NX7950GT-VT2D512EZ-HD driver

Hi (in italian Ciao ),
yesterday I installed my new msi graphic card (NX7950GT-VT2D512EZ-HD) on mu asus p5wdh deluxe.
After that, I installed the driver in the cd.
I have a question about driver version.
I see that the driver version on msi site form my card is 91.47.
On nvidia site I see that the driver version for cards based on 7950GT is 93.71.
Why are they different?
Can I install the new driver version on nvidia site?
Thanks for your support
Best regards
Marco

Thanks very much
I will update my card driver tomorrow.
Thanks again
Bye

Similar Messages

Output NX7950GT-VT2D512EZ-HD

Hi,
I have a great problem with my graphic card NX7950GT-VT2D512EZ-HD.
My HTPC is composed by a motherboard asus p5wdh deluxe with graphic card msi NX7950GT-VT2D512EZ-HD.
A few minute ago I built my htpc.
I connected the output of my graphic card to my lcd loewe xelos A32 with a cable DVI-D (dual link) - HDMI.
Well, in my tv the image is orrible, the color are not vivid and the image shakes. >:(
I tryed to install the vga driver from msi cd but nothing happened.
I tryed to connect my home pc with an ati x600 with the same clable to my tv and the image is optimal.
I supposed that my msi card has some problems
I'm very angry!!!

Quote from: spinmar on 28-December-06, 17:52:32
No because in relevant post it's suggested to use always the new nvidia driver instead of msi vga driver.
In your opinion using msi driver can i solve my problem?
it possible.
get Driver Cleaner and remove currently drivers.
then get 91.47 from Nvidia http://www.nvidia.com/object/winxp_2k_91.47.html and re-test.
if no go retry with MSI Drivers.

GeForce NX7900GS-T2D512E vs GeForce NX7600GS Noise

Hello,
I expect to start a new build shortly, and I am trying to build a low-noise computer that will last and maintain relevance for a few years and mainly support photoshop.
My intended system:
* 2 x Seagate Barracuda ES 750 GB SATA drives, RAID1
* Antec SOLO Quiet MidTower case
* MSI 875X Platinum with a Core 2 Duo, 2.4 GHz Processor with 4MB Cache
* Corsair TWIN2X2048-6400 2GB Kit DDR2-800 XMS2-6400
* 2 x Sony DRU-830A 18X Double Layer DVD±RW
* Zalman ZM600-HP HeatPipe Cooled 600w Modular Power Supply
* Samsung 244T-Black SynMaster 24in Analog/Digital LCD
* MS-VISTA Home Premium 64-Bit
* MSI GeForce 7600GS-256 or 7900-GS-512
My impression is the GeForce NX7600 sets the standard for low noise, but perhaps the NX7900GS-T2D512 doesn't generate much more noise? Any reviews or info that has quantified the noise for the 7900GS-512? I've found relatively good noise accounts for the 7900GS-256 so I presume the 7900GS-512 is similiar and will maintain relevance longer than say the 7600-256, and if the noise is low enough I'd probably rather buy the 7900GS-512. Comments?
Thx.
Scott

if you are looking for low noise, should get some VGA with passive cooling or water cooling solution.
NX8600GTS-T2D256EZ-HD
http://global.msi.com.tw/index.php?func=proddesc&prod_no=1197&maincat_no=130#
NX7950GT-VT2D512EZ-HD
http://global.msi.com.tw/index.php?func=proddesc&prod_no=1045&maincat_no=130&cat2_no=136
NX7900GS-T2D256EZ-HD
http://global.msi.com.tw/index.php?func=proddesc&prod_no=1065&maincat_no=130&cat2_no=136
there is much other choices as well with passive solutions, or Water cooled, take a look them here:
http://global.msi.com.tw/index.php?func=prodpage2&maincat_no=130&cat2_no=136

9-pin mini DIN socket

Does NX7950GT-VT2D512EZ-HD have a 9-pin mini DIN socket? I want to connect the card to my televison via s-video. Is this the correct cable: http://www.hama.de/portal/articleId*125830/action*2563/searchMode*1/bySearch*34098#1 ??
Does anybody know where I can buy a cable/adapter (HDTV / Video-out connection cable) that is similar to the one that came with the card?
All the best!
eha

