OAB Certifications Action Types

In Release 12 there are two new fields on the Action Types page (Plan Enrollment Requirements>Actions (button). On this form you select the kind of action for this plan, Dependent Requires Certification, for example, and enter the due date of the action item. There are two new fields, a required check box and a Once or Always Code field. I don't see that I am able to use either of these fields. They don't seem to allow entry and I can't find any action type or due date that "opens" them. Do you know what they are used for or how they are used?
Thanks,
Gay

Just wondering if anyone knows about this new field on Action Types "Once or Always Code?"

Similar Messages

OAB - Certifications : Action Item Due Date

Hi,
Does anyone know how to setup Due Date for the Action Type based on certain conditions?
For eg
Birth Certificate - 3 Months
Marriage Certificate - 45 days etc
Thanks in advance

Hi,
Thanks for the reply. Yes I am doing the same setup, but I would like to know is there any way to have more than one due date in the action items. This is for Dependent Certifications, currently the set-up in Program Enrollment Requirements - > Dependent Coverage - > Plan Type -> Dependent Change of Life Event -> Change of Life Event Certifications and set-up actions in the action Type window in the Program Enrollment Requirements screen
For e.g.
Dependent Certification Required - Birth Certificate - Due Date 06/30/2009
Dependent Certification Required - Marriage Certificate - Due Date 07/31/2009
etc
Likewise there are many certificates involved; Depending on Life Event, Relationship Type and other conditions it will vary. Please let me know if there are any ideas.
Thanks

Short Dump while executing New Hire (action type) in PA40

Hi All,
i am getting short dump while executing PA40 for new hire action type can anyone look into this and guide as i am new to HCM.
Category               ABAP Programming Error
Runtime Errors         SYNTAX_ERROR
ABAP Program           /1PAPAXX/HDR_21000A
Application Component Not Assigned
Date and Time          21.08.2014 14:07:03
Short text
    Syntax error in program "/1PAPAXX/HDR_21000A ".
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPFP50M" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "/1PAPAXX/HDR_21000A " in
    include "/1PAPAXX/HDR_21000AO01 " in
    line 52:
    ""LV_LENGTH" has already been declared"
    The include has been created and last changed by:
    Created by: "HCM04 "
    Last changed by: "HCM03 "
    Error in the ABAP Application Program
    The current ABAP program "SAPFP50M" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
What can you do?
    Please eliminate the error by performing a syntax check
    (or an extended program check) on the program "/1PAPAXX/HDR_21000A ".
    You can also perform the syntax check from the ABAP Editor.
    If the problem persists, proceed as follows:
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    The following syntax error was found in the program /1PAPAXX/HDR_21000A :
    ""LV_LENGTH" has already been declared"
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
System environment
    SAP Release..... 731
    SAP Basis Level. 0007
    Application server... "dc-ds-erp"
    Network address...... "172.16.23.111"
    Operating system..... "Linux"
    Release.............. "3.0.13-0.27-default"
    Hardware type........ "x86_64"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 1
    Shortdump setting.... "full"
    Database server... "dc-ds-erp"
    Database type..... "ORACLE"
    Database name..... "ECD"
    Database user ID.. "SAPSR3"
    Terminal.......... "NLC-HP"
    Char.set.... "C"
    SAP kernel....... 720
    created (date)... "Sep 14 2013 06:16:24"
    create on........ "Linux GNU SLES-11 x86_64 cc4.3.4 use-pr130820"
    Database version. "OCI_112, 11.2.0.3.0, V1, default"
    Patch level. 500
    Patch text.. " "
    Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
    SAP database version. 720
    Operating system..... "Linux 2.6, Linux 3"
    Memory consumption
    Roll.... 0
    EM...... 37708200
    Heap.... 0
    Page.... 106496
    MM Used. 4666776
    MM Free. 3709976
User and Transaction
    Client.............. 210
    User................ "HCM03"
    Language key........ "E"
    Transaction......... "PA40 "
    Transaction ID...... "53EF470299AB5D67E1000000AC10176F"
    EPP Whole Context ID.... "005056A301D11EE48A9D08B337F884E3"
    EPP Connection ID....... 00000000000000000000000000000000
    EPP Caller Counter...... 0
    Program............. "SAPFP50M"
    Screen.............. "MP000000 1000"
    Screen Line......... 3
    Debugger Active..... "none"
Information on where terminated
    Termination occurred in the ABAP program "SAPFP50M" - in
    "GET_HEADER_WITH_TCLAS".
    The main program was "MP000000 ".
    In the source code you have the termination point in line 146
    of the (Include) program "FP50MDHD".
Source Code Extract
Line
SourceCde
116
CALL FUNCTION 'HR_HEADER_GET'
117
      EXPORTING
118
           DHDID                    = FHD_HID
119
           BEGDA                    = BEGDA
120
           TCLAS                    = TCLAS
121
* Es wird nur einer der folgenden 3 Parameter benutzt.
122
* Ausgewertet wird zunaechst MOLGA, dann P0001 dann PERNR.
123
* Der erste der nicht initial ist wird ausgewertet.
124
*           MOLGA                   =
125
           P0001                    = P0001
126
           PERNR                    = PSPAR-PERNR
127
      IMPORTING
128
           PROG                     = HEADER_PROG
129
           DNUM                     = HEADER_DYNNR
130
       EXCEPTIONS
131
            HEADER_DEACTIVATED          = 1
132
            HEADER_UNKNOWN              = 2
133
            HEADER_GENERATE_DEACTIVATED = 3
134
            HEADER_GENERATE_FAILED      = 4
135
            INTERNAL_ERROR              = 5
136
            OTHERS                      = 6.
137
138
IF NOT SY-SUBRC IS INITIAL.
139
* Bei Problemen gibt's eben ein leeres Dynpro.
140
    HEADER_PROG = 'SAPMP50A'.
141
    HEADER_DYNNR = '0090'.
142
ELSE. " NOT sy-subrc IS INITIAL.                                   "
143
* Dann setzen wir jetzt auch noch das Datum fest.
144
    PERFORM HEADER_BEGDA_SET IN PROGRAM (HEADER_PROG) USING BEGDA.
145
* Und schalten auf Uebergabe der PERNR mit globalen Variablen.
>>>>>
    PERFORM HEADER_LAZY_ON IN PROGRAM (HEADER_PROG).
147
ENDIF. " (ELSE) NOT sy-subrc IS INITIAL.                           "
148
* Merken wie der Header heisst. Damit MPPERS00 sich erinnern kann.

