NX6600GT TD128E SLI (2 Different Looking Cards)

Ive just purchased a 2nd NX6600GT TD128E. The problem is it looks completly different to the one i have at the moment.
http://msicomputer.co.uk/products.aspx?product_id=703544
The 6600GT thats in my PC is exactly as its shown on the Site. But my new 6600GT is Longer and has a different Heatsink,
Its Bigger with Black plastic on top and has "6600GT" witten at the top and "Game With MSI at The bottom".
However it has the NX6600GT TD128E on the back.
When ordering the card it was starated exactly as my one in my PC but no picture. Will this cause problems or
as they are from the same model it will work ok.
Many Thanks

they make 2
http://www.msi.com.tw/program/products/vga/vga/pro_vga_detail.php?UID=623
http://www.msi.com.tw/program/products/vga/vga/pro_vga_detail.php?UID=624
one has dual dvi one has a single
cannot see much else different in specs
as to running them in sli
from what ive seen as drivers get better it works
ive seen articles were cards were by differnt makers in sli now
so at least in theory you should be ok

Similar Messages

NX6600GT-TD128E SLI Bluescreen

Hi Guys!
I got a real problem with my Sli System as long as I stay in Windows i can do whatever i want , but if i start a game like
Heroes of Might and Magic 5, Half life 2, Oblivion, Warcraft3 and so on I cant just play 10-30min and then BAM Bluescreen
caused by nv4_disp.dll.
I´ve tried almost everything:
New Drivers : Almost 30 tested most of them i couldn´t activate Sli Multi GPU some of them I could but wouldn´t work either
Direct X: tested the old and the updated one. DxDiag showed nothing.
Reinstall Windows: At first I had a Cracked Windows Version now using a original Windows Xp Prof. SP2
Cards: I checked the Cards they are not getting to hot and are in their Slots
MY System
Asrock 939SLI-eSata2 (Bios 1.30)
Athlon x2 3800+ @ 2x 2Ghz
1GB DDR Dual Channel Elixir
Hitachi 250Gig Sata2
Codegen 400W 3V/20A 5V/22A 12v/16A
2x NX6600GT-TD128E SLI
So i hope you Guys can help me...
With Regards
Zaraffa

try with better PSU that Codegen 400W 3V/20A 5V/22A 12v/16A is crap brand and not enought powerfull also.
other parts also look suspiciol like the cheap "1GB DDR Dual Channel Elixir" maybe its memory instability problem also, Elexir is cheaper and values parts often defectives, however they isnt designed for Dual CH(thats no mean it cannot work, but they can make errors..) did you overclock your machine at all? did you passed memtest? but that question is for future. your mobo is Asrock 939SLI-eSata2 mhh will safe the comments...
try your PC with Good Brand PSU 1st dude. read this: https://forum-en.msi.com/index.php?topic=76923.0
2nd reason for problem is your memory suspected..
think you are posting at wrong forum couse im sure problem isnt it in your MSI VGA. Which Drivers you are tried?

MSI NX6600GT-TD128E SLI Help

Hi all
I have two Problems.
1. I can’t OverClock my MSI NX6600GT Cards in SLI
2. If I run a fast game like Colin McRae Rally 04 or Colin McRae Rally 05. After 3 -5 min of playing the game, The Pc screen will slit in two & the bottom half of the screen will go all funny. And then the PC will Lockup.
Any help.
PS. I'm not getting very good score on AquaMark3 only 57,000 But was getting 63,000.
Amd winchester 939 3200+
1Gig of Kingston pc3200 512M
Asus A8N-SLI
MSI NX6600GT-TD128E X 2 (PCI-Express)
600w power supply
1xLED fans
2xExhaust fans

