OADP settings for MSS Services - Define Rules for Object Selection

Hi
Our client wants to extend MSS to all managers, and to begin with want option of "Only B002 Relationship" in drop down of Team Calendar.
I have tried all standard options but unable to find a suitable rule(Define Rules for Object Selection) which would restrict the list of employee to only B002 Relationship of Manager.
Any ideas on how to achieve it?
Regards
Yash

Hello Yash,
I think first concern here should be to make things work at your end...thus I am not focusing on your evaluation path...that you have set....
Just to kick off things so that they start work for you.....
you need to set the evaluation path as I have mentioned in my earlier reply....
These evaluation paths have been working for me...
To correct yours as per mine you need to set
ZB2 as
10 S B 002 Is Line superior of * S
and set
ZB3 as
20 S A 008 Holder * *
Now if still things does not work then...you need to check the Tcode PPOM_OLD and see if the correct reporting relationship (B002) exists for the logged in user.....
These evaluation paths are very confusing for me.....and so I am not trying to correct what you have set in ZB2 and ZB3....
And also note that there can be more then 1 way to achieve your goal with evaluation paths.....
Yash here on we will focus on this thread only.......Let Upendra clear his doubts with that thread.....right..?
Object and Data Provider evaluation path to get subordinates.
Edited by: Saurabh Agarwal on Jul 24, 2011 7:44 AM

Similar Messages

  • Data not coming from DOE to Mobile After defining Rule for device attribute

    Hi All,
    I have created a DO and rule for it.In case of Bulk Rule for all definition when i triggere extract from Portal then all the data comes to outbound queue but when i define rule for Device attribute then no data comes to my Outboun queue.Here is the scenario what i am doing :
    1. I have order header in my backend which has a field named "Work_Center" and this will be criteria field.
    2. In CDS table i have all the records for all the work center.
    3. Now in RMM under customized , i have added an attribute named "Work_center".
    4. Now i defined a rule with Device attribute mapping and activated the rule.
    5. Now on Portal i assigned this data object and in the device attribute tab i assigned the value(this value exist in CDS table for few orders) of a   Work center to the attribute "Work_Center" .
    6. Then i triggrere extract but its Outbound queue is empty, what could be the reason.
    Is my approach is correct
    Regards,
    Abhishek

    Hi Abhishek,
    You can check one ore thing, after you have performed all the steps till step 5, i.e. just before triggering
    extract. Check if the AT table for ur DO has entries based on the criteria specified by you...
    1. In the workbench click on the Data Object, and then right click and select "View Metadata".
    2. Select Distribution Model tab.
    3. Now select your DO's Association table.
    4. For the input field DEVICE ID specify your corresponing device id,and also for status field specify it 
        as "I"  and execute
    If there are any entries now in the AT table, and on triggering extract if they are not coming to the
    outbound Q there is some EXTRACT Q blocked. And is there were no entries in the AT then the rule
    specified is not  the satifying.
    Thanks,
    Swarna
    Now if you have entries w

  • User defined rule for missing triples

    Hi,
    i would like to know if there is a way to define a user defined rule for triples that are not contained in a model. With curly brace syntax it could be something like this:
    INSERT INTO mdsys.semr_validation_rb VALUES(
    'test_rule',
    '{?s ?p ?o. OPTIONAL{?s rdf:type ?t}}',
    't is null',
    '(?s <hasType> "false")',
    null);
    Unfortunately this is not working. Has anybody a suggestion to solve this problem with user defined rules?

