NX7600GS-TD256 Desktop Problem

I have just bought this new video card and I already had a problem. We put it inside the monitor as explained on the website, And we started up the computer only to receive a unfriendly welcome of having shadows of colours on the desktop of what we did. When the Windows XP Logo was seen, you could see the shadow of it for a little bit right next to it. We installed the Drivers and used Live Update, Yet. It does not seem to work. We have gotten rid of the shadows, Though now we have blue stripes all over the desktop at some places. Everytime we do something that takes a bit of memory or CPU, The screen turns black and then comes back to show its progress..
Could any of you please help me to fix this? Very much appreciated
Greetings
Vergil
I ran a DXDiag, Maybe It'd help.
System Information
Time of this report: 12/25/2006, 15:00:48
Machine name: NICKPC
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_rtm.040803-2158)
Language: English (Regional Setting: English)
System Manufacturer: VIA
System Model: K7VT4A+
BIOS: Default System BIOS
Processor: AMD Sempron(tm) 2200+, MMX, 3DNow, ~1.5GHz
Memory: 768MB RAM
Page File: 104MB used, 1773MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
Display Devices
Card name: MSI GeForce 7600 GS (NVIDIA GeForce 7600 GS)
Manufacturer: NVIDIA
Chip type: GeForce 7600 GS
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_02E1&SUBSYS_06401462&REV_A2
Display Memory: 256.0 MB
Current Mode: 1024 x 768 (32 bit) (75Hz)
Monitor: Dell M770
Monitor Max Res: 1280,1024
Driver Name: nv4_disp.dll
Driver Version: 6.14.0010.9131 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 6/1/2006 10:22:00, 4529408 bytes
WHQL Logo'd: No
WHQL Date Stamp: None
VDD: n/a
Mini VDD: nv4_mini.sys
Mini VDD Date: 6/1/2006 10:22:00, 3925920 bytes
Device Identifier: {D7B71E3E-41A1-11CF-7954-4A2603C2CB35}
Vendor ID: 0x10DE
Device ID: 0x02E1
SubSys ID: 0x06401462
Revision ID: 0x00A2
Revision ID: 0x00A2
Video Accel: ModeMPEG2_A ModeMPEG2_B ModeMPEG2_C ModeMPEG2_D ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {212DC724-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{212DC724-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{212DC724-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{212DC724-3235-44A4-BD29-E1652BBCC71C}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run

Quote from: Vergil on 28-December-06, 06:23:44
Bought a 500watt PSU, but still same problem. I returned to the shop and after a very short test the guy told me the card was defect , he called it ...... something with art . He ordered a new one, which I hope to collect in a few days.
Just to let you know how the story ended.
Greetz,
Wish you all a healty and prosperous 2007.
nice you have sorted out. let we know when replacement arrive and you have running fine again.
happy holidays.

Similar Messages

Graphic glitches with NX7600GS - TD256

Hello to everyone
I recently bought a NX7600GS TD256 (AGP) and I installed it according to the instructions. The problem I am having is that graphical glitches appear on my screen all the time:
These glitches also appear in the pre-windowsscreens. Any ideas if this might be a hardware- or a software-problem and how I might fix this?

Quote from: Nameisis on 20-June-07, 14:56:34
ur psu is too weak it only has 250W i guess u need at least 350W or more with decent 12A rail
Yeppa, just looked at it. Card requires 350 W and my PSU gives a max of 250 W. Thanks for the help!

Help installing a MSI NX7600GS-TD256 GeForce 7600GS 256MB

Hello,
I was recently given this video card by a friend... MSI NX7600GS-TD256 GeForce 7600GS 256MB 128-bit GDDR2 AGP 4X/8X Video Card. The problem is that it didn't come with any installation instructions. I'm putting it in this motherboard http://www.foxconnchannel.com/product/Motherboards/detail_spec.aspx?ID=en-us0000114.
I know the graphics card is compatible with the motherboard. My question is do I have to connect the graphics card to the power supply in my computer.

gallienus,
Also next time please list your specs so we can get the full picture of what is in your rig.
This will also give us a chance to point out any issues which might be a problem for you.
Take Care,
Richard

NX7600GS-TD256 - system instability

CPU: Pentium4 HT 3.0ghz
Mobo: Soyo P4VTE
Ram: 2x Kingston Pc3200 512mb
Video Card: NX7600gs-TD256 AGP
Hard drive: 120gb seagate IDE
OS: Windows XP sp2
PSU: Grandlab, 480W, 3.3v/20a, 5v/22a, 12v/12a
I've been using a fx5500 256 for a while, and it worked fine. I've just recently upgraded to a 7600gs 256, and i've encountered the error where my comp just freeze completely, at whatever screen I was working on. The other problem that just occurred recently (started as of yesterday) is that the system isn't performing as smooth as it had before. For example, I'm playing the game World of Warcraft, and in the game it now starts skipping. It is very clear that the screen moves smoothly for about a second, then i lag for a small fraction of a second, then it goes back to refreshing smoothly, and repeats. Both problems exist as of now and i'm unsure as to how to fix this, and where the problem is at. Any suggestions would be grateful. Thanks.

