O.T. Product Recall Notice For Parents/Grandparents
I picked this up on another site,and having used Thomas The Tank Engine in this week's challenge,I thought this warning about lead in the Thomas toys, was worth passing on :
http://www.cpsc.gov/cpscpub/prerel/prhtml07/07212.html
Ward,
The Dell recall applies to batteries shipped between April 1, 2004 and July 18, 2006. On a news broadcast today about the Apple recall batteries manufactured through this month were referenced. Unfortunately I can't remember the exact start date. I would think that if your Sony is much older than, say, February or March 2004 you should be ok.
Bob
Similar Messages
-
Dear Guru's,
we have a requirement i.e. user can convert planned orders in to production orders (CO41) based on those production orders we can get Route card( Z Smart form) presently we are using manual input for that Route card. recently we got requirement for this i.e. make to automatic generation of route card for this requirement we need to get the list of child's production orders based on parent production order
so as per my requirement i need to get all child part numbers production orders based on parent production order number and quantity i tried in MD4C and CO46 but those transactions codes are picking multiple lines also so for this requirement please give your valuable suggestions
Regards,
VenkatDear Friends,
Thanks for your reply,
My business process is MTS purely strategy 10, for route card all components with production orders we can give input as like bellow these production orders are converted from planned orders,between few components are don't have production orders those are F-30 materials,because of this reason i need link for production order to child components orders
01
IND1
IND1
A1CE2003520103-005
55685815
02
IND1
IND1
A1CE2003520103-010
55685814
03
IND1
IND1
A1CE2003520103-015
55685813
04
IND1
IND1
A1CE2003520103-020
55685812
05
IND1
IND1
A1CE2003520103-025
55685811
06
IND1
IND1
A1CE2003520103-030
07
IND1
IND1
A1CE2003520103-035
55685810 -
Hello,
Is there a comprehensive published note from Oracle describing desupport notices for Oracle databases?
Mainly - Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production, 10g r2 and 11g r1?
If so, can anyone provide the link? I do have Metalink access, so a note id would also be good.
Thanks,
RHi,
Please see these docs.
ALERT: Oracle9i Release 2 (9.2) Support Status and Alerts [ID 189908.1]
ALERT: Oracle 10g Release 1 (10.1) Support Status and Alerts [ID 263719.1]
ALERT: Oracle 10g Release 2 (10.2) Support Status and Alerts [ID 316900.1]
ALERT: Oracle 11g Release 1 (11.1) Support Status and Alerts [ID 454507.1]
Thanks,
Hussein -
IFS ALERT NOTICE FOR JDBC MEMORY LEAK FIX
IFS ALERT NOTICE FOR JDBC MEMORY LEAK FIX
Product and Version Affected:
Product: Oracle Internet File System
Product ID: 7
Version: 1.0
Description: There is a memory leak when retrieving or saving BLOBs through JDBC. IFS will appear to continue to increase in its memory consumption until the user runs out of swap space, and the machine stops functioning.
Platform Affected: Sun SPARC Solaris, Windows NT
Likelihood of Occurrence: Most iFS customers will notice this problem, since most will retrieve and store enough document content that they will notice the memory leak.
Symptoms:
- Performance becomes unacceptable on a minimally configured machine when doing significant retrievals and storage of documents.
- Significant swapping of the operating system.
- The user sees real memory and total memory continue to increase without bound when using any iFS protocols to retrieve and store document content.
- The memory usage goes back to normal when the iFS protocols are stopped.
Solution: Get the JDBC 8.1.6.0.1 patch for Solaris or NT (the OCI component, for JDK 1.1). Install it on all machines where the iFS protocols are running. The patch may be obtained on http://technet.oracle.com/software/tech/java/sqlj_jdbc/software_index.htm (you have to be logged into technet).
Be sure to get the OCI component of JDBC 8.1.6.0.1 for JDK 1.1.
nullMoving to Top
-
T510 - No label with product key numbers for Windows 7
I just noticed that my T510 does not have the Product key numbers for the installed OS (Windows 7 64-bit), which I find quite strange. My previous three T machines, both from IBM and Lenovo, all have those labels n the back.
What is going on and what are the possible implications?
Thanks for any enlightenment on this issue.
Lin Yu
Solved!
Go to Solution.Hello mate,
Remove the battery it's under it.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw -
Battery recall notice - X100e, X120e, X200, X201, X201s series models
All,
If you have a ThinkPad X100e, X120e, X200, X201 or X201s model, please review this battery recall announcement on our support site. This page contains information on affected battery models, includes an automated test that will determine if your particular battery is affected and can order the replacement for you.
http://support.lenovo.com/en_US/detail.page?DocID=HF004122
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное СообществоHi moneytoo, welcome to the forums,
the part number is used to identify the batteries which need to be and should be checked using one of the methods described in the bulletin. It does not mean that all batteries with the listed part numbers will require recalling / replacing. Please also see the following post which has some more information about the part numbers;
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Battery-recall-notice-select-T410-T510-and-...
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
How to find out the list of Production orders created for sales orders
Dear All,
Our company wants to generate a report for a List of Materials sold out in a particular Product Hierarchy. Along with that we want to know the list of Production orders created for the sales orders.
How to identify the production orders which are created based on Sales orders.
Kindly suggest.
Regards,
MullairajaCheck these threads
[Sale Order & Production Order|Sale Order & Production Order;
[Re: Linking Production Order against a Sale Order MRP run|Linking Production Order against a Sale Order MRP run;
thanks
G. Lakshmipathi -
How to maintain One product cost collector for multiple materials and configuration setting
Hi experts,
my requirement is that i want to maintain one product cost collector for multiple materials ans also i want to know the configuration setting for the same.