    Hi,
    This is related to the following post.
    built-in primitives(noValue,remove) for user defined rules
    Note that there is something you need to pay a bit attention to.
    Say your original graph contains
    :John :fatherOf :Mary
    but not any type classification for :John (i.e. no match for {:John rdf:type ?t})
    Assume you add the following triple according to the rule you described
    (:John <hasType> "false")
    Now, what happens if :John is classified as a :Person (or :Parent, :Father),
    do you want to withdraw* :John <hasType> "false"?
    Thanks,
    Zhe

  • Question for customs "Define rules for default document data"

    Hello all,
    we would like to set up the data for AES. We set the country of origin, as you can see on the below screenshot.
    The problem is that the country of origin is not forwarded to AES. In the export declaration under the item detail there is an empty field at the country of origin.
    What do we have to change in the set up "Define rules for default document data"?
    Thanks in advance.
    Sven Sklarek

    Hi Sven,
    Sorry to take the conversation in a different direction, but it's very unusual to propose the Country of Origin (CofO) by default, and not usually accepted by the Customs authority.  Generally the CofO depends on where you obtain the goods.  If that doesn't change much, it's usual to set the CofO on the Material Master record in the ERP system - in that case the value copies automatically into the GTS Export Declaration item.  That is why there is no standard configuration having IT_CUCOO as a Target Field.
    Also, in many countries, CofO is not mandatory in the Export Declaration (although always mandatory in the Import Declaration).  You might want to check the situation in your area.
    Regards,
    Dave

  • Define Rules for Variants under Daily Work Schedules.

    Hi All,
    Can anyone explain me what is the use of Define Rules for Variants under Daily Work Schedules.
    Also can some one explain what is the meaning of below representation
    Rule   No      Holiday Class     HolClNextDay          Day     Varaint
    01     03         X.........              XXXXXXXXXX      .....X.     A
    Thanks in Advance
    David

    Hi David,
    Thanks for putting this question .  I was also searching for its answer because when variant is applied on Friday and if any full day public holiday falls on Friday then variant would be null and void.
    I got confused with the holiday class 2 which is half day public holiday, what if it falls on Friday?
    Variant in itself is reduced working hours and half day is one and the same thing.
    I have tried rules in many ways to trigger variant on Friday:
    Rule          HC current.                    HC next day.                   Days.                      Variant
    XX.     01   XX.XXXXXXX                XXXXXXXXX                   ....X..                      B
    XX.     02      ..X...........                       XXXXXXXXX              XXXX.XX            
    Or
    Rule          HC current.                    HC next day.                   Days.                      Variant
    XX.     01   XX.XXXXXXX                XXXXXXXXX                 ....X..                        B
    In the 1st case the 2nd condition is unnecessary confusing, however things are working fine with only 1st condition.
    Please clarify what is the difference in 1st and 2nd case?

  • Define Rules for Variants (Daily Work Schedules)

    Hi All,
    I wanted to set up the following rule for varients :
    If Holiday Falls on SUnday then Monday should be change Off.
    I have created Varient for DWS.  as NORM , NORM - "C".
    01     03     .X........     X.........                          ......X     C
    01     04     X.........     XXXXXXXXXX     X......     C
    But above setting turing all Mondays to Varient C.
    How can I make only Monday  as Varient as C when its previous day is SUnday and Holiday Class 1.
    Regards,
    Kamal Rawal

    Hi Kamal,
    In SCAL- At the time of creating public holiday you can define in Guaranteed section as Public Holiday on Sundy (Select Sunday) , then move to next day  or move to previous day
    Pls check & revert..
    Regards,
    Mahesh

  • Defining rule for varients in DWS

    Hi gurus
    I am on the way of learning HR Time management . I came across a configuration of definind rule for varients in DWS .
    I could find some standard entries there .and check for F1 help , but not under standing it clearly .
    check in help.com in the link
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/8a/9868bc46c411d189470000e829fbbd/frameset.htm
    but cant able to find that topic . can any one explain how to how to define a rule in that table .with documentation link .
    Regards
    Arumugam.

