O2 (UK) - Minutes Carry Over From Previous Month?

Hi,
If you've got an iPhone 3G in the UK, and you're on an O2 tarrif, do your remaining voice minutes and texts automatically get carried over to the next month?
I ask because a friend of mine has just completed her first month of owning an iPhone 3G. But, none of her remaining voice minutes or texts got carried over to the new month. So she's starting again with the basic 75 voice minutes, and 125 texts. Is this what should happen? Seems wrong to me.

On any o2 package the minutes and texts do not carry over. The £30 package is very poor value wise so if you are going over your minutes I would move up to the £35 package. To break what you get down to monetary values:
What the £30 package gives you.
75 mins is £15 of calls(20p per minute)
125 texts is £15 of texts(12p per text)
Unlimited wifi free(cloud and bt openzone, normally £7.50 per month)
Unlimited internet free(via network signal, normally £7.50 per month)
Total price would be £30 as well.
What the £35 package gives you.
600 mins is £120 of calls (20p per minute)
500 texts is £60 of texts (12p per text)
Unlimited Wifi is free(cloud and bt openzone, normally £7.50 per month)
Unlimited Internet is free(via network signal, normally £7.50 per month)
So £180 worth of calls for £35.
Worth it for a extra £5.

Similar Messages

Carry forward from previous month

Experts
I want to carry forward from the closing flow of last month but the system copy the value from the last month of previuos year if I use the BPC copy opening business rule.
Any way to achieve this?
I am on BPC 10.
Thanks

Hi,Johnson
In the Category dimension, there are two properties for
this.
OPENING_YEAR: blank or year from which to
read the opening balances from (absolut value like « 2006 » or relative value
like « -2 »,« +3 »). If blank, the balances are taken over from the last year
OPENING_PERIOD: blank or specific period from which to read the opening balances from
(absolute value like « MAR », or relative value like « -1 », « +4 »). If blank, the balances are taken from the last period of the year (December).
To achieve this,set OPENING_YEAR to be +0 and OPENING_PERIOD to be -1.
Have a try.

MM:Price Change did not Carry forward from previous to current period

Hi Gurus,
Client has Reported that the Weighted Average Cost (WAC) was automatically reset to Zero in a particular Period and didn’t carry over from the previous period , The initial analysis was done and it was found that there is a configuration for “Price Change in Previous Period and not in current Period” which has to be maintained for the company code
The question is whether this configuration (“Price Change in Previous Period and not in current Period”) impacts both the Standard Price and
WAC or does this impacts only Standard price
Any pointers will be helpful, Will also Award Points
Regards

Hi Gurus,
Client has Reported that the Weighted Average Cost (WAC) was automatically reset to Zero in a particular Period and didn’t carry over from the previous period , The initial analysis was done and it was found that there is a configuration for “Price Change in Previous Period and not in current Period” which has to be maintained for the company code
The question is whether this configuration (“Price Change in Previous Period and not in current Period”) impacts both the Standard Price and
WAC or does this impacts only Standard price
Any pointers will be helpful, Will also Award Points
Regards

TS4036 I added Icloud to join my calendar to another person. It erased all history date from previous months. how do I get that data back?

I added Icloud to join my calendar on my phone to another person. It erased all history date from previous months. how do I get that data back?

i found the answer to the first part: reboot and keep hold of command+r
this gave me a list of options
one of them was to reinstall lion from fresh
i went for this
dont know why... but all forum posts i read said u should delete hard disc? theres an option for this
which is the right option?
any suggesstion where i go to register new mac would be great
thanks

Values carried over from SDCR to SDMJ

Hi All,
does anyone know where we can control which values are carried over from a change request (SDCR) to a normal correction (SDMJ)? I know how where the partner functions are carried over but want to know where things like external reference number comes from. Thanks.
regards,
Jason