Hi,
Error Log: Syntax error
""LV_LENGTH" has already been declared"
please check LV_LENGTH variable declaration.
It may be declared more once!

How to retrieve the action type of a PA40 action?

Hi there,
I am trying to find out the way to identify what was the action type for the personnel action that is just being executed. I will try to explain myself with a concrete example.
Let's take the hiring action.
A user goes to PA40 and initiates the action to hire a new employee. The program will then start guiding the user through the different infotypes defined within the infogroup.
Let's say that the order is IT0001, IT0002, IT0006, ...
I have setup table T779X to call a Function Module of my own after inserting IT0006. At that point in time I can know that the IT has been modified through transaction PA40 (sy-tcode) but, how can I know what action is being executed?
Thanks

Jim,
Actions can always be found afterwards in IT000 indeed
My problem is that I need to know what action type was initiated in REAL TIME. When I am debugging the batch for IT0006, after the user initiated an action through PA40
Thanks for the answer anyway

Add a new action type

hi experts,
i want to add a new reason of action type while using pa40/pa30.. can anyone help me with the steps for the same.
Regards.

Hi
u can Go through this
PM>PA>Customizing procedure>action>Define info groups>User group dependency on menus and info groups
Enter what action u want to add
Again go through this Menu path
PM>PA>Customizing procedure>action>Set up personnel action is there ,Add ur action here also
Thanks

How to set Lov item property (Action type,event,parameter etc) in PR when page load

