NX8500GT-MTD256EH and /D2 difference?
Can anyone tell me what the difference is between the NX8500GT-MTD256EH (which I own) and /D2 version which is now on the MSI web site?
Thanks
Patto
Quote from: patto on 14-September-07, 15:06:31
Thanks for the reply but I was asking about the two different versions of the 8500GT-MTD256EH cards. I have purchased a 8500GT-MTD256EH about a month ago, but I see now the model number has changed to 8500GT-MTD256EH/D2 and the previous version is not listed anywhere.
Thanks
Patto
PS: Mainboard is ASUS P5K-VM (G33 chip), with a E6550 in a HTPC
Probably is the same then.. just with changed name, there is no other model 8500GT-MTD256EH
Here is confirmation as well:
NX8500GT-MTD256EH:
http://www.msicomputer.com/product/p_spec.asp?model=NX8500GT-MTD256EH&class=vga)
NX8500GT-MTD256EH/D2:
http://global.msi.com.tw/index.php?func=proddesc&prod_no=1231&maincat_no=130&cat2_no=136
Its the same VGA...
Similar Messages
-
Hello all!
I am going to buy NX8500GT-MTD256EH graphic card and P35 Neo mobo.
What should I do to have both voice and picture via graphic card HDMI-connector?
I think that I know what to do with software, but with hardware?
Obviously I have to connect mobo SPDIF-out to graphic card SDPIF-connector, but what kind of cable I need and from where I can get it?
Ps. I apologize my bad English, Greetings from FinlandThe cable should have come with your card! They usually supply two cable options, onw that can go from a digital RCA connector out to the vga card and one that can go from them mainboard spdif pins to the vga card.
-
Low Profile Bracket for NX8500GT-MTD256EH
Hey guys, I have one of these:
http://global.msi.com.tw/index.php?func=proddesc&prod_no=1231&maincat_no=130&cat2_no=136
And I need to buy the low-profile vga bracket so it'll fit in my slim-PC. I've tried contacting them via email, contact submission, calling several times, but never gotten a response. Any easier way to get one of these? Maybe a vendor? Thanks!If you would have done a search on Google you would have seen that the #1 complaint is that it doesn't come with a Low Profile Bracket... example:
http://www.newegg.com/Product/ProductReview.aspx?Item=N82E16814127301
A site that sells the card WITH the low profile bracket...
http://www.aria.co.uk/Products/Components/Graphics+Cards/PCI-E/nVIDIA+GeForce+8+Series/MSI+GeForce+8500GT+256MB+HDMI+Low-Profile+Silent+PCI-E+?productId=30971
A site that says you can buy the bracket from MSI (but the # doesn't work anymore...)
http://www.pricespider.com/product-reviews/997462/MSI-NX8500GT-MTD256EH-GeForce-8500GT-HDMI-HDCP-Silent-Heatsink-Video-Card-Review-NX8500GT-MTD256EH.html
I knew of all these things already, but was hoping that the Forum had a good way of contacting MSI (because all the methods I've tried in Post #1 didn't work) -
NX8500GT-MTD256EH audio problems
i just installed this card today and found i don't get any sound from the headphone output but i can get sound from the optical output. i double checked everything and even re-installed the card and found before i install the drivers from the disc everything works fine but it doesn't work after installing the drivers. am i missing a audio driver that is on the disc or a downloadable one?
my set up
vista home premium
NX8500GT-MTD256EH (hdmi)
realtek HD audio manageri just copied and pasted all of the info. looks like i have a ASUSTek motherboard.