Dear Jason,
Ext reference no is the no which is generated whn you post service desk message from Satellite system
actually this no is normal the basis mesage no.
As we knw there are 2 part
1 CRM
2 Basis
External ref no belong to basis part
So if you can go your ticket and then use follow up button to your support desk ticket then again goto follow up preceding doc
here you can see the same no or basis part of ur message
For copying this no to subsequent doc you can goto spro .....change Transaction ->change Transaction type.->copy control for change req mgmt->define mapping rules
CHosse SDCR to SDMI ....Tick the field Ref....so it wil copied.
here you can chose the doc type and then wht you want to copy ( i mean field select it)
Hope it clarifies.
Regards
Prakhar

TAX SUMMARY REPORT: Credit from previous months

Dear experts, I have a problem in the Tax Summary Report. In this report there is a wrong value in the fiel "credit from previous months". The correct value is "0" but in the report I find another value.
I print the report of the previous months and there is the same problem (wrong value of credit from previous months)
SAP B1 A SP00 PL42.
Thanks
Paolo

Create a new user is not a solution to my problem.
There is a configuration file where SAP B1 stored the data of each user?
Thanks.
Paolo
Edited by: Paolo Orlando on Aug 25, 2009 5:06 PM

A day from previous month

Hi,
Is there any function module to get a day from previous month? I tried FM 'CCM_GO_BACK_MONTHS', but it is not working correctly.
If I give the sy-datum input as '03/30/2007', it is giving the previous month date as '02/30/2007'
Thanks,
Uma.

Try.....
report zrich_0001 .
data: day_from_previous type sy-datum.
call function 'RE_ADD_MONTH_TO_DATE'
exporting
    months        = '-1'
    olddate       = sy-datum
IMPORTING
    NEWDATE       = day_from_previous.
write:/ day_from_previous.
Please be sure to award points for helpful answers to all your threads today, and mark as solved when answered completely. Thanks.
Regards,
Rich Heilman

Wagetypes /561(Claim) and /563(Claim from Previous month

Hi,
Please explain the wagetypes /561(Claim) and /563(Claim from Previous month). and thier relevance.
I know that the difference between /561 and /563 shows the net amount that SAP has reclaimed from the overpayment in a single month.
What in case these wagetypes occur in case of a LEAVER? Then how this should be dealt with.

Hi Srijit,
Thanks for replying.
My case is of an employee who left the company in June08. His last payroll was run in June.
Now when the salary of february was processed it came to notice that Rs388/- was posted into employee suspense account. His salary statement shows Take Home pay as Zero.
The posting shows the following:
/552 ( stat net adj) ( amount)388.00 (credit)
/561 (claim) (amount)50,390.00 ( debit)
/563(claim from prev month) (amount) 50,002.00( credit)
This is the scenario.
Edited by: dips on Feb 27, 2009 7:32 AM
Edited by: dips on Feb 27, 2009 7:33 AM
Edited by: dips on Feb 27, 2009 7:36 AM

Formula to subtract current month from previous month

Hi
I would like to how to subtract current month from previous month in Crystal 10. Basically am looking at the variations that between the two month . I would also like to know the 12 m onth rolling data formula. Using the same formula, you need to get the difference between the two month.
Any help on this is very much appreciated.
Thanks
Regards
Cauvery

Hi Thanks for reponding.
Though the formula is correct, I don't think it will work out in that way because I have a 12 months rolling data formula and using this formula I have to subtract the current month from previous month.
This the formula that am currently using for 12 months rolling data
{HPD_HelpDesk.Arrival Time} >= DATEADD ("yyyy", -1, CURRENTDATE)
Please advise.
Regards
Cauvery

Data being removed from previous months calendars.

My
Data is being removed from previous months calendars

Go to settings>mail,contacts, and calendars. Make sure the settings for Sync under calendars is set to all events to sync all past events.

Can someone please help - I want to sync my icloud calendar with my iphone calendar. All of my entries from previous months are on my icloud calendar but not my iphone. How do I get them back on there?

Can someone please help - I want to sync my icloud calendar with my iphone calendar. All of my entries from previous months are on my icloud calendar but not my iphone. How do I get them back on there? I have corrected my settings for future entries (I think/hope) but want to put the old stuff back on.