What do you consider too expensive? My recommendation is to get a PSU with a single +12rail @ 30A+. Unfortunately, there aren't many single-rail PSUs out there. PC Power & Cooling make single rail PSUs with high amps on the +12V rail, but you may consider them expensive, www.pcpowercooling.com . If you have to go +12V multi-rail go for a PSU with no less than 19A on every +12V rail, not one. I would recommend getting 20A+ for each rail for a mult-rail PSU.
http://www.pcpower.com/products/viewproduct.php?show=S61EPS Silencer 610 with 49A, single +12V rail $155
direct from PC Power & Cooling(will future proof your PSU)
http://www.pcpower.com/products/viewproduct.php?show=S47ATX Silencer 470 with 26A, single +12V rail $99
direct from PC Power & Cooling(will work for now, but you'll need a new one when you upgrade the whole system)
Here are some Enermax PSUs (running from $80 to $100 (59€ to 74€))that have 22A on each rail. I know that the links are for a USA only supplier. I'm just showing you the models and specs(click on the specifications tab). There are some Enermax PSUs on the site that are modular with 22A/rail, but all of these Ive linked to have at least 20A and are not modular(all PSUs below come with 22A on each rail unless indicated otherwise)
http://www.newegg.com/Product/Product.aspx?Item=N82E16817194009
http://www.newegg.com/Product/Product.aspx?Item=N82E16817194010
http://www.newegg.com/Product/Product.aspx?Item=N82E16817194007
http://www.newegg.com/Product/Product.aspx?Item=N82E16817194015
http://www.newegg.com/Product/Product.aspx?Item=N82E16817194012 <---This one has 20A/rail
http://www.newegg.com/Product/Product.aspx?Item=N82E16817194011 <---This one is 22A and 20A
Don't skimp on the PSU.

Fresh install of trial version of Captivate 8 on OS X 10.9.3 - no previous version of Captivate on machine. I've got lots of crashing to desktop problems right off the bat. Is there a patch available?

Fresh install of trial version of Captivate 8 on OS X 10.9.3 - no previous version of Captivate on machine. I've got lots of crashing to desktop problems right off the bat. Is there a patch available? I work at a University and we're evaluating for online courseware - my last experience with Captivate was 5.0. Anyone else experience this with the trial download?

Hi there,
There is no difference in terms of usage and features between a trial version and a licensed version.
Could you tell me do you get any specific error message when it crashes, or does it crash while using a particular feature, or is it random?
Can you also try with a different user account (admin) on your MAC, check if it behaves same there?
Thanks.

HT201321 Finder flashing, "Window Restore", desktop problems

I've never seen this happen before. My finder icon bounces in the dock while a window with this warning is up, "Window Restore problem would you like to restore or not restore?" Since it is flashing on and off you can't click either button. What we found was there was a file on the desktop it did not like, I made a folder inside the main HD and put the items from the destop in it and deleted what was on the desktop. This stopped the Finder bouncing problem but Indesign and Acrobat keep crashing. I can log in as admin and it works well but need to fix the desktop problem. Any ideas?

Hi，
Does the issue occur just after the installation or after some changes?
Please try the follow step to see if it works:
1.Open Task Manager by right-click on Taskbar and select Start Task Manager or by using keyboard shortcut "Ctrl+Shift+Esc".
2.Click on More Details button and go to "Processes" tab.
3.Now look for "Windows Explorer" process. As soon as you click on it, you'll get a new button "Restart" at the bottom-right corner of the window.
4.You can also right-click on the process and select "Restart" option.
If it doesn't work,please try the safe mode and clean boot mode to check the result.
How to perform a clean boot to troubleshoot a problem in Windows 8.1, Windows 8, Windows 7, or Windows Vista
http://support.microsoft.com/kb/929135
Regards,
Kelvin hsu
TechNet Community Support

Does the NX7600GS-TD256 require a molex connector?

There is no reference in my documentation about needing to connect a separate power connector to my newly acquired NX7600GS-TD256, though the card does appear to have a power connector there. Looking around the net I'm finding conflicting reports... some sites say it needs a molex, others don't mention it.
The card appears to run perfectly without it mind you, but I'm curious if I'm supposed to be plugging something in there.
Thanks for any help.
datter

Quote from: datter on 11-October-06, 10:38:54
So taking a spare plug from my power supply, if I have one that is, and sticking it into the power socket on the video card would be wise? Even though it's seemingly working fine without it?
yes plug it mate. its strongly recommended, to ensure VGA stability and property working.
"Even though it's seemingly working fine without it?"
well under heavy VGA load (hard 3d gaming) artifacts may comes, reboots, BSOD may comes also when VGA is starting to drain power and don't have it enough. also there is a possibility mobo to take damage when starting to drain too much power via AGP slot instead from alternative.(VGA power connector).
find a free power connector from to PSU and connect it to the VGA directly.

