NXT files (once deleted how to recover?)
Hi,
I am using the brick from LEGO Mindstorms NXT 2.0
I accidentally deleted the file RedData.dat from my NXT, and I need that for one of my programs.
Even when I tell the program to "write to red data file", it does not recreate the file, so I'm left with no data to show.
I am using all three data files, so I cannot simply just switch to another one.
I have also tried telling the NXT to create a new file when it runs the program, called RedData.dat.
What happens when I do this is that I get erratic results. Instead of a nice curve, I get lines that jump all over the place.
I am programming the NXT with NI LabVIEW 2009. The place where I deleted RedData.dat is from the NXT Terminal.
I view the data using the Data Viewer.
Also, I am trying to log motor rotations.
Thanks for your help.
Solved!
Go to Solution.
dluu wrote:
Hi,
I am using the brick from LEGO Mindstorms NXT 2.0
I accidentally deleted the file RedData.dat from my NXT, and I need that for one of my programs.
Even when I tell the program to "write to red data file", it does not recreate the file, so I'm left with no data to show.
I am using all three data files, so I cannot simply just switch to another one.
I have also tried telling the NXT to create a new file when it runs the program, called RedData.dat.
What happens when I do this is that I get erratic results. Instead of a nice curve, I get lines that jump all over the place.
I am programming the NXT with NI LabVIEW 2009. The place where I deleted RedData.dat is from the NXT Terminal.
I view the data using the Data Viewer.
Also, I am trying to log motor rotations.
Thanks for your help.
Do you have the NXT tethered? What happens if you run the code the opposite way? (i.e. if it's tethered, download the code directly and run, if it isn't, try tethering it)
Also, have you made sure to update the firmware on the NXT? What is its version?
Similar Messages
-
Redo log files are deleted, how to recover the database
Hi All,
I removed the redo01.log, redo02.log and redo03.log files of our Oracle database. And it caused the db to fail. Is there any way I can recover the database and startup database in normal mode? I do not need it to have all the latest data restored, I will be happy to just start the db and get going.
database is in arcive log mode.
ThanksHello,
You may try this if the database is mounted:
recover database until cancel;
cancel
alter database open resetlogs;Hope it can help.
Best regards,
Jean-Valentin -
"recovery disk"delete.how to recover again.
apple air Install the dual system (windows and os x 10.7.4) recover disk delete. now i need update mountain lion 。Upgrade is not successful.Suggesting the need recover disk. How to recover “re disk"
Reinstall Lion. That should restore the Recover HD virtual volume.
-
Current archive log got deleted, how to recover using previous archive log?
Hi
My current log sequence #819 and it is got deleted and no choice to get it back and I have previous archived logs with sequences #814 to 818.
When I starting my database it is showing that use 'MUST USE RESETLOGS OR NORESETLOGS option for database open then I used the command
SQL> ALTER DATABASE OPEN RESETLOGS;
ALTER DATABASE OPEN RESETLOGS
ERROR at line 1:
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: 'E:\APP\ADMINISTRATOR\ORADATA\ORCL\SYSTEM01.DBF'
SQL> alter database recover;
alter database recover
ERROR at line 1:
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> alter database recover using backup controlfile;
alter database recover using backup controlfile
ERROR at line 1:
ORA-00279: change 8433746 generated at 01/15/2013 19:51:59 needed for thread 1
ORA-00289: suggestion :
E:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\ORCL\ARCHIVELOG\2013_01_16\O1_MF_1_819_
%U_.ARC
ORA-00280: change 8433746 for thread 1 is in sequence #819
now I don't have the archive log with sequence 819, I have recover from 818. please tell me how to do it?You probably should post to the correct forum too: Recovery Manager (RMAN)
cheers -
Dear Friends ,
I m using Oracle 10g . suddenly , I have to delete one of my datafile(USERS01.DBF) in absent mind.
My database is in NOARCHIVE LOG mode and I have no export or cold backup . When I start my
database then it shows the following error :
SQL> startup
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1296284 bytes
Variable Size 188745828 bytes
Database Buffers 88080384 bytes
Redo Buffers 7090176 bytes
Database mounted.
ORA-01157: cannot identify/lock data file 4 - see DBWR trace file
ORA-01110: data file 4: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\RND\USERS01.DBF'
I m running recover command and it also shows the following error :
SQL> recover database;
ORA-00283: recovery session canceled due to errors
ORA-01110: data file 4: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\RND\USERS01.DBF'
ORA-01157: cannot identify/lock data file 4 - see DBWR trace file
ORA-01110: data file 4: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\RND\USERS01.DBF'
SQL> recover database until cancel;
ORA-00283: recovery session canceled due to errors
ORA-01110: data file 4: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\RND\USERS01.DBF'
ORA-01157: cannot identify/lock data file 4 - see DBWR trace file
ORA-01110: data file 4: 'C:\ORACLE\PRODUCT\10.2.0\ORADATA\RND\USERS01.DBF'
In this moment , Is there any way to recover my datafile ? plz help .. ..Vijay,
Of course you can open your database after creating a new datafile of same. Data of that particular datafile is ever lost.
