O.O.P.S. (out-of-phase-stereo) in SoundBooth CS4?

Is it possible to turn regular / standard audio files into O.O.P.S. versions (.wav, etc.) with SoundBooth CS4? No pressing need, but O.O.P.S. versions of Beatles songs are often interesting.
I've checked the manual, Lynda.com, general Googling, with no success.
Thanks.
Bill

Thanks for the info. I downloaded the app, then found directions at http://www.stevehoffman.tv/forums/archive/index.php/t-168346.html .
Now all I need is the time to fiddle with it.
Bill

Similar Messages

  • Audio signal out of phase

    When i connect itunes to my stereo via the airport express the left and right channels become out of phase and I loose anything panned down the centre. I know that it is not my stereo or connections that are causing the problem because when i plug my ipod in via the same wire and inputs it sounds fine.
    Can anyone help please?
    Thanks

    Hmm... do you need to have both speakers in use at once?
    Normally, there's a latency only while recording (you need to set this by your self or use a feature called Direct Monitoring) but, as it's just input you have there, I can't say if this is the reason for your issue w/o knowing X-Fi functionality (these on-board systems may function a bit different from std sound cards). On older CT cards there was a setting for "Record without monitoring" but as said...
    jutapa

  • SBS580 subwoofer out of phase.

    SBS580 5.1 Surround speakers. When listening to a two channel left right stereo source I've found the subwoofer to be out of phase. The only way I can think to fix this would be to switch the connections on the bass cone, but then you probably wont be able to use them with a surround source. Great sound though!

    Yes, I agree with you, But I was wandering if there is a way in Premiere to detect it without having to monitor all the time  in a waveform way. I find it very un practical to edit this way. I always dream on the inclusion of a red light in the boometers that lights up when an out of phase audio is found. (like some professional bometers do, like Dorrough)
    If it doesn´t exist in premiere, may be some of you know about a plug in that works this way.
    Don´t you think that a function like this could be very helpfull if added directly in premiere?
    Thanks.

  • Back up error--Out of phase

    Hi,
    I used take successful backup on this tape using DB13.
    But now I am getting following error:
    BR0061I 50 files found for backup, total size 126910.432 MB
    BR0143I Backup type: offline_force
    BR0112I Files will not be compressed
    BR0130I Backup device type: tape
    BR0102I Following backup device will be used: /dev/rmt1.1
    BR0103I Following backup volume will be used: ARDB02
    BR0289I BRARCHIVE will be started at the end of processing
    BR0134I Unattended mode with 'force' active - no operator confirmation allowed
    BR0208I Volume with name ARDB02 required in device /dev/rmt1.1
    BR0280I BRBACKUP time stamp: 2008-10-02 00.39.08
    BR0226I Rewinding tape volume in device /dev/rmt1 ...
    BR0351I Restoring /oracle/ARD/sapbackup/.tape.hdr0
    BR0355I from /dev/rmt1.1 ...
    BR0278E Command output of 'LANG=C cd /oracle/ARD/sapbackup && /usr/sap/ARD/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt1.1':
    Out of phase!
    cpio attempting to continue...
    skipping 32925310 bytes to get back in phase!
    One or more files lost and the previous file is possibly corrupt
    Length of file name doesn't match expected length.
    BR0280I BRBACKUP time stamp: 2008-10-02 00.39.18
    BR0279E Return code from 'LANG=C cd /oracle/ARD/sapbackup && /usr/sap/ARD/SYS/exe/run/brtools -f detach LANG=C cpio -iuvB .tape.hdr0 < /dev/rmt1.1': 2
    BR0359E Restore of /oracle/ARD/sapbackup/.tape.hdr0 from /dev/rmt1.1 failed due to previous errors
    BR0218E Checking label on volume in device /dev/rmt1.1 failed
    BR0236I Perhaps volume initialization with option '-i force' required
    BR0056I End of database backup: bdyybedn.aft 2008-10-02 00.39.18
    BR0280I BRBACKUP time stamp: 2008-10-02 00.39.18
    BR0054I BRBACKUP terminated with errors
    OS is AIX 5.3
    DB is Oracle 10.2
    Please help me to solve this problem.
    Regards

    Hi,
    Take a look at the note 17163    BRARCHIVE/BRBACKUP messages and codes 
    the solution is indicated on the error message:
    BR0236I Perhaps volume initialization with option '-i force' required

  • Help me please someone...In the middle of auditioning loops within a project, all my loops started sounding all wobbly like they are out of phase or something. what can i do to fix this. Thanks

    Help me please someone...In the middle of auditioning loops within a project, all my loops started sounding all wobbly like they are out of phase or something. what can i do to fix this. Thanks

    raise your I/O buffer and raise your Process Buffer Range.
    Logic Pro>Preferences>Audio>Devices>Coreaudio

  • Logic Pro x out of phase

    I was recording a new song and making some piano edits by playing with an earlier piano track.  I completed one section edit fine.  When I went to record another section suddenly my keyboard was out of phase with my earlier keyboard track.  I have only recorded two tracks so I know I haven't overloaded the system with effects.  What has happened and how can I fix it?
    My Mac is running on 8GB memory.  The recording is saved on an external drive but I have never had a problem before like this so early.  I have had a vocal delay but that was after recording 14 tracks with effects.
    Thanks

    New new track.  I am trying fix some piano mistakes in my other track and when I try to play with the original track it sounds like a flanger . That's the best way to explain it.  If I play long enough the delay gets longer.  There is a delay effect that it preset for the piano in Logic Pro. I shut it off and tried to play again just in case that was the issue.  It didn't fix it.  I also noticed that some of my track have midi thru in the region in the inspector.  Thought maybe that could be the problem.  But midi thru is shut off in the preferences.  So I am kind of at a loss.