Hi gurus
I am new to OAF, First I need to explain my scenerio.
I need to make some field mandatory or non mandatory based on one LOV item (Pick list or message choice list).
for this i extended the controler and apply the changes, but in this case what heppen, It will effect only when i open the list (pop list) and click on more (Available in poplist) and it will open a new form and i select value from that form. But when I open the poplist and select the value from the same list rather going to more option (it does not open new form), then there are no effect. I though the issue with refreshing when selecting value from the same list.
To resolving this issue what i did
1. go to page == > the same LOV
2. Change the Client Action properties (
     Action type = fireAction
     event          = xxevent
    submit = true.
After doing this when i run the page from my OAF enviroement , every thing is OK. Then I transfer the Controler to Server machine and change the controller and run the same page from the server, it has the same refreshing issue, Then I thought because I did not transfer LOV such properties so this is hepening,
Now I want to initilize such properties in Page load or what I need to do, Please advise me.
Regards,
Haq

Edward,
Thank you for the suggestion! It directly lead to my solution wherein I used CASE statements for the column in my Region SELECT such as the following:
WHEN (:P2_GRADING_METHOD = 'CR/NC' OR scs.scs_pass_audit = 'P') AND GET_GRADE_B93 (sac.stc_final_grade, sac.stc_verified_grade) IS NULL THEN htmldb_item.select_list_from_lov (5, 'Enter Grade', 'GRADE_LOV_CRNC','onBlur="return validate_grade(this,''FW_DATE_'||ROWNUM||''')"','NO',NULL,NULL,'GRADE_'||ROWNUM)
When the column is NULL, the Select List (LOV) contains the entry 'Enter Grade' and that is the value displayed on page load. I bypass the value 'Enter Grade' during Submit Processing where database updating occurs.
I did not find the need to enter values for p_null_value and p_null_text since I don't believe that it would cause the 'Enter Grade' value to display on page load for null value columns but rather would enable the user to select 'Enter Grade' from the list and have a specified return value stored in htmldb_item array.
Again, thank you for the help!

Updating action type field in infotype 0000.

Hi experts,
I have to update the action type(MASSN)field and reason for action(MASSG)field in infotype 0000 for the existing record. I am trying to use function module HR_INFOTYPE_OPERATION to update it,but i am not able to update the action type field.Below is the code.Can anybody please give me a solution for this.
DATA:ls_p0000 type p0000.
DATA : RETURN like BAPIRETURN1.
DATA : KEY like BAPIPAKEY.
DATA : RETURNE like BAPIRETURN1 .
DATA :NOCOMMIT like BAPI_STAND-NO_COMMIT.
PARAMETERS:is_pernr type pernr.
ls_P0000-SUBTY = 'IG'.
ls_P0000-PERNR = IS_pernr.
ls_P0000-BEGDA = '20100101'.
ls_P0000-ENDDA = '99991231'.
ls_P0000-MASSN = 'IG'.        "action type
ls_P0000-MASSG = '01' .      "reason for action
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
EXPORTING
NUMBER = IS_PERNR
IMPORTING
RETURN = RETURNE.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
INFTY = '0000'
NUMBER = ls_P0000-PERNR
SUBTYPE =   ls_P0000-SUBTY
OBJECTID = ls_P0000-OBJPS
LOCKINDICATOR = ls_P0000-SPRPS
VALIDITYEND = ls_P0000-ENDDA
VALIDITYBEGIN = ls_P0000-BEGDA
RECORDNUMBER = ls_P0000-SEQNR
RECORD = ls_P0000
OPERATION = 'INS'
TCLAS = 'A'
DIALOG_MODE = '0'
NOCOMMIT = NOCOMMIT
IMPORTING
RETURN = RETURN
KEY = KEY.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
EXPORTING
NUMBER = IS_PERNR
Thanks in advance.

operation "INS" is for insertion,check the FM documentation for value to be passed to operation parameter for change.
I think its "MOD"
Edited by: abapuser on Sep 15, 2010 2:02 PM

How to define action type of a personalised item

I have an existing table in a existing OAF page.it has two column one "Quantity" and one "Amount".I have to add another column"Price" in this table.My requirement is that once "Quantity" and "Price" are entered and tabbed out from the Price field the "Amount" field should get calculated(Amount=price*quantity)and displayed.
Now what I am doing is that I have created price column through personalization but there is no attribute where I can specify the action type or event type for the price column so that I can calculate the amount field by capturing that event.
I have also checked the existing Quantity column if it has such action type defined or not but there is no such action type defined.
Please tell me how it can be implemented and whether it is possible or not.
please reply if you want more clarification.

