O2 and second rate service with a rubbish phone

I went to Apple and iphone in preference to Blackberry. What a mistake.
For three months I must have spent fifty hours on the phone to O2 with a problem they cannot remedy and they say Apple cannot remedy. Are they thick. I have even given them my account settings to verify the problem and they can replicate it on their own iphones but not fix it.
What's the issue?
I have four email accounts with the same ISP - olm.net in the USA.
One account works perfectly on iphone. The other three will send and receive email from any machine anywhere in the world. Net broswer, Outlook, Kmail, Thunderbird, Mozilla et al. Work fine.
Then put the settings into Mr Jobs piece of kit. It will send and receive whilst the phone is within a wifi zone. The moment you are outside the wifi zone then it will neither send nor receive and cannot find the host. O2 even contacted OLM support who monitored the port and got nothing at all from O2's service.
Is the phone crap or is it O2 that is crap. Surely they can determine what the problem is? They set my account up at their office on one of their iphones and have precisely the same problem.
It is getting to the stage where I need to give up on the iphone. I cannot work whilst the second rate equipment or service provider is incapable of working via the O2 network.
Any ideas from anyone who may want a job with O2 what might be wrong?
Thanks.

As i said its NOT hardware and the problem is squarely in the court of O2.
You have said it yourself the three accounts with problems are not pinging your server. This has also confirmed by your Web host provider.
So you need to be looking at the DNS lookup for a start . Somethings wrong and is being blocked over the mobile network. Further if this is the case you will have the same issues with any other mobile device over the O2 network including a Blackberry.
Having said that if you are largely using the data link to receive/send mail and don't require the rich iPhone environment , apps ,photos, itunes etc.. then you might actually be better of with a Blackberry with its qwerty keyboard and NaviRoller.
Personally i think these are VERY different devices for differing roles rather than competing platforms.

Similar Messages

Windows 2012 routing and remote access service with same subnet

I have internal server IP range -192.168.1.0/24
Windows routing and remote access service with vpn client IP -192.168.11../22
client side IP subnet is -192.168.1.0/24
So we wan routing \ NATING between 192.168.1.0/24 to 192.168.11.0/22 so if vpn user try to ping 192.168.11.5 it should internally forward all request to 192.168.1.5
Don't forget to mark helpful or answer connect me :- http://in.linkedin.com/in/satya11 http://facebook.com/satya.1000

Hi,
According to your description, my understanding is that VPN client and internal network has the same IP range -192.168.1.0/24. And you want to transfer internal network from IP address 192.168.1.0/24 to 192.168.11.0/22.
Agree with Charles David’s point of view. The easiest way to fix routing confusion would be to either change the VPN subnet or the VPN client subnet.
Or, if you configure Windows Server(RRAS) as VPN server, you may enable NAT to transfer internal IP address:
1. Open RRAS, add NAT.
2. New interface to NAT and configure it as public interface.
3. Open Address Pool tab, add IP address range 192.168.11.0/22.
4. Click Reservations, add reserved IP(192.168.11.0/22) and corresponding internal IP(192.168.1.0/24) one by one.
This would be a lot of workload. Besides, you may use 3rd party devices to transfer subnet IP addresses.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I have a att iphone 4s and i have service with sprint can i use it on sprint?

I have a att iphone 4s and i have service with sprint can i use it on sprint?

Thank you guys so I figured out how to use it I have a cheap android phone on sprint I use google voice on my phone 4s and I can make calls and text messages also use FaceTime and iMessage. So I'll just trade it or sell it and buy a sprint one until then ill use google voice

Today on the way to work it was raining heavily when i got to work my coat and pocket was soaked with my i phone 5 in it i took it out and wiped the screen off when i got to work and put it in my bag the likfe was on like 50% when i go on my break like 4

today on the way to work it was raining heavily when i got to work my coat and pocket was soaked with my i phone 5 in it i took it out and wiped the screen off when i got to work and put it in my bag the likfe was on like 50% when i go on my break like 4 hours later my phone is dead and would not turn on for a while when it did it had some writting in the top left corner ive tried resseting my phone on i tunes and nothing has helped and the phone is relatively brand new so i need HELP?

Hi Tone96,
Based on your description, it sounds like you may need to have your iPhone serviced. You may find the following page helpful:
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Regards,
- Brenden

Standard Web Service and Customized Web Services with or without PI?