    Hi,
    The rules allow you to stipulate that a variant of the daily work schedule should apply on certain days. Taking the following parameters into account, you can set up rules for daily work schedule variants:
    The public holiday class
    The public holiday class of the current day
    weekday
    Eg: If we want half day holiday before public holiday, without going to rule we can do through daily workschedule vairant. However,
    Rule  B1234546789  B123456789  1234567  variant
    01     x                       x                xxxxxx   A
    Second column representing the before public holiday, 3rd column representing the current public holiday, 4th column representing the weekday, 5th is variant.
    Here, how i selected, i required half day holiday before pulic holiday class(1), for that i have given X in first column under B, any working days.
    Good Luck
    Devi

  • Why is CSS rule for NavDiv controling CSS rule for ContentDiv?

    Help Please.  CSS rules are controling my layout and I cannot add a list into my content.
    The CSS rule for my NavigateDiv appears to control the List in my ContentDiv and I cannot get the ContentDiv list to format.
    css file: http://swilkins.free0host.com/roswell/roswell.css
    html file:http://swilkins.free0host.com/roswell/attractions2.html
    I want to put a list under State Parks in the ContentDiv
    What is required to have the contents CSS not controlled by the navigate ul, li CSS?
    Using Dreamweaver CS4, Windows Vista
    I posted this yesterday and was requested to post my files.  I did so, however didn't receive a response.
    Thanks in Advance

    Change this:
    #navigate ul, li {
         float: left;
         list-style: none;
         margin: 0px;
         padding: 0px;
         display: block;
    To this:
    #navigate ul, #navigate li {
         float: left;
         list-style: none;
         margin: 0px;
         padding: 0px;
         display: block;
    And you have a few validation errors in your code. Use these on-line code validation tools.
    HTML Validator - http://validator.w3.org
    CSS Validator - http://jigsaw.w3.org/css-validator/
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics |  Print | Media Specialists
    www.alt-web.com/
    www.twitter.com/altweb

  • Define rules for tables in personas

    Hello,
    I'm having this strange issue in personas right now that is leaving curious for what is actually going wrong.
    So I want to hide every row that is not having the "tick mark" in the box. See picture for personas rule that I have defined. A is the column with the tickable box.
    Before i save the flavor it looks like personas is actually trying to do the rule that I have defined. The rows that don't have the tick mark is now grey.
    But when I later save the flavor and opens up the table this happens. All the rows are now grey no matter what.
    So the result is not very satisfying. And to top it off it looks like its working befor you save the flavor.
    Anyone got any ideas on this one?
    Best Regars,
    Oskar Söderlund

    Oskar,
    I would first isolate this into two things to study:
    1. Does the "Hide row" rule work correctly without check box? - Find another table which does not contain the check box, but some elements. Then set a rule, eg, if value equals to xx, then "Hide rows".  Now check if the grey background works as it is supposed to be.
    2. For the use of the ckeck box in table, is "is empty" the right condition that should be used? For a normal check box on UI, it would be "check" method which will sets the tick.
    Would this help? Good luck,
    Dong Zhu

  • Modifying properties with a file for Web Service Stub used for Oracle Forms

    I have created a stubbed-out web service in JDeveloper (10.1.3.4) and imported into Oracle Forms.
    However, I would like to use a properties file to call the appropriate endpoint based on if the environment is dev, test, UAT or prod. I see that a properties file is referenced in the _Stub class. Here is a snippet of code from that class file:
    public CriticalChangeWS_Soap11_Stub(HandlerChain handlerChain) {
    super(handlerChain);
    setProperty(ENDPOINTADDRESS_PROPERTY, "http://epw-01.gds.graebel.com:8087/CriticalChange.svc/Soap11");
    setSoapVersion(SOAPVersion.SOAP_11);
    setServiceName( new QName("http://tempuri.org/","CriticalChangeService"));
    setPortName( new QName("http://tempuri.org/","CriticalChangeWS_Soap11"));
    setupConfig("wsquery/proxy/runtime/CriticalChangeWS_Soap11_Stub.xml");
    How can I use the XML file to set the ENDPOINT_ADDRESS_PROPERTY?
    Thanks.
    Jim O

