O.T. For U.S. Readers Only

Apple dumps old G4 Mac Minis at Costco
Apple is getting rid of its old G4 powered Mac Mini computers at Costco, the store where America buys its cat food and pallets of toilet paper at steep discounts.
The $699 price tag gets consumers a 512Mb Mac Mini with a 80Gb hard drive, as well as a wireless keyboard and mouse, which originally weren't included with the Mac Mini. It also comes with a three year warranty, where the Apple stores only offers 1 year (updated: initiaily said 90 days, which is Apple Care support, not warranty)

Go into the nearest Costco and look around, Tom. Mine doesn't have the mini - or if they did, it was long gone by the time I got there. They do have a bunch of 20" iMacs, though. With Costco, the stock varies from store to store. The people at the one I usually shop at are very good about checking their computer to see if something they don't have is available at another location.
Boy, that 20" iMac sure am pretty. It is the G5, though, which means Costco got those from Apple as closeout merchandise, too. Tempting. Very, very tempting, especially since my main computer is currently in intensive care. :(

Similar Messages

DBEnv initialized with DB_INIT_CDB and readers only, blocks indefinitely

I create and open an environment with DB_CREATE | DB_INIT_CDB | DB_INIT_MPOOL. After that I run a writer that creates a large number of databases in the same physical file. I terminate the process properly, by closing the Db and DbEnv instances.
Then, I create another process with readers only, after opening the environment using DB_JOINENV. If I let the readers process terminate successfully everything works fine, and I can run the process as many times as I want without any problems.
Nevertheless, if I terminate the readers process prematurely (i.e., ctrl-c) without properly destructing the DBEnv instance (since in C++ destructors are not guaranteed to be called on such an event), then I run into problems.
If I try to run the readers process again, then the process blocks waiting for a read lock. This does not happen immediately. I might have to run the readers process and terminate using ctrl-c many times (usually around 10 times), until the next execution of the readers process blocks.
It is as if there was a writer lock that was not properly disposed of, even though the process only opens databases using DB_RDONLY. Notice that only certain databases within the environment block on the Db.open call. Some of the databases can be opened without problems.

Hello,
What version are you running? One suggestion is to make use of the environment failchk method if you are not already doing so. This is documented at:
http://www.oracle.com/technology/documentation/berkeley-db/db/api_reference/C/envfailchk.html
A general discussion on handing failure is presented here:
http://www.oracle.com/technology/documentation/berkeley-db/db/programmer_reference/cam_app.html
and
http://www.oracle.com/technology/documentation/berkeley-db/db/programmer_reference/cam_fail.html
Another suggestion is to add an application handler to trap the events terminating the process, control-c, etc. and then allowing the thread to exit gracefully, performing the needed cleanup. This should release all resources.
Thanks,
Sandra

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How can I get someone to answer the phone? I'm ready to give VERIZON my business. I sat on the phone for over 20 minutes only to be transferred to "Sales." I then sat on the phone for another 15 minutes!!!! I finally hung up.

How can I get someone to answer the phone? I'm ready to give VERIZON my business. I sat on the phone for over 20 minutes only to be transferred to "Sales." I then sat on the phone for another 15 minutes!!!! I finally hung up.

It takes an enormous amount of patience and time to get through to a qualified person.
My Samsung S5 was locked out and needed a factory reset. Including attempts to achieve this locally, it took over an hour before my problem was even addressed.
You may be interested in my journey to a very good technical support person.
First I called the local sales person who had given me his personal business card with the friendly advice to call me with any questions. No answer at about 8:30 am when the business was open. His voice mailbox was full.
Then I called the local store where I had purchased the phone. The person who answered the phone had learned all the proper stock phrases, but was not familiar with the issue, stated that there were no customers in the store, and I should go there in about an hour when there would be more staff. He suggested dialing *411 from my phone (which was locked). Then he gave me a number to call Verizon, which he had to look up, and it took a minute or so. The number was (removed). That is an internal number for employees and contractors and requires a code to access, obviously not designed for customers' use. He finally cut me off by stating that there were a number of customers in line waiting for his attention!
After researching all my papers I found 800-922-0204 on my bill. The automated message suggested a hold time of 5 minutes, it took 20 minutes for a Customer Service Representative to pick up, and then I was referred to technical assistance. The hold time was announced to take 5 minutes, after 12 minutes I finally was connected.
Fortunately I had my computer set up for Skype on a loudspeaker, and was able to do some other paperwork while waiting.
Persistence was rewarded by having the good fortune to be connected to a very experienced, qualified and patient technical support staff with the name of Thomas (removed). He solved my problem, answered my questions during the process of resetting the phone, and gave an example of courteous and kind customer service that I had never experienced before when dealing with any major internet company.
>> Edited to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