Hi All,
I want to know how I can use Standard Web Service available in SAP and customized Web Services
without PI Interface?
And what is the best practice to expose services ,via PI Interface or directly?
Thanks in advance!!
Pushkar

This is purely based on your requirement. If you use PI middleware to expose web services, you get standard functionalities such as certificate authentication, logging, message reprocessing for the failed messages etc. If your requirement is so simple, then you might not need PI. In this case you can develop simple webdynpro for abap program to create webservice and expose the webservice in ECC webservice runtime. You can let anyone to consume within your network. other ways like exposing BAPI/RFC as webservice. I would recommend going with PI.

Consuming and Providing Web Service with JD Edwards ERP system

Hi,
I would like to create web services with c++ or java OR any other easier way .
I need to use that web services to use in Share point to interact with JD Edwards ERP system .
Pls Note : Since not having license for JD Edwards, I need to create and call from Sharepoint Web service to JD edwards.
and not from JD edwards web service.
Could anybody guide me in this.
Thanks in advance.

I had this error again so I thought I would post my solution:
The issue is SAP needs to know the certificates being used by the web site being called. These certificates are automatically installed in your browser but need to be manually installed in SAP. This is what I did:
How to find/install new certificates
Make sure you run Internet Explorer as an Administrator so you can export the certificates
Go to the web site that SAP is trying to call in Internet Explorer
Double click on the lock in the address bar
View certificates
Find the certificates that are being used
Tools --> Internet Options --> Content --> Certificates
Click on the “Trusted Root Certification Authorities” tab
Find the certificate identified in step iii
Export as a CER certificate
Click on the “Intermediate Certification Authorities” tab
Find the certificate identified in step iii
Export as a CER certificate
Go to STRUST in SAP
Import the Certificates in the “Anonymous” or “Standard” SSL client
Save
RESTART the ICM via t-code SMICM <-- Critical!!!
Test

How to start and Stop Running services with Java Programme

I have some Service Runinig on My Windows machine like Tomcat Server,i want to update some file in Tomcat server through java program ,it works only when my tomcat stops ,I want to write peice of Code so that i can stop service with my prog and start after updating my files

heres something that may help yeah
http://wrapper.tanukisoftware.org/doc/english/introduction.html

Discover Bluetooth LE Device and its custom service with uuid and its characteristics

Hello Team,
I have a requirement for developing a library in C# which can be used in any windows app (Metro or Non Metro) apps to discover Bluetooth LE devices which are advertising a custom service with uuid and pair and find all the characteristics of the service
and send parameters and receive response.
I have tried 32feet.NET library which everyone talks about but realized it doesn't support Bluetooth LE devices. Is there any way I can do that? Or do I have write C# wrapper to use winsock2.2 library to call native code to access Bluetooth stack?
Please suggest. We have been able to achieve this requirement in Mac OSX by using their core Bluetooth framework.

Hello Priyanku,
>>Is there any way I can do that?
As far as I know, there is not such API that you can use to enumerate all services belonging to a Bluetooth LE device, nor all characteristics belonging to a service.
>>Or do I have write C# wrapper to use winsock2.2 library to call native code to access Bluetooth stack?
I suggest that you could try it.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Create a abap server proxy and consume the service with the pi WS Navigator

hi all:
i create a abap server proxy ,i use the t_code "sproxy" to generate the proxy, and then write the abap code to implemente the method; then i use the T-code (soamanager) to define the endpoint, but when i click the " Open WSDL document for selected binding" to get the WSDL file ; some error occur,the error is follow:
==========================================================================
Service cannot be reached
What has happened?
URL http://foxxi:50000/sap/bc/srt/wsdl/bndg_000C2938EF591DEE8A9A8D3DD5CCB6AD/wsdl11/allinone/ws_policy/document call was terminated because the corresponding service is not available.
Note
The termination occurred in system XIF with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If it is a valid URL, check whether service /sap/bc/srt/wsdl/bndg_000C2938EF591DEE8A9A8D3DD5CCB6AD/wsdl11/allinone/ws_policy/document is active in transaction SICF.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:FOXXI_XIF_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
==========================================================================
when i go to the ws navigator to consume the service i can not find the service which i define, but some system content display , what's the problem

had a chance to look at this?
/people/jitender.chauhan/blog/2009/04/20/service-enabling-in-abap

Can't connect to software update and other online services with airport

Hello, hopefully someone can help with this problem. When going to use software update using airport I get an error message saying there is a network problem and it can't connect. Also, when trying to use Microsoft Messenger it can't connect either way.
I can connect and use the internet using airport and apps such as iChat and Entourage work.
Can someone tell me why I can't connect to Apple's Software update service through airport?
Thanks

Is your network configuration something like the following:
DSL/Cable modem > (Ethernet cable) > [WAN] AirPort Extreme Base Station > (wireless) > MacBook?
...and, if so, you are able to get to Software Update when connecting your MB directly, using an Ethernet cable, to the LAN port of the AEBS...correct?
Since, you stated that you are using port forwarding, I assume that you have setup your MB with a static IP. Do you have any Proxies setup on either/both your Ethernet or AirPort connections on the MB?