If there is no action type field for your bean, then You should try to create it dynamically through the controller code. There you will have access to all the properties of bean.
--Shiv

Action type problem

Hi All,
I Have written a program to delimit the most recent record of PA0000 and creating a new record by giving the Personnel.no , action type and date in selection screen.
It is delimiting and creating a new record in PA0000 perfectly.
But if i see in PA30 by selecting 0000 ActionsType in display mode i can able to see the newly created record,but i am not able see the new record in overview tab.
hope my question is understood, otherwise please feel free if u have any doubts about my question.
as this is urgent to me, please give me a reply .
Thanks,
JKR.

Hi,
Please activate additional actions.
GO to :IMG>Personnal Mngt>Personnel Admin>Customise procedures>Actions-->Set up Personnal actions -->Activation 'Additional Actions'
Remove Test and click on execute.
then check with the overview in pa30 for actions infotype 0000
Regards,
Pranitha

Update action type(massn) of employee in PA0000

hi abapers
i want to change action type(massn) of employee(pernr)
i have two parameter in my selection screen. one is employee number (pernr) and second is action type(massn). i want that once i enter employee number and action type. it will get updated in PA0000 infotype.
i am using FM 'HR_MAINTAIN_MASTERDATA'.
thanks
Sachin

Doing an SU53 on the screen will show you what Authorization is missing on your Profile.
However, I might add that an Action doesn't end in Infotype 0000. More often than not it is followed by changes to other infotypes via Dynamic Actions/Infogroup etc. I would rather delete the action & create a new action, instead of changing it.
~Suresh

PNPCE LDB search help shows all action types?

Hi All!
I use pnpce in my program. Want to select all vacations in 302 infotype.
By "search help" button i use "HR Master Record: Infotype 0302 (Additional Actions)" sh.
P* structures (such p0298, p0302) filles up with ALL "Action types" - not only with "V7" which i specified.
Tell me pls why?
Thanks fo ideas!!
Edited by: Julius Bussche on Dec 29, 2008 11:01 AM

Hi,
I understood from the qn that you have used PNPCE as LDB.You want to select some specific action from F4 help in input.That is not getting populated.
Sometimes, entry might be restricted for hits.After pressing F4, make the maximum no. of hits as blank.

Operation for checking action type and then reason

Dear All
I am trying to write a PCR in which first i need to check the action and then if it is a involuntry termination then i need to check the reason and say if it is dismmisal then i need to process certain logic.
Is there any operation by which i cna check action type and reason
Thanks for your supporta nd cooperation
Best Regards

Hi,
Please check MAS1N, MAS1G for OUTWP in Payroll.
Also there are some country specific operations like that, e.g. HKMAS.
You can use it as a reference for your custom operation, if standard doesn't fit your requirements.
Cheers

WebDynpro Action Types : Validating vs Non Validating Action Types

Hi
Can someone tell me the difference between Validating and Non Validating Action Types in webdynpro. I read it through, but its not very clear.
regards
Saurabh

HI Maksim,
Thanx it helped !!
I need some more help. I have a PAR file which displays an employees CV in an IView. I want to print only the content in the iView (i.e the CV) not the complete page with Roles and worksets, is there some code that can do this.
I need to place a button on the CV (in the iView) and on the click of the button the CV (iView) gets printed.
A workaround for this is that I open the CV (from the iView Personalization ) in a new window and then from the File menu of the new window fire the Print option. But I dont want to do it this way.
I want to Print the CV from the parent window only.
Plz suggest !!
Regards
Saurabh

Default Action type when hire internal employee

Dear all,
How to set Default Action type when hire internal employee?
Thanks,

Hi,
May be that. When i transfer applicant that is hired internal, the action type is default Reentry into company. So how to change this?
Edited by: Quang Le Vinh on Nov 7, 2009 2:54 AM

Hi Can you tell me any datasource whcih has both action type and wagetype.

Hi
Can you tell me any datasource or cube or multiprovider whcih has both action type and wagetype.
Edited by: manukonda anil kumar on Oct 11, 2010 1:45 PM

hi Manu,
I think this question has been answered check the below thread.
Datasource in HR which has both payroll and wagetype.
Regards
Kp

OAB Certifications Action Types

Similar Messages

Maybe you are looking for