MOBO. External display is fine. Short of buying a new cable to test the internal output to diplay is there any way to test this?

Hi, Macnag. For clarity's sake, can we agree that "video out" means the port on the back of your Powerbook to which you connect an external monitor? You say "External display is fine," so I assume there's nothing wrong with your video out. For the same reason, I conclude that there's nothing wrong with the video components on your logic board, and that's good news. You know you need a new LVDS video cable (which feeds the built-in display), because the one you have is damaged. What you may not know is how difficult it is to replace that cable, one end of which is sealed inside the glued-together display assembly. For one man's techniques for opening the display assembly to get at the stuff inside it, see http://mywebpages.comcast.net/macdan/tibook_display.html.

Video Out Connection Problem

am trying to connect my powerbook to a tv, so I bought a video out connector, which connects to the video out port right by the s-video connection and cable internet port. When I connect the piece to my powerbook, the screen flashes to blue, I guess it automatically is detecting the displays, and then returns to normal. When I connect the video line from this connector to the tv, the screen has gray horizontal bars and scribbles in between (kinda like a loose connection I guess?). I have checked the connections, all were tight, have restarted. Also, when I go to the display preferences when this piece is attached, an error report comes up and display preferences are automatically closed. Please help.

Your power supply may have weakened and can no longer produce the amps that are needed to power the system. The newer video card also draws more power as well.
Check and see if you can borrow another power supply to check if that is the problem. One with power outputs similar to mine would be enough to make the check.
A vantec chipset cooler from newegg can be used to replace the bad one on the KT3 motherboard.
Are you using the same power supply with both motherboards?

IPhone4/iOS7/GoodReader/video-out by cable?

Does anybody successfully use the app Goodreader to project pdfs via dock-connector-cable/compound?
I'm considering to buy this app; idea is, to use our companies projector, which offers only vga and compound-in, with my old iPhone4.
Photo-slideshows do work, but pdf would be more handy for my needs...
Any insights?
Better ideas? (iWorks for iOS??)
Thanks in advance!
k.

nobody uses a video-out-cable...?

Tecra A4: How to make TV s-video out connection?

I have cable and i have connected
there is no signal also there is no any option for tv out or s-video in properties - advanced - display

Hi. I've also the same problem. the Svideo port on my Tecra M5 doesn't work. It was working but suddenly it didn't. I've checked everything from Cable to TV and also drivers. Everything is OK and also I've checked with another similar M5 Notebook. Please advise me if you have any idea. BTW, how can I check that the Svideo port is working properly?
Thanks

Intel iMac Component Video Out

Has anyone tried a component video out connection to an HDTV from the Intel iMac? I've read from the ATI website that the new Radeon X1600 card supports component video out with an adapter.
There was never a really good way to do this with previous Mac models.

A little more news about component out from the Intel iMac 20"
The VGA adapter included with my 12" iBook does not fit the mini-dvi port on the iMac. So you need to buy a new adapter from Apple.
Also:
I tried using a VGA-to-component cable with the iBook VGA adapter and a standard television set. The cable is designed to interface a component-out DVD player to a VGA-in BenQ projector. I ran the cable to the component-in jacks on my Sanyo (analog-non HD) television. No go. Tried several resolutions and adapter refresh rates, and got some smeared video, but it made me nervous and I stopped experimenting. Haven't tried this cable with my HDTV for fear of damage.
Basically, the cable was meant to take a video signal from the DVD player to the projector. My experiment was mac to TV.
So sad, oh so sad ;<
Regards,
Gene

IPhone3: only 'Video' out, or stills too?

