NX8800GT-T2D512E-OC - no clock speeds at all

Greetings from the Netherlands,
I'm the proud owner of an NX8800GT-T2D512E-OC for a month now.
On Windows XP Pro I had no problemens I had no problems overclocking this VGA card.
But now I switched to Windows Vista Home Premium 32bit and my clock speeds disappeared.
GPU-Z, Rivatuner, Powerstrip, ATITool and even the overclocking module from MSI itself doesn't see any clock speeds.
I've tested with the 169.25 drivers from the Nvidia website and the 169.02 drivers from the MSI website.
Can anyone help me?
Thanks in advance

Sorry i linked to the wrong one 174.74, use those 174.74 instead {which basically is the same , except supported VGA's}
http://us.download.nvidia.com/Windows/174.74/174.74_geforce_winvista_32bit_english_beta.exe
Also about Rivatuner, make sure that you are using the latest version 2.08:
http://downloads.guru3d.com/download.php?det=163

Similar Messages

MOVED: NX8800GT-T2D512E-OC - no clock speeds at all

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=115961.0

Sorry i linked to the wrong one 174.74, use those 174.74 instead {which basically is the same , except supported VGA's}
http://us.download.nvidia.com/Windows/174.74/174.74_geforce_winvista_32bit_english_beta.exe
Also about Rivatuner, make sure that you are using the latest version 2.08:
http://downloads.guru3d.com/download.php?det=163

MSI NX8800GTS-T2D512E-OC 675 clock and not 730

Hello,
I've buy an nvidia MSI NX8800GTS-T2D512E-OC.
MSI live bios update tell me that there is no update available. It's 62.92.25.00.04.
with gpuz or rivatuner i see 678/1728/972 and not 730/1825/1944
I'm lost, why two bios edition with two frequency edition ?
see here there is two bios with two different clock settings:
http://www.techpowerup.com/vgabios/5730/MSI.8800GTS.512.080104.html
http://www.techpowerup.com/vgabios/6673/MSI.8800GTS.512.080104_1.html
My second question concern Fan speed that is always at 37-38% and with this my gpu become hot. I use riva tuner to put fan speed to 50%.
is there a bios with auto fan speed increase more than 37-38% ?
thanks

first point;
Unfortunately there are 2 versions of this VGA card so you will get either the 730 or the 678 version
You could flash your card with the 730 bios with the program called Nvflash, but that is risky
I wished MSI would make a bios installer file to give you the option to flash it to 730Mhz again, but Nvidia has forbit the manufacturers to sell overclocked 8800 GTS 512mb cards since some time.
second point;
Regarding your fan speed, you could run the ATI Tool "scan for artifacts" test and GPU-Z to show your fan speed because the fan should spin up to 43-45% when it's getting hotter than 80-85c.

IBook Clock Speed

Hi there
I own an iBook G4 12" 1.33Ghz. Obviously, when the processor speed is set to Highest, it runs at 1.33Ghz.
However, when it's set to Reduced, what is the actual clock speed it changes to? Is there any way to alter this default "reduced" clock speed at all?
Cheers
James

Hi James_W,
Welcome to Apple Discussions
I believe it the reduced processor speed of a 1.33Ghz iBook is 666Mhz found in iBook Developer Note: System Software.
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

[AMD] Highest clock speed with K8N Neo Plat + A64 3200+ Newcastle?

Who owns the exact setup (ram+cpu+mobo) as me and what is the clock speed you all achieved? Mine can only go till 220x11, Ram at 220mhz,
(2.4ghz, DDR440)?

The place I bought my parts from were selling similar ready-built systems with K8N and Geil Value Ram (not Golden) so I thought it would have been fine also (same Antec case and PSU)...
300W and 10A is pretty low for a PSU (mine's only 350W and 16A though) - but your problem sounds very much like my original problem (although worse).
Take a look at Ram that does not work well with MSI K8N:
Quote
angusmcchris: Kingston Value RAM doesn't work so hot. Would have saved me a weekend's worth of horror if I had found this thread earlier. I had to lower the RAM speed down to 166MHz to get it to work, and now its time to go to bed.
Quote
eLeCTR0n: I have a Kingston DDR 400 MHz 512MB card (not the HyperX). I couldnt do anything first when i had it installed in slot 1 running at Max Mem Clock of 200. I couldnt install any OS. i got the blue screen million times and many different ones. Even linux failed to install until i slowed it down to 166 in the BIOS then everything worked fine. Then i wanted to see if i had a defective motherboard or ram card so i bought a PNY DDR 400 512MB ram stik pulged in at 200 and it worked perfectly.
Also look at Ram that works well with MSI K8N for good, compatible RAM...
I can't recommend Crucial Ballistix enough: 2-2-2-8 timings @ 1T on AUTO settings. Never had a single glitch with hours and hours of Doom3, Half Life2, etc...