    Hi Frank,
    I got the following two lines of code just to check if WebServiceConnection was able to read the connections file alright.
                String urlString = wsc.getWsdlUrlStr();
                System.out.println("WSDL URL: "+urlString);
    I am not using urlString for further processing.
    The output is
    WSDL URL: http://<host>/PSIGW/PeopleSoftServiceListeningConnector/MyService.1.wsdl
    java.lang.NullPointerException
            at java.lang.Class.isAssignableFrom(Native Method)
            at oracle.j2ee.ws.common.jaxws.runtime.GenericJavaType.create(GenericJavaType.java:97)
            at oracle.j2ee.ws.common.jaxws.runtime.GenericJavaType.create(GenericJavaType.java:118)
    The WSDL Url pointed to is the one that I configure in the connection while deploying the App.
    Ran a test and WSDL Url is accessible by the app.

  • Novice for web services any link for powerpoint lectures slide for webse

    i want to start with web services using my knowledge of java
    can any one send me a link for the powerpoint slide show to learn webservices i visited deitel but slides are not available
    appricate our concerns
    thanks

    Hm..I actually don't know what exactly you are looking for, but if you want to learn this web-related stuff, it wouldn't hurt if you check the tutorial first:
    http://java.sun.com/docs/books/tutorial/

  • I have paid for my service and waited for 15 days,...

    Hi there
    I bought and paid for a skype service 20 days ago, but until now, I have not found the service available under my account. 
    I have bought skype service many times, so I do not think I made any mistakes. I reported this issue 5 days ago, but looks like no one cares me .
    Please contact me and check what happened. 
    Regards,
    David

    Finally, I find a way to contact thier customer service (after many miniutes researching) . You need to find a text chat option on thier help web page. I am sure it is quite diffuicult to find this, so leave this chanllenge to you. And then, Skype solved my issue and explained that was caused by a bug. Their service is OK, as long as you can find. Good luck!

  • Direct reportees for MSS

    hello gurus,
    My requirement is when a Manager logs in thru MSS he can only view the direct reportess & their details. Say a Department may have 1 head & 2 Managers. So each manager can view only the direct reportees when he logs in the MSS.
    Currently the reporting display is possible only if i assign A/012 relationship & this wud display all reportees under this dept.
    Reading the threads i assumed changing the evaluation path will help but am confused as how to do it. In SPRO under OADP there are steps to be maintained Eg - Define Rules for Object Selection. When i go to this step which std entry do i copy & wht evaluation path can i use to get the desired result.
    Pls help me.
    rgds,

    Hi siddharth,
    thnk u so much for the reply
    i have already gone thru this link & with its help made the changes.
    My requirement is when a Manager logs in MSS he can only view the direct reportees under him
    currently my observation is that the reporting structure is visible only if the Manager is assigned A/012 relationship. If i remove this relationship then there is no display of reporting structure.
    i copied the standard entries & modified acc to my requirements.
    (A) Object Selection Rule : - Z_MSS_TMV_RULE1 (Evaluation Path - SAP_MANG)
                                                 Z_MSS_TMV_RULE5 (Evaluation Path - MSSDIREC)
    (B) Selection Rule :- ZMSS_TMV_EE_DIR
                   Rule for Root Object = Z_MSS_TMV_RULE1
                   Rule for Target Object = Z_MSS_TMV_RULE5
    (C) Organizational Structure Views :- ZMSS_TMV_EE_DIR
                  Obj Sel = ZMSS_TMV_EE_DIR
                  Grp of Data Views = MSS_TMV_EE
    (D) Group Organisational Structure Views :- Z_MSS_TMV_EE
                  Org Struct View = ZMSS_TMV_EE_DIR
    I have copied the Std entry MSS_TMV_EE for the above config
    1) Can u suggest what more i need to add to the config to get the desired result
    2) Where & which FUNTION MODULE to use
    3) Which other evaluation path can i use to get the desired output?? (i tried changing the evalution path for Target Object & no data was displayed)
    3) Is is mandatory to assign A 012 relationship to the Manager?? Because i only want direct reportees & if i assign A012 then all the subordinates in the Org Unit will be dispalyed where as i only want direct reportees tobe displayed.
    all help is highly appreciated. Pls help me resolve this
    rgds,