Never done before, never thought of using my ol' telephone for that, but:
Afaik, the video-out component cable allows to playout 'video' from my iTunes Lib to e.g. a TV or projector.
What about stills? jpg
… craaaazy: What about pdf?
(I know, the limited 480p resolution is far from perfect)
idea behind that:
usually, I use a MacBook connected to some projector to demo a few pics, videos or a short Keynote presentation.
I lately saw some guy using a cable and his shiny, all new iPhone5 for that! (jealous modeON)
… which is in terms of protability stunning!
I know, Keynote isn't supported on my dusty trusty device, I would simply create a pdf, or a collection of jpgs
In use here: an antique iPhone3 + iOS3 …
yes, my sort of steampunk

Rudegar wrote:
… iphone4 … using ios 6 at the time
great.
My set-up, as mentioned above:
iPhone3 + iOS3 ....
any one remembers this configuartion for my problem?

Video Out - Tecra 8000

I have a Tecra 8000 with Windows XP Pro installed.
Everything works beautifully I have updated the BIOS to v9.3 - BUT I can't get the video out connections to work.
I have tried the RCA plug on the back, and also connected the SVGA dongle to the side jack and used the composite video out on that, but no signal seems to come out of either of them.
I have tinkered with the various different BIOS settings, used the Fn+F5 key all to no avail.
I have read in the forum here that others have the same problem, so I'm adding a plea for help with this one too. Can I ask, has ANYONE managed to actually get a composite video signal out of their Tecra?

Hi Peter
If your Tecra is preinstalled with Toshiba Recovery CD all drivers and tools should work properly. In this case there are, in my opinion, two possible reasons why this not works. Either is notebook the cause for this issue or there is some problem with the TV and TV setting.
Using FN+F5 key combination you can switch to external device. It will be interesting to know if this works properly with external monitor. It is not the same port but the tool is the same. You can also try to connect your notebook to another TV. It is sometimes not easy to say what the problem can be. If there is no way to have some success you need some professional help. Maybe the service partner can make a short check of composite video out port.

IPad video out problem

Dear forum users,
I have an iPad with the latest iOS software update, and I am trying to link it with an ACER K11 pico projector (which they advertise to work with iPad).
I am using the Apple video out vga cable, as well as a compatible app like "keynote".
Unfortunately, all I get is a "no signal" message on the projector. The projector works well with other video sources.
I tried it with my iPhone 4 and got the same result.
Any idea what could be the problem?
Many thanks
Macphi

Just checking: Did you actually run a presentation? You won't get anything on an external display until you actually start a presentation. VGA out is limited to apps that explicitly support it and even then only in some situations (e.g. the Photos app will only display something once you start a slideshow).

Another No Video Out!!!

Ok, got updater 1.1.1 new 60g vid no video out. Cable is right, plugged in, tv out on or ask (tried both), not pal out. Tried music vids, tv clip from itunes, nada.. : ( I think it's no good. Could anyone have another ideas please...

I have the same problem. Checked everything. Ipod is set to tv on, ntsc, everything is plugged in, even switched yellow and red cables because I heard that might help. Still nothing. Tried changin tv to 3 and 4 still nothing.

PB stuck in S-video out mode despite no s-video cable connected!

Greetings,
Earlier today I attached a TV to my computer's s-video out to watch some video, afterwards I disconnected the cable and went to use my computer as I would ordinarily. Unfortunately now my Powerbook still shows a TV as being connected despite the fact that there is absolutely nothing connected to the s-video out port.
So far I've tried reseting the PRAM a couple of times, repairing permissions, and clearing the system cache (amongst other cache items). Nothing seems to work. When in the display control panel I still see a 'phantom tv' connected and still have the option of arranging the displays.
Has anyone else encountered this problem and been able to resolve it without resorting to a visit to Apple Repair?
Thanks in advance!
-Scott Stevenson
1st Gen. Powerbook G4 17 Mac OS X (10.4.3)

Thanks a_brody for trying to be helpful but in fact my primary display never was selected as the television, so it never needed changing back. All that is occurring is that my mouse (and occassionally windows that I'm moving around) will disappear into the 'phantom' secondary screen. Unless someone else might be able to suggest some other ideas about resolving this issue, I suspect that I'll have to pay a visit to an Apple authorized service center before my Apple-Care coverage expires this coming year.
Happy Holidays!
-Scott
1st Gen. Powerbook G4 17 Mac OS X (10.4.3)

Zen Vision M Video Out to TV problem (with proprietary cable!)

