Ny device is not being detected while i try to connect to itunes

i am an iphone4 user.... its been with me for nearly 1yr and 6 months....lately its asking for registration and when i''m trying to do it the device is not being recognised in itunes and the registration fails... what can i do about this...

Make sure u dont have a clone.

Similar Messages

  • Optical drive drivers not being detected while installing windows 7 via bootcamp

    I'm trying to install Windows 7 using boot camp but I keep running into a dead end that I have no idea how to fix.  I have my boot camp partition, and then I load up my install dvd and using BC assistant I click the Start Installation.  The machine restarts, and I get as far as the screen with the blue backgroun and the tiny green plant,  that has "install now" prominantly in the center, and below and to the left two options for "What to know before installing windows" and "Repair your computer".  I click install now and it goes to the "Setup is starting..."  Then I got an error winow that says "A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now." "Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step."    And I have the option to browse, or rescan for drivers.  The problem is I can't find any drivers for my machines optical drive OR the boot camp support drivers. I have my Origianl OSX Install disc, but dont know where to look for the drivers since I now apparently have to install them manually.  Any advice on this would be super appreciated as I've been trying to get this working for like a week :\  Specs Below.
    I'm running a 15 inch Macbook Pro 5,3 Mac OS X 10.6.  Intel Core 2 Duo 8gb ram boot rom version mbp53.00ac.b03, optical: matshita uj-868
    If any other info would help solve my problem let me know and if reasonalbe I will provide. Thanks!

    Sorry I didn't respond sooner....Hurricane Irene knocked out all our power
    The initial install (at least for most of the reboots) does correctly reboot to Windows. However, towards the end of the Windows setup, where Windows is fully functional but is configuring itself, you may accidentally boot into OS X. Once you get Apple's Boot Camp drivers installed, you can set the target disk for a reboot, so that you don't need to hold down alt/option. In addition, you can also set the target disk in Lion via System_Preferences>System>Startup_Disk.
    Unfortunately, the excellent boot manager rEFIt doesn't work with Lion (because of the hidden partition that Lion adds). Maybe they'll get it working soon, then you can use it and not worry about holding down alt all the time.

  • IPhone will only power on while connected to the power cable and will not power on if I try to connect to iTunes/PC. I tried resetting and switching power off. What should I do?

    Can someone help?

    If resetting and restoring didn't fix it, you need to bring it to an Apple store to be evaluated. Sounds like the battery may have died.
    ~Lyssa

  • My iPhone is not being detected on my laptop itunes. How do I get it to appear under devices?

    My iPhone is not being detected on my laptop itunes. How do I get it to appear under devices?

    iPhone, iPad, or iPod touch not appearing in iTunes

  • HT1925 I cannot seem to delete apple soft ware from C/: program files/ common files...apple. It says I need permission, while I am the administrator. This seems to be interferring with my reinstallation of itunes. Currently my devices are not being recogn

    I have been trying to remove all residual apple files from my computer in order to fully reinstall iTunes. My devices are not being recognized by iTunes currently. I keep finding an Apple file under C/: Program files/ common files/ ......Apple.. under that there is an Internet Services file folder.. I am the administrator and yet it says I need permission to remove these files.
    Please advise.

    See Troubleshooting issues with iTunes for Windows updates for some tips on cleaning up... Unlocker might be the tool in this case.
    tt2

  • Phone not being detected on laptop

    hi , well my phone is not being detected, i made assure that the usb cable is alright, usb port is not 3.0 and is fine good and is among working ports, after trying so much i changed pc , cable but the phone still remains same undetected, wherein if i restart my phone it shows installing mtp drivers and shows symbol to have patience post which it shows error,it is behaving this way only after the update to kitkat i guess, because before that it was alright.suggestions appreciated and thanks in advance
    Solved!
    Go to Solution.

    To solve the issue, open Device Manager on your computer to reinstall the driver for your device while your device is connected with your PC via a USB cable.
    Microsoft Windows Vista and 7 users
    To open Device manager on your computer
    Click on the Start button. 
    In the Search box, type device manager, and then press enter. 
    To reinstall the drivers for your device
    Scroll down to the Universal Serial Bus controllers (USB section) of the Device Manager window. 
    Look for an MTP Device: Media Device, Unknown Device or any other reference to your phone. Click on this entry and choose "Uninstall" whilst leaving the device connected. 
    Wait a few minutes, and the computer will reinstall the drivers for the device.
    Now, the phone is accessible via Computer/My Computer on your computer.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • My Ipod Nano 5th generation is not being detected by Widows and Itunes. I have tried everything based on the trouble shooting tips outlined. Has anyone had this situation before? How was it resolved. My Ipod is just out of warrenty