NX8800GTS-T2D512E-OC not at correct GPU freq.

Got my NX8800GTS-T2D512E-OC today, it's working but using ntune I see that the GPU is not clocked to 730mhz as it should be, but 675mhz..
Anyone have an idea why this is?

Thanks a bunch for your help, sorry I couldn't get back earlier. I've decided to hold off on the BIOS update since I got a reply from the support guys at the store where I bought the card. They told me that running a driver-level overclock to put the card at the intended clock speeds is fine as far as warranty goes, since that's the speed it's supposed to run at. Doing stability tests right now for about an hour and no problems thus far, card temperature stabilizes at just about 80 degrees C without cranking up my case fans so I guess that's happily ever after for me.. (knock wood)
also: holy crap that fan is quiet.. under load like this it's just barely audible over the slight hum of my harddrives, I love this card.
and while I'm still going; what's the recommended max temperature for these GPU's to run at?

Low clock speed with amd 3400+

hi all,
i have an amd 3400+ 64bit and i have downloaded multiple hardware information programs which state that my CPU clock should be between 2.8ghz - 3 ghz with this type of processor, however i only have 2.1 ghz.I have searched the bios and have notice many features are unavilable, i basically cannot change anythings except boot devices and other things that are not usefull to me, my bios does not give the option to change clock speed, or voltage, or bus speed. my current FBS is 201 mhz and my motherboard is MSI k8T800 7010 with phoenix awardbios 6.00pg version 1.14 03/02/04 can any one help me please i would like to get my processor to the correct speed of 3 ghz.

ah right, so it also says the maximum clock speed is 3000 mhz , so with overclocking can my processor achieve this? i have 1 mb of l2 cache.
EDIT what do i do with the bios though because i have a really slow fan that i need to speed up but as i said hardly anything can be done from my bios?!

ST06 Disk I/O, clock speed of CPU's

Hello All,
I want to know how to determine
1.Disk IO-Speed in GByte/h (maximum uncached read speed).
2.Clock speed of the CPU in Giga Hertz.
3. SPAM version(I have no access to SPAM transaction)
The above 2 can be obtained from ST06, but can anybody help me how to determine the maximum Disk I/O speed and the clock speed in Giga Hertz. Sometimes in ST06>Detailed Analysis>HW Info--> CPU, shows clock speed in hertz. How do i convert into Giga hertz.
Regards
Thilip Kumar

Hi there
1000000Hz = 1000Mhz = 1Ghz
Determine the disk speed is not an easy task, it heavily depends on what kind of disk you have. And there is different IO like sequential, random write/read.
You could ask your hardware vendor for some benchmark data. If you only have single disks, then you can google for the data.
A simple test is to copy a large file and mesure the time. If you want to do more extensive tests you can check out [iozone|www.iozone.org].
Best regards
Michael

Quadro 4000 owners - Clock speed at maximum with Premiere or After effects

Hey guys,
I just upgraded my Quadro 2000 to a 4000 (latest driver 311.35, and I'm wondering if all your clock speeds jump to maximum when running premiere or after effects? Even if no editing or playback is going on and GPU load is at 0%? Or do they they throttle down when idle? I'm using GPU-Z to check.
Mine Throttle down once I leave Premiere (or After effects).... just wondering if anyone else is having the same experience. I know they run really hot when the clock pseeds are at maximum.
Also, I do have powermanagement set to "prefer maximum" and I'm using video editng mode for ny base profile.
Salud.

Yeah, nvidia got back to me and saud if you set your powermanagement to 'prefer maximum' any program that access the gpu (hardware acceleration for insrtance), the clock speeds will max out.
Thanks for teh reply!