Help with making JLabel visible for a few seconds only

Hello guys,
I need help with making a JLabel object visible for a few seconds only and disappear when a JButton has been clicked.
Here is piece of code where I add mouse listener to the JButton object in my case is (jrbFigure1) and
when is called sets icon and text to the JLabel jlbl object:
jrbFigure1.addMouseListener(new MouseAdapter() {
jrbFigure1.addMouseListener(new MouseAdapter() {
public void mouseClicked(MouseEvent e) {
jlbl.setIcon(cross);
jlbl.setText(wrong);
This piece of code is in a switch statement, the statement is in a method.
The JLabel jlbl object is added in a panel in the constructor of the class.
I really hope someone could help me on this issue.
I would like to thank you in advance for any help or advice given.

Bobson wrote:
Sorry for posting my issue twice, I thought, I posted it in a wrong forum:)It's OK. We'll ask the mods to delete the other thread.
I want the label to appear for X seconds when then button is pressed and disappear after that.Then a Swing Timer is what you want to use.
I need to do this in a number of cases from a switch statement because I several buttons.Better to have several ActionListeners, one for each button or each type of button, rather than one ActionListener with a large switch statement, a so-called switch-board listener. They're messy to debug and upgrade.
I tried to use Swing Timer, but I cannot set it properly.Go through the Sun Swing tutorial on Swing Timers. It's all outlined for you there: [http://java.sun.com/docs/books/tutorial/uiswing/misc/timer.html]

How to use "Mail Merge for Word" to include only Account fields?

We're attempting to use the Mail Merge for Word template to create a document containing several fields from the Account object. We do not need any fields from the Contact object, and there are many contacts linked to each account.
When choosing "Get On Demand Data > Accounts", removing all the [Contacts] fields, selecting the necessary [Accounts] fields, then clicking "OK", a "List Download in Progress" window appears, followed by one that says "Microsoft Word - Subscript out of range". None of the [Accounts] fields are available in the downloaded data.
Can anyone tell me how to include the appropriate Account fields without any Contact fields (which pulls a separate Merge record for every Contact linked with the selected Account)?
Thanks.

Thanks for trying to help with this.
So far, we've been unable to pull even a SINGLE account record. So the problem is not related to data volume limitations. The tool seems to require that Contacts are selected, but for this application we only want a single merge document per Account.
If anyone else has had success using the Mail Merge for Word tool to pull only Account data, please give us your guidance. Thanks.

My macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help.

my macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help. i've tried the command s command p command v but nothing i've tried to the safe mode then a quick restart but nothing
disk utility give me this:
Process:         Disk Utility [371]
Path:            /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
Identifier:      com.apple.DiskUtility
Version:         11.5.2 (298.4)
Build Info:      DiskUtility-2980400~60
Code Type:       X86-64 (Native)
Parent Process: launchd [86]
Date/Time:       2013-11-05 03:29:41.247 -0500
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          9522 sec
Crashes Since Last Report:           29
Per-App Interval Since Last Report: 981 sec
Per-App Crashes Since Last Report:   25
Anonymous UUID:                      F6B8E263-76C8-4C7D-AA58-48134BF4BA78
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000020
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0   libobjc.A.dylib                         0x0000000100c62fbc _read_images + 312
1   libobjc.A.dylib                         0x0000000100c79721 map_images_nolock + 1266
2   libobjc.A.dylib                         0x0000000100c62761 map_images + 115
3   dyld                                    0x00007fff5fc039c5 dyld::notifyBatchPartial(dyld_image_states, bool, char const* (*)(dyld_image_states, unsigned int, dyld_image_info const*)) + 853
4   dyld                                    0x00007fff5fc0c849 ImageLoader::link(ImageLoader::LinkContext const&, bool, bool, ImageLoader::RPathChain const&) + 201
5   dyld                                    0x00007fff5fc04d54 dyld::link(ImageLoader*, bool, ImageLoader::RPathChain const&) + 118
6   dyld                                    0x00007fff5fc08f7c dlopen + 490
7   libSystem.B.dylib                       0x0000000100a14e40 dlopen + 61
8   com.apple.CoreFoundation                0x0000000100d78ef7 _CFBundleDlfcnLoadBundle + 231
9   com.apple.CoreFoundation                0x0000000100d77e97 _CFBundleLoadExecutableAndReturnError + 1191
10 com.apple.Foundation                    0x0000000101008355 _NSBundleLoadCode + 638
11 com.apple.Foundation                    0x0000000101007c78 -[NSBundle loadAndReturnError:] + 742
12 com.apple.Foundation                    0x000000010101960c -[NSBundle principalClass] + 38
13 com.apple.framework.DUSupport           0x0000000100082080 -[DUModuleManager(_private) findDUModules:] + 405
14 com.apple.framework.DUSupport           0x0000000100081ed9 -[DUModuleManager orderedModuleListOfModules] + 40
15 com.apple.DiskUtility                   0x0000000100006082 0x100000000 + 24706
16 com.apple.DiskUtility                   0x0000000100005f59 0x100000000 + 24409
17 com.apple.AppKit                        0x0000000101444625 -[NSWindowController _windowDidLoad] + 538
18 com.apple.AppKit                        0x00000001013e1f77 -[NSWindowController window] + 112
19 com.apple.AppKit                        0x00000001015f61d9 -[NSWindowController showWindow:] + 47
20 com.apple.AppKit                        0x00000001015c7c5c -[NSDocument showWindows] + 98
21 com.apple.AppKit                        0x00000001015c64bb -[NSDocumentController openUntitledDocumentAndDisplay:error:] + 340
22 com.apple.AppKit                        0x00000001014f7b44 -[NSDocumentController(NSInternal) _openUntitled] + 111
23 com.apple.AppKit                        0x00000001014f79ab -[NSApplication _doOpenUntitled] + 257
24 com.apple.AppKit                        0x00000001014f733b -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 185
25 com.apple.AppKit                        0x00000001014f6fd9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 77
26 com.apple.Foundation                    0x0000000100ffd0d6 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 360
27 com.apple.Foundation                    0x0000000100ffcf06 _NSAppleEventManagerGenericHandler + 114
28 com.apple.AE                            0x0000000104d7332b aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 162
29 com.apple.AE                            0x0000000104d73224 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 32
30 com.apple.AE                            0x0000000104d7312b aeProcessAppleEvent + 210
31 com.apple.HIToolbox                     0x00000001028a0619 AEProcessAppleEvent + 48
32 com.apple.AppKit                        0x00000001013fc095 _DPSNextEvent + 1191
33 com.apple.AppKit                        0x00000001013fb801 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
34 com.apple.AppKit                        0x00000001013c168f -[NSApplication run] + 395
35 com.apple.AppKit                        0x00000001013ba3b0 NSApplicationMain + 364
36 com.apple.DiskUtility                   0x0000000100002009 0x100000000 + 8201
37 com.apple.DiskUtility                   0x0000000100001db8 0x100000000 + 7608
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0   libSystem.B.dylib                       0x0000000100a27c0a kevent + 10
1   libSystem.B.dylib                       0x0000000100a29add _dispatch_mgr_invoke + 154
2   libSystem.B.dylib                       0x0000000100a297b4 _dispatch_queue_invoke + 185
3   libSystem.B.dylib                       0x0000000100a292de _dispatch_worker_thread2 + 252
4   libSystem.B.dylib                       0x0000000100a28c08 _pthread_wqthread + 353
5   libSystem.B.dylib                       0x0000000100a28aa5 start_wqthread + 13
AND MORE TOO MUCH TO COPY N PASTE HELP PLEASE!!!!!