Quote from: eha on 25-January-07, 18:17:12
From MSI technical support team: "Besides, NX7950GT-VT2D512EZ-HD don't have a 9-pin mini DIN socket and please refer to the link to get more information: http://www.msi.com.tw/program/products/vga/vga/pro_vga_detail.php?UID=765
What ???
Does anybody know where I can buy the adapter/cable that came with the card?
eha
as i can see its 9pin mini DIN socket...
"Does anybody know where I can buy the adapter/cable that came with the card? "
in some computer store/shop.

How to install capture drivers from cd?

Hello,
i just bought the NX7950GT-VT2D512EZ-HD card and installed it. it should have video in but when i click on the "install capure drivers" option on the cd menu nothing happens. everthing else i click on in the menu works. the pop up information says that you can only install the drivers if your card have the video in option. what could be the problem ? and what could i do to fix it?
(windows xp, core2duo 2,13, 2gb DDR2 FSB800, ASUS So. 775 P5B-E Plus).
thanks for any help!

latalante,
Download and install the last nVidia ForceWare & WMA Drivers
Then take the MSI CD, set it on your desk, go to the kitchen and pour your favorite cold drink. Come back to your desk and put your drink on the CD. That is about all they are good for.
Take Care,
Richard

Enable SLI mode on K8N SLI Platinum

Hello, I got an older AMD64 3500+ CPU on a MSI K8N Platinum SLI motherboard, model 7100 (with a flip-board SLI switch), 2x512Mb DDR400 Corsair XMS512C2 memory, a Soundblaster Live! 4.1 soundcard on a PCI slot and two GeForce 7950 GT 512Mb DDR3 PCI-E cards. Power is supplied by a Corsair HX620 620W with separate power cables to each card. No signs of instability on the system whatsoever (no overclocking applied). Built-in sound card, Firewire, RAID and other integrated peripherals disabled in BIOS.
I recently got the second GFX card from a friend, and they are likely not from the same manufacturer. I have installed both cards, flipped the SLI board to "SLI mode", installed the SLI bridge that came with the motherboard, yet I can't get SLI to fire up. Both cards have exactly the same BIOS revision and exactly the same clock speed (core and memory) when checked with the ESA tools from Nvidia.
I have reinstalled the newest Nforce4 and Geforce drivers, but to no avail. Both cards are installed and enabled in Windows XP (32bit SP3), but I don't get any options for SLI in the control panel, and I don't see any performance difference in-game. I have looked in the BIOS for SLI-enable-settings but found none.
Is there anything else I can do to enable SLI mode for the system? Or are the cards simply incompatible? Reflashing with some stock BIOS on both cards, can that make them compatible? Or is maybe the SLI bridge not seated properly? What exactly ARE the requirements for two cards to match, anyway?
Further, does anyone know the real-world implications of disabled PCI prefetch, as this was disabled in the last update for the motherboard? I use a PCI soundcard, and have some performance issues in games that seems to be somewhat correlated to sounds being played.
Best regards, Martin "xarragon" Persson