  • Hooking up the digital optical out to my stereo reciever

    I just got a new Core 2 Duo Mac Mini and I want to hook the digital optical out to my stereo. However, I noticed the connector does not seem to be a standard stereo optical cable. What do I need to do to connect this to my stereo reciever which supports digital optical in?

    Actually some toslink cables that yoiu buy, come with them. I remember buying a 6' Philips that included the adapters.
    Oddly enough, I think I found it at Wal*Mart (maybe target).

  • Rendering out of phase (pixelated). How can I fix it?

    Equipment: Canon Vixia HF20 (set to MXP) and Kodak Zi8 (set to 1080) Alienware M-18x  - i7-2860QM @250GHz – 16 GB ram – Windows 7 Professional Service pack 1 (with all recent updates installed.) NVIDIA GeForce GTX 560M (with latest drivers and updates installed.)
    Premiere Elements 12 (Expert mode)
    Canon is used for the main picture. Kodak is used for smaller “picture in picture” on top of main picture.
    Preset in Premiere Elements 12:  NTSC-AVCHD Full HD 1080i-30
    I have used this same camera/Premiere Elements setup with success in Premiere Elements 8 and 10.
    When the first video (Canon) is brought into Video 1 track it looks great and no orange render line appears. When the second video (Kodak) is placed in the Video 2 track, resized, and placed in the lower right hand corner of the monitor panel (on top of Video 1) and I click outside of the bounding box it looks fine (as does the Video 1). The orange line then appears above both videos as normal.
    The problem is when I render the videos they both become “out of phase,” pixelated, as if I had dragged their bounding boxes slightly one way or the other.
    How do I get the videos to render properly so that I can upload the project to YouTube? (This was never a problem with Premiere Elements 8 or 10)
    Many thanks,
    Randall

    The camera manual does not offer any clear information regarding interlaced or progressive.
    Here is what information I have been able to obtain from other sources on the web:
    <<As far as I can tell, I am recording in 1920 x 1080p (not interlaced). I have sent a question to Canon tech support, but they tout that the Canon Vixia HF20 records in full 1080p. I have the ability to set it to a 24p or 30p frame rate, and apparently, that records in 60i.>>
      another sources adds:
    <<My recording options are:
    - 60i
    - "PF30" which is described as "30 frames per second, progressive" but then it goes on to say "Using this frame rate, video is recorded as 60i"
    - "PF24" which is described as "24 frames per second, progressive. Using this frame rate will give your recordings a cinematic look." but then it goes on to say "Using this frame rate, video is recorded as 60i">>
    My camera is set to the default "60i"
    I installed the latest version of Quicktime
    I added the tracks to the timeline as suggested above and used your method for adding PiP 25% LR.  When I rendered a section of the video, it was pixelated as mentioned above (no change.)
    As I mentioned before, this was not a problem with either Premiere Elements 10 (Using this computer) or 8 (using another computer). The only reason I upgraded to Premiere Elements 12 was that Premiere Elements 10 would not work when I updated the video drivers and software.
    Many thanks for your help.
    Randall

  • USB audio out of phase

    I'm having a strange problem with the USB audio output of my PowerBook. The left and right channels are out of phase, both on my USB speakers and my USB headset. The analog output from the headphone jack is fine.
    The problem seems to have arisen some time around my 10.4.9 or 10.4.10 upgrade, although I can't be sure that it's related. It's still happening in 10.4.11. I suspected something strange when Skype stopped working with my headset, but it took me a lot of thinking and a tone generator to determine what the problem was. Now I'm just about positive that all USB audio output is phase reversed between left and right.
    Has anyone heard of this? I couldn't find anything in the forums. Thanks for any help you can provide.

    You may need to verify the Hd & Repair from another volume, HD, Mac, or Install CD/DVD if necessary.
    Then Repair Permissions... trouble is if you don't do this step before & after every update, you can't be assured of every file in the update/upgrade being replaced/updated, it may require reapplying a big Combo update afterwards, or even an Archive & Install after everything is fixed otherwise, personally, I use Applejack...
    http://www.versiontracker.com/dyn/moreinfo/macosx/19596
    After installing, reboot holding down CMD+s, then when the prompt shows, type in...
    applejack AUTO
    Then let it do all 5 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 5 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.