    Have done all trouble shooting tech a through Apples and still have not resolved issues on Windows and itunes not detecting my Ipod  nano 5th generation device. Tried restoring the device manually using disk mode and still not being detected by the computer. Device is our of warenty as when service repair charges are $125.00 dolars more than I paid for this device. There must be some way to restore the entire device to factor settings without having to be connected to itunes and Windows. I wish I could connect but again device is not being read. I have another Ipod that is 8GB instaed of 16GB and it works fine. The sad thing about this situation is that my 9year old daughter worked hard doing delivering fliers for a long time to save her money to buy this 16 GB 5th generation Nano. Otherwise the Ipod works well but will not syncronize songs as it is not being detected. Maybe this is a result of corrupt files that got onto my daughters Ipod somehow and thus causing it not the be detwected through the USB connection thus as a result not be understoud as a working device through Windows and itunes. If anyone can help me out there including itune techs that would be well appreciated, but for now my daughter is not able to add new or delete any songs on her ipod as well pictures, and everything. Thanks

    Try changing the cord. I could NOT get my computer to recognize my iPod 5th Gen until I read somewhere that different apple devices use different cords. I was inadvertently using my iPad cord and that caused my computer to not recognize my ipod.

  • Ipod 4g 32G not turning on, not charging (on multiple cords, both comp and wall, 4 20min), not being detected by Itunes or Windows 7 64bit OS, will not reset, tried taking it out of "DFU", NO DMG, Itunes up2date, All I'm getting is a blank black scrn

    Ipod Touch 4th generation 32G not turning on, not charging.
    I have used multiple cords on both computer USB and wall USB converters. I let it sit there for over 20 min with each attempt.
    It is not being detected by Itunes or my Windows 7 64bit OS. I have tried all 4 of my USB ports (both USB 2.0 and 3.0), with 3 different chargers.
    Holding home and power button will not reset.
    Tried taking it out of "DFU" mode but Itunes won't detect it, I didn't think that would work anyway.
    NO DAMAGE, I have been very careful with it, aside from a few minor scratches. (that you can't even see unless the light reflects them)
    My Itunes is up to date, as is my OS.
    All I'm getting is a blank black screen. It has been working fine on this computer before. I have no idea what could have happened. I'm at my wits end here.

    See if you missed anything here:
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Hp v235r flash drive not being detected on my computer

    Hi,
    I am using hp v235r flash drive for more than 5 years. It's not being detected on my computer since two days. Can any one solve my problem, as there is lot of important data stored in it and hasn't been backed up recently.

    Hello budda48,
    Its possible the driver for the pen drive is corrupted in your computer, or the drive has met its end of life.
    First, confirm that the Pen Drive is seen by other computers. Plug it in to another computer that you havent tried yet.
    If it is not working on other computers, then the usb drive is corrupted and there wont be anything else we can do.
    If it is working in other computers, then try these steps to troubleshoot the Pen Drive.
    Confirm that the port on the computer is not bad. Choose a different port to insert the drive. Next…
    Part 1: Make sure that the drive has a drive letter assigned in Disk Management.
    Open Computer Management by right clicking on Computer and clicking Manage.
    Click on Disk Management. Give it a moment to open the view of the drives installed.
    Look for a drive that does not have an assigned drive letter and is not labeled as System Reserved.
    Note: System reserved drives are reserved by Windows and will not allow you to assign a letter.
    Right-click the unlabeled drive and click Change drive letter and paths…
    Click Add and then click OK to select the first available drive letter.
    If the Change drive letter and paths… option is not available, make sure that the drive is Online.
    If the drive is Offline, right-click the disk number and click Online.
    Part 2: If the drive does have a letter assigned and it still does not work, uninstall the driver.
    You can safely remove any usb drivers that are not in use (hidden drivers). Devices that get plugged in later will simply reinstall its needed driver again.
    Remove the pen drive from the computer if it’s attached.
    Right click Computer and click on Properties. In the System window on the left side, click on Advanced System Properties.
    Choose the Advanced tab and click on Environment Variables… button at the bottom.
    Under System Variables, click on the New… button
    Type this in the box that pops up. Variable Name: devmgr_show_nonpresent_devices and also give the Variable Value: 1
    Click OK on all the open windows to close them out.
    Go to Computer Management again and click on Device Manager. Go to View at the top of the window and click on Show Hidden Devices.
    Click on the drop down arrow for Universal Serial Bus Controllers to open the list. Look for any USB Mass Storage Device that is hidden (greyed out) and delete it. There may be several and it’s ok to delete all those hidden USB Mass Storage Devices.
    When you connect the pen drive to the computer again, give it a minute to reinstall the driver.

  • HT203128 My iPad is not being detected by iTunes after I updated to the latest version of iTunes.  What should I do?

    After updating to the new version of iTunes, my iPad 2 is not being detected when I tried to sync.  Any solutions?

    A few things to try. Any one or a combo mayhelp
    Reset your iPad.
    Hold down the sleep and home keys for about 20 seconds. Then plug it back in and see if it is seen now.
    Try a different USB port
    Reboot your computer
    If you have a PC:
    If that doesn't fix it, go into the control panel, add/remove programs. Uninstall iTunes, apple Mobile device service, apple application support.
    Then redownload and reinstall iTunes. then try again.

