OAF :HOW To Configuration - Application Level Setup

Hi friends
I have a doubt that
I developed .jws and.jpr in my jdeveloper tool ...
How can we move that .jpr to my server in oracle application
and how can we bounce apache
please give your suggession
with any example
Thanks
thilib

Graceful bounce of Apache on R12.
Re: How to Bounce Apache or OC4J for OAF Development
Thanks
--Anil
http://oracleanil.blogspot.com

Similar Messages

How to configure the Easy Setup to match the sequence type for playback

Plesae provide some suggestion for how to configure the Easy Setup in FCP 6.05.
*Uncompressed HD 8-bit (1920 x 1080p30)video streams
e.g:
1. Choose Final Cut Pro > Easy Setup.
2. Choose ?? from the Format pop-up menu
3. Choose “all rates” from the Rate pop-up menu.
4. Click the USE pop-up menu, choose which format?
Also how about Uncompressed SD 8-bit (720 x 480p30) video streams ?
Thanks,

Thanks for the advice.
In the project, I created two sequences.
Import all my HD 8-bit clips into sequence 1, and say yes to mach the format
and import all my SD 8-bit clips into sequence 2 and say yes.
In Sequence-> setting-> I verified the configuration as following:
However, that is "Load sequence preset" button, I am not sure what is that for and also do I need to go to Final cut pro -> easy setup to configure the format again?
I just want to playback all my HD clips to make sure no dropped frame and
then playback my SD clips sequence to make sure the performace are OK.
Here are the format for HD clips:
HD 1920x1080 HDTV 1080i (16:9); upper; uncompress 4:2:2.
Here are the format for HD clips:
SD 720x480 NTSSC DV (3:2), NTSC-CCIR601, lower , uncmpress 8-bit 4:2:2.

How to configure Audio MIDI Setup?

How does one configure Audio MIDI Setup?
With every reboot of the system, the values revert to 44100.0 Hz, 2ch-24bit integer. I suppose these are the default values, but my most used software (Finale 2012) requires the Built-in Output to be set to 44100.0 Hz, 2ch-16bit integer. It is a real pain having to dig into the Utilities folder, boot the Audio MIDI Setup and reset the values every single day.
Is there a way I can make the required values stick through reboots or modify the default values? Thanks in advance!

Ok, this is pretty simple to fix. First of all, even if there's a breakout cable at the Firebox for both midi and S/PDIF, you're not connected on S/PDIF but on the midi in. This is not related to your problem but important to know.
Now, to the problem: you use two different interfaces: the Firebox and the computer built-in. Since those are two different drivers and Logic can talk to only one driver at once, you have to set-up an Aggregate Device in AMS. Open AMS, select the audio tab and from the audio menu, select Open Aggregate Device Editor. There, create a new device with both the Presonus and the built-in. Now, all you have to do is going back to Logic, open the audio preferences, select the drivers tab and select the aggregate device.

How to configure Applications in workspace

I am intergrating OBIEE 10134 with EPM Workspace version 11.
As a very fresh fish to hyperion EPM, I'd like to knwo after installation, how to configure the "Applications" link and make it shows through Navigator in workspace. And the left pane of File - Peferences, how can I add something to the Pane( for example, Oracle BI)?
Any doc. or instruciton will be appreciated.

Hi,
You can create a folder by pressing the "New" button in the top-left corner of the interface.
One thing you might be having trouble with: to create a new folder you have to have a Workspace selected. You can't create a new folder in the "All Files" section.

How to configure Application module pooling?

I want to know wheather bc4j container itself manages Application module pooling if yes then please tell me is there any file to set parameters for congiguration like one which we have for apache web server.
If no then please let me know how to create applicatiom module pooling.
Thanks in advance.

Application module pooling is configurable through an application module configuration. In order to edit an application module configuration you may right click an application module and select Configurations...
The BC4J data web beans and the BC4J JSP datatags are both application pool clients. The BC4J documentation includes descriptions of the application pool properties. The documentation also includes a code sample which illustrates how to write your own pool client.

How to configure Service Level Reporting???