Quote from: Svet on 12-August-09, 20:23:52
which one? http://eu.msi.com/index.php?func=searchresult&keywords=NX7950GT
Min seems to be the "MSI NX7950GT - VT2D512EZ - HD", latter one with VIVO support. It does have passive cooling using heatpipes, and a sticker on it says what I put in double quotes above. That would be this card:
http://eu.msi.com/index.php?func=proddesc&maincat_no=130&prod_no=1045
The sticker/model name for the ASUS card says:
ASUS P455 REV: 1.00
EN7950GT/HTDP/512M/A
I suppose it ought to be this card? http://www.asus.com/product.aspx?P_ID=5XmjRmrwz3r9rWuv
I have also used GPU-Z to pull the following info from the ards, when they were connected one-by-one to the primary PCI-E 16X slot with the SLI bridge set to "non-SLI" mode.
GPU-Z: MSI BX7950GT-VT2D512EZ-HD:
GPU: G71 Revision: A2
Device ID: 10DE-0295
BIOS Version: 5.71.22.42.06
Subvendor: MSI (1462)
ROPs: 16
Bus interface: PCI-E x16 @ x16
Shaders: 24 Pixel / 8 vertex
DirectX support: 9.0c / SM3.0
Pixel fillrate: 8.8 GPixel/s
Texture fillrate: 13.2 GTexel/s
Memory type: GDDR3
Bus width: 256 Bit
Bandwidth: 44.8 GB/s
Memory size: 512 Mb
GPU Clock: 550 MHz
Memory: 700 MHz
GPU-Z: For ASUS P445
GPU: G71 Revision: A2
Device ID: 10DE-0295
BIOS Version: 5.71.22.42.06
Subvendor: ASUS (1043)
ROPs: 16
Bus interface: PCI-E x16 @ x16
Shaders: 24 Pixel / 8 vertex
DirectX support: 9.0c / SM3.0
Pixel fillrate: 8.8 GPixel/s
Texture fillrate: 13.2 GTexel/s
Memory type: GDDR3
Bus width: 256 Bit
Bandwidth: 44.8 GB/s
Memory size: 512 Mb
GPU Clock: 550 MHz
Memory: 700 MHz
Both cards work fine, with the MSI card being slightly hotter due to the passive cooling. The ASUS one got an aftermarket Zalman VGA cooler mounted.

I install window 8 and Unfortunatly all drive format. And all drive mix, now i have only 1 DRIVE C. I want Bit locker Drive's data Back

Last sunday i install a window 8 and this window format my all drive & make it 1 drive (DRIVE C). Before all of this i have 5 drive in different size with 1 Bitlocker protect drive.
So i try data recovery software to recover my data. i got back all my data without that ( bitlocker ) protected drive.
so please guys help me how can i get back data from bitlocker protected drives.
please please help me.

Hi,
I sorry for your experience, but there is no way to recovery the data encryped by BitLocker untill now.
BitLocker is designed to make the encrypted drive unrecoverable without the required authentication. When in recovery mode, the user needs the recovery password or recovery key to unlock the encrypted drive. Therefore, we highly recommend
that you store the recovery information in AD DS or in another safe location.
Please refer to the link below for the statement:
http://technet.microsoft.com/de-de/library/ee449438(v=ws.10).aspx#BKMK_RecoveryInfo
Roger Lu
TechNet Community Support

HP LaserJet Enterprise 600 M602 driver issue

Hello,
I've got issue with 600-series printers. We use the latest UPD drivrer ver. 61.175.1.18849 and print from XenApp 6.5. The error occurs every time when users try to print jpg files from XenApp session. It only happens with 600 series printers and UPD.
Also I've tried to assign native 600-series driver ver. 6.3.9600.16384 and it works good. But with that driver system says that it's color printer and it brokes our printing reports. These reports are very important for us. So we can't use printer and that driver as well.
Printer installed on Windows Server 2012 R2. All clients are Windows 7 x64. XenApp Servers are Server 2008R2.
Is it possible to get fixed UPD driver or correct native driver for Server 2012 R2?
Regards,
Anatoly

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
Click on New Post.
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

PCS no longer sees BT Widcomm driver

Hi
[cross-posted in Connections]
I have a 6230i and a Safecom BT dongle using the Widcomm 1.4.2 build 10 BT driver s/w on Vista.
This all used to work OK, but after installing PCS v6.85.14.1, the Nokia Connection Manager now no longer shows the Bluetooth (Widcomm) option - just the Bluetooth (Microsoft) option. If I try to check the MS option, I get the "Cannot use the connection type ... Code (OpenMedia)" error.
I've tried all sorts of repairing and uninstalling BT & PCS s/w but to no avail.
Any ideas why PCS no longer seems to recognise the Widcomm BT driver?
Message Edited by mrb08 on 17-Feb-2008 10:26 PM

Just to close this off here's my post in the other thread.
Yes I finally managed to confirm that it's a PCS bug. Here's what I did.
It appears that PCS cleaner app does not support Vista nor later versions of PCS. After uninstalling all Nokia s/w from my PC, checking no old Nokia folders remained, cleaning the registry and then reinstalling PCS 6.85.14.1, the "Cannot use the connection type ..." error remained. :-(
Then I managed to find an old download of PCS (v6.82.27.0) and after installing that, the connection error is gone and the Bluetooth (Widcomm) option is back in Connection Manager! :-)
How does one report a PCS bug to Nokia?