Try this...
Settings > Mail, Contact, Calendars. Scroll down to Calendars and set "Sync" as desired.

Why has my calender lost past inputs from previous months?

Why has my calendar lost inputs from previous months?

Hi, Shirvinhurst
Thank you for visiting Apple Support Communities.
This sounds like the days to sync are limiting the past events. I would recommend changing the days to sync to your preference by going to Settings > Mail, Contacts, Calendars > Sync. Just in case you need to reference this information, it is located on page 61 of the user guide below.
iPad User Guide
Cheers,
Jason H.

Any way color overlay could be carried over from psd to Reflow?

Hello,
We are really excited about Edge Reflow in the office, but one pain is that layer effects in the psd don't carry over to the Reflow file. A lot of times we designers use color overlay on things like copy in various parts of the layout to see different comps and make the best design solutions. It would be great if we didn't have to change the color of the type before running the generator... Am I missing a setting? If this isn't something we can change on our end, are you guys working on it?
Thanks,
Marc

okay I see that this is getting little more complicated.
So now I see it isn't anything with windows.
I do edit the picture in raw and it looks good and save it as psd then when I open it in photoshop it looks right and if I select view-proof colors then it comes out with that crazy color as it will look after I save it.
So going from raw where i edit it looks good then after I save it even if I save it there as jpg and open on photoshop it alway changes when it is checked on proof color.
Is anyone on here that know whay this is happening? how do I make the pictures stay the same after I edit them in raw?

Delete overlapping request in PC - Request from previous month got deleted

Hi Everyone,
We are using a 'Delete overlapping request' step in a process chain. Under the Deletion Selections, we have checked the following options:
1) Only Delete Requests from Same DTP
   |_ Selections are - Overlapping
2) Request Date - Is in the Current Month
3) Exceptions:
   |_ New Request will be loaded on - 1st Day of a Month
The datasource in this case is used for a Full update into a Cube everyday. We've used the above selections so that the request loaded on the last day of a month is not deleted by the subsequent load. We need this to retain a snapshot of the data for each month.
This month, when the process chain executed on 1st Feb, the request loaded on 31st Jan was not deleted. However, on 4th Feb, the Process chain deleted the request loaded on 3rd Feb and also the one from 31st Jan. There seems to be no reason at all for the 31st Jan request to get deleted. We've made sure of that by choosing the option 'Request Date - Is in the Current Month' in the Deletion Selections.
Is there any explanation why the request was deleted?
Thanks,
Ram

Hi,
    If you dont have any selections , it will delete the previous request. Based on the selections only overlap will work. For your scenario , it wont delete previous month request after changing it to current Fiscal period. Once check the selection options , is it displaying month wise or empty selections.
Regards
Pcrao.

Calculating receipts from previous month based on the sales of current mont

Hi Gurus,
I have a requirement where i need to display sales for a quarter and need to display receipts from the previous quarter. For example consider that i am displaying sales from week1-Aug to Week4-October, I need to display receipts ( R_Net_RCPTS) from Week1-july to Week4-September. In that way If i select Wk1-Aug for sales it should display Wk1-july receipts. i need to do this in Webi by creating appropriate variables.
I have got prompts on year and Fiscal Week
I have given year as 2011 and The "08: Fiscal Week From:" as "Wk1-Aug" to "08: Fiscal Week To:" as "Wk4-Oct"
I HAVE GONE THROUGH ALMOST ALL RELATED THREADS, BUT COULDN'T FIND ANY SOLUTION. ITS REALLY URGENT. PLEASE HELP ME AND I WILL FOR SURE GIFT POINTS.

HI
Your explanation is not clear whether u want to display current quarter data or you would like to see only previous month data ?
Which dimension you are taking for week ? how data would be like ?
Edited by: K.sunil on Nov 21, 2011 9:14 AM

O2 (UK) - Minutes Carry Over From Previous Month?

Similar Messages

Maybe you are looking for