I guess you mean "ater database create datafile" command right?I don't think that also will work here because that too needs archivelog files to make that new file consistent with rest of the databsae.
Please see here,
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/recoscen003.htm#BRADV224
As OP is in noarchivelog mode, so I don't think he has this option available.
Aman.... -
DB6 - Log files accidentally deleted - How to recreate them?
Hello community,
we found that all DB2 log files of a Solution Manager were manually deleted. The instance was down for some time, so we did not realize the problem immediately, but only now on the restart
We are able to start DB2, but SAP can't connect and this error is reported in the log from the R3trans -d
An I/O error occurred while accessing the database STATE=58030
In the db2diag there are a lot of errors related to missing log file:
RETCODE : ZRC=0x860F000A=-2045837302=SQLO_FNEX "File not found."
DIA8411C A file "S0000016.LOG" could not be found.
There is a procedure to recreate the DB2 log files?
Best Regards,
ValerioHi Valerio,
Without the log files the db does not know what transactions are open and hwat state it is in.
The logs cannot be just recreated.
Do you have any possibility to recover the logs? Could they have been moved to another location or were they completey deleted? Do you have a log mirror path set?
If deleted then you could either restore from your last good backup and restore to the last point where you have logs or you will need to open a message to ask assistance in solving this.
Regards,
Paul -
HT6400 after I updated to IOS 8 some of my files were deleted how do I retrieve them?
updated to IOS 8 and files were lost or did not transfer....how do I retrieve?
Classic has nothing to do with iOS. Use this guide to learn where to post in the future:
http://discussions.apple.com/docs/DOC-2463 -
Zreport deleted How to recover.../
Hi Guys
One of my Zreport is unfortunately deleted & is there any process to recover that as i havent got the last back up also.
Is there any process to get that back from any table.,
Thanx & regardsHi,
If your report has been in a released request order you can reimport this transport.
Otherwise the only solution is to restore the whole database with the obvious side effects...
Good luck
Olivier -
AE CC Plug in deleted how to recover
we deleted the Maxon cineware AE plug in, when we first started using CC, there were some conflicts, no I am wanting to do a tutorial on CD4 and I thought it would have downlaoded again from CC, I have tried to download AE again but doesn't bring back Cineware, any suggestions
Erby2124Reinstall the program.
Mylenium -
Video deleted, how to recover?
can I get a deleted video back?
If you backed up the phone after recording, but before deleting the video, restore it from the backup. If you did not back it up in between, it is gone.
-
Recent laptop crash, (CPU)...I-tunes library was complete...Since have new unit downloaded library..Since have noticed many files missing, un sure but seem to be mostly purchased items, as my 90% of my base music came from home cd's...
Have two 3 i-pods (2) classic and newer version for teenage son...Much more and the missing loaded on units than on my base library...
Is it possible to re/back load my base library transfering my files from these ipods without losing anything more...
If possible, I would require step by step (non assumed) directions as I am nowhere near the most computer/tech savy person in my livingroom, not th block...
As a note I have a 1t seagate external hard drive which i obviously did not do a good/complete job of saving my entire library...
Please help thank youScenario - Please select a file >> Alt+Enter >> See the location of this file as shown in the Information panel. This location is what Organizer catalog looks for when attempting to display the selected file. If the file is not present at this location, it will call it "missing".
Reconnect workflow will help you update Organizer catalog about the changed location of your files. Were you able to reconnect them?
If not, please share a screenshot of the scenario I mentioned above.
Where are these files present on your hard disk? external hard disk? network location?
Thanks
Andaleeb -
How to recover deleted conversation messages in no...
in my nokia x3-00 there is lot of conversation messages , but it deleted ,how to recover those deleted messages in x3 ,anyone help me?
Hi funnyguys,
Welcome to the Nokia Discussion Boards and thanks for posting.
Unfortunately it is not possible to recover conversations or messages once deleted on the phone.
If you have any further questions let us know,
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you! -
How to recover Deleted file from HARD DISK
By mistake my entire AVCHD file of 90 Mts duration was deleted from my Hard Disk, this I realised after a week., in the meantime I have not added or deleted any file from this hard Disk. I had given my this hard disk to my service engineer to recover the video., he has tried and recover some 40 mb file., but I cant open this recovered video file in Premiere or any other video convertor programme., also I cant get any information about Video.