If the game is using a profile that uses SFR the screen is split in two horizontally ... pls see below
Single frame rendering
Single frame rendering (SFR) mode in NVIDIA SLI works similarly to Metabyte’s PGC in the sense that the graphics card splits the workload horizontally across the screen. One card takes the upper portion while the second card takes the lower segment. The frame buffer data is then combined and sent to the monitor.
It’s important to note that SFR doesn’t necessarily split the screen directly down the middle; in some scenes the lower portion of the screen may be more complex than the upper portion, or vice versa. NVIDIA has developed custom load-balancing algorithms that are designed to take this into account, and split the screen appropriately – if one GPU takes longer to render, no problem, the driver just gives that GPU less work to do.
Alternate frame rendering
Up to now, ATI’s Rage Fury MAXX was arguably the most well known card to take advantage of alternate frame rendering. Rather than splitting the work up every frame like in SLI, with AFR, each graphics core handled alternate frames. Graphics core one would handle everything in frame 1, while graphics core two would then handle frame number 2. Each chip renders every other frame instead of alternating lines in the same frame, as 3dfx had done with scan-line interleave. If one GPU doesn’t finish drawing its frame, the remainder is pushed to the second GPU. This is the same concept NVIDIA has employed for their SLI technology, only we’re dealing with two distinct graphics cards, rather than two graphics cards on the same core.
The most well known downside with AFR has been perceived “lag” that may be felt by some twitch players in very fast-paced first-person shooters such as Quake 1 or Quake 3. The argument is that user inputs, such as a quick flick of your wrist to nail your opponent in mid-air with your rail gun may feel lagged. In theory, this could happen when the second AFR scenario we described occurs – GPU1 doesn’t finish its frame and the remainder is passed to GPU2 – there could be a lag between the key being pressed and the output being shown on the screen. Ironically enough, NVIDIA used this same argument to tout their GeForce 256 over Rage Fury MAXX five years ago.
We played a little Half-Life 2 (which uses AFR by default) to test out this theory, but didn’t perceive any additional lag during our “testing” sessions. Buffering kicks in when data is split between GPUs, and it appears to work well. Also keep in mind that today’s shooters aren’t as fast-paced as they were a few years ago.
Currently, AFR is NVIDIA’s preferred mode for SLI. In general, AFR uses less communications overhead (as no communications overhead between GPUs is used as long as frames are contained to each GPU), allowing it to scale better than SFR. NVIDIA also says that applications with heavy vertex loads benefit less from SFR.

GTX 980 SLI , two different version cards.

I have two MSI GTX 980 gaming 4G cards ,they are different in memory. hynix and samsung. But the problem is that they are not performing the same. In the screenshot I attached you can clearly see that one working about 10 Celcius degrees higher than the other, with lower VDDC and a bit lower GPU clock. You can see I have overclocked the cards but this happen in stock clocks also. Is the card faulty? I need someone to help me with some information about this, because I bought them from amazon and I still have the 30 days return policy available to replace it.

Hi,
It's normal that 1 card is hotter than the other in SLI. I don't have to guess but the hotter one is in very first PCIe x16 slot.
You could try switching them around and see if temps slightly decrease, or increase the fan curve speed so both stay lower.
To be honest, for SLI it's been recommended to use cards that have blower heatsink/fan (like reference card), as with those open heatsinks/fans, they blow hot air on the other.
Also 72C for the card being in SLI and being the hottest of those, is very good. My old GTX770 was hitting 70C on FurMark and other stress tests without being in SLI.

NX6600GT-TD128E + NX6600GT-VDT128 in SLI mode

Hi, i got a cuestion for you my friends.
My PC originaly have one video card model NX6600GT-TD128E first model, it has been a good player in this gaming world, but i want to upgrade to SLI. I found on EBAY an option wich is the same card but VIVO edition, model NX6600GT-VDT128 first model. I want to know if i can use it on SLI configurtation with my existing card. My mobo is a MSI K8N Neo4 Platinum SLI. If there`s a problem with this particular configuration, Can i use another 6600GT but from different vendor?
Thanks, i will apreciate your comments

NickNitrux,
With the latest ForceWare Drivers, you can even use two Vid Cards from different companies in SLI as long as they are the same chipset.
Always glad to help.
Take Care,
Richard
P.S. Do not forget to report back when you get it.