All I wanted to do was buy a printer and I ended up with your rubbish

I went out and bought a Printer!! I'm sorry I picked your printer, but hey that's life.
I just want something that when I click the "printer" icon on IE8 or in my email it prints the document (hey this is to complicated) What it actually does is print a blank page with half the page numbers on the bottom.
I can just click print for my personal documents in my folders on my PC (that's impressive one touch printing)
But come web pages it's a big NO NO
I found out I need a printer address unknown what this is for as I have an email address in fact I have a couple which do OK thank you, I don't want a silly address so long I can't remember the **bleep** thing.
Please please tell me how to just press the print button on my web page or email and print off the document as normal as possible without coming all over the net to various HP centre based web pages for information, I have had this printer now for two weeks and I haven't printed a single thing with it apart from some document telling me my printer email address when I first pressed the APPS button (again who the hell wants APPS)
Just print .....Print .... Print
Can I sell it back to you and go and buy a printer ?
This is the crappiest thing I have ever bought EVER

Hi thanx for that I have checked and the right icon for my printer is showing, I have reset my settings in IE8 & tried 7 and all I can print is blank pages, I tried printing in Google Chrome and it worked by pressing print on my keyboard but again just blank pages in Internet explorer.
I did however go to HP help pages (get this) the answer to my problem was " Print this page" on the page "I can't print"
I couldn't make it up, well I could but the times where better then I had a canon lol
Thank you for replying I know it's hard answering peoples queries to multiple problems

Why can't I change caregivers or contacts on my GizmoPal without completely resetting the device? Accessing from an iphone 6. Have tried Verizon and LG customer service with no help or resolution.

I have an iphone 6. Recently purchased a gizmo pal for my son. Set up was easy. Works great. However, I want to be able to change caregivers when I leave him with someone so that they can call him and he can call them. The only way to do this is to reset the entire device. Shouldn't be that way ... seems that you should be able to click on the caregiver and change it. Anyone else have this problem or a resolution? Verizon and LG have both been unsuccessful in helping.

Weinmaster5,
I understand your concern and definitely want to help! Have you tried adding the additional caregiver this way http://vz.to/1zE7nMX?
JohnB_VZW
Follow us on Twitter @VZWSupport

Horrible customer service with a bad phone for the first time in years!

