OAD.exe error (Dr Watsons Error on NT)

I have successfully installed the Master Discoverer (3i) on an NT server. But whenever I logout from the server and log back in, I notice an "oad.exe" application error and the application doesn't work unitl I start all the services again.
This problem doesn't occur on any other servers xcpt the difference in this is that this server has got dual IP addressess.
I came across a resolution similar to this for Sun Solaris (under "Multiple NIC cards"). The recommended solution they suggested in this document doesn't seem to work for NT.
Has anybody come across this error before? Thanks in advance.
RAMA
516-428-3181 (Mobile)

Hi Lupita,
Thank you for contacting National Instruments.  It looks like you are currently running a 5.1 executable and then attempting to run a LabVIEW 6.1 executable.  Are these operations intended to be simultaneous?  Are both executables being run simultaneous when you are testing this on the XP system?  Is it possible to halt the 5.1 application and test the 6.1 executable under these circumstances?  Also, I would recommend downloading the Run-Time engine for 6.1 here, and verify that this behavior still occurs.  There may be some shared resources that cannot be accessed, but I am currently unaware of how that would initiate a Drwtsn32.exe error.
Jason W.
National Instruments
Applications Engineer

Similar Messages

  • Agntsrvc.exe error

    I installed Oracle 9i personal edition in the hard drive that runs my Windows XP home OS. After the installation, I get this error message at startup:
    Agntsrvc.exe- Application Error
    The exeception Priviledged instruction (0xc000096)
    occured in the application at location 0x0014e826.
    and it asks me to click OK to terminate the program or CANCEL to debug. How do I get rid of this message?! Thanks.

    Thank you for responding. I changed the virtual memory setting from 768 MB to 1024MB (physical memory is 512MB) and still getting the same error. Below is a transcript from the error dump. Please let me know if you have any other suggestions. I am still not sure if this error pertains to 9iDB or 9iAS (both directories have a file named agntsrvc.exe.
    Server=watson.microsoft.com
    UI LCID=1033
    Flags=99088
    Brand=WINDOWS
    TitleName=Oracle Intelligent Agent Executable
    DigPidRegPath=HKLM\Software\Microsoft\Windows NT\CurrentVersion\DigitalProductId
    RegSubPath=Microsoft\PCHealth\ErrorReporting\DW
    ErrorText=If you were in the middle of something, the information you were working on might be lost.
    Stage1URL=
    Stage1URL=/StageOne/agntsrvc_exe/0_0_0_0/unknown/0_0_0_0/00000000.htm
    Stage2URL=
    Stage2URL=/dw/stagetwo.asp?szAppName=agntsrvc.exe&szAppVer=0.0.0.0&szModName=unknown&szModVer=0.0.0.0&offset=00000000
    DataFiles=C:\DOCUME~1\Vijay\LOCALS~1\Temp\WER10.tmp.dir00\agntsrvc.exe.mdmp|C:\DOCUME~1\Vijay\LOCALS~1\Temp\WER10.tmp.dir00\appcompat.txt
    Heap=C:\DOCUME~1\Vijay\LOCALS~1\Temp\WER10.tmp.dir00\agntsrvc.exe.hdmp
    ErrorSubPath=agntsrvc.exe\0.0.0.0\unknown\0.0.0.0\00000000

  • Getting jrew.exe error while installing oracle 9i in windows vista

    Hello experts
    I'm using windows vista..I installed oracle 9i in my system..While installing third CD of oracle 9i I got error like jrew.exe error and the installation was aborted.. Is any solution to solve this issue..Pls help me

    Hi Balraj,
    Check that thread:
    oracle 9i installation on windows vista beta 2
    It is mentioned:
    Not really surprising, 9i does not run on Windows Vista.HTH,
    Thierry
    Edited by: Urgent-IT on Feb 11, 2011 9:30 AM
    You should mark the thread as answered if the responses have provided you with an appropriate response.