I have used KKF6N but it is not working in my case. I went through KKF6M also but there i found multiple cost collectors.
please guide me in the same.
Thanks in advance.Hi Shripad,
you cannot assign same Product cost collector to different material.
Because you creating cost collector for material combination of material /production version,material /Bom Routing.
so please create individual cost collector for every material.
if you have any query kindly revert back.
Please mark the answer as helpful if it is helpful to you.
Because march 5 onwards scn has stopped awarding points to liked content.
Starting now: No more points for likes on comments/replies
Thanks & Regards
Sandeep Kumar Praharaj -
How to Find Out The Production Order Number For The Sales Order Line Items
Hi All,
I want to know the number of production orders for each sales order line item. I know the sales order number .Can anyone tell me how the tables can be linked to get all the production order numbers for each sales order line item.I think it depends on your configuration. But check fields KDAUF and KDPOS in table AUFK. or in table AFPO.
Regards,
Rich HEilman -
I received a notice for software update. It froze in process. I forced quited the iPad. It will not start. I see the apple and then it goes away. Latest thing is a round iTunes with a plug symbol below it. It's plugged it and nothing.
When I do that it says it will wipe my iPad clean and start over leaving me with nothing.
-
I have this error message:
System extension cannot be used
The system extension “/System/Library/Extensions/AppleACPIPlatform.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
Please help. Is there a update or how do I reinstall?
Thanks,
JohnI submitted the above question, later finding that it has been answered by Buller already. No one need reply as Buller's answer seems to solve the problem for others, and I'll try that.
Jim -
Diferent font format for Parent/Child
Hello,With Excel Add-In, we can format the letter font differently for parent and child, using the Essbase Option (Style -> Members -> Parent -> Format).How can we do, the same thing, using Analyzer.Any help is appreciated.SL
Hi,Unfortunately there are no advanced formatting options in the current release of Analyzer (6.2.1). You can either format the data or the metadata (headers). I believe in the next release there are plans to incorporate more formatting options.Hope this helps.Paul ArmitageAnalitica Ltdwww.analitica.co.uk
-
How to assign ALV for parent node and child node that uses supply method.?
HI Dear friends,
I need to display header details ( VBAK ) and Item details ( VBAP ). I have created two node like HEADER_NODE inside this i have created ITEM_NODE for this item node i use supply function 'GET_ITEMS' any way it is working only when crete two separate table and binding but when i come to work with ALV i am totally confused .. i have created two 'View Controller UI Elements' when i try to map HEADER_NODE it mapped properly but for ITEM_NODE it shows mapping already defined. return status message as 'Action Cancelled' . In result both ViewContainer shows only HEADER_NODE data only.
How to achive ALV for Parent, child node that uses supply function ? ?
Thank youDelete Mapping is not enabled, that means there is no mapping done yet.
I just tried what you are saying and the application works and i am able to map the header table and item table and also again i could map the tables any number of times.. i didn't get any such message, sorry i couldn't recreate the scenario. might be there is something wrong in the context.
i just did it like this.
Please also move this to Web DynPro Discussion, Hope that would be helpful.
Message was edited by: Syed Ghulam Ali -
Want to add Custom text after Product Branding Image for application
Hi
Can we add any text after Product Branding Image for application
By default it will show the responsibility function name
My requirement is after company logo I want to add Text at the top of application
with center align
Need suggestions
Regards
KrishnaHi Anoop
If I done what u suggested then the function responsibilty name will also come
and the application will be disturbed
Is their a way to edit the text at the top
Regards
Krishna -
Need product key number for installed Robohelp HTML
Hello,
Can anyone tell me how to determine which product key number
for Robohelp HTML X5 is used on a particular machine?
We have two X5 licenses here, but I only want to upgrade one
license on one machine. I do not know which product key number was
used to install X5 on either machine.
I'd like to maintain older projects using X5 and upgrade one
license to develop new projects using Robohelp 8.
From what I understand--and PLEASE correct me if I am
wrong--I can run both versions on the same machine as long as I
install in different folders.
DebI don't think there is any way of telling but suggest you
phone the activation people. If anyone knows, they should.
http://www.adobe.com/activation/phonenumbers.html
You can install RH7 on a machine with X5 but you will have
issues if you need to use RoboHelp for Word in X5. Importing Word
docs and printed documentation will still be OK.
Maybe you are looking for
-
Will office web apps preview msg files in Sharepoint 2013
We are filing Outlook msg files into sharepoint and want to be able to preview the files without opening them one by one. Will office web apps do the work? Thanks
-
When connecting the iPod nano my laptop, iTunes states the nano is in need of a restore. Ok, I thought, I'll restore it then reload my music, I've succesfully did this before. I proceed with the restore but when it shows back up in iTunes listing, it
-
No profit segment - Summarization FI
Hi everybody! I'm trying to apply the "Solution (Note 36353)" to avoid the error message F5 727 (Maximum number of items in FI reached) but as the note says if I apply it I will loose some information from certain fields of the FI document, in this c
-
Logic Pro 7 : how do we coexist with PC DAW's?
I am an independent Mixing engineer using Logic Pro 7, I have just got a gig to do mixdown and mastering work for a producer. However, I use Logic and he uses sonar and samplitude. Can anyone point me in the right direction on how to convert projects
-
Photoshop Elements 10 on a Netbook
Dear Forum, I just bought an Acer netbook with no DVD drive. It is connected to a machine with a DVD drive, but when I try to install it, the program tells me there is a file missing. How can I do this?