  • Create rules for selection of Reconciliation posting (TCODE: KALK)

    Hello SAP Experts,
    I haven't worked on New GL concept but I am trying to learn it myself. Till now I have linked the Controlling area with New GL. But I don't know how to "define rules for selection of reconciliation posting"
    SPRO--->. FInancial Accounting (NEW) --->Financial Accounting Global Settings (NEW) ->Ledgers-> Real time integration of controlling and FA--->Define rules for selecting CO line items
    If any of you who have worked on it can explain me about it then it would be great.
    Thanks in advance.
    Mohit
    Edited by: mohitg7 on May 2, 2010 3:44 AM

    Do as below my dear
    Go to FS00 and input the GL 400019. Check the Tab "Create/bank/interest.
    Take the Field Status group and go to OBC4. Examle- G052
    Click on the same Field Status group and double click on Asset accounting.
    Asset retirement ...........................Required
    Asset number / subnumber...........Optional
    Now go to T Code OB41
    Double click on Posting key 15
    Click on "Maintain field status" from application tol bar. Double click on Asset accounting.
    Asset retirement ...........................Optional
    Asset number / subnumber...........Optional
    Now post the transaction and see
    Thanks

  • Re: Why doesn't WL7.0 support get/post bindings for web services ...

    hi!!!
    Could you pls point to any code example.
    thanks
    Pushpa
    "Richard Berger" <[email protected]> wrote:
    >
    Manoj: Thanks for the answer - do you have or can you point me at any
    code samples
    that accomplish this? (Yes, .NET is limited to strings/ints in their
    get/post
    bindings).
    Thanks so much!
    RB
    PS - Also, can you explain any apparent discrepancy between your answer
    and what
    the WL documentation stated (again, it may be my misunderstanding).
    "manoj cheenath" <[email protected]> wrote:
    WL 7.0 does allow you to access the web service through
    the browser. It even allows you to invoke service methods
    with complex type arguments (.Net only supports primitive
    types) and also to view the request and response soap
    message for the invocation.
    regards,
    -manoj
    "Richard Berger" <[email protected]> wrote in message
    news:[email protected]...
    This might be a naive question, but according to the documentation,WL 7.0
    does
    not support http post/get bindings for web services. Thus, for meto
    access a
    web service, I need to write a "middle tier" of some sort (I used
    the
    automatically
    generated Java proxy code and JSP). All works fine, but it seems
    like
    it
    would
    sure be nice to have HTML forms access web services without havingto
    write a
    middle tier.
    NET does this and it is extremely useful - is there a reason that
    BEA
    chose not
    to provide this feature? (e.g. is it architecturally unsound in anyway?
    or is
    there an easy way to simulate it?). Given some of the Web Workshoppositioning
    re: ease of use and .NET comparison, this seems like an omission.
    Any insights are greatly appreciated.
    Enjoy,
    RB
    PS - Here's the info from the documentation
    Web Services Description Language (WSDL) 1.1 Specification
    WSDL is an XML-based language that describes Web services. WSDL definesWeb services
    as a set of endpoints operating on messages; these message containeither
    message-style
    or RPC-style information. The operations and messages are describedabstractly
    in WSDL, and then bound to a concrete network protocol and messageformat
    to define
    an endpoint. Related concrete endpoints are combined into abstractendpoints (services).
    WSDL is extensible to allow the description of endpoints and theirassociated
    messages regardless of what message formats or network protocols areused
    to communicate,
    however, the only bindings described in the specification describehow to
    use
    WSDL in conjunction with SOAP 1.1, HTTP GET/POST, and MIME.
    Note: WebLogic Server supports only SOAP 1.1 bindings.
    The WSDL 1.1 Specification is available at http://www.w3.org/TR/wsdl.