Field Value
Computer
Computer Type ACPI x86-based PC
Operating System Microsoft Windows Vista Home Premium
OS Service Pack [ TRIAL VERSION ]
Internet Explorer 7.0.6000.16512
DirectX DirectX 10.0
Computer Name PC
User Name PC
Logon Domain [ TRIAL VERSION ]
Date / Time 2007-08-17 / 11:26
Motherboard
CPU Type DualCore Intel Pentium D 830, 3000 MHz (15 x 200)
Motherboard Name Unknown
Motherboard Chipset Intel Lakeport i945P
System Memory [ TRIAL VERSION ]
BIOS Type Award (05/18/05)
Communication Port Printer Port (LPT1)
Display
Video Adapter Standard VGA Graphics Adapter (256 MB)
Video Adapter Standard VGA Graphics Adapter (256 MB)
3D Accelerator nVIDIA GeForce 8500 GT
Monitor Generic PnP Monitor [NoDB] (163416843009)
Multimedia
Audio Adapter Realtek ALC880(D) @ Intel 82801GB ICH7 - High Definition Audio Controller [A-1]
Storage
IDE Controller Intel(R) 82801G (ICH7 Family) Ultra ATA Storage Controllers - 27DF
Storage Controller Intel(R) 82801GR/GH SATA RAID Controller
Storage Controller Microsoft iSCSI Initiator
Floppy Drive Floppy disk drive
Disk Drive Sony UMH-U HS-CF USB Device
Disk Drive Sony UMH-U HS-MS USB Device
Disk Drive Sony UMH-U HS-SD/MMC USB Device
Disk Drive Sony UMH-U HS-XD USB Device
Disk Drive Volume 0 (465 GB, IDE)
Optical Drive HL-DT-ST DVD-ROM GDR8163B ATA Device (16x/52x DVD-ROM)
Optical Drive PIONEER DVD-RW DVR-109 ATA Device (DVD+R9:6x, DVD-R9:6x, DVD+RW:16x/8x, DVD-RW:16x/6x, DVD-ROM:16x, CD:40x/24x/40x DVD+RW/DVD-RW)
SMART Hard Disks Status Unknown
Partitions
C: (NTFS) [ TRIAL VERSION ]
Total Size [ TRIAL VERSION ]
Input
Keyboard HID Keyboard Device
Keyboard Microsoft eHome MCIR 109 Keyboard
Keyboard Microsoft eHome MCIR Keyboard
Keyboard Microsoft eHome Remote Control Keyboard keys
Keyboard Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
Mouse HID-compliant mouse
Mouse HID-compliant mouse
Network
Primary IP Address [ TRIAL VERSION ]
Primary MAC Address
Network Adapter Intel(R) PRO/1000 PM Network Connection (192. [ TRIAL VERSION ])
Modem In-Build Conexant Type 1 modem
Peripherals
Printer Microsoft XPS Document Writer
Printer OKI C5200n
FireWire Controller Texas Instruments TSB43AB23 1394A-2000 OHCI PHY/Link-Layer Controller (PHY: TI TSB43AB23)
Infrared Controller eHome Infrared Receiver (USBCIR)
Infrared Controller Microsoft eHome Infrared Transceiver
USB1 Controller Intel 82801GB ICH7 - USB Universal Host Controller [A-1]
USB1 Controller Intel 82801GB ICH7 - USB Universal Host Controller [A-1]
USB1 Controller Intel 82801GB ICH7 - USB Universal Host Controller [A-1]
USB1 Controller Intel 82801GB ICH7 - USB Universal Host Controller [A-1]
USB2 Controller Intel 82801GB ICH7 - Enhanced USB2 Controller [A-1]
USB Device eHome Infrared Receiver (USBCIR)
USB Device Generic USB Hub
USB Device Sony Memory Card Reader/Writer
USB Device USB Composite Device
USB Device USB Human Interface Device
USB Device USB Human Interface Device
DMI
DMI BIOS Vendor Phoenix Technologies, LTD
DMI BIOS Version 1001
DMI System Manufacturer Sony Corporation
DMI System Product VGC-RA842G
DMI System Version R4850362
DMI System Serial Number [ TRIAL VERSION ]
DMI System UUID [ TRIAL VERSION ]
DMI Motherboard Manufacturer ASUSTek Computer INC.
DMI Motherboard Product P5LP-VX
DMI Motherboard Version
DMI Motherboard Serial Number [ TRIAL VERSION ]
DMI Chassis Manufacturer Sony Corporation
DMI Chassis Version Chassis Version
DMI Chassis Serial Number [ TRIAL VERSION ]
DMI Chassis Asset Tag [ TRIAL VERSION ]
DMI Chassis Type Desktop Case
DMI Total / Free Memory Sockets 4 / 0 -
My IPad is getting hard to charge,I have to wiggly the charger to get it to charge. I've bought a new charger and used difference outlets. I need to know what is wrong?
Consider where you are wriggling the charger (I suspect you mean the cable. Why does everybody refer to a cable as "the charger"?) and make sure all the contacts there are free from pocket fluff and such.
-
How to get exact date and time difference?
Hi,
When i am using the below sql statement:
SELECT (TO_DATE('7/27/2006 05:00:15 PM','MM/DD/YYYY HH:MI:SS PM') - to_Date('7/27/2006 8:30:13 AM','MM/DD/YYYY HH:MI:SS AM')) * 24 hours FROM DUAL;
the output is:
Hours
8.50055555555556
But Actually it is 8.30
So how can i get exact days and time difference between two dates in Oracle?
Thanks....
Regards,
Suman Sakinala
Edited by: SSN on Sep 19, 2008 1:27 AMOr more clearly (this time I have my date_from and date_to the right way around hehe!)