  • BtTray.exe error on startup in Windows 8.1

    I receive a BtTray.exe Error, BsSdk.dll missing on startup in Windows 8.0.......... PC is 2 months old and has always done this.
    Joe_Rock 

    Procedure 1:
    Step 1:
    First of all connect your PC with internet and log in your PC as administrative account.
    Step 2:
    Open Control Panel and click on Uninstall a program under Programs.
    Step 3:
    Uninstall the Bluetooth software from the list of programs.
    Step 4:
    Now from Control Panel, click on Hardware and Sound.
    Step 5:
    Then click on Device Manager under ‘Devices and Printers’.
    Step 6:
    Now open Bluetooth option and then right-click on the device and select Update Driver Software → Search automatically for updated driver software.
    Step 7:
    Now reboot and check if the problem is solved.
    if the issue persists, please try Procedure 2:
    Reinstall the bluetooth drivers using the steps mentioned in the following weblink:
    HP PCs - Using Recovery Manager to Restore Software and Drivers (Windows 8)
    Reinstall a software application or a driver without reinstalling Windows 8.
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • Windows 8.1 issue explorer.exe error on shutdown NOT resolved and painfully slow bootup

    Hi,
    I have a brand new HP Pavilion Laptop with Windows 8 64bit. I just downloaded the free update to 8.1. And then problems started. 
    First off, the boot up time has almost doubled. Just before the desktop becomes visible, there is a 10 second period where all you see is a black screen. At times this is more than 10 seconds. Then the desktop wallpaper can be seen.
    Secondly, the most annoying problem-, everytime I shutdown or restart , I get an explorer.exe error saying memory cant be read some instruction referenced memory at 0x00000000. ?! What the h-- is this ? I mean is this what we expect to see after updating to
    Windows 8.1 ? This is ridiculous. There is no offical response from the developers either. This is affecting many people all over the world and there is not even any official patch or announcement ? 
    I have read similar posts here and none of the solutions work. Someone says edit the registry, someone says remove the bluetooth service from startup ?! nothing and stopping a bluetooth service should not be considered a solution. Why should I not be able
    to use bluetooth just to resolve this Windows 8.1 error ??
    Please fix this problem urgently. And DO NOT ask us to re-install windows... I mean come on.. You think people have nothing better to do than installing/reinstalling Windows throughout the day ?? Bandwidth does not come cheap everywhere in the world either.
    Please release a patch or some guidelines on fixing this problem ASAP. 

    Hi, I have checked with that link on HP's site and for my product number it said that my laptop has been tested-Update your System from Windows 8 to Windows 8.1
    HP has tested your Windows 8 PC with Windows 8.1 and has created update instructions.
    This is what they say. And I clicked on the Windows Store Icon >> Then I clicked on the Upgrade to Windows 8.1 Tile >> Then I clicked Download Windows 8.1 Update ( over 3 GB ) waited for a couple of days >> Then clicked next a bunch of
    times >> Selected some options that it asked me >> Then waited some more >> some more waiting >> and in 2 weeks I had upgraded to Windows 8.1 >> Then the above PROBLEMS started...
    So, as a request to the tech team or dev team, pls fix this issue. 

  • I can not resolve a plugin-container.exe error while processing payroll through ADP &have been unable to find the right fix for this. I can send error report.

    I have been receiving this error now for a few weeks and have been through multiple layers of IT help trying to resolve it with ADP/Chase Payroll services. When I go to print pay vouchers I get the plugin-container.exe error and I can not print the vouchers. I can provide screen shots if this would help. Can you please advise on how to proceed to resolve this?

    This is an issue with that plugin crashing, which isn't something we can really resolve for you. Try to disable it, find a replacement, update it, or contact their support

  • AppleMoblieDeviceHelper.exe - error while setting up the environment...

    I am having problems with iTunes 8.2.1.6 on my Vista PC. I am getting the following two errors whenver I try to sync my iphone 3Gs:
    (1) 16bit MSDOS subsystem: c:\program files\common files\apple\mobile device support\bin\applemobiledevicehelper.exe - Error while setting up environment for the application. Choose 'close' to terminate the application. This error message continues to show up even when I hit 'close'.
    (2) iTunes was unable to load dataclass information from Sync Services. Reconnect or try later.
    I have tried running both iTunes and applemobiledevicehelper.exe in administrator mode and that does not help. I have also tried reinstalling iTunes.
    Any ideas?