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

Looking for HP Basic Driver only for hp 2610 all-in-one printer

I have windows 7( Just recently installed) and a HP 2610 all-in-one printer.
I just wanted to download the printer driver only and not the HP Photosmart and office software Suite.
This webside say the printer driver only is availble as a separate download named "HP Deskjet Basic Driver"
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76831-1&lc=en&dlc=en&cc=us&...
But I cannot locate the webside for the Basic driver only for Windows 7 OS. Can somebody locate the web address of "HP Deskjet Basic Driver" for me please.
Regards
Tech

I just tried using Notepad as you suggested and had the same result. Paper feeds in stops at proper place and error message "out of paper"
I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem.
I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner. One for black and one for color. The ink icons would change from completly full to just an outline as the amount of ink went down. Currently the black ink icon is missing
This is a very frustrating problem because the printer works great after doing a few steps to get around the problem. The fact that the problem reoccurs any time anything is changed is the major problem
Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs. This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
I want to thank you for all of your efforts. Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer. As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

Purchased CC for business and can only assign one user. How can I assign more users to have it on all 4 computers in the office?

Purchased CC for business and can only assign one user. How can I assign more users to have it on all 4 computers in the office?

Hi there
You would need to purchase a seat for each user.
What you currently have is 1 seat = 1 user.
Kind regards
Bev

Creating Planned orders and Requisitions for a particular MRP controller and for all the others only Requisition is to be created.

Hi Experts,
Currently we run Program 'RMMRP000' as a batch job to create Planned orders and requisitions.
The client wants that Planned orders and Requisitions should be created for a particular MRP controller and for all the others only Requisition is to be created.
I implemented Exit 'EXIT_SAPMM61X_001' in the following manner by passing MRP controller to user_key.
IF mt61d-dispo <> user_key.
no_planning = 'X'.
ENDIF.
But as you can see that this will not meet my client requirement.
If any of you has worked on similar requirement / if any one knows that this is achievable or not,
please share your inputs.

Moved from SAP ERP Sales and Distribution (SAP SD) to ABAP Development
G. Lakshmipathi

I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?

I have Adobe Photoshop Elements 5.0 and am trying to upgrade to 13 - getting error message that "file archive part" of Adobe 13 is missing. When I try to download installers for older products it only goes back to v7, not v5 what to do next?

TDFields you will want to ensure the 7z and exe file are in the same folder/directory. You can find more details at Find a download link on Adobe.com.

F110 for the proposal action only,not the action to generate payment run

The user needs to be able to use tcode F110 for the proposal action only, but not the action to generate the payment run.
Please advise me specifically what action to be taken to reach that objective and whose task is this....Security people will do or FI only.

Hi,
Provide Authorization up to praposal only.
With Help of Basis Team you will restrict user authorization.
Authorization Activities:
02         Edit parameters
03         Display parameters
11         Execute proposal
12         Edit proposal
13         Display proposal
14         Delete proposal
15         Create payment medium proposal
Provide Access 02 to 15 the user can able to execute up to praposal.
21         Execute payment run
23         Display payment run
24         Delete payment run payment data
25         Create payment media of payment run
26         Delete payment orders of payment run
31         Print payment medium manually
Regards
Viswa

New Discussions: for day time use only? (-: A darker blue, please!