IPod not recognized by iTunes, Windows Vista prompts to format iPod drive

Hello,
I have IPod 80GB which I rarely use. Yesterday when I wanted to use it, I went to add a few new audios to it, connected to my computer and launched iTunes. I added the folder which contained audios to iPod, synced it and wanted to disconnect, but iTunes took excepionally long to finish.
When I clicked on 'eject' icon, I go a message saying 'some files are being accessed' or something like that. I waited for 5-10 minutes but it won't finish up, so I unplugged my iPod as I had to leave.
Later when I wanted to play, I noticed I had no audios in iPod at all.
Later when I got home, connected it again to computer, launched iTunes, but iTunes won't show iPod. A few minutes later, windows (Vista) prompted a message saying that it needs to format N: drive (which was iPod).
I tried diagnostics on tis site, restarted/reset iPod etc, but it didn't solve the problem. I removed and reinstalled iTunes as per instructions, still no use.
Then I called Apple support Canada and the guy on the phone said I need to pay to get support. He said he'd send me some documents via email which would solve the problem and hen I wouldn't have to pay. I gave him my email address, but so far I have recieved no emails from him. I have checked my spam and junk folders, just in case, but nothing there.
Anyhow, this issue came up all of a sudden, there has been no physical damage to iPod, I barely use it. maybe for few minutes here and there a month. I have had numerous problems in the past every time a new iTunes update come, it always creates problems. Last year I spent many hours after iTunes update make iPod unrecognizable so I had to go back to older version, then upgrade etc. I don't remember how I solved the issue, but it took a while and it turned out to be something of iTunes version issue.
I wonder if this is another of such issue. I hope its not a hardware issue with iPod. I'd appreciate any help.
Thanks

I just got Vista too and it does recognize my ipod, but itunes can't find a lot of my songs on the computer. I tried to uninstall itunes and reinstall it thinking that it would seach for new music when I installed it again but nothing new happened when I did that.

ITunes + Vista = my computer can no longer see my DVDrw drive...

I just downloaded iTunes 7.6.2.9 onto my Dell Inspiron E1705 - and when I restart my computer, the computer can no longer see my Optical drive (DVDrw). I contacted Dell support, and they changed something in the regedit limits or something(I'm not a techy lol), and my optical drive was back.
But the next day when I opened iTunes I got a message that says:
"Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
So I reinstalled iTunes.
I restarted my computer, and it could no longer see my optical drive AGAIN. My DVDrw drive gets an error that says "This device cannot start (Code 10)." When I check for solutions it says "Could not load driver software."
I go back to Dell support and tell them my optical drive isn't working. They do the exact same thing to fix it (deleting some limit with regedit) and it works. I open iTunes, and I get the iTunes Warning (Setup Assistant Error).
I asked the Dell tech what the deal was, and he said iTunes isn't compatible at all with Vista.
But according to Mac's website it is...
Anyone know what's going on?!?!

I am having the exact same behavior as xhollysue!
It goes like this:
1. Install ITunes, lose optical disk drives hardware (they don't even show up in Windows Explorer).
2. Use RegEdit to disable Upper Filters at HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE1 0318}, optical drive hardware re-appears.
3. iTunes requires a re-install to permit CD burning, and your back to square one.
I got the above fix NOT from a Dell technician, but, instead, from a Microsoft technician, which cost me $70.
I would strongly urge Apple to research this issue and come up with a more reasonable workaround since (1) the iPhone is being adopted by many traditional MS users and the use of iTunes is an integral part of the iPhone technology architecture; (2) iPhone 3G is just now shipping and will bring even more into the Apple camp; and (3) iTunes is clearly a better media player.
Come on Apple. Let's get some enthusiam and take advantage of this opportunity!