    Hi Sahil,
    To address your scenario, while creating the configuration, select all the required agreements to create one configuration and then deploy.
    Alternatively, you can also apply the latest patch MLR (10.1.2.3)
    Regards,
    Dheeraj

  • Getting NTVDM.EXE errors in itunes - keeps crashing

    Every time I start itunes I get a "16 bit MS-DOS Subsystem" error. Message reads...
    C:\WINDOWS\system32\ntvdm.exe
    Error while setting up environment for the application. Choose 'close' to terminate the application
    I then have the option to close or ignore it. If I ignore it I can still access the app store and stuff but when I go to sync my iphone itunes locks up and I have to go to task manager to end the program. What do I do? (this started with the latest itunes update... now I can't even update my iphone because it goes into a permanent backup loop (I have had to kill it after 12 hours a few times!)HELP!!!

    I don't have an answer for this, but from first principles here are some things to try.
    Since the problem occurs when you plug in your iPad there may be a problem with Apple mobile device support.
    Try removing iTunes and related programs using this method:
    http://support.apple.com/kb/HT1923
    Then reinstall.
    In case there really is a problem with ntvdm.exe, try running the system file checker:
    http://support.microsoft.com/kb/929833
    And finally, in case other software is interfering with it try using MSConfig to check for conflicts.:
    http://support.apple.com/kb/HT2292?viewlocale=en_US

  • Javaws.exe error in xi3.0 urgent

    Hi masters,
    Iam trying to open sxmb_ifr from abap stack the IR /ID and SLD /RWB screen opens.when i select IR/IR iam getting javaws.exe error.Pls suggest me .Iam facing this problem since one and half year.But cant able to troubleshoot.
    Regards,
    Winston.

    Hi Pinkle,
    I tried with j2sdk1.4.2_12 and 1.4.2_16 and reinstalled manytimes but the error is not rectified in XI 3.0 and PI 7.0.
    Regards,
    Winston.

  • Java.exe Error while running Tomcat

    Hello,
    I encountered a very strange Java.exe error while testing my servlet.
    Here is the screen dump of the aforementioned error:
    http://www.shelleysauction.com/db07-22-02.jpg . The error's message is
    as follows: "There is no disk in the drive. Please insert a disk into
    drive \Device\Harddisk1\DR1."
    Would appreciate any help; I don't claim to be any good at this stuff.
    All of the information on that page is derived from a database on a
    remote intranet machine (including input type, title, descriptions,
    etc.). I am not sure if it is a server-side error or a client-side
    error as my computer is running the server; another computer is not
    possible--I'm a lowly summer intern hired to build a servlet that
    interfaces with a database, and I'm not a good programmer.
    The only thing I can think of is that I recently began using the
    com.oreilly.servlet.* package for its Base64Encoder, Base64Decoder, and
    MultiPartRequest methods. That form was working fine for weeks before
    then.
    Jennica Humphrey

    Hello all,
    Thank you for your help. I was using the MultiPartRequest class in the com.oreilly.servlet.* package so I could add a "section" that allowed users to upload CSV files to the database. It required, I think, that an opening FORM tag would have the following attribute: enctype="multipart/form-data"
    Now, I made a HtmlGenerator class that writes the HTML for me, with all sorts of methods like html.startTableCell( String stylesheet, String align, String valign, String width ) so I could just type html.startTableCell( "palepurple", "left", "top", "50%" ); ... made reading my own crap a lot easier.
    Anyway, I had html.startForm( ) and html.startUploadForm( )... the only difference was that the upload one had the enctype="multipart/form-data" attribute and the first one didn't. Now, my DoPost() method was supposed to determine if there were "regular" parameters passed on by the form and if there were "MultiPart" parameters... with code like this:
    // Initialize MultipartRequest.  This is required for file uploading.
    boolean isMulti = true;
    MultipartRequest multi = null;
    try {
         multi = new MultipartRequest( request, "..\\..\\Files", 10 * 1024 * 1024 );
    } catch( Exception e ) { isMulti = false; }
    Enumeration paramNames = request.getParameterNames();
    // Attempt to initialize parameter names.
    try {
         if ( !paramNames.hasMoreElements( ) ) paramNames = multi.getParameterNames();
    } catch ( Exception e ) {
         /* Ignore */
    ***code snipped out***
    if ( isMulti )
          paramValues = multi.getParameterValues( paramName );
    else
         paramValues = request.getParameterValues( paramName );This was working fine, but after submitting "regular" (not uploaded) forms 3 or 4 times, it'd give me that error. Then I decided to change html.startForm() to work exactly like html.startUploadForm()--in effect making every form a MultiPartRequest. It works fine, without any errors. Do you know what was going on?