SQL> ed
Wrote file afiedt.buf
1 WITH t as (select TO_DATE('7/27/2006 05:00:15 PM','MM/DD/YYYY HH:MI:SS PM') as dt_to,
2 TO_DATE('7/27/2006 08:30:13 AM','MM/DD/YYYY HH:MI:SS AM') as dt_from FROM DUAL)
3 ,d as (select (dt_to-dt_from)*24 as diff_hrs from t)
4 -- end of dates
5 SELECT TRUNC(diff_hrs) as hours
6 ,TRUNC(((diff_hrs) - TRUNC(diff_hrs))*60) as mins
7 ,TRUNC(((((diff_hrs) - TRUNC(diff_hrs))*60) - TRUNC(((diff_hrs) - TRUNC(diff_hrs))*60))*60) as secs
8* FROM d
SQL> /
HOURS MINS SECS
8 30 2
SQL> -
Frequency response and phase difference
Hi,
I generate "Sine-Swept" with a function generator, which is the input of my device.
Then, I measure the output(vibration) via a photodiod (which is as voltage).
Now, I want to obtain FRF and Phase difference between these two wave (output and input).
In most of the examples, the input and swept has been generated by the software itself, but if the input has been acquired externally and also the swept has been done via a function generator, how would be the FRF?
I have installed "Sound and vibration toolkit", Could you please give me a heads up, that how can I do that?
In advance, I really appreciate your help,
PetarHi,
I attached the project which I've recorded the data from DUTs. Also, I attached 2 snap-shots of the project, in case of the project file couldn't be launched.
I have connected the signal from a function generator to "ACH0" channel, and performed the swept-Freq in the output signal of function generator. (Red graph in 1st chart). Please note that the swept sine wave is generated via the function generator itself...NOT VI
The generated signal by the function generator is the input, which derives the oscillation of a drop,
A photodiode measures the oscillation of the drop via laser-scattering by drop vibration. SO....the signal generated by the photodiode is the "Response"....(white wave in 1st chart)(connected to "Ach1" channel.
Now, I want to obtain FRF, which the input is the signal generated by the function generator, and Response is the output of the photodiod'
As it's seen in the files...the FRF and phase difference is n't what is expected, also the coherence between in and output is zero!
Please help me out with this problem...
Thanks
Petar
Attachments:
12.seproj 419 KB
1.JPG 183 KB
2.JPG 177 KB -
Miro hitting inventory and price difference
Dear All,
I would like to seek advice of the posting during MIRO on point 4 and 5 why there is a hitting on inventory account and price difference of the amount given? How system get the amount in inventory account and price difference account?
Really need advice.
1)
GR - qty 20
dr inventory $1500000
cr GRC $1500000
2) GI - qty 1 and now remained only 19 qty
moving price = $75,000
qty = 19
price unit = 1
value = $1425000
3) MIRO
dr GRC $1500000
cr vendor $1500000
4) MIRO say qty is 21 and amount no change
dr GRC $1571429
cr vendor $1500000
cr inventory $64626
cr price diff $6803
5) MIRO say qty is 20 and amount i enter $1507500
dr GRC $1500000
cr vendor $1507500
dr inventory $7125
dr price diff $375
thanksrefer my remarks in BOLD
4) MIRO say qty is 21 and amount no change
This scenario is not possible as you have taken GR for Qty 20 only.
*still you have added $ 71429 in GRC so this should be uploaded on Inventory ($71429 / 21 = 3401.38) hence Inventory account will get updated with $3401.38 * 19 (available stock) ie $ 64626 & diff of 21 - 19 = 2 * 3401.38 ($6803) will be updated in Price Diff account*
dr GRC $1571429
cr vendor $1500000
cr inventory $64626
cr price diff $6803
5) MIRO say qty is 20 and amount i enter $1507500
* Goods receipt is posted with 1500000 but vendor has presented invoice of 1507500 hence the additional cost ie 7500 has to be loaded on inventory but available inventory is 19 as 1 qty is already issued from stock hence (7500/20 = 375) for 19 qty inventory account will updated with $7125 (375*19) & for material which is already issued prior to taking invoice receipt ie 1 Qty (375 * 1) = 375 will hit to Price Diff Ac.*
dr GRC $1500000
cr vendor $1507500
dr inventory $7125
dr price diff $375 -
Landed costs and price differences
I'm trying to figure out what PS does to adjust for total value discrepancies between an invoice voucher and associated PO. Say on my PO I have a line item with quantity of 2 and unit price of $10. Therefore total value is $20. When I create a voucher, that same line item is now 2x$11 = $22. I approve that voucher for $22. Now I run the Extract Landed Cost batch process. What does this process do to "compensate" for the difference between voucher and PO? Does it change the unit price of that item in inventory from $10 to $11?
Hi, yes you are right: Using this approach ML would use price differences for other batches and increase their value instead of posting them as loss like the initial cost.
The way around that would be to post some unplanned material good receipt for the loss production order, e.g. a material called scrap. In account determination you might make sure that these materials have own stock and price difference accounts that you could treat special in your balance sheet.
