NY07 Metro Commuter Tax Set up
Hello
We are trying to setup some Employees with the NY Metro Tax NY07. They already have New York CIty tax (NY01)and we cannot enter the metro tax for them.
One lives in CT and has that for his 207 record and NY city tax for his 208.
We tried entering them under 234, but it is not working.
T5UTZ
T5UTD
Tables are configured for NY07
For NY07 when we are maintaining the Tax Witholding no taxation takes place and here is the BSI Message we are obtaining:
(NY07 Tax type 19 is maintained in T5UTI),Can any body help me on this ,Do we have to configure NY07 for It 207 an d IT 208
Thnaks in Advance
Sree
Hello Sree,
The new taxes are work taxes and only need to be added to infotype 208
for employees that work in these counties.
This will work for you. IT0208 should have only NY, NY07 for an example.
Table T5UTZ and T5UTD are Delivery Class C tables, which means that SAP
only delivers the data in client 000 and it is up to the customer to
the data to the non-zero client if they desire.
You need to cassade the data from client 000 to the non-zero client.
To cascade these type of tables in your system, you can use transaction
SM30 to compare and adjust the entries as needed. Please reference the
the end of SAP Note No. 363453 - "DOC: TUB Transport, Consulting Note"
for how it is done with TUBS.
Regards,
Manny
Similar Messages
-
Hi
What list of activity to do for france and germany tax set up(for FI,SD,MM).
Thanks in advanceHello Sree,
The new taxes are work taxes and only need to be added to infotype 208
for employees that work in these counties.
This will work for you. IT0208 should have only NY, NY07 for an example.
Table T5UTZ and T5UTD are Delivery Class C tables, which means that SAP
only delivers the data in client 000 and it is up to the customer to
the data to the non-zero client if they desire.
You need to cassade the data from client 000 to the non-zero client.
To cascade these type of tables in your system, you can use transaction
SM30 to compare and adjust the entries as needed. Please reference the
the end of SAP Note No. 363453 - "DOC: TUB Transport, Consulting Note"
for how it is done with TUBS.
Regards,
Manny -
WHAT IS TOTAL TAXES SET-OFF ?
Dear All ,
i m in display mode of a P.O here at item level in condition tab here JMOP =16% of 50,000 base price is 1,000INR & qty is 50, is 8,000inr , JEC1 is 2 % of 8,000 is 160.00inr , & 1% of 160 is 80.00inr , but here total taxes set off is calculated as 164.80, im not geting how this 164.80 is calculated , can ne one help me out.
sap11
Edited by: sap11 on Apr 9, 2008 12:09 PMmy [probl;em is solved as i was confuse actually this 164.80 for 1 qty is the total of JMOPJEC1JSEP & for 50 pcs it is 58,240 so i have divided 8240 by 50 hence the total set off for 1 pc is 164.80.
sap11 -
We are implementing OAB (from OSB). In OSB we have the pre and post tax elections done at the plan level -
For example, select:
Plan - Dental Plan Pre Tax
Option - Employee
In OAB we are considering setting pre and post tax at the option level -
For example, select:
Plan - Dental Plan
Option - Employee Pre Tax
Is there a difference between the two and does it matter which route we choose? I assume the only difference would be what the employee would see in self service (with the first way they see more plans and fewer options and with the second way they see less plans and more options). Or are we missing something?
Curious to know how others have their plans and options set up.I'm not familiar with US Payroll, but if you look at the Model WTs for Country Code 10 (in V_512W_D) you should be able to find WT Models BA31, BE31, BP31, BR31, BT40 and M730 (I may have missed some). Pre-Tax and Post-Tax setting could be Processing Class 65, but you should check the online documentation (help.sap.com or scn.sap.com/wiki) to confirm.
The IRS should be the source of information regarding US 401K plans, but you can also find information on Wikipedia (and elsewhere on the web).
As for where to do the configuration and which Infotype to maintain, I would presume that it depends on the Company's 401K Plan (Employee Deduction only or Employee+Employer Contributions), who manages it, and so on.