Desktop problems after Snow Leopard Installation

After a successful installation of Snow Leopard I am having problems with my Desktop. No matter what Desktop graphic I choose, after 2-3 minutes the Desktop goes back to a plain blue background. Any idea what is causing this? and how to fix it?

Hmm,
I was not familiar with EarthDesk but now that I know about it - I conjecture that application runs in the background, right?
If it does run in the background - then that is the real base of the problem installing Snow Leopard. Others with (other) apps running in the background have experienced repeated run-then-eject-installer problems. One person reported that CarbonCopyCloner's scheduling app caused this specific problem.
Now, I understand that the desktop problem isn't the same as having the installer begin to run, then stop and eject the installer disk. My point is only that apps running in the background are apparently causing (now various) problems with the SL installer.
Glad to see that one more problem has been solved.

Desktop Problem-Icons Won't Work or Won't Adjust

Yesterday my desktop icons decided to not work. I could not open from the desktop, move folders, etc. It is as if they were all locked. I COULD open Finder, go to Desktop, and open files and start apps from there. Then I went to View Options, clicked Snap To Grid, and all icons moved. I then turned it off (None). But the icons won't respond. They are stuck in "Snap to Grid." I still can't open a folder on the desktop, but applications will now start.
This is a bizarre one. Any help would be appreciated.

I've been having this problem as well, restarting only corrects it for about an hour or so. Was not able to find the library com.apple.finder.plist file in my library and then did a universal search using that string and no results. Not sure why other people have that preference file and I don't. This is a frustrating problem that will influence my decision to purchase new Macs in the future. It's a real time waster. In addition, often when I click on a folder, it comes up empty, even though there may be hundreds of files in the folder. It seems it's part of the same problem, inasmuch as the finder can't process data nodes correctly. The only solution is to open the folder, close it, and open it again and then the files inside it appear, albeit slowly.

Cisco VPN Software and Remote Desktop Problem

Hello-
Please have patience as I just got my first mac and I'm really just learning how everything works.
Anyway, I'm trying to connect to my office network from my iMac (OS X 10.5.3) using the Cisco VPN client ver. 4.9.01 (0030) and the Remote Desktop Connection v2.0.0 Beta 3. I'm able to connect via the VPN but I cannot connect to the remote machine using either the machine's hostname or IP address.
In order to troubleshoot the issue, I tried to ping the remote machine after connecting via VPN and it fails. The name is resolving but ping fails with a "No route to host" and then "Host is down error." However, I know the host is up since when I connect via VPN from my PC I can ping the remote machine without a problem.
Anyone have any ideas? Does the Cisco VPN client for Mac not work well? Is there some simple configuration setting I'm missing somewhere? BTW, I'm connecting to the Internet via WiFi and am using a Linksys WRT54G router.
thx,
ian

Hello Ian:
Welcome to Apple discussions (and to the wonderful world of Macs). I think you will find these forums represent the best on-line community anywhere - and everyone is a volunteer!
I am no help with your problem as I have not used a Cisco VPN. However, in my previous business life I did connect my home Mac to my business VPN. I found that our IT people were most helpful in smoothing connection issues.
This forum addresses connection issues if you want to post there:
http://discussions.apple.com/forum.jspa?forumID=1222
Barry

Portege m700 Tablet Extended Desktop Problem

I've looked all over and can't find a good answer to this, so I figured I'd better check with the source! I have a Toshiba Portege m700 tablet PC, which has an LCD monitor connected using the digital cable.
I have the external monitor set as my primary, with the notebook monitor set as the secondary, providing extra desktop real estate to the right of the first monitor.
The problem is that when I use the touchscreen, the mouse controls are only active on the primary monitor (the external one). What I'd like to do is have the external monitor be primary, the notebook monitor be secondary, and be able to drag items to the notebook and use ink, or onenote, or other touchscreen apps on there. I want the touchscreen to control ONLY the secondary (notebook) monitor. Is this possible?
It seems like there should be some way to just instruct the computer to map the touchscreen to the secondary monitor instead of always just mapping to the primary.
However, if there is not, what I did experiment with is having the notebook as primary and the external as secondary, and then using some sort of multimonitor software to manage the taskbar and such to create the illusion of the external monitor being primary. The problem here is that while the notebook is 1280 x 800 resolution, the external monitor is capable of 1280 x 1024, but when set as secondary will go no higher than 1280 x 800. Is there a way to force the external monitor to run in 1280 x 1024 if I'm using it as the secondary?
Is this something for which I need an updated graphics driver? I tried to get a newer version of the Intel GMA, but it actually removed all extended desktop options for me, so I rolled it back. The version it's running is 6.14.10.4837.
Thank you in advance for anyone pointing me to any driver updates, configuration directions, or external software that can effectively manage all these options of extended desktop, screen resolution, and what monitor is assigned to touchscreen control!