This would be shown in ML like a joint production between the planned product and the scrap material and multi-level variances would be distributed using following an apportionment structure from material master.
If it is difficult to maintain a reasonable apportionment structure you might implement BADI cost_split described in note 997264.
Also a good possibility would be to use a quantity-proportional split that can be derived from the ML quantity structure.
I could provide an example implementation of that.
best regards, Udo -
Credit memo - Price and quantity difference on the same PO item
Hello,
When there are both price and quantity differences between the invoice and the PO/GR on the same PO item, we need two lines on the credit memo to adjust the quantity and the price separately. However, the system gives the error message "Document contains same order item more than once" . If we suppress this message, then we have the error saying the debit and credit of the credit memo does not balance, as it appears the system only read the first credit memo line and ignore the second. Does anyone know how to resolve this (without having two different credit memos for the price and quantity differences)?
Thank you.Hi,
Please note the following few points.
1.Credit Memo: Credit memo will be posted when you want to reverse a posted invoice.System will reverse the qty and that much amount of invoice.you can post two line items of MIRO for a sigle PO item for qty and amount.you can not have two lines one for qty and other for amount.
If you feel that there is a differance of posting in amount for the INVOICE and GR (normally for GR , the amount postings witll be same as PO price.) reverse the invoice at MR8M or post a credit memo in a single line for amunt and qty and post afresh the invoice amount .
Regards, -
Dear All,
what is the conceptual and functional difference between peripheral target and Enterprise peripheral target?Does anyone get a chance to see this ?
-
SAP BI Date and Time Difference calculations in DSO Transformation
Hello Guys,
Could you please tell me how to calculate the date and Time difference between 2 fields.
I have 2 date fields :
Arrival Date : 6/16/2007
Departure date : 6/19/2007
Also i have 2 time fields for the above
Arrival Time : 13:00:00
Departure Time : 11:50:00
I want to display all the four fields and 2 fields for the difference in Date and Time.
Is it better to calcuate the differences in DSO Transformation or can you do it in the report itself.Could you please let me know the solution.
Thanks,
BI ConsultantHello Consulant BI,
Computing the difference of two dates is easy (assuming you really just want the number of days). You can simply subtract the two dates using ABAP:
data: w_arrival_date type sy-datum,
w_dep_date type sy-datum,
w_diff type i.
w_arrival_date = <your arrival date field here>.
w_arrival_date = <your departure field here>.
w_diff = w_arrival_date - w_dep_date.
Getting the time difference isn't really much logical. I think what you want instead is to compute the totals days (and extra hours) right? If this is the case, then you can convert the date+time for both the arrival and departure into a timestamp variable first and then t the get difference.
Hope this helps. -
can i trade my 4th generation head phone for the 5th generation and pay difference?
i have warranty if that helpsSorry, but you can not.
B-rock -
Can I use my gift card and two differents device ?
Can I use my gift card and two differents device ?
Yes, you may use both.
Dan K. | Mobile Specialty Stores
Any opinions expressed in this post are those of
the author and do not represent Best Buy Co., Inc. -
Hi all! I need to buy iPad tomorrow. Need your advice which iPad to buy? For almost the same money I can buy iPad 2 + 3g or iPad 4 wireless only. Both of them are 16gb and price difference is 70€ for iPad 4
16GB vs 32GB vs 64GB: Which new iPad storage capacity should you get?
http://www.imore.com/2012/03/08/16gb-32gb-64gb-ipad-capacity/
How much content will fit on my iPod or iPhone?
http://support.apple.com/kb/HT1867
iPad Mini vs. iPad 2 vs. iPad 4: Which iPad Should You Buy?
http://www.padgadget.com/2012/10/25/ipad-mini-vs-ipad-2-vs-ipad-4-which-ipad-sho uld-you-buy/
Cheers, Tom
Maybe you are looking for
-
can I gift a play list to a friend
-
Photoshop CS2: Saved Images Are Too Bright
Hi, I currently have a Photoshop CS2 problem that I need fixed. When I go to save my files as a .PNG, .JPG, or any other file type (minus PSD), the images come out way too bright. But just by looking at the shortcut to the image, it looks exactly the
-
Ok does anyone know of any way to extend the call log feature on the iphone. On my old Blackberry I was able to see who called and when months ago but on the iphone I can not see who called yesterday The reason is that I recieve so many calls in a da
-
PLEASE HELP AND READ. Hi guys, Few months ago a cracked my front glass and display on my Xperia Z2 device. In my country the repair centar don't have display so they can't help( Montenegro) and then in Serbia they can replace the display but I have t
-
The maximum report processing jobs limit configured by your system has been reached.
Hi, We are using Crystal report in ASP.NET (Microsoft .NET 3.5) environment for a number of years but everything went quite well. But recently, we have migrated to .NET 4.5 ,and started having this error. "The maximum report processing jobs limit con