I would like someone - hopefully a manager to review my communication with the customer service representative last night. Apparently you only staff sales staff at night and I would not buy anything from this person. My first call rather than telling me that the support staff were not in until morning she just disconnected chat on me without saying as much as good bye. I then started a chat on the service line and got the same person. i asked her if i could speak to a manager or supervisor - she left me sitting on chat for over 20 minutes and never came back. These messages have been sent to email for your review. Aside from having purchased the most expensive phone that does not work along with an insurance plan that I was told only replaces phones with new phones vs refurbished (this is not the truth) and the policy only kicks in after the factory warrantee is over so I sit with a droad less than one year old certified refurbished that goes on and off as it pleases and randomly dials numbers. This is better than the original phone which I paid between the phone and the insurance over 300.00 for less than 1 yr ago that decided to slowly die and completely died xmas eve after I was in a car accident. Then the phone came with no sim card after I paid extra for shipping and the local store would not give me a sim card would only sell me one. This would be the retailer were I purchased the phone - a verizon retailer.
I have never in my life had an issue with anyone on the phone until last night - i was asking for one of my lines that is eligible for an upgrade next month to change it now so I can get a working phone or US Cellular has offered to buy out all four of my plans. I have always been a fan of verizon and never had issues other then never getting my rebates..........I have not received this one which still does not appear in the system and we have had 4 people submit the info now. (Because I sent the phone back I can no longer give you the numbers unless I find the paperwork copies i kept). A couple years ago I had the same thing happen when i purchased my phones from a verizon store - the rebates never came. That has really been my only complaint other than this current phone is horrible - the first one was brand new and slowly died over a couple weeks. I spend two hours troubleshooting the problems with a very nice man on the phone - he went above and beyond what he needed to do to test this phone Then the certified refurbished phone came with no sim cared - we were very specific that we thought it was a combination of a phone defect and the sim card. I paid extra for shipping so my kids could still reach me and it came with no sim card. I called and you all send me to the verizon store in Monona WI where i purchased the phone for a sim card and they would not give me one without charging me...........so I had to wait again for you to send me a sim card. Well the phone is slowly dying again this time with random on and off and random dialing while fully charged or even sitting on the charger itself. I do not think my request of the young lady was that big but point blank she did not want to talk to my if I was not buying. She should not be on the phones - you do not disconnect from people in anger and you do not answer a chat and just leave someone sitting there until they hang up out of frustration. In my office that would be grounds for immediate termination (I do not want to see anyone lose there job) but she needs serious training. She cannot handle conflict management, she cannot simply answer a question or tell you that a department is not available until morning - all understandable answers. Hanging up on someone or just leaving them sit there - not acceptable. I get paid 75.00 per hour of which she has wasted approx 5 either on the phone filing complaints or trying to get in contact with you - who is going to pay for my time because of your staff and her tempore tantrum. My 7 yr old would get in trouble for behaving that way. I expect a resolution to this issue today! I expect a phone call from a manager today! If I do not hear from someone i will file a complaint with the better business bureau - put an article in the paper in Madison Wisconsin about recent service decline in verizon and I will cancel all of my accounts with your company as well as have my husbands attorney dissolve the contract for his business and his technicians can use another service. (He is scheduled to had phones out on Monday - that will no happen if this is not resolved)
Thank you - I look forward to hearing from you today to hear how you plan to reconcile this issue.
Sincerely,
Tammy <Personal information removed for privacy.>
(The conversations were saved by email so you should have copies of both the hang up and then the call where she just left me sitting and waiting! If you do not have copies of the emails I do please feel free to ask!
Message was edited by: Verizon Moderator

I tried for 30 minutes to get to billing and all I could get was a computer that wanted money, no option for service rep. I had to change the date on one of my payments and ever since I have been getting texts saying I missed a payment and I had to call them. After I went through the aboved mentioned I finally called the new business line and was able to get transfered to billing. The lady was rude and didn't want to wait on my responses. She said I had schechuled it for the 1st and that why I was getting these texts , I was holding the paper, gave her the conformation number and told her it was for the seventh, all of a sudden the phone starting breaking up. I never had problems like this till my idenity was stolen and some guys got into my checking account, we caught it early and was able to close the account and open another. I had verizon on auto bill in the account and that was the only one I forgot put in the new info. Of course it was returned as closed. As soon as I saw this I checked the profile and changed it. They charged me the fee ( of course) and I called them to explain why this happened and apologized. Ever since then I have been treated like I'm a bum and that I don't pay my bill. I have been with them since 2000 and I'm thinking of changing it in September when the contract is up.

I lost my iphone and activated my number with an old phone. Problem is people with iphones are now sending me blank texts. How do I fix this?

I had an iPhone 4s but left it on my car and drove off. Now I have activated a temporary phone my mom had on hand (Lotus) while I save up for a new iPhone.
Is there a list out there in cyber space somewhere that lists all the iPhone numbers because now people who have iPhones send me blank text messages? I have been able to isolate this down to only happening when they send me an "iMessage" but I don`t understand why I keep getting them? Even people I had never texted with before losing my phone are sending me these blank messages. How do I fix this?

If you registered you iPhone with Apple you may want to try unregistering it by:
Go to: https://supportprofile.apple.com/MySupportProfile.do
Log in if not already logged in.
Click on ">" to the right of the phone listing
Click "unregister"
This may help unregister you iPhone with the iMessage server, allowing texts sent to you from iPhones to be sent as normal SMS/MMS rather than iMessages.

I upgraded to IOS 6.1 and My Contacts Merged with My Daughters Phone. How can she get hers back and Mine off?, I upgraded to IOS 6.1 and My Contacts Merged with My Daughters Phone. How can she get hers back and Mine off?

I upgraded to IOS 6.1 and my phone merged with both my daughters. After signinig all three phones out of my Apple ID, things went back to normal, except one of my daughters phones now has all my contacts. How do I get her just hers back?

It just does't sync. I connect it to itunes, but nothing happens. Where it says how much space I have, it's just on ebig bar that says other. I can play my music on itunes, but not when i unplug it.
All of my photos were gone, i took and saved them with my ipod.
The photo app is saying restoring.
What should i do?

O2 and second rate service with a rubbish phone

Similar Messages

Maybe you are looking for