How do I get my NX6600GT-TD128E (PCIE) video card installed on a K8N NEO4-F Mb ?

I have received two new NX6600GT-TD128E (MS-8983) vdeo cards to install on my new K8N NEO4-F (MS-7125) motherboard flashed with BIOS ver 1.B.
First video card turned out to be bad. The replacement card allows view of bios screens and post screen, but when Windows XP (pro) starts up, the video goes blank and Windows XP locks up dead.
Any suggestions as to what I need to do to get the video card up and running?

Quote from: macprmgr on 19-March-06, 11:23:16
I have received two new NX6600GT-TD128E (MS-8983) vdeo cards to install on my new K8N NEO4-F (MS-7125) motherboard flashed with BIOS ver 1.B.
First video card turned out to be bad. The replacement card allows view of bios screens and post screen, but when Windows XP (pro) starts up, the video goes blank and Windows XP locks up dead.
Any suggestions as to what I need to do to get the video card up and running?
Can you tell us what other parts you have
Please read and comply with the Forum Rules.
I know you want the problem fixed but its hard to help if we don't know the basic's. Check the rules you will find they are a good place to start and for you to help yourself as well as others have an idea to help you

NX6600GT-TD128E Lost HDTV/Video Out Connecting Cable

I own this card NX6600GT-TD128E
http://www.msi.com.tw/program/products/vga/vga/pro_vga_detail.php?UID=621
Is there anyway to get a replacement HDTV/Video out Cable? I misplaced mine and I'd love to get another one.... Figured I'd ask.

I have just purchased the same card
and i think if you look on ebay you might find the cables with enough patience
wie7777 ebay user often has MSI cables odd parts etc
im actually using just an s-video cable to the (66cm)TV and have 5.1 soundblaster card on the system im using at the moment (k7n2 delta sempron etc)
including a 15" 600w clarion dual voice coil subwoofer & amp and 4 medium sized speakers sounds great, shakes my loungeroom
Im just about to setup my
MSI k8n SLI platinum /7.1 soundblaster onboard should sound even better
MSI 6600GT 128
geil 512 value ram
250gb Maxtor harddrive
just about to purchase a 3000-3200+ CPU
im looking at getting another identical card to go SLI which would be perfect as you should get a cable with the second one until then i cant help but i will let you's know if i come accross any possibly im not sure where you's are from but here we have
www.tandy.com.au
www.jaycar.com.au
you could try your local video/hifi expert to see if they make or carry anything similar
let me know how you's go as my cable i just noticed looks different to the one pictured at MSI site
GOOD LUCK

Is my NX6600GT-TD128E faulty?

I bought the MSI NX6600GT-TD128E in February of 2005. I haven't touched it since I first put it into my computer and it has been working fine for the past two years.
For the past month or so whenever I run something that uses accelerated graphics there is a ton of corruption on the screen. I have tried dozens of different configurations and tried it on multiple clean installs of Windows Vista, Ubuntu Edgy Eft, and Ubuntu Feisty Fawn (the last two are Linux distributions). Obvious I doubt it is a software problem if it just randomly stopped working and I tested it on multiple configurations.
I don't know if there is anything I can do about it and I was wondering if I should (or can) get it fixed under warranty? If I do, does it usually take a long time and how much will it cost?
I have tons of screenshots depicting the problem which I will attach.

Quote from: compotatoj on 16-March-07, 14:22:15
Oh my gosh! You are right! Wow you are so smart. The fan popped off halfway from the heat sink!
Quote from: compotatoj on 16-March-07, 14:36:13
Is this under warranty? I can't believe it is still running!
well dunno about the warrantly since its 2 year old and hmm looks like cooler is heavy damaged.
you can ask your reseller about warantly or to How to contact MSI. for more information.
easy way to fix it just get and install after market VGA cooler. (NOTE: make sure it will be compatible with your VGA model).

