OAF - Add/Import Page XML file into existing project

Friends, need little help. I have a partial oracle iExpense project installed on my machine. Mostly the custome code/packages. I have a requirement of fixing something on the iExpense seeded page below.
/oracle/apps/ap/oie/entry/header/webui/GeneralInformationPG
The problem is that it doesnt save the data if we click on the Save button at first go, and put the old values back into the fields. But right after that if we make changes again and hit the save button second time it Saves successfully. Weird eh...??? Does any body guide me what could be the possible problem? or how to resolve it?
Also my question is that GeneralInformationPG doesnt showup in my project even though it exist in the folder. So i cant realy see this XMl file in jdeveloper. How can i register it or add/import into the existing project so i could start debugging?
Thanks

Please ask this on the {forum:id=210} forum.
Timo

Similar Messages

  • How do I import one xml file into 3 separate tables in db?

    I need to utilize xslt to import one xml file into 3 separate tables: account, accountAddress, streetAddress
    *Notice the missing values in middleName, accountType
    sample xml
    <account>
    <firstName>Joe</firstName>
    <middleName></middleName>
    <lastName>Torre</lastName>
    <accountAddress>
    <streetAddress>
    <addressLine>myAddressLine1</addressLine>
    <addressLine>myAddressLine2</addressLine>
    </streetAddress>
    <city>myCity</city>
    <state>myState</state>
    <postalCode>mypostalCode</postalCode>
    </accountAddress>
    <accountId>A001</accountId>
    <accountType></accountType>
    <account>
    I need the following 3 results in 3 separate xml files in order for me to upload into my 3 tables.
    Result #1
    <rowset>
    <row>
    <firstName>Joe</firstName>
    <lastName>Torre</lastName>
    <accountId>A001</accountId>
    <row>
    <rowset>
    Result #2
    <rowset>
    <row>
    <addressId>1</address>
    <city>myCity</city>
    <state>myState</state>
    <postalCode>myPostalCode</postalCode>
    <row>
    <rowset>
    Result #3
    <rowset>
    <row>
    <addressId>1</addressId>
    <addressLineSeq>1</addressLineSeq>
    <addressLine>myAddressLine1</addressLine>
    <row>
    <row>
    <addressId>1</addressId>
    <addressLineSeq>2</addressLineSeq>
    <addressLine>myAddressLine2</addressLine>
    <row>
    <rowset>

    Use XSU to store in multiple tables.
    "XSU can only store data in a single table. You can store XML across tables, however, by using the Oracle XSLT processor to transform a document into multiple documents and inserting them separately. You can also define views over multiple tables and perform insertions into the views. If a view is non-updatable (because of complex joins), then you can use INSTEAD OF triggers over the views to perform the inserts."
    http://download-west.oracle.com/docs/cd/B19306_01/appdev.102/b14252/adx_j_xsu.htm#i1007013

  • A query while  importing  an XML file into a Database Table

    Hi,
    I am Creating an ODI Project to import an XML file into a Database Table.With the help of the following link
    http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/odi/odi_11g/odi_project_xml-to-table/odi_project_xml-to-table.htm
    I am facing a problem while creating Physical Schema for the XML Source Model.
    For the
    Schema(Schema)
    and
    Schema(Work Schema) field they have selected GEO_D.
    What is GEO_D here??
    or
    What I have to select here?
    1) schema of the xml file (NB:-I havn't created any .xsd or .dtd file for my .xml file)
    or
    2)my target servers schema
    Please tell me what I'll do??
    Thanks

    and
    Schema(Work Schema) field they have selected GEO_D.
    What is GEO_D here??This is the schema name which is specified in the XML file .
    What I have to select here?
    1) schema of the xml file (NB:-I havn't created any .xsd or .dtd file for my .xml file)Yes
    2)my target servers schema
    Please tell me what I'll do??
    Thanks

  • Is there a way to import large XML files into HANA efficiently are their any data services provided to do this?

    1. Is there a way to import large XML files into HANA efficiently?
    2. Will it process it node by node or the entire file at a time?
    3. Are there any data services provided to do this?
    This for a project use case i also have an requirement to process bulk XML files, suggest me to accomplish this task

    Hi Patrick,
         I am addressing the similar issue. "Getting data from huge XMLs into Hana."
    Using Odata services can we handle huge data (i.e create schema/load into Hana) On-the-fly ?
    In my scenario,
    I get a folder of different complex XML files which are to be loaded into Hana database.
    Then I gotta transform & cleanse the data.
    Can I use oData services to transform and cleanse the data ?
    If so, how can I create oData services dynamically ?
    Any help is highly appreciated.
    Thank you.
    Regards,
    Alekhya

  • How to import a XML file into the document?