  • Jelly Bean Rolling out in Phases To the Original Razr / Razr Maxx

    I usually don't like to Start new thread's unless there is a Definite need and this one is:  As it says above Jelly Bean is Going out in Phases!  Owners Go on your Devices to About Phone and See if the Update is There if so Make sure you have a Fully Charged Battery and it's a Good thing to be Hooked  to a Wi-Fi!  If your not the closer you are to a Tower the Better to get the best Quality signal you can the reason it's a big Download ..  Good Luck!
    Written by B33
    http://www.androidcentral.com/motorola-makes-razrrazr-maxx-jelly-bean-ota-official
    http://www.droid-life.com/2013/03/07/motorola-jelly-bean-android-4-1-2-now-rolling-out-to-droid-razr-and-razr-maxx-in-stages/
    Message was edited by: B33 .

    To Go with the Roll out i Found the New User Manual Update For Jelly Bean For the Razr / Razr Maxx and i also included the New Updated Help Page from Motorola..
    https://motorola-global-portal.custhelp.com/app/product_page/faqs/p/30,6720,8417
    https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/92940/p/30,6720,8417
    https://motorola-global-portal.custhelp.com/ci/fattach/get/601071/1363036376/redirect/1/filename/DroidRAZR_RAZRMAXX_UG_JB_68017342001A.pdf
    Be Sure to look at all of Features on this Page to Get your self Adjusted to the New Change Over. b33

  • How to take a maintenance cycle out of phase 'Development without Release'?

    Gurus:
    I have a need to take a maintenance cycle out of phase 'Development without Release'.
    I have searched  OSS and SDN but failed to find any solution.
    Would you please help give some hint? 
    I appreciate your precious help.

    Hi,
    If you want to change the phase of you maintenance cycle, 2 solutions :
    Go in t-code solar_project_admin then choose you project. In the System Landscape --> Change Request Tab, then either :
    - click on the Show Tasklist button then click on the Phase button. You can change the phase from here.
    - click on the Show Service Desk transaction which is the cycle and change the phase executing an action.
    Hope it helps.
    Kind regards,
    Stéphane.
    PS : you can use tx /n/tmwflow/proj as well by choosing a project from the left pannel then clicking on the full screen button in the Scheduling tab.

  • Playback Out-Of-Phase... Help?

    Adobe Audition 3.0 & Adobe Audition CC on a NEW HP PC with Windows 8 -
    Playback is out of phase and sounds horrible on any audio recorded in real-time (eg  Mic, iTunes, YouTube, etc..)  Not sure whether it's happening during recording or only on playback.
    Playback on any Imported Audio file or CD sounds perfect.
    Adobe support installed new ASIO driver during a tech support call and then proceeded to tell me they no longer support or re-license Audition 3.0 forcing me to download CC.  Now, the same issue is happening. 
    Any suggestions?

    Yes it is correct that you can no longer activate Audition 3 either by phone or online. Follow this link to find out what to do about it.
    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
    Check your soundcard settings as in this FAQ.
    http://forums.adobe.com/thread/973133?tstart=0
    Whilst you are there go to the Enhancement tab and make sure that all enhancements are turned off.

  • How to put snaremic out of phase?

    Hi all,
    the question as mentioned above has to do with the fact that I want to record my snaredrum with top and botom mic. Therefore it is a common use to put one of the mics out of phase. I know there is a invert mode in the sample editor, but that is not what I'm looking for. When you choose that option the region is going to be analysed and then changed. But that is not a way of quickly hearing the difference. I surge a button just like in Cubase( the ø symbol) to set a track/region out of phase. Is there someone who can help me with this?
    Thanks, JH

    You can use the Gain plugin for that. Don't forget to enable Software Monitoring.
    !http://farm3.static.flickr.com/2761/4192044501d57b55153eo.png!
    regards, Erik.

  • Major Bug in Digi Core Audio Driver? Audio Out of Phase in Logic!

    In Logic 8.02 did the following;
    Using a positive only impulse (only up then decays) I did a loop back test with the both the ADAT port and the analog I/O and both are recorded out out of phase.
    Did the same tests in Logic using another Audio device with it's core drivers and all wall well - no phase issues here.
    Anyone else find this?

    This is TERRIBLE! I have spent so much time working on this project, and I really don't want to adjust the speed settings to the preset levels, BECAUSE I need to motion of the video to match certain musical points. I can't re-film my video, and I needed this project done TODAY. I made a music video with some kids at summer camp, and today is the last day- the day we were supposed to all watch it together, and now, I've got NOTHING!!!! (Because I can't export it without all those glitches!)
    I am MAJORLY DISAPPOINTED on this one. I've made movies in windows movie maker before, and purposely used imovie, because you know, everything on macs is supposed to be better. Well, I guess I was wrong.

  • The audio out (headphone jack) stereo just stopped working.

    The audio out (headphone jack) stereo just stopped working. On all my head phones (which work fine on other devices), macbbok pro sound is only coming through the left speaker. Anything I can do about this, aside just bringing it in to the shop? btw: audio output is set to middle.

    Before taking to the shop, try Reset PRAM.
    Some sound settings are stored in PRAM.
    Even though the article title says 10.7  it is applicable to 10.4.
    http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html

Maybe you are looking for