NX6600GT TD128E - Freeze then go on

Hello everyone,
I’ve these card for a few years now and always had the same trouble, when I’m playing game (and only when playing often on Counter Strike Source, Guitar Hero III,…), sometimes and randomly, my computer freeze a bit (one or two second), and then go on.
I don’t understand why, I’ve upgraded my motherboard bios; all my drivers are up to date… Tried with both nvidia and msi driver (which one is supposed to be better, for now I’m running with the last nvidia.)
My temperatures seem usual around 44°c when idle, and 65°c when playing. (With expertool).
I’ve never take care of this trouble because, I was at school and on the boarding house with my laptop so, I never really had the time to play.
There is my configuration:
ASUS A8N-SLI
MSI NX6600GT TD128E (Bios version : 5.43.02.69.00)
AMD Ahtlon 64 3200+ (never goes above 55°c)
Windows XP SP3
1024Mo
Audigy 4
Maybe upgrading my bios ?
Or make some advanced test ? But which one ?
Thanks for your concern.

I think you should try with decent PSU.
That PSU used is cheap noname and low quality.
See here: https://forum-en.msi.com/index.php?topic=112039.msg836246#msg836246
And here:
>>> PSU's---2 x 12v---The Dual Rail Myth <<<
>>> Is your problem caused by your PSU? <<<
Other tips:
Also do a fresh OS installation.
Test VGA in another machine.

NX6600GT-TD128E and Loose Heatsink

I just bought a NX6600GT-TD128E for a new build and it has the same loose heatsink problem, mentioned in earlier threads. Does anyone know if MSI has addressed this issue? It seems to be a design problem, to me. It seems pointless to have Newegg swap the card, unless MSI has fixed the problem. Since I like the package, I will probably keep the card and just replace the heatsink with an aftermarket cooler. Here is what I see wrong with the heatsink:
Springs in attach pins do not have enough tension to hold the heatsink tightly against the GPU & memory
Any warping in heatsink or card makes the problem worse.
Mounting in a tower case (which most of us do) will make the problem worse (Gravity!)
Someone else mentioned the heatsink attached with thermal pads. Mine just appears to be thermal compound, no adhesive, no pads.
I may do a little experiment with mine. Mount it as is and checks temps and performance. Then try a couple of aftermarket coolers and again check temps and performance.
Other thoughts? Wish me luck

Ok I see now. That looks nice in the pic but I can see where that may be a problem. I believe as long as the GPU is making good contact, the memory is not really an issue unless you intend to overclock. I have had issues with many other heatsink designs, and I usually replaced them with my own fasteners from a local hobbyshop or Ace hardware. I have been able to find plastic or PVC nuts, bolts and washers to suit my needs in most cases. It takes a little searching and is time consuming. I had a Ti4200 with the TopTech Cooler that I have had to do the same thing with. I then found that using an aftermarket cooler was the best soution anyway. I did a post in the sticky section somewhere, I think in the bulletin link about it.
Granted you should not have to accept this from a new product, and I don't blame you for being dissapointed. I don't think there have been any changes, so asking newegg to swap it would be rather pointless just like you said. You may be able to get them to swap it out for another brand, however, myself, I would prefer the MSI hardware and just get a nice aftermarket cooler or modify the fasteners.

Weird plate in NX6600GT TD128E

http://img208.exs.cx/img208/9827/lata12wj.jpg
http://img208.exs.cx/img208/4306/lata37wn.jpg
NX6600GT TD128E
My dealer toldme that all the MSI 6600GT comes with this plate like that . It's that true? or I been owned?
Thanks

Quote from: crull on 06-March-05, 07:48:05
I had no idea your card looked like that even from your pictures.
That is not how it is supposed to look. That L piece should look like just an L with no bent pieces. Look at the pictures of it here.
http://www.newegg.com/app/ViewProductDesc.asp?description=14-127-150&depa=0
mmm... I been owned, there's no doubt
damned dealer (can I say that?)
What should I do? RMA?