    Hai,
    i had created a table using xml file....
    Now i want to import that xml file tabel into the document...
    Can any one tell me how to import the xml file into the document?
    thanks
    senthil

    Hai...
    this is senthil...
    i'm beginner for creating adobe indesign plugins..
    i want to import a html file in the document...
    i want to create a table by using html tags and
    that table will be imported into the document..
    How shall i do it?
    can any one plzz explain me?

  • CANNOT IMPORT FCP  .XML FILE INTO PREMIERE PRO CS5

    Hi,
    Camera used:-Sony Pmw Ex3
    Footage       :- XDCAM  sp(1440 * 1080i) PAL
    Edited in      :-final cut pro 7
    Error            :- failed  to import .xml file into premiere pro cs5
    I tried  to import the .xml file into premiere CS5 ,it asked for the media files  to relink .whn i linked the .mp4 files it showed the  error messege "The  selected file cannot be linked becouse it has 2 audio channel(s) and  the clip was created with 1 audio channel(s).
    then i tried to relink the .mov instead of .mp4 file (which i  used in final cut pro on apple machine)i got  the error "Codec missing  or unavailable"
    what should i do???..i almost done all the  editing in final cut pro and i bought the adobe coz i thought i can  finish all the pending FCP projects in Premier Pro..??

    What is the CODEC in your MOV file(s)? MOV is but a "wrapper," like AVI. This ARTICLE will give you some background. It could be that you just need the proper CODEC, or it could be that it is a Mac-only CODEC, and then you will need for the producer to Export in another CODEC, that is PC-compatible.
    This ARTICLE will give you some background on CODEC's, in general.
    Good luck,
    Hunt

  • How to add the library of linphone into existing project ?

    How to add the library of linphone into existing project ?

    How to add the library of linphone into existing project ?

  • Import an xml file into adobe designer field using javascript

    Adobe javascript experts ,please help me.
    I need to load the data from an xml file into a text field in designer
    using javascript and then go through each node in the loaded xml and compare that with form fields in designer and if matching fill the value(node's value from the loaded xml) in form fields.
    Please give ur suggestions.
    Thanks in advance!!!
    regards,
    sowmya

    Thanks for the fast response.
    I saw your example and specifically the javascript code
    xfa.host.importData("filename.xml").
    Just by giving this alone how do I access the values in the xml???
    Just by giving the above javascript, my value is not getting populated when I see in pdf preview.
    But apart from that you have done dataconnection also and binding in all the columns.What is this for??
    Could you kindly explain what u r doing step by step??
    Thanks again.
    regards,
    Sowmya

  • How to add one poi jar file into webdynpro project

    Hi all:
        We would like to add one poi jar file into one webdynpro project, however, what should we do ?
        Its one external 3rd party jar file.

    Hi,
    To add a jar file you need to have an external library DC.
    Hope the below link will help you:
    [http://help.sap.com/saphelp_nw70/helpdata/en/46/3ce3e4df201d63e10000000a11466f/frameset.htm]
    thanks & regards,
    Manoj

  • How can I import a .AVI file into my project?

    I want to import a .AVI file into my video project but Final Cut Pro will not import it. Final Cut says the file is not recognized but it plays with Quicktime.

    Jamison S wrote:
    DJ OZA,
    Do you get the warning "Media files are not optimized for FCP. Either recapture the media or use Media Manager to crate new copies of the files to improve performance for multi-stream playback."?
    What does this mean?
    I can import and edit the files no problem either, except for that waring, which concerns me.
    It means you will not be able to use the multiclip feature with these files because your Macintosh is working very hard to decode them on the fly. More than one stream will choke your machine.
    Your AVIs are visible in FCP because you happen to have acquired an AVI file that uses a codec you have available on your machine.
    AVI isn't even supported by Microsoft; it's been a totally concatenated delivery wrapper for more than a decade. It only survives because of entrenchment.
    Use Get INfo on one of your AVI clips, figure out what codec was used, use Google to find out what you can about the codec, and decide how you want to proceed. You want to determine what your output is going to be and work backwards from that decision. For instance, if you're going to distribute a standard MPEG2 DVD, you want to edit using conventional DV. Transcode you AVI files to DV using Compressor.
    Your easiest solution will be to edit on a PC that does handles the AVI natively or to contact whoever gae you the files and demand they provide you with clips you can edit on a Macintosh.
    bogiesan
    Message was edited by: David Bogie Chq-1

  • How to import multiple XML files into one inDesign document without copy/paste ?

    I use InDesign CS6, and I have several XML files with the same structure. Only the data are different.
    I created  an Indesign layout with some tagged placeholder frames on merge mode, for automated layout.
    Today for each XML file I have to create a new InDesign document to import the XML. Everything works fine. Then in order to have all Indesign layouts one after the other into a single Indesign layout, I have to use the copy/paste function.
    I mean for example, copy the contents of all documents to the first one. Or add pages of other documents to the first one, then delete spaces between each page.
    So my question is the following:
    How to repeat this process without copy/paste function, knowing that the
    number of XML files could be unknown.
    Thank you very much for your answer.