M30 Centrino clock speed

I have a Satellite Pro M30 notebook and whenever i check the system information, it shows that the clock speed is at 598MHz, whereas the processor should run a 1.5GHz. I have tried using the "always high" option from the BIOS, but that does not change the freqency at all. the notebook is substantailly slower than it would be and it has been like this since i purchased it.
What can I do to fix this problem?
Thank you for your help

Did you buy a new one or already used Notebook?
I ask you this because CPU speed is absolutely too low. It can happen after changing of motherboard because in this case it is necessary to update a special firmware to get the full CPU-speed.
Without this firmware the machine runs at a fixed speed around 600MHz. The best solution is to get in contact with the Toshiba Service partner and ask them if they can check motherboard.
Bye

7970 lightning Be (boost clock speed)

Is their more then one version of the 7970 Lightning BE ?
With different boost clocks ? they all have A boots Clock of 1150 right ?

This card was one that was RMAed to me. Why I had sent this card off too be RMAed i had order Another card. Could not live with out A GPU lol.
Anyhow, when I got the card back I uninstalled my 780ti ran driver sweep and installed the 7970 L BE. And tested it to make sure the card was work as it should, the boost clock ran @ 1150.
I sold the card on ebay.
The buyer is saying the card is only running at 1100 and making A huge issue out of this.
I dont know if he has fliped the bios switch or what.
Can the boost clock run at Different speeds in different systems ?

I5 clock speeds

I have intel_pstate disabled and am using the ondemand governor and my processor doesn't seem to run any slower than 1.6GHz. I also have a laptop that has an i7 (again with intel_pstate disabled and ondemand) and it will run as low as 800MHz. I believe that my laptop has a 2.2GHz chip and I know that my desktop (the i5) has a 3.1GHz chip. Is there a set number of steps that the chip is able to run at, therefore causing the lowest step on the faster chip to be faster than the lowest step on the slower chip? I would like to be able to get my desktop to idle at a slower clock speed. Is there anyway I can do this? According to the wiki, I can set the minimum clock speed in /etc/default/cpupower, but will I run into stability issue if I plug 800MHz into min_freq? Thanks.

WonderWoofy wrote:
The lowest frequency doesn't really matter as much as as how much your processor is able to enter sleep states. So when it is idling, it isn't at the lowest frequency level at all and is hardly using any power.
In reality, unless you are having problems with it, you should really use the intel_pstate driver. The ondemand governor worked well for many years, but was designed for processors over a decade ago. Things have changed and the pstate driver was designed and tailored to work with today's Intel processors. I don't see why you wouldn't take advantage of that if it works correctly for you.
I disabled it as part of some debugging some time ago, and things are actually snappier without it so it got left off. It is a noticeable difference on the laptop, and extends my battery slightly

CPU Clock speed with Belle Update

The original symbian^3 devices run on the ARM 11 Processor which has been optimized to function close to 1GHz. But they're currently running at a speed of 680 MHz. My request to Nokia is that please optimize our processor speed to atleast 1GHz with the upcoming belle update. If you haven't planned on doing it, please do it with a minor update atleast after you release belle. I'm not an expert on this. So suggestion and comments are welcome.
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