    This isn't a straight FORM Post as in the http binding support in WSDL. It posts
    a soap message.
    It's apparent that Workshop supports form-post and form-get.
    But I dont see how it is done with straight WebLogic webservices. Does WebLogic
    server read the web-services.xml or the WSDL file? I dont see a way to put in
    http-post binding in the former and in the latter it seems to be ignored.
    Can someone clarify.
    Thanks.
    Chu-chi
    "manoj cheenath" <[email protected]> wrote:
    Here is a live example:
    http://65.193.192.35:7001/base/SoapInteropBaseService
    Here is an example that you can download:
    http://manojc.com/?sample2
    This is how you run it:
    http://manojc.com/?tutorial/doc/howtorun.html
    More info can be found from the edocs:
    7.0:
    http://edocs.bea.com/wls/docs70/webserv/index.html
    8.1:
    http://edocs.bea.com/wls/docs81/webserv/index.html
    Regards,
    -manoj
    http://manojc.com
    "pushpa krishna" <[email protected]> wrote in message
    news:[email protected]...
    hi!!!
    Could you pls point to any code example.
    thanks
    Pushpa
    "Richard Berger" <[email protected]> wrote:
    Manoj: Thanks for the answer - do you have or can you point me at
    any
    code samples
    that accomplish this? (Yes, .NET is limited to strings/ints in their
    get/post
    bindings).
    Thanks so much!
    RB
    PS - Also, can you explain any apparent discrepancy between your answer
    and what
    the WL documentation stated (again, it may be my misunderstanding).
    "manoj cheenath" <[email protected]> wrote:
    WL 7.0 does allow you to access the web service through
    the browser. It even allows you to invoke service methods
    with complex type arguments (.Net only supports primitive
    types) and also to view the request and response soap
    message for the invocation.
    regards,
    -manoj
    "Richard Berger" <[email protected]> wrote in message
    news:[email protected]...
    This might be a naive question, but according to the documentation,WL 7.0
    does
    not support http post/get bindings for web services. Thus, for
    me
    to
    access a
    web service, I need to write a "middle tier" of some sort (I used
    the
    automatically
    generated Java proxy code and JSP). All works fine, but it seems
    like
    it
    would
    sure be nice to have HTML forms access web services without havingto
    write a
    middle tier.
    NET does this and it is extremely useful - is there a reason that
    BEA
    chose not
    to provide this feature? (e.g. is it architecturally unsound in
    any
    way?
    or is
    there an easy way to simulate it?). Given some of the Web Workshoppositioning
    re: ease of use and .NET comparison, this seems like an omission.
    Any insights are greatly appreciated.
    Enjoy,
    RB
    PS - Here's the info from the documentation
    Web Services Description Language (WSDL) 1.1 Specification
    WSDL is an XML-based language that describes Web services. WSDL
    defines
    Web services
    as a set of endpoints operating on messages; these message containeither
    message-style
    or RPC-style information. The operations and messages are describedabstractly
    in WSDL, and then bound to a concrete network protocol and messageformat
    to define
    an endpoint. Related concrete endpoints are combined into abstractendpoints (services).
    WSDL is extensible to allow the description of endpoints and theirassociated
    messages regardless of what message formats or network protocols
    are
    used
    to communicate,
    however, the only bindings described in the specification describehow to
    use
    WSDL in conjunction with SOAP 1.1, HTTP GET/POST, and MIME.
    Note: WebLogic Server supports only SOAP 1.1 bindings.
    The WSDL 1.1 Specification is available at http://www.w3.org/TR/wsdl.

Maybe you are looking for