External Drive is no longer recognized by Macbook

I have this external drive....
http://www.amazon.com/Western-Digital-Passport-Essential-WDME2500TN/dp/B0012GK3M Q/ref=sr11?s=electronics&ie=UTF8&qid=1280159206&sr=1-1
It is about 60% full of music/pictures/documents that are NOT on my Macbook, therefore I use it regularly.
Every once in a while, I accidentally remove it without properly ejecting first. But I guess I did it one too many times because now the computer will not recognize it at all.
To insure that the drive wasn't corrupt, I plugged it into a PC. It worked fine. The files are all there and were completely accessible. But as soon as I plugged it back into the Mac, it won't show up.
When I try a Disk Utilities repair, I get the following message:::::
FIRST AID FAILED
Disk Utility stopped repairing “My Passport” because the following error was encountered:
The underlying task reported failure on exit
Verify and Repair disk “My Passport”
** /dev/disk1s1
** Phase 1 - Read FAT
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
Unable to read directory (Input/output error)
Error: The underlying task reported failure on exit
1 non HFS volume checked
1 volume could not be repaired because of an error
I have NO $$$, so telling me to purchase a $30-100 program will not help me AT ALL. I'm looking for solutions that will not effect my wallet, even if they take all day to complete.
What can I do????????

Ok. Just to set one part straight- I doubt the problem came from unplugging your drive without ejecting. This usually isn't a problem unless files are writing or in use when you do it, but ejecting is a safe way to avoid issues.
Try force-mounting the drive in terminal by using the following commands
*mkdir /Volumes/yourdrivename*
this command should give you the location of the drive on your computer. (It should be something like disk2 or disk1s3) Then type the location into:
*mount /dev/yourdrivelocation*
Whether or not this works, follow up this step by ejecting the drive and unplugging and plugging it back in. This worked for me when I was having this issue.
Also- are you able to backup and reformat the drive? This would be a good thing to try if other attempts have failed.

Format C drive, what steps to take for retaining all data of iTunes?

Hello
I want to format my C drive of Laptop and shift my itunes to E drive. I'm on windows 7. C drive is having itunes and in that I have synced my 2 iphones and 1 ipad.
Now I want to format the C drive and want to retain all the data, backup, media etc of my synced data with the itunes.
What I've done is that I transferred my music location from C to E drive by using apple forum discussion. I changed destination to E drive in ADVANCED TAB in Edit-Preferences. Then orgainzed data. That was successful.
Now please help me on what to do next so that i can retain my all my data of itunes safe before formatting my C drive.
Thanks in advance

This definitely isn't intended as a substitute for tt2's tutorial (which is comprehensive and more detailed - in case of any differences I'd follow what's stated there), but in summary you should be doing the following. I've assumed that, as per your original post, you've changed your media location to E:\iTunes and consolidated the library. You now have a "split library" where:
E:\iTunes contains a folder called iTunes Media which in turn contains several subfolders such as Automatically Added to iTunes, Audiobooks, Music, ...
C:\Users\your user name\Music\iTunes contains the following folders and files:
Album Artwork (folder)
Previous iTunes Library (folder)
iTunes Library Extras.itdb (file)
iTunes Library Genius.itdb (file)
iTunes Library.itl (file)
iTunes Library.xml (file)
I'd suggest making sure that you're running the latest version of iTunes before proceeding - by default, this will be the version that you download and install when you rebuild your PC.
Before you change anything else, exit iTunes. Now copy all of the folders and files in C:\Users\your user name\Music\iTunes to the same folder on your external drive (E:) that contains your media folder. You should now have this:
or something very similar. Now restart iTunes while holding down the SHIFT key. You will see this dialog:
Select "Choose Library ..." and navigate to the folder on your external drive with the content as described above. Select the iTunes Library.itl file and click OK. iTunes will load - check that everything you expect to see is there.
You now have a "portable library", i.e., all your media and the files that iTunes uses to organize them. You can use this in conjunction with any PC running Windows and iTunes (noting limitations regarding your iTunes account and authorizations). As tt2 suggested in his response, before you go any further:
Make a backup of your new portable library to another device.
De-authorize your iTunes account.
Back up everything else you need to retain from the C: drive of your PC (this is beyond the scope of this forum - there's plenty of help out there on various Microsoft sites, etc.). Just remember that once you take the plunge and reformat the C: drive anything that you haven't backed up is gone ...
Once you've reformatted the drive and reinstalled Windows, install iTunes. As befpre, hold down the SHIFT key when you start it up and select the iTunes Library.itl file on your external drive. You can then re-authorize iTunes and be back in business ...