  • Iphone 4s not being detected by windows 8 laptop and itunes

    Hey all,
    My iphone 4s is stuck in recovery mode and my laptop is not detecting the iphone when i plug it in. I plug in my other iphone and ipods fine but this iphone 4s is not being detected so i know it is not the cables. I have uninstalled all of the apple apps and drivers from my computer including itunes and re-installed them again and still nothing. When i turn on the iphone it shows a blue itunes logo with a cable indicating for me to connect it to my laptop, but it turns off after 30 seconds which doesn't allow it to restore thus a notification shows up on itunes saying that the iphone could not be found.
    I downloaded the latest version of ios, but could not install it since the iphone is not responding. so right now it is basically a paper weight.
    Is there anything i can do?
    thanks all....

    Hello Bethany2
    Try creating a different user for your computer and open iTunes to see if shows up in that newly created user. The article below will home a few more troubleshooting steps, some of which you have already tried.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    -Norm G.

  • Ipad 4 ios6.1 not being detected on itunes through wifi.

    Hey guys, i don't know what's effing problem is with the itunes??
    i have enabled the wifi sync option though, still my ipad is not being detected on the itunes.
    Once in a while i restarted my ipad and then the ipad was detected. I transferred some of the files and then closed the itunes. After a while i opened the software again and got the same issue..
    please help.
    Thanks

    you have to make sure both your wifi router and the computers firewall are not blocking the ports used for wifi sync with itunes

  • HT4061 my iPhone unexpectedly shut down and now is not turning back on, charging and is not being detected by my laptop, help

    my iPhone unexpectedly shut down and now is not turning back on, charging and is not being detected by my laptop, help

    i put that i held down the home button and all that... sorry, should of made my message a little clearer hun.. but i did try that, ive been searching video's on the net trying to figure out how to fix the problem, but nothing seems to be working... ive just tried pluging the usb lead into my phone while holding the home button then connecting it to my computer to see if itunes fires up, but even that didnt work... i dont know what else to try.

  • HT4137 my ipad is not being detected on itunes or my computer what do i do?

    my ipad is not being detected on itunes or my computer what do i do? like the homescreen on the ipad says to connect to itunes and won't go to a different screen I just want to reset the whole thing without using my computer how do I do that or is there another solution

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    If iPad appears as camera:
    See 1st link above.
    iOS: Disabling digital camera notification in Mac OS X
    http://support.apple.com/kb/TS1501
    iOS: Disabling digital camera notification in Windows
    http://support.apple.com/kb/TS1500
     Cheers, Tom

  • My built-in webcam is not being detected by CyberLink Youcam

    My built-in webcam is not being detected by CyberLink Youcam (webcam) Pavilion dv6-6c10us

    Hello,
    I see that you're having an issue with the webcam in the notebook. If you could, please check and see if the webcam is listed in the device manager. If you don't know how to check for that, you can follow step 1. 
    Now, if you can't seem to find it listed in the device manager it could be that the webcam may have become unplugged internally and requires service. It could be a faulty webcam module which is not been recognized. I suspect you might have to send the Notebook in for a warranty repair to get it fixed. Now, if that's the case after following the steps below you will need to call HP@8004746836 and see what options they have to replace or repair the notebook. 
    Also, you can follow these steps to try and resolve the issue. 
    Steps:
    Please follow this document which will guide you through a couple of steps on how to resolve this issue you're having. 
    The document should something like this:
    First, try this steps that's circled. 
    If the first steps doesn't seem to resolve the issue go ahead and follow the next step below. 
    The first section "Video does not appear in your webcam software (such as YouCam, Skype, Messenger, etc.)" will guide you through a couple of trouble shooting steps to get the webcam to work within these programs. 
    If the first step doesn't resolve the issue please go to step #2 "Reinstalling the original webcam program that came with your computer”. This section will guide you through recovering the webcam software and drivers. This is the most important steps in the document if nothing before this resolves the issue. 
    It should look something like this:
    Once you have finished both steps please let me know the outcome. If you have any more questions please ask. 
    THX

Maybe you are looking for

  • Report output sending as an attachement through mail

    we are facing one problem while sending report output as an attachement to specific mail-ids. Every thing is working fine.But for each row upto 255 characteers only it is printig. Remaining is not comming. We are using  Function Module  SO_DOCUMENT_S

  • Error message url not supported by file

    When I'm on the internet, I randomly get an error message that reads 'url not supported by file:' What does this mean? Okay, just read other comments on this and I shut off my Time Machine for now - hopefully this works.  Thanks

  • N6030 Searching for contact by name to send messag...

    I used to be able to search for the contact by name to send a message. Now a 123 icon appears top left and the keypad only accepts numbers for the search. Any ideas about how to turn it back to letters? Thanks in anticipation for your help.

  • Lexmark x7170 not scanning under 10.8.2

    Hi there, I have the latest driver 11.1 for the Lexmark x7170, which is connected via USB, installed. It prints but will not do a scan. How to fix this? Thanks for Feedback Bernd

  • Config guidance HWIC-AP-G-A and CP72921Gs with2811

    Hi all , newbie here i am trying to set up a 2811 which will act as a wireless router with ap card and have nm-cue installed for voicemail etc ..for outgoing i would like one going number ( vic-fxo ) and one sip option .. still working on details ..c