I am the original owner of a 60 GB Zen Vision M that works perfectly. I have purchased the proprietary A/V cable for the unit when I purchased it but never had occasion to use it. I now have a flat panel display on which I should like to display video files. The information screen says it has version .2.02 (I assume that?s firmware.)
Customer support for the product is no longer available. I have set the video out to ?auto NTSC? I have wonderful sound but nothing shows on the screen from the yellow RCA video plug that comes out of the same white cable from Creative. UI have connected it to several different sets, two of which are older tube sets. No luck.
Any help here?
Thanks.

Anyone tried holding down power and pressing the reset at the same time. Then after hit clean up from the recovery menu. I was told to do that but i havent tried test it out on tv output yet.
Warning: it clears all the settings in your zen player. (Custom eq, menus, all zen settings)

I need to connect I-Mac G5 to HDMI TV, I think I need this: Video Out: mini-VGA (mirror only) to HDMI, where can I buy? Apple Bluewater no help.

I need to connect I-Mac G5 to HDMI TV, I think I need this: Video Out: mini-VGA (mirror only) to HDMI, where can I buy? Apple Bluewater no help.

VGA is an analog signal HDMI is digital. A simple cable would not work you would need something that converts the analog signal to digital.
A search of VGA to HDMI turned up a few possibilities but nothing specific. In any case the picture on the TV will not be very good given the source.
You should check to see if the TV has a VGA input. Some TV's have a computer connection port and this is usually VGA.
Message was edited by: Frank Caggiano - I'll ask the hosts to move this to the proper community.

How do I get my NX6600GT-TD128E (PCIE) video card installed on a K8N NEO4-F Mb ?

I have received two new NX6600GT-TD128E (MS-8983) vdeo cards to install on my new K8N NEO4-F (MS-7125) motherboard flashed with BIOS ver 1.B.
First video card turned out to be bad. The replacement card allows view of bios screens and post screen, but when Windows XP (pro) starts up, the video goes blank and Windows XP locks up dead.
Any suggestions as to what I need to do to get the video card up and running?

Quote from: macprmgr on 19-March-06, 11:23:16
I have received two new NX6600GT-TD128E (MS-8983) vdeo cards to install on my new K8N NEO4-F (MS-7125) motherboard flashed with BIOS ver 1.B.
First video card turned out to be bad. The replacement card allows view of bios screens and post screen, but when Windows XP (pro) starts up, the video goes blank and Windows XP locks up dead.
Any suggestions as to what I need to do to get the video card up and running?
Can you tell us what other parts you have
Please read and comply with the Forum Rules.
I know you want the problem fixed but its hard to help if we don't know the basic's. Check the rules you will find they are a good place to start and for you to help yourself as well as others have an idea to help you

How do i get video out to connect to aprojector

How do I get video out of my Ipod touch(4th gen) to connect to my projector. I have the correct cable and the projector work fine when connected to my laptop, mirrors the creen correctly But I cannot get an output from my Ipod.Cheers

hi
I think I have found the app, I was not seeing the obvious, so I can now play videos on the Ipod itself. With regards the cable it is a Dexim unit which plugs into the long Ipod socket on the base.From that unit there is a cable terminated with jackplugs.One end into the dexim unit another into the projector. As I said it worked fine on a 2nd generation, I just played the video on the 2G Ipod and it came thru onto the projector. Hence my thought that it was a setting and/or app on the 4thG Ipod.
Again many thanks for all your help, at least it is improving my knowledge of Ipod
Cheers
PS started with the ipod download guide but the problem isnt addressed hence my plea on this forum.
PPS I've emailed Dexim to see if just in case the unit I have isn't compatible with 4thg Ipod for some reason

NX6600GT-TD128E Lost HDTV/Video Out Connecting Cable

Similar Messages

Maybe you are looking for