Thanks a lot Mods for your efforts.
I spend some time on these boards every day, so I can see things are going better and better.
I like the new Discussions better than the previous, especially everything that comes with this new ability to put much more on one page (like being able to see A LOT (not only five) of "Recent topics in this category", or that the topic's titles can be longuer than before, or being able to read the whole thread without jumping to "the next 15 posts" like before. I set "My Posts" to "50", this too was not possible before. Etc.)
Now my request:
At first I thought, like many others, that the "blue dot" and the "blue half-dot" were too small, and that we couldn't see the small grey "New!" because it was not red.
Now after all this time since Nov14, I finally understood what was wrong, because
(1) the new kind of eye fatigue I didn't experienced before, and
(2) a change in my computer's room lighting configuration.
The real problem is not the blue dot size (altough I'm sure if it was a square it would work better), it is its environment.
We have a white line after a light blue line, and this is a great feature to differenciate between topics. Works great within a thread too, to differenciate posts.
But one side effect of this is that the whole page "feels" slightly blue.
I'm not sure, but a human eye physicist could perhaps explain another kind of (more insidious?) side effect caused by the alternance of lines. Perhaps depending on which color are chosen for them?
Anyway, there is no problem with a page that "feels" blue, when the text is black.
The problem starts when the text ALSO is blue. Especially light blue...
I find the text blue color too light. Even the "visited link" purple is too light.
Given that the background is blueish, I mean. Otherwise it'd be fine.
This was not easy to understand, because the [defect/effect] is not obvious: the overall picture is nice.
But it became obvious to me when I saw that I have no problem IF I set my screen's brightess to "very bright".
New Discussions: for day time use only?
==> Please, would it be a problem (or too difficult to set perhaps?), to try a darker blue text for two or three weeks, see if we like it better? (along with a slightly darker purple for the visited links).
Thanks again for all the great work!
Axl

Hi Axl,
Some one had posted this about color,I do not remember who,sorry.
I thought it was interesting.Hopeful this color issue can be alter but deepening the colors as you & many have requested.
http://www.grc.nasa.gov/WWW/usability/colorcss.html
Good luck, Eme

I'm working in Pages 4.1. I want to add text to a header but for it to appear only on that page in stead of duplicating itself on all pages of the document. How can this be done?

I'm working in Pages 4.1. I want to add text to a header but for it to appear only on that page in stead of duplicating itself on all pages of the document. Can this be done?