bumblebirra wrote:
I would be surprised if the rest of the hardware in the phone, like the RAM etc, couldn't support the maximum CPU clock speed. When such sophisticated electronic devices are designed it's impossible to know until it's all been put together how it will actually perform as a complete unit - the hardware, software, battery capacity, etc. The clock speed allows a fine-tuning once everything comes together, to get the optimal balance.
Well-made software makes a huge difference to how much CPU/hardware resources are required. Software efficiency is the most important factor of all.
A GPU is only there to perform tasks that would otherwise take up huge amounts of CPU resources. Dedicated graphical tasks such as 2D scrolling, 3D texture-mapping/filling for example. But that's all. The CPU is still running the whole show, but just has much of the load taken off it by the GPU.
So with the GPU doing more and more, the CPU and it's speed become less relevant.
A few things here, some of what you have mentioned I agree with. But some I dont. Firstly when any device is designed, things like the GPU and RAM are all allowed for, that is the speed at which each is capable. There is no use taking pot luck saying oh we think that will be enough. Its all calculated right from the word go.
Its done for several reasons, firstly costings, there is no use producing something that is so expensive no will be able to afford it. secondly to make sure you dont end up with bottle necks in data flow. Also it no use producing something that is so slow that you cant do anything worthwhile on it. That is some of the reasons.
You are absolutely right about software, well made software installed in a relatively slow running device can quite often beat poorly designed software running on a fast machine at exactly the same task. O/S like windows for instance, in my opinion only, whilst full of features, is definitely bloated, and not well designed. A standard install disc for windows these days is around the 3Gig mark (depending on version of OS), where as something that does exactly the same thing like Linux still fits on a 700M cd.
And you are right about the GPU, its does relieve the pressure on the cpu. Unfortunately the gpu in an N8 or an E7 is only running at 200Mhz. Considering most things are graphical based on these phones. I would have to wonder how much of the gpu is being used, especially when the one chip is running everything from the 2d/3d graphics/rendering, the camera up to 12MP, HDMI, HD video recording and play back, a stack of video codecs etc.
Unfortunately the main cpu from everything i was able to find is simply listed as an ARM11, these processors run on several Nokia's phone, including the older E90 (which had dual cpu's but ran at much slower speed of about 332 Mhz., however the Arm site list the ARM 11 as several versions, including one that actually has 4 cpu on the one the chip but only presents itself as 1 cpu to the rest of the hardware, with this cpu running anywhere up to 1Ghz. So its entirely possible that the 680Mhz listed for the N8/E7 could be as fast as it goes. Also the current versionof the ARM11 have a power consumption of 0.21mW/Mhz. so based on that figure a processor running at 680Mhz would consume 142.8 mW, but at 1G it would be 210mW, that a difference of 67.2mW. That would mean your phone would go flat a lot quicker. This info is based solely on information that I can find on Nokia run sites, ARM's site and broadcoms site. That way we can beleive what we are able to read with some certainty. I did find other non-related site suggesting 720mhz for the cpu, but they are only a 3rd party mobile news site, that said it had been suggested that it was capable of 720Mhz..
But i do firmly believe with efficient code the phones can perform extremely well, Anna certainly seems faster than the old Symbian ^3 version that was on the phone prior to Anna, whether or not Belle can be made any more efficient remains to be seen. But heres hoping.

Clock speeds

What are memory clock speeds for NX7600GT-TD512 and(or) NX7600GT-TD256? because i couldn`t find them in webpage. i supose core speed 560MHz as for all 7600GT
thanx

Quote from: Nameisis on 05-May-07, 07:16:40
ohh i also want to know if 800 satnd for 1600 couse somwhere was writen that card said it was 1600 Mhz but it realy was 800MHz but couse DDR2 it works like 1600MHz, so i wasn`t to know if MSI`s 800Mhz are better than Palit`s 1400Mhz and Club3d`s 1100MHz
thanx
correction in a my previsional post, its 700Mhz for memory not 800Mhz. e.g spec. again:
NX7600GT-TD512(AGP):
GPU Clock: 560MHz
Memory Clock: 700MHz (1400Mhz effective) DDR3 1.4ns

Trouble with NX8800GT-T2D512E-OC

Hello,
I need you're help !, I just change ma VGA card (7800GT POW) by a new NX8800GT-T2D512E-OC , all works fine if I don't play with 3D game. All trouble come in game, start with some artefact's on the screen and after some time the screen freeze !, and i need to reboot the PC. Some time in world of conflict (for example) i use alt+tab when the screen freeze, go to desktop and go back to the game, works fine 2 or 3 MN and crash !. The fan works fine and the temp are +-75° in game. I tried ati tools and try detect artefact's, after 5 or 7 MN, some withe dot appear on the little picture and the timer restart to 0 ?.
Do you think my card have some trouble ?
So sorry for all error writing, my English is very bad
see my signature for the configuration !
Thanks for all

I have a similar problem. Medal of honor airborne crashes after 1 hour with temps +80° and fan at 90%, battlefield 2 never crashes with 50% on fan temps does not go over 70.
When i scanned for artifacts with atitool it kept restarting for getting artifacts with temps 78-80 and fan at 88%. Then i tried with 100% fan, temps were 75 and no artifacts for 10min.
So i´m pretty sure heat is my problem but shouldn't´t the card be able to handle 100° ??? Mine can only handle 80, i have an aftermarketcooler but i don´t want to install it before i´m 100% sure my card is as it should be. I haven't tried to do a fresh XP installation with fresh drivers an so on, but can that really fix heat stable problems?
[GA-P35-DS4] [E6420 @3200Mhz] [OCZ rev2 DDR2 800Mhz] [MSI 8800GT 660 MHz] [VX922] [WD raptor 36gb] [HD:2,5TB] [PSU:NEOHE 500W]

NX8800GT-T2D512E-OC - no clock speeds at all

Similar Messages

Maybe you are looking for