Hi All,
I have to configure Service Lever Reporing (SLR) on my solution manager for managed systems. Can any one please help me in configuring it? A Step-by-step explanation will be a great help.
Waiting for your kind responses.
Regards,
Faisal

Hi Jared,
Thanks for sharing the link. I have gone through the link.
However, when I edit the "Setup Service Level Reporting" by click the link under "Solution Monitoring->Service Level Reporting" under "Operations Setup", I could get the screen where in I found the below details:
1. Setup SL Reporting (On the left Pane)
2. Variants Administration (under the above head tree)
On the right pane, I could find:
1. Name
2. Type
3. Weeday of Processing
4. Active
5. Date of Next Report
I could successfully give the above details and saved it. However, I dont see any provision for seleting the system SIDs as mentioned in the help.sap.com site proposed by you.
May you help me in selecting the System SID for which I need to declare SLR?
Regards,
Syed

E72 - How to configure application shortcut list

I'm trying to reconfigure the Home Page on my newly acquired E72. I understand how to select the application shortcuts to be used. What I don't understand is how to make an application appear in the list I can choose from. If I install a new application (or remove an old one) is there a way of editing this list ?
Thanks
Chris - London

Are you sure the Noki bookmarks aren't stored in the web browser somewhere? If not, then that really is strange.
I don't know if anybody here can give a more technical answer. If I had to guess, I'd say the application list springs from one of the .rsc files commonly installed with a .sis package. See C:\resource\apps\ (files usually/always protected) and also get yourself a copy of SisXplorer (Windows program). There is a Symbian OS book available free online at http://www.developer.nokia.com/Community/Wiki/Symbian_OS_Internals and also a Nokia developers board at http://www.developer.nokia.com/Community/Discussion/ (currently offline, after being hacked) where you could likely get more information.
And if I've way overblown the question, the straightforward answer is that the list is OS-maintained and protected from user tampering. If those Noki bookmarks aren't stored in the browser, you'll likely just have to ignore them.

Configuring multiple level approval workflows

Hi,
1. I would like to know how to configure multiple levels of approval in a workflow.
For example, when a user self registers himself, the request must be sent to level1 manager and after his approval it must be sent to level2 manager for final approval.
2. I would like to know the difference between "provisioning" and "provisioned".
Path : Process definition->task->TasktoObjectStatusMapping
Thanks in advance

Hi,
For question no 1.
1.You need to create a approval process.
2.Create a approval task for example "Approve by Manger1". assign this to Manager level 1.If its not static assignment then you need to create task assignment adapter.
3.Create another approval task for exmaple "Approve by Manger 2" assign this to manager level2.
4.Have the 2nd task depends one first one so that until one is completed 2nd one will not start.
For question 2.
Provisioning status refer to when provisioning process is not complete.
Provisioned status refer to when provisioning process is complete.
You can map this status on the completion or rejection of any task.Usually provisioned status is mapped with success of create identity task.
Let me know if you have any more questions.
Regards
Nitesh

Install PeopleTools 8.53 with Linux Issue: Configure Application Server using psadmin

Folks,
Hello. I am installing PeopleTools 8.53 Internet Architecture. Database Server is Oracle Database 11gR1. OS is Oracle Linux 5. I have installed JDK7, WebLogic 10.3.6, Tuxedo 11gR1 and PeopleTools 8.53 successfully into Oracle Linux 5. I have set up PeopleTools 8.53 Database Instance into Oracle Database Server successfully. Data Mover and Application Designer login into the Database Instance successfully. Web Server has been configured successfully.
Now, I confront the issue regarding configuring Application Server as below:
In Windows, I run /PT8.53/appserv/psadmin.exe to create a domain for the PeopleTools Database Instance successfully. But in Linux, the file /PT8.53/appserv/psadmin is light blue color and not executable, I try to run it in the following way:
[user@userlinux appserv]$ ./psadmin
Its output: ./psadmin: error while loading shared libraries: libtrio64.so: cannot open shared object file: No such file or directory
My question is:
Can any folk tell me how to configure Application Server using psadmin in Linux for PeopleTools Internet Architecture ? How to solve the above issue ?
Thanks.