Can anybody in the forum help me and suggest how to recover my deleted Video from the Hard diskHi, hard disk data loss is actually a hard task for many users 'cause most of them think this kind of problems is a complicated situation. Here are some tips you need to know after data loss happened.
1. If you meet the file loss situation, keep calm and stop using your computer to do any read or write operation until you find the way to recover the lost files because any wrong operation.
2. If you've lost a file, time is of the essence. As new files saved to Mac hard drive or storage devices, the original files gets overwritten. So do not use the drive or disk which your deleted files are stored before at all, until you have completed the scanning and recovery process.
3. The system crashed or the files loss situation happens occasionally, so remember build a backup for the files periodically is strongly needed.
4. If you meet the file loss situation again, stop using the Mac or storage device right now, use another computer to process the files recovery.
5. Remember this, no matter at the normal time or after files recovery, build a backup for the files periodically is the best method to protect your files from data loss situation.
This post offers you more tips you may need: http://www.uflysoft.com/data-recovery-mac/mac-files-recovery.html -
Undo deleted photo, how to recover a deleted file in iPad mini
how to undo deleted photo? how to recover a deleted file in iPad mini?
Unfortunately you can't. Except if you made a back up of your iPad on iTunes, restore it with the last save.
Hope I helped -
How to recover the database when some of the archive log file get deleted.
I am facing a problem with Oracle database, which is related to archivelogs.
Our development database is running in archivelog mode, but we don't have backups scheduled and have no recovery catalog.
When the database was in running condition, disk got full, so some archivelogs were deleted manually.
After this they restarted the DB, and now DB is not coming up. Errors are as follows:
SQL> startup
ORACLE instance started.
Total System Global Area 1444383504 bytes
Fixed Size 731920 bytes
Variable Size 486539264 bytes
Database Buffers 956301312 bytes
Redo Buffers 811008 bytes
Database mounted.
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;
alter database open resetlogs
ERROR at line 1:
ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
SQL> recover datafile '/export/home/oracle/dev/ADVFRW/ADVFRW.system'
ORA-00283: recovery session canceled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
SQL> recover database using backup controlfile;
ORA-00279: change 215548705 generated at 09/02/2008 17:06:10 needed for thread
1
ORA-00289: suggestion :
/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
ORA-00280: change 215548705 for thread 1 is in sequence #1107
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC
ORA-00308: cannot open archived log
'/export/home/oracle/dev/ADVFRW/ADVFRW.archivelog1/LOG_ADVFRW_1107_1.ARC'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
CANCEL
Media recovery cancelled.
SQL>
1. How to recover the database and bring it online
Any help will be highly appreciated.
With Regards
Hemant Joshi
Edited by: hem_Kec on Sep 7, 2008 9:07 AMHi,
Archive log files are the copies of redolog files.As redo log files are circularly overwritten,oracle generates archive log file of the corresponding redo logfiles being overwritten.So if you have a backup that dates back to 10 am in the morning and if your database creashed at 3 pm,you cannot use the redo log files alone as they have incomplete information.To completely recover the database upto 3 pm,you need archive log files generated between 10 am to 3 pm. In your case since you are missing one archive log file,you cannot perform complete recovery and hence would suffer data loss.
Maybe you are looking for
-
Just downloaded the latest version of iTunes - iTunes 11.1.0.126. Even though I was already subscribed to all of my podcasts, there was a new Subscribe button next to each one. So, I clicked them. Now, every podcast in my list view is populated by ev
-
Error while saving workbook or query
Hi guys. After upgrade to 7.0 we are experiencing error while saving workbook or query. We are using BEx 3.5. Here is the error: "Program error in class SAPMSSY1 method: UNCAUGHT_EXEPTION. An exeption with the type CX_SY_PROGRAM_NOT_FOUND occured, bu
-
Error "602" System error: AK Datapart too short
Hi all, Ok, I have looked just about everywhere for an answer to this but to no avail...I even tried under a few rocks we have laying around. Anyway here it is: While running a compression in BW we get Error "602" System error: AK Datapart too short
-
No sound through HDMI on GX630
Hello! I have GX630. When I connected it with my LCD TV via HDMI, I've got video, but not sound. HDMI is checked as prefered device and Win7 shows that sound is working. Can you help me?
-
DVI out port output @ 1920x1080?
I have a 15" macbook pro (2nd gen i believe, it has the full aluminum casing and touchpad supports gestures). I was wondering if the DVI Out supports up to 1920x1080 resolution (without any scaling, ect.)? I was looking to buy a 1920x1080 native LCD