As I mentioned in your initial thread, please start by reading a little on the subject, such as
Saving Plans - ERP Human Capital Management - SCN Wiki -
can you please tell me whats mean by tax set off ( service tax,vat, cst). like is it a payable value or payed value
Hi
Review notes 779512 and 778976
with kind regards
Cora -
Tax setting in Extended Classic Scenario
I am using SRM 5.5, ECS, ECC 6.0, VERTEX for Tax in ECC (Tax calculation occurs in the backend) and completed the following config steps
1) Set the default to "Tax Calculation occurs in the backend"
2) Entered the same tax codes as in backend (I0, I1 and U1)
3) Even maintained the Assign EBP Tax code to FI system"
4) Completed all the tax settings in ECC
If I create a PO directly in ECC, its calculating the taxes. The problem I see is sending the tax code in the PO to ECC, I am getting the following errors if I select I1 or U1 as tax code in the line item of the SC
"Jurisdiction code could not be determined
"Not possible to calculate tax
Please give me any ideas to fix this.
Thanks in Advance,
CDHi
<b>Configuarion is missing in this case.</b>
Please maintain data in the following tables in SRM side, similar to what is maintained in R/3.. In order to go ahead further.
<b>The main tables are as follows ->
BBP_TAX Tax Codes for Enterprise Buyer
BBP_TAXT Enterprise Buyer: Tax Code Description
BBP_MAP_TAX_CODE ( Assign Enterprise Buyer Tax Code to FI System )
BBP_DET_TAX_CODE ( Tax Code Determination )</b>
Hope this will help.
Pls reward suitable points.
Regards
- Atul -
Classic withholding tax set-up
Hi Gurus,
I need your help in configuring the 1042 withholding set-up using classic withholding. Our requireemnt is to withhold tax amounts at the time of payment and the tax rate depends on if there is any treaty between the US and the country where vendor is located. if there is no treaty, the tax rate will be 30%. There are different countries where vendors are located.
I have defined tax codes with tax rates as 5%, 10%, and 30% for the US in classic witholding. I have also assigned a tax GL account to post the tax amount. When I post an invoice and make payment, the amount gets posted to the tax account but I cannot print the tax certificate using report S_P00_07000134. I am not very clear on if my configuration is correct. can someone please help me with the following questions:
1. Do I need to define tax codes for each country where vendors are located? My set-up only has such codes for the US.
2. Do I need to define any formulas for tax calculation? At present, I have not defind any formula. I have specified tax rate for each tax code.
3. What are the steps to configure tax form printing for 1042 forms for the US?
I really appreciate your help.
Thanks,
Best Regards,
ShaluHi Ram,
Sorry for the late reply with solution.
There is only one TDS tax code (Classic) field is available in Vendor Master. Please note that multiple tax codes can be entered for different categories in Extended Witholding Tax (EWT).
Please create whatever tax codes you require. Take the following example:
Your total Invoice amount as 20,000 and the
cost of parts is 10,000
cost of services is 10,000
If you have entered other tax code for this Vendor in Vendor Master, you can do the following method.
After entering the Header Text and GR selection, you can move the next field for Withholding TAx & system shows the existing tax code. Select & Change the tax code at transaction level through F4. Also enter 10,000 only in the base value then tax calculations are done for 10,000 only based on the selected tax code.
Try this in Dev (if you have) Server if not, please give the results. -
Der experts !
I enabled withholding tax management in General Settings and in Item master data. Also I defined a withholding tax.
When trying to enter a tax, on a AP invoice, the fields 'WTax Liable' displays 'No' and it is unchangeable ('Yes' is no longer avalilable here). How can I do to change this field to 'Yes' such that the amount of tax is displayed on the document footer (field 'WTax Amount')?
Please help me solve this problem.Hello Yves Ngom,
Check in the BP Master Data whether for the particular BP U have set the withholding tax and selected the a withholding tax code as default. Further now check under the row level of the invoice for the withholding tax field and select 'Yes' from drop down.
Further Check in G/L Determination under Purchase & Sales Tab.
Regards:Balaji -
Hi Friends,
Please suggest how to set item wise tax and the tables used
Regards
Manju M GHi Vasu Natari,
Yes,i am asking the same with sdk.I want to know to which tables that details are stored.
Regards,
Manju MG -
How is tax set in MM purchasing?
can anyone please explain how tax is set in MM purchasing?
Hi
Tax code is created in T.code FTXP, Under the country key.
Tax code is assigned in the PO in the PO Line item in the Invoice tab.
More details in link provided
http://help.sap.com/saphelp_47x200/helpdata/en/4c/e13438b55ced0ce10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/e5/077d5c4acd11d182b90000e829fbfe/frameset.htm
Award points if useful
Thanks & Regards
Kishore -
Hi experts
I want to assign different series number of documents for different location of a company like invoice from delhi location series should start form 100 and for mumbai series should start from 500. Can I use Sequence in Administration-Setup-Tax . It ask series number but does not work. Plz help me.Hi Jitender,
Refer/study Administration/System Initialisation/Document Numbering.