    Yes, effectively I would like to catalogue the files into one collection so i can save as one PDF and Print as one.:)
    I know I could save each AI as a pdf them then merge the pdf's together in acrobat, but I have nearly 100 files so would feel more comfortable seeing them all together before print / saving.
    My concern is that if I insert them in Ai, will the file resolution reduce? and will the ai still be editable and would it update the indesign file?
    Thanks for the quick reply

  • How to import the xml file into bcc?

    My input file to atg is xml which contain category or products assets.
    I want the scheduler to run in such a way that it should auto create a project and send an email to client for approval.
    When the client approves the xml file,then run the scheduler to input the xml file datas into bcc.
    i will be using : SingletonSchedulableService for this
    Give me a guidance for the same.
    Thanks in advance.

    I want to implement this in bcc.
    Which listener will listen for the approval of the client for the email (which contains the xml to import)we sent to him?
    You would have to do custom development to hook your custom workflow with the inbound email. For sending email notifications the action is already there and while creating its element in ACC you can specify a JSP for the email template. You may refer following relevant documentation:
    Oracle ATG Web Commerce - Workflows
    Oracle ATG Web Commerce - Workflow Action Elements
    I recommend to refer the existing DeploymentEmailer source in <ATG>\Publishing\samples\Java and see different DeploymentEvent types and states can be used based on your requirement in your custom component. Also refer these API javadocs to know about the available deployment events and process:
    DeploymentEvent (ATG Java API)
    DeploymentServer (ATG Java API)
    ATG does have a /atg/dynamo/service/POP3Service component to retrieve mails from a POP3 e-mail server but it is primarily used for detecting the bounced email. Not too sure if it would help or fit in your case but still you can go through about its details to know what is already there:
    Oracle ATG Web Commerce - Bounced E-mail
    You may also refer to the InboundEmail event and API javadocs for InboundEmailMessage which are used in this bounced email detection feature:
    Oracle ATG Web Commerce - InboundEmail Event
    InboundEmailMessage (ATG Java API)
    Now based on all this, if you extend and customize a lot of things it would be bit complex and tedious to detect the inbound approval mail based on its content and then advance your workflow. Another approach can be to put a URL in the mail template of your notification email which the approver would have to click and on the landing page you can authenticate and advance your custom workflow as required.

  • How to import premier xml file into FCP X?

    Hi There,
    Premier has an export to "Final Cut Pro XML" option but how do you import these files into FCP X?
    If I navigate from within FCP X, the file is greyed out and if I right click from the finder and open in FCP X I see the error:
    The document “V1-0008_M07-1538.mov.xml” could not be opened. Final Cut Pro cannot open files in the “XML text” format.
    I'm using FCP 10.1.1 and Premiere Pro CC 7.2.1
    Any pointers in the right direction would be much appreciated.
    Cheers

    Looks like this is the only option: https://itunes.apple.com/us/app/7tox-for-final-cut-pro/id496926258?ls=1&mt=12

  • How to Import XML file into SAP B1

    Dear All,
    I have a scenario like,
    I am receiving a XML file from a 3rd party application for the daily Creation,Update of Item Master,BP Master, Marketing Documents. I want to import this file into SAP B1 through its approp objects. I understand DTW has limitation in its file types (Semicolo,Tab,Comma,ODBC). How do i do this ? Please guide me.
    Thanks,
    Thanga Raj K

    Hy folks,
    I´m frim Brasil and I've been studying the tool EFM (Eletronic File Manager) to learn more about it!
    There I saw that we can extract to XML "any" infomation from the database we want, mainly through the GEP.
    However, as I've seen, this Add-On can not import any XML file into SBO, unless for the BFP wich can be imported in conjunction with the BTHF Add-on.
    So I ask: how is it possible to import XML data into SBO database? Is it possible to be done through the EFM? or  it´s really necessary to write a code specifically to do that?
    Besides, I know that de B1iSN fit to this necessity... but when I tried to use it, by the custom "object" for BP, for example, there are some data wich the mapping conteined in this custom "process" that can not be imported... I tried to understand how to map those other fields not imported by the custom but this has been dificult to me as I am a implementation consultant focused in administrative process not on development...
    Could you please help me with this subject!
    Thanks a lot,
    Denis

  • How to import iTunes XML library into MS Acess database?

    I have exported my iTunes data to a library XML file. When I try to import these data to a MS Access database (without the sound files of course) I only get strange and stupid table entries.
    I would like to use MS Access to create more flexible reports of my music collection.
    Has anyone ever imported iTunes XML files into MS Access successfully?
    P.S. An import solution to OpenOffice.org as alternative is also appreciated.

    In iTunes, you can "Export Song List" and one of the other options is to export as a text file. This actually creates a comma or tab separated values file, which is a lot easier to import into Microsoft stuff than the XML file is.

Maybe you are looking for