  • Wlserver.exe error occur while start the web logic server-please help

    hi
    Iam getting wlserver.exe error when I start the web logic server-please help. and I cant able to start the web logic server.
    Thannks in Advance,
    Cheers,
    bala...

    Could you please mail the errors and the WLS Version and service pack as well.
    - Ramkumar

  • Svchost.exe errors after installing iTunes 7.0.1.8

    I have two computers that starting throwing svchost.exe errors immediately after installing iTunes 7. First it happened on my desktop. In preparation to reinstall Windows XP on my desktop, I prepared my laptop to use while my desktop was out of commision. I installed iTunes 7 and immediately I started getting svchost.exe errors. I don't have the blaster worm on either machine (already checked). My desktop is behind three firewals, runs Norton, and I already did a full virus scan on both.
    This is causing significant problems as my computer can't see the network, outlook can wig out, and in general my machine is unpredicatable. I hate to think that installing iTunes 7.0 leads to the need to reinstall Windows. If anyone has any ideas I would appreciate any help.

    I changed my "Startup Type" for "Terminal Services" from "Disabled" to "Manual". Resolved issue.
    http://docs.info.apple.com/article.html?artnum=304434
      Windows XP Pro  

  • Problems since 2.2.1  (applemobilebackup.exe error, long sync time)

    After installing 2.2.1, I am experiencing the following and wondering if anyone on this forum has a solution to the following two issues. Thanks in advance.
    While syncing to my pc (it's a toshiba laptop running xp sp3), right before completing, there has been an applemobilebackup.exe error appearing that I click ok to and then it finishes sync'ing. I'v searched the net and it seems like I'm the only one experiencing this??
    It seems to keep taking longer and longer to sync. I remember the status bar running faster than I can keep an eye on it. After installing a few games, it's at a crawl these days. I uninstalled the Facebook app and still runs at a crawl. Anybody have any ideas how to enable faster sync times?

    Here is an article from the apple support website that might help out.
    http://support.apple.com/kb/TS1401
    http://support.apple.com/kb/TS1878

  • Gwes.exe error on Windows Mobile 5.0

    I keep getting a gwes.exe error while running my app built using LabVIEW for PocketPC 8.0.1.  What is it?  How can I debug this?
    Robert

    Hi Robert,
    This seems like a windows issue.  After a quick Google search I found many links which explain what GWES is (http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wceshellui5/html/wce50conShellandUs...), and many people who encountered similar errors with different applications.   Since the GWES stands for Graphics, Windowing, and Events Subsystem, I was wondering if you can correlate the crashes with anything in you program that has to do with using a graph, or event structure, etc.
    You may want to read some of the posts online in case one of them is similar to your issue.  
    Regards,
    AG

  • Java.exe error message

    I am getting a java.exe error message after installing Oracle 8i Enterprise Edition on a Windows XP home edition. Can anyone help?

    Hi,
    Oracle usually installs it's own JDK for it's usage. Probably the paths are updated so that iAS is not able to use java that is bundled along with it. Please check the version of java at the command prompt by issuing..."java -fullversion". Please let me know the outcome for me to help you further on this.
    Regards
    Ganesh .R
    Developer Technical Support
    Sun Microsystems
    http://www.sun.com/devlopers/support

Maybe you are looking for