Hope it helps
BR
Samir Gandhi
Edited by: Samir Gandhi on Dec 15, 2008 6:10 PM -
How to assign service tax and VAT to dip profile.
Hi
<b>Configuarion is missing in this case.</b>
Please maintain data in the following tables in SRM side, similar to what is maintained in R/3.. In order to go ahead further.
<b>The main tables are as follows ->
BBP_TAX Tax Codes for Enterprise Buyer
BBP_TAXT Enterprise Buyer: Tax Code Description
BBP_MAP_TAX_CODE ( Assign Enterprise Buyer Tax Code to FI System )
BBP_DET_TAX_CODE ( Tax Code Determination )</b>
Hope this will help.
Pls reward suitable points.
Regards
- Atul -
Hi,
If you want point please give me the solution for question below:
IMG WHT guide says:
"If you decided on extended withholding tax and activate this procedure, you must migrate your master data and transaction data. You cannot then return to the original withholding tax procedure afterwards."
What this actually mean? Is it possible to assign WHT tax code in transaction FB60 enter vendor invoice? Can I have WHT reduced and posted with VAT when I am entering vendor invoice transaction FB60?
Please help me, I will give good points for good answer.
rgs.MarkkuHi,
You question is little bit confusion to me.
According to my understand in FB60 see the withholding tax tab there u can manually specify the amounts.
Hope this is clear, if yes points,
Regards,
Sankar -
Problem setting up Tax for R12 Internet Expenses
I am using Oracle R12 and am in the process on configuring Internet Expenses and have come across an issue with the tax set up. My issue is that I have created new tax rates in the Tax Manager responsibility for internet expenses (i have enabled the Internet Expenses check box when defining this new rate) and have assigned these rates to items in the Expense Templates. I have also enabled the profile option OIE: Enable Tax profile however when I create an expense report and it is imported into Payables the expense report does not populate with the tax code that I configured in the expense template. The tax code that is being populated is the default defined against the country code which is incorrect. Does anyone have any ideas how I can get the expense report to import with the correct tax code that is populated against the item in the expense template? Thanks
Log into tax manager
navigation: default and controls --->application tax options , in the application name, select internet expenses
this where you tell the system to pick up tax from, depending on your set up, the tax gets defaulted
so you need to define the hierarchy and if you want tax to default from you expense template you need to stipulate that in the set up
Regards -
Setting up new taxes in US in TAXUSJ - to handle federal excise tax
Hi - We use SAP standard US tax setting using jurisdiction code.
We have a new type of taxes - we need to set up - Federal excise taxes. This is only applicable for some materials. We will post document from SD. We are setting a new condition type and SD for posting this taxes.
We are planning to create the same condition in Fi in tax setting and modifying the tax procdure?
Does anybody have any experience on
1. Can TAXUSJ be modified to cater for new taxes? Is there any problem or concern in modifying this procedure?
2 Setting up additional taxes in the system for some item which are in addition to standard tax type in US which are in addition to standard input and output tax?
3. Does anybody have any experience from SD side as to what setting needs to be done and what changes to be done to post tax in the system from SD side?
4. Do we need to set up a new tax code? Any other way than handling as tax code?
5. Any experience where you have used multiple taxes on the same item? Item subject to output tax as well as additional tax)
Thanks
SajalHi Could you please explain me in little detail.
Thank you
masthan
Maybe you are looking for
-
So can you stram google video into your iWeb page and make it full screen?
-
Email link to folder on shared volume
There's probably a really easy answer to this one but I just can't find it... so please be a hero and help me out! I need to email a link to a folder on a shared volume to a colleague, showing him where I've put a particular file. How do I do this ea
-
I did not realize Iife was already on the new mac, and installed I life from a disk. Now Iphoto has a circle with a slash, when trying to open is says (you can open iPhoto because is may be damaged or incomplete. ?
-
Error when create JLabel with ImageIcon from server
Hi! When I run applet that contain JLabel(String, ImageIcon, int) from server I get follow error: "java.security.AccessControlException: access denied (java.io.FilePermission middle-1.gif read)". .gif-file and .class-file are located in the same dire
-
HELP! Can Not Accept Images from Mac to Windows - ...
Last week I updated my Skype to Apple Mac Version 7.2 (412) (latest Version) and all of a sudden a few of my employees could not accept image files from me. Its telling them "the photo is unavailable" Ive used Skype with them for 7 years and this is