See this thread: https://discussions.apple.com/thread/3728197?start=0&tstart=0

Transactional Replication - Generate a snapshot for a new art only

I will apreciate any help on this, thanks ahead!
We are running the below script that works well for us at dev and other environments but when running on prod the generated snapshot is for all articles in the publication rather than the desired results, for the new art only.
I have copied below the code being used.
SET NOCOUNT ON; SET TRANSACTION ISOLATION LEVEL READ COMMITTED;
DECLARE @rc int, @publication sysname, @article sysname, @subscriber sysname, @destination_db sysname
,@delete_article_from_replication_configuration bit ,@debug bit = 1;
SELECT @publication = N'MyPub'
,@destination_db = N'dest_database'
,@subscriber = N'MyServer'
SELECT @article = N'MyArt'
-- SET immediate_sync and allow_anonymous to false
EXEC sp_changepublication
@publication = @publication,
@property = N'immediate_sync',
@value = N'false';
EXEC sp_changepublication
@publication = @publication,
@property = N'allow_anonymous',
@value = N'false';
-- add article
DECLARE @error_message nvarchar(4000);
IF NOT EXISTS (SELECT * FROM dbo.sysarticles a INNER JOIN dbo.syspublications p ON a.pubid = p.pubid WHERE a.name = @article AND p.name = @publication)
BEGIN;
EXEC @rc = sp_addarticle
@publication = @publication
,@article = @article
,@source_owner = N'dbo'
,@source_object = @article
,@destination_table = @article
,@type = N'logbased'
,@creation_script = null
,@description = null
,@pre_creation_cmd = N'none'
,@schema_option = 0x000000000803100D /* 0x000000000803FFDF */
,@status = 16 /* 8 */
,@vertical_partition = N'false'
,@ins_cmd = N'SQL'
,@del_cmd = N'SQL'
,@upd_cmd = N'SQL'
,@filter = null
,@sync_object = null
,@auto_identity_range = N'false'
,@identityrangemanagementoption = N'manual';
IF ( (@@ERROR <> 0) OR (@rc <> 0) )
BEGIN;
SELECT @error_message = ERROR_MESSAGE(); RAISERROR(@error_message, 16, 1);
IF (@@TRANCOUNT > 0) ROLLBACK TRAN; RETURN;
END;
PRINT 'The article ''' + @article + ''' has been added to publication ''' + @publication + '''';
END;
-- add subscription
IF NOT EXISTS (SELECT * from syssubscriptions WHERE dest_db NOT LIKE 'virtual' AND srvname LIKE @subscriber AND artid IN
(SELECT artid FROM dbo.sysarticles a INNER JOIN dbo.syspublications p ON a.pubid = p.pubid WHERE a.name = @article AND p.name = @publication ))
BEGIN;
EXEC @rc = sp_addsubscription
@publication = @publication
,@subscriber = @subscriber
,@destination_db = @destination_db
,@subscription_type = N'Pull'
,@sync_type = N'automatic'
--,@sync_type = N'replication support only'
,@article = @article
,@update_mode = N'read only'
,@subscriber_type = 0
,@subscriptionstreams = 4;
IF ( (@@ERROR <> 0) OR (@rc <> 0) )
BEGIN;
SELECT @error_message = ERROR_MESSAGE(); RAISERROR(@error_message, 16, 1);
IF (@@TRANCOUNT > 0) ROLLBACK TRAN; RETURN;
END;
PRINT 'The subscription ''' + @subscriber + ''' for article ''' + @article + ''' has been created''';
END;
EXEC sp_changepublication
@publication = @publication
,@property = N'sync_method'
,@value = N'native'
,@force_invalidate_snapshot = 0
,@force_reinit_subscription = 0;
-- create snapshot
EXEC sp_addpublication_snapshot
@publication = @publication
,@frequency_type = 1
,@frequency_interval = 1
,@frequency_relative_interval = 0
,@frequency_recurrence_factor = 0
,@frequency_subday = 0
,@frequency_subday_interval = 0
,@active_start_time_of_day = 0
,@active_end_time_of_day = 235959
,@active_start_date = 0
,@active_end_date = 0;
Yaniv Etrogi
site |
blog | linked in |
mail
Please click the Mark as Answer button if a post solves your problem! or
Vote As Helpful

Hello,
1. Verify if you are using CONCURRENT or NATIVE method for synchronization by running the following command.
Use yourdb
select sync_method from syspublications
If the value is 3 or 4 then it is CONCURRENT and if it is 0 then it is NATIVE.
For more information check
http://msdn.microsoft.com/en-us/library/ms189805.aspx
2) Then add the subscription for this new article using the following command
EXEC sp_addsubscription @publication = 'yourpublication', @article = 'test',
@subscriber =‘subs_servername', @destination_db = 'subs_DBNAME',
@reserved='Internal'
If you are using the NATIVE method for synchronization then the parameter
@reserved=’Internal’ is optional but there is no harm in using it anyways. But if it is CONCURRENT then you have to use that parameter. Else the next time you run the snapshot agent it is going to generate a snapshot for all the articles.
Lastly start the SNAPSHOT AGENT job from the job activity monitor. To find
the job name follow these steps.
· select * from msdb..sysjobs where name like '%yourpublication%'
· Right click on each of those jobs and find which one contains the step
‘Snapshot Agent startup message’. This is the job that you want to
start from the first step.
3. Verify that the snapshot was generated for only one article.
Regards, Pradyothana DP. Please Mark This As Answer if it solved your issue. Please Mark This As Helpful if it helps to solve your issue. ========================================================== http://www.dbainhouse.blogspot.in/

O.T. For U.S. Readers Only

Similar Messages

Maybe you are looking for