Folks,
Hello. Thanks a lot for replying. I run psadmin in the way below:
[user@userlinux PT8.53]$ . ./psconfig.sh
[user@userlinux appserv]$ export TUXDIR=/home/user/Oracle/Middleware/tuxedo11gR1
[user@userlinux appserv]$ export LD_LIBRARY_PATH=$TUXDIR/lib:$LD_LIBRARY_PATH
[user@userlinux appserv]$ export PATH=$TUXDIR/bin:$PATH
[user@userlinux appserv]$ ./psadmin
For Application Designer login, I use UserId PSADMIN and password PSADMIN, it works successfully.
For Data Mover Bootstrap Mode login, I use UserId MYNAME and password MYNAME, it works successfully.
When configure Application Server, I use UserID PSADMIN and password PSADMIN. But when boot the domain, the current server log file "APPSRV_0919.LOG" indicates that "Database Signon: Could not sign on to database PT853 with user PSADMIN."
Then I use UserId MYNAME and password MYNAME to configure the Application server again. I boot this domain again. Strangely, the log file APPSRV_0919.LOG gets the same error message "Database Signon: Could not sign on to database PT853 with user PSADMIN."
I purge the cache and clean IPC resources of this domain, and boot this domain again but get the same error message as above.
The content of current server log file /home/user/psft/pt/8.53/appserv/PT853/LOGS/APPSRV_0919.LOG is below:
PSADMIN.5732 (0) [2013-09-19T11:01:10.841](0) Begin boot attempt on domain PT853
PSAPPSRV.9537 (0) [2013-09-19T11:01:30.338](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.9537 (0) [2013-09-19T11:01:30.484](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.9537 (0) [2013-09-19T11:01:30.539](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora64 (200,0)
PSAPPSRV.9537 (0) [2013-09-19T11:01:30.548](0) Database Options: override_connection_reset: 0
PSAPPSRV.9537 (0) [2013-09-19T11:01:30.550](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PT853 with user PSADMIN.
PSAPPSRV.9537 (0) [2013-09-19T11:01:30.551](0) Server failed to start
PSADMIN.5732 (0) [2013-09-19T11:01:38.906](0) End boot attempt on domain PT853
PSADMIN.10674 (0) [2013-09-19T11:02:20.766](0) Begin boot attempt on domain PT853
PSAPPSRV.11239 (0) [2013-09-19T11:02:34.736](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.11239 (0) [2013-09-19T11:02:34.823](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.11239 (0) [2013-09-19T11:02:34.848](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora64 (200,0)
PSAPPSRV.11239 (0) [2013-09-19T11:02:34.854](0) Database Options: override_connection_reset: 0
PSAPPSRV.11239 (0) [2013-09-19T11:02:34.855](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PT853 with user PSADMIN.
PSAPPSRV.11239 (0) [2013-09-19T11:02:34.856](0) Server failed to start
PSADMIN.10674 (0) [2013-09-19T11:02:41.270](0) End boot attempt on domain PT853
PSADMIN.5107 (0) [2013-09-19T11:56:37.435](0) Begin boot attempt on domain PT853
PSAPPSRV.5182 (0) [2013-09-19T11:56:57.842](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.5182 (0) [2013-09-19T11:56:58.068](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.5182 (0) [2013-09-19T11:56:58.134](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora64 (200,0)
PSAPPSRV.5182 (0) [2013-09-19T11:56:58.142](0) Database Options: override_connection_reset: 0
PSAPPSRV.5182 (0) [2013-09-19T11:56:58.144](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PT853 with user PSADMIN.
PSAPPSRV.5182 (0) [2013-09-19T11:56:58.145](0) Server failed to start
PSADMIN.5107 (0) [2013-09-19T11:57:05.737](0) End boot attempt on domain PT853
PSADMIN.4966 (0) [2013-09-19T18:55:48.131](0) Begin boot attempt on domain PT853
PSAPPSRV.5009 (0) [2013-09-19T18:56:08.869](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.5009 (0) [2013-09-19T18:56:09.071](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.5009 (0) [2013-09-19T18:56:09.130](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora64 (200,0)
PSAPPSRV.5009 (0) [2013-09-19T18:56:09.138](0) Database Options: override_connection_reset: 0
PSAPPSRV.5009 (0) [2013-09-19T18:56:09.140](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PT853 with user PSADMIN.
PSAPPSRV.5009 (0) [2013-09-19T18:56:09.141](0) Server failed to start
PSADMIN.4966 (0) [2013-09-19T18:56:16.253](0) End boot attempt on domain PT853
PSADMIN.4966 (0) [2013-09-19T19:40:11.049](0) Begin boot attempt on domain PT853
PSAPPSRV.6475 (0) [2013-09-19T19:40:26.633](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.6475 (0) [2013-09-19T19:40:26.731](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.6475 (0) [2013-09-19T19:40:26.776](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora64 (200,0)
"~/psft/pt/8.53/appserv/PT853/LOGS/APPSRV_0919.LOG" 64L, 7012C
My question are:
1) I have changed UserId from PSADMIN to MYNAME and password from PSADMIN to MYNAME in Application Server configuration, why the log file APPSRV_0919.LOG gets the same error message "Database Signon: Could not sign on to database PT853 with user PSADMIN." ?
2) I purge the cache and clean IPC resources of this domain and reboot this doamin, why the log file APPSRV_0919.LOG gets the same error message "Database Signon: Could not sign on to database PT853 with user PSADMIN." ?
3) How to solve the above issues ?
Thanks.

Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.

I've copied a .NET application from an older 2008 server running IIS 7.0.600.16386 to a newer 2008 R2 server running 7.5.7600.16385. The .NET framework version is 4.0.30319. I've setup an application pool and copied the wwwroot directory.
I've checked for nested web.config files and I've been reading a lot about converting the site to an application. The older server running the application is still up and running and the configurations look identical. If I convert the site to an
application the icon changes and doesn't look like it does on the old server. I'm new and still learning the basics of programming and publishing applications. Can someone point me in the right direction? I've been on google for a few days
to no avail. Thanks.
Description:
An error occurred during the processing of a configuration file required to
service this request. Please review the specific error details below and modify
your configuration file appropriately.
Parser Error Message: It
is an error to use a section registered as
allowDefinition='MachineToApplication' beyond application level. This error can
be caused by a virtual directory not being configured as an application in IIS.
Line 20:       <add path="Telerik.Web.UI.DialogHandler.aspx" type="Telerik.Web.UI.DialogHandler" verb="*" validate="false" />
Line 21:     </httpHandlers>
Line 22:     <authentication mode="Forms">
Line 23:       <forms cookieless="UseCookies" loginUrl="~/AccessDenied.aspx" protection="All" name="TVHRFORMAUTH" timeout="180" slidingExpiration="true" />
Line 24:     </authentication>

Hi,
I agree with Tim that we can ask for better help in the following IIS forum.
IIS.NET forum
http://forums.iis.net/
Best regards,
Frank Shen

How to Migrate Row Level Security Configuration

Hi Guys,
Does anybody know how to migrate row level security configuration? I suppose PeopleSoft provided a data mover script, like securityexport.dms.
Thank you in advance,
Bob

Here are two options to achieve what you want.
A. You can do this by coding, that's if you are ready to. Are you? If yes then try the steps below:
1. create a security codes table. Say for example
001 - company a
002 - company b
2. create a security table that will list all users and which company they should have access to. You can also implement this by roles.
3. alter all tables in the application schema to add a security code column. This will be a foreign key reference to table created in 1 above.
4. update all data in the tables according to which company they belong to.
5. write a procedure or package that does a validity check whenever a user requests for data. This procedure/package determines which company data the user has access/rights to.
With this, you should be able to achieve what you want if you do not want to spend on VPD and FGAC. The problem comes where there are users who would have cross access to data from both companies. In this regard, then you have to modify your security table a little bit to handle this.
B. This option i will admit is not so clean. You can also achieve this by two different views for every table in the application schema. And on each of these views, create a private synonym for every user. For illustration purposes:
Table name = Employee.
Create a view employee_a on employee
create a view employee_b on employee
Let's say you have users x and y. X has access to employees of company a and y has access to employees of company b. You can now create private synonyms for each of these users as follows:
create synonym employee on employee_a in x schema.
create synonym employee on employee_b on y schema.
This i have not tried but believe should work.
Hope one of these options serve your purpose.