I've just tested the "Extended Desktop for Tablet PC" powertoy, and that doesn't solve this problem. With the tablet set as the secondary monitor, when I move the window onto that screen, it just recurses the image over itself, which isn't really useful.
No one has any other ideas about this?

IMac 27" extended desktop problems

Hi!
I own a 2011 iMac 27" and I am having issues using a Samsung SyncMaster T240M display as extended desktop.
It works fine when I am just using the computer for a while, but if the displays go to sleep mode, when I return to the computer the iMac display restores right away but then the Samsung display starts to go on and off repeatedly until it finally stays on, but then all my applications are on the iMac display.
It is pretty much like what would happen if I had unplugged the monitor and plugged it back in.
Is there a way to fix this or do I just have to live with that? Has anyone experienced the same problem with other displays? Maybe this Samsung display is not syncing well with the iMac?
Anyway, any help will be very much appreciated.
See you,
JP

If the machine is covered by warranty or even better by AppleCare then contact AppleCare. They will be able to do in-home service if you are within 50 miles of an AASP. You will have to request this service but they will do it.

Centering JFrame on desktop problem

I have this code which centers JFrame on the desktop and which works fine only outside the constructor of the JFrame class. How can I make sure that the JFrame window is centered on the desktop when it opens?
GraphicsConfiguration gc = this.getGraphicsConfiguration();
Rectangle bounds = gc.getBounds();
int x = (int) ( bounds.getWidth() - this.getWidth() ) /2 ;
int y = (int) ( bounds.getHeight() - this.getHeight() ) /2;
this.setLocation( x, y );
The problem is that at "constructor time" the width and height are 0 (in this.getWidth and this.getHeight methods of JFrame).
any alternative to make it work?
thanks

I order to center the JFrame you can always get the screen size then simply set it's bounds e.g.
java.awt.Toolkit tk = java.awt.Toolkit.getDefaultToolkit();
Dimension scrSize = tk.getScreenSize();
Then depending on it's size determine the size you want the JFrame, and calculate the x, y co-ordinates. Making the size a fraction of the screen size, is easy to center e.g.
youJFrame.setBounds((int)(scrSize.getWidth()-(scrSize.getWidth()*.75)), (int)(scrSize.getHeight()-((int)scrSize.getHeight()*.75)),
(int)(scrSize.getWidth()*0.5), (int)(scrSize.getHeight()*0.5));

Aperture import and desktop problem

My Aperture main screen had changed and can not be fully used, as some pictures are not vissible in the browser view. As well the picture if shown in full screen in the main screen is not shown properly - 1/4 on the right side is missing.
Today I realized, that the missing 1/4 of the working desk is impacting the import - the menu to put create new project and all the data of the picture is missing - so totally impossible to import new pictures.
Does any one know how to adjust the desk in Aperture and show/hide the importing dialogues?
help appreciated.

Hello Milo,
a similar problem occured recently, see this discussion.
The problem could be solved by removing the preferences file to the Desktop and restarting Aperture, for Aperture stores the layout of the main window in this file.
The preferences file is ~/Library/Preferences/com.apple.Aperture.plist
That file is in your User Library.
Quit Aperture, if it is running,
To reveal the hidden User Library in Lion, activate the Finder by clicking on the Desktop, then go to the main Finder menu at the top of the screen, and select the menu Go -> Go to Folder.
in Lion now hold down the alt-or-option key, and your User Library will appear in the Drop down menu. Select it to open in Finder. (in other MacOS you can access your User Library by opening your Home Folder from the Finder Sidebar).
Once your User Library is revealed in the Finder, navigate to the sub folder "Preferences" and scroll down the long list, until you find
com.apple.Aperture.plist
move it to the desktop.
Log off and log on again.
restart Aperture and see, if the fix worked.
And please, post back and tell us, if you were successful
Regards
Léonie

Java desktop problem after patch 118870-01 install

FYI
Java desktop stopped functioning properly after the installation of patch 118870-01, part of the recommended patch cluster.
Symptoms included no longer being able to launch mozilla, and upon reboot, no longer being able to login to java desktop.
patchrm 118870-01 fixed the problem.

Found that patch 119593-01 also appears to be causing the problem, along with patch 118870-01.
Fun :)

NX7600GS-TD256 Desktop Problem

Similar Messages

Maybe you are looking for