HT3702 I've use different credit cards but unable to accept my info keeps asking my for my security code even though I've entered it

I'm unable to use my iTunes credit. I've entered my billing info and it has been rejected even when different credit cards are used

Take a look here:
http://support.apple.com/kb/TS1646
If that doesn't help, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

Pavillion x2 cant project to another creen try updating driver or try a different video card

I dont know if i could watch my laptop on my tv before hand but i assume i could as its a new pc ive just updated to windows 8.1 and plugged in my hdmi cable to my laptop pressed the f4 button and get a message "cant connect to another screen try updating drivers or use a different video card" my pc says driver is up to date any ideas please help!!!!

Hello @h14ppy,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how you are not able to successfully connect your notebook computer to your HDMI TV, and I would be happy to help!
For further assistance, I will need to know:
The Product and Model Number of your notebook computer.
The version of Windows you have installed on your computer.
If your computer has completed all of its important Windows Updates.
If you have updated your HP drivers using the HP Support Assistant.
If this is an on-going, or recent issue.
If you are using an adapter between the notebook and the TV.
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

How to use two different network cards on RT?

Hi everyone... I'm currently working on a project where I have to deal with the issue mentioned in the thread's topic: I have a PC with RT LabVIEW that has to be able to establish network connections using two different network cards. One will be used to connect via TCP/IP with a host computer that will show the data transmitted through shared variables; the other will communicate with another PC through Modbus protocol. The key is that each communication is done through a separate network card.
So far I haven't been able to figure out how to configure both things to happen. Does anyone know how to do this? Any tips will help.
For the RT communication I'm using a standard RT project, with the RT PC being given one of the IPs, and for the Modbus part, I created an I/O server with a master and a slave. Separately everything works fine, but when I get them together it simply won't work.
Thanks for your help!
Solved!
Go to Solution.

Sorry it took me so long to answer, I've been busy lately....I've found a solution to the problem I mentioned, and just in case anyone has similar problems in the future, I'll shortly describe what happened.
As Caseyw suggested, it was necessary to enable both network cards through the Measurement and Automation Explorer. The cause of the connections malfunction was actually that I wasn't using the "right" protocol for the Modbus communication, which ran on the secondary adapter. The solution was to use the URL protocol with the correct path on the field, addressing the right IP address. To avoid making this post a mixture of topics, I won't elaborate futher, but I got the gist of it, so if anyone is having similar problems whether it is working with several network cards or with Modbus communication protocols, feel free to contact me, I'll be glad to help.
Thanks

TS2446 I have tried all of these steps and still says "Your Apple ID has been disabled" thats all it says everywhere. I have also tried reentering all my credit card info into iTunes and it says its invalid so I tried entering a different credit card; Sam

I am having issues with my Apple ID and iTunes. I can log into the Apple ID with no issues on the Apple website and on my iPhone and computer but as soon as I try and do an update to my 51 Apps that need to be updated it says "Apple ID as been disabled" and I have contacted iTunes and they said that my credit card was hacked so they shut it off. So I tried to enter a different credit card in iTunes and it says invalid. But it is not its a brand new card and I have used it multiple times and there is more then enough room on that card. I am upset because this has been going on for over 6 months now and if i make a new iTunes account all my stuff will be lost.
Please help!!

What did itunes support tell you?
If you did everything it says then you contacted them.
From the article you linked:
If the issue persists, you can visit iCloud Support, iTunes Support, Apple Print Products, or contact AppleCare for further assistance."

NX6600GT TD128E SLI (2 Different Looking Cards)

Similar Messages

Maybe you are looking for