Have Old Hard drive and want to move old data onto new hard drive in imac.

I am trying to get my files off of an old hard drive. I have it hooked up through a sata drive. I am able to access all the programs but for whatever reason I am unable to access any of the files, i.e- 1,00's of pictures, videos, music, and documents. Is there something else I need to do in order to get the files, or is it possible that all the programs could still be on it but the files are just missing? In the current Sata it only has two plugs but on my hard drive it looks like there is another place to plug something in.

Hello again Shadow,
The way I do this is to:
1) Install your new hard drive into your iBook
2) Get your iBook reassembeled
3) Place your old hard drive in your firewire enclosure
4) Insert your install DVD into your iBook and restart with the C key held down. When the installer launches, select your language in the first pane, click 'continue' and in the upper dropdown menu in the next page select Utilities > Disk Utility. After DU is open, select your hard drive from the list of volumes on the left (the very top one), and then click the 'Partition' tab to the right. Then select 1 partition (normal) and make sure that you have 'Mac OS Extended (journled)' selected in the lower section. Then click 'partition'
5)Quit disc utility, which brings you back to the installer. continue with your installation of OS X. In one of the first steps you will see a button on the lower left which says 'options' click on that and make sure that the option 'Installs OS X for the first time' is selected. It will normally be selected by default with a new drive.
6) After the installation, the Migration Assistant will ask if you would like to transfer your information from another mac. click yes then follow the instructions. but instead of using another mac, connect a firewire cable from your enclosure with your old hard drive installed. The installer will think that this is another mac and will transfer all of your account information and user files (everything!)from your old drive to your iBook's new drive. Just diconnect when it says to and complete the installation sequence.
You're done!
Check back again if anything is unclear.
Randy
Message was edited by: DesertSage

I was given the wrong macbook when I gave mine in for repair. I want to complain. Also, they wiped ALL my data off the hard drive. I want to complain to someone in authority. How?

I am extremely disappointed and angry with Apple service. I am a writer and booked three weeks in Spain so that I could finish my book. On the second day my laptop cut out on me asI was working on it, so I took it to Goldenmack in Cadiz. Not only was I given someone else's macbook when I went back to collect it, but then when I returned to the UK, the Apple shop in Brighton managed to delete ALL my data from the hard drive because I was unlucky enough to get a trainee on her first day. I have since learned she should not have deleted my data without even running a diagnostic. She told me she was going to 'restore' the drive. I took this to mean she was going to restore my work. But no! She erased the lot.
I complained and eventually was put in touch with a supervisor, who I was told had authority to resolve the issue. She said she would get the shop to phone me. That was ten days ago and I'm still waiting.
Ok so there's nothing I can do now to get back the three chapters of my book that I have lost and didn't back up, but the hard drive on this laptop is still faulty. I try to back up my work every time I use the machine but as soon as I attach an external drive, the whole thing shuts down. I can't use it any more as I can't risk losing any more work. This laptop is only just over a year old and this is just not acceptable, especially since I have really looked after it.
This is an appalling service I have encountered from Apple, and I am not going to ignore it. I have contacted the young chap whose laptop I was erroneously given, and the repair of which I paid for! (although I did eventually get a refund), to ask him if he had been given mine as well. He said he had been completely unaware that his laptop had been given to me and he is furious as he had loads of "sensitive material" on it." I have no idea in whose hands my laptop has been either, or indeed what damage it sustained while it was supposed to be in for repair.

Contact Apple Support:
http://www.apple.com/support/contact/
Apple - How to Contact Us:
http://www.apple.com/contact/
Be sure to refer to the repair ticket number.
Sounds like a terrible mixup.
Good luck & happy computing!

NX7950GT-VT2D512EZ-HD driver

Similar Messages

Maybe you are looking for