How to configure request manager service for multiple website in one web application

I have set up sp 2013 as below:
web application : wa1
site collection : sc1
sp site: site1, site2
I used 2 WFE, 1 APP, how can I use request manager service to control site1 to wfe1, site2 to wfe2?
Awen

That's not what i'd describe as load balancing.
A better description would be load-isolation. In your description then if the load on site1 was large (and growing) but site2 was quiet then site1 would struggle and eventually become unable to handle the number of users but site2 would still be ok. That's
fine from a QOS point of view but it's not the norm for load balancing. It would work in simple scenarios but the out of the box load balancing tools are much better suited than that sort of approach.
This article shows how to configure the RMS and may help show how your request is difficult to configure:
http://www.harbar.net/articles/sp2013rm2.aspx

How to keep an application level object running with SunIDM?

We are working on intergrate a gmail project with SunIDM. We need an application level object running with SunIDM so it will maintain a token generated from Gmail side. In anther servlet project, I had this object saved in the attribute of the ServletContext, then other session level servlet could share this attribute anytime. Is there a way to store attribute in Servlet Context and have it shared by different user session in SunIDM? I have been reading documents and searched this forum, haven't find any topics related how to maintain an application level object live. Hopefully that I can get some hint here.
Thank you so much.

Paul, Thank you so much for the further explaination. I don't think it will work since the token generated from gmail will expire every 24 hours.
We are using the gdata library published from by gmail people, and I create a new UserService object and have it run in the application level. The UserService object will generate a token and renew it every 24 hours behind the scene. Here is how I implement it in my Servlet project:
//to have a UserService object running at the application level:
public class GmailUserService extends HttpServlet {
public void init(ServletConfig config) throws ServletException{
super.init();
userService = new UserService(myApplication);
config.getServletContext().setAttribute("gmailUserService", userService);
//to access this UserService object from other servlet in each user session:
UserService userService = (UserService)servletContext.getAttribute("gmailUserService");
Gmail will trigger an error if we create a new UserService object for each user. They recommend to have all the user to share one UserService object. I am looking for similar approach in SunIDM.
Thank you again, Paul, for trying to help.

How to configure ADF application to use OAM Identity Assertion ? web.xml

We have a web application developed using ADF (application development framework) and deployed on WebCenter 11.1.1.2 (weblogic 10.3.2)
OID Authentication and OAM identity assertion is configured in WebLogic 10.3.2 .
How to configure security in ADF application (web.xml or weblogic.xml) so that it uses OAM identity assertion (already configured as authentication providers in weblogic server)
Any pointers or documentation so that application (developed using ADF) check for identity tocken and verifies it with one of identity assertion providers.

John,
I have to concur. With OAM you don't need this. OAM intercepts the calls and inserts a cookie for WLS to get user information from.
I strongly advise to go through the above mention OFM Security Guide. Esp. Chapter 10 tells you in every detail how to implement OAM SSO with WLS (with or without OHS as a proxy).
Reading this chapter saves you time and turnarounds on this topic...
--olaf

How to configure single web server instance to multiple application servers..

Hi all,
we are running single instance of IWS6.0 SP2 on solaris, we want to comfigure this single instance to multiple application servers(JRun). Can any one advise me whether it is possible to do.
Thanks
Raj

Hi Raj,
"how to configure single web server instance to multiple application servers.."
It's not possible for setting up multiple applicataion servers for Single iWS instance.
Thanks,
Dakshin.

OAF :HOW To Configuration - Application Level Setup

Similar Messages

Maybe you are looking for