OAF :I need to show totals for columns that breaks on one of the column in Advance Table
I am using advance table (AT),
I have a requirement to calculate totals for few columns in the AT, based on the account number ( totals should break on the account # , as shown below )
Please help.
Account
Desc
Paid Amt
AP Credit
acc1
desc1
200
100
acc1
desc1
300
100
acc1
desc1
400
100
Total 900
Total 300
acc2
desc2
150
50
acc2
desc2
250
50
acc2
desc2
100
150
Total 500
Total 200
Message was edited by: 85de445e-a75a-4f2f-b086-8cb6abb09c5d
CAN ANY ONE PLEASE PROVIDE ANY INPUTS.. , AS ITS URGENT ! Thanks in advance.
Any updates on this please !!! ?
Please suggest if this can be achieved by any other region type or any specific type to be used ??
Similar Messages
-
The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns A & B but if I cut and paste the table to a new sheet, the columns I am missing will travel to the new sheet. I have charts and other stuff related the the original table so I need to figure out why I can only see from column C forward. I tried to "UNHIDE" the columns but the function doesn't seem to recognise that there are columns missing. Has this happened to others and how did you fix it?
I've seen it happen before, or at least it sounds something like what I've seen before. The table somehow gets into the margins of the page and the app doesn't know how to deal with it. Go into Print View and try moving the table away from the left side ofthe page. You might have to change content size or resize the table to get it to correct (then put you can put them back the way you like).
-
Tool icons, navigation, elements need to be larger for those that want it
I have read through many forums from May 2012 right up through the current ones about this issue. There are a lot of Photoshop users who are complaining about the size of tool icons and other elements as being way too small. Then there are others who defend the size of Photoshop and some who say the icons haven't really changed. Finally, there are some who say Adobe will not do anything about this.
Let me offer a perspective as a 15 year user of Photoshop and other Adobe products. Under the earlier versions of CS, Photoshop would follow the Windows sizing instructions inputed by the user. So if we wanted everything to be large and 150% of normal size, Photoshop would follow those instructions regardless of the monitors resolution. In CC especially, it appears Adobe has abandoned any connection in its software to what the user has defined in Windows about sizing. This isn't so much about the actual size as defined in Adobe's code but how those sizes vary or don't vary based on Windows settings.
This is no minor matter. We are now working on a high resoltuion, 23" Apple Cinema Monitor at top resolution. We do that to get maximam clarity. At the same time, we know that we cannot possibly use any software that looks as small as it would in that resoltuion without adjustment. So we turn around and crank Windows up to maximum oversize in every setting that exist. The result is that desktop icons show at the size we want and other major software also shows at the size we want. The best example is Cubase which is a professional digital audio workstation. Cubase is to muisic what Photoshop is to images. Both highly professional tools. The difference is that even in high resolution, Cubase defers to the Windows sizing. All the icons, menus, navigation bar, track workspace and more are very large just like the icons on our desktop.
This means that we know it is possible and not difficult for all software to follow the Windows settings inspite of the native resolutlion. So far Adobe has chosen not to do this. Below is a screen shot of PS CC on our monitor (actually 2 monitors with Apple Cinema on the left where PS is). Unlike all the screen shots that have been shown by others during the last 18 months, we made sure that our desktop icons could be clearly seen as well. Notice the size difference between PS icons, navigation and elements versus our desktop icons. Cubase looks like our desktop icons. So why can't PS?
It is our recommendation that Adobe do the following immediately. You can't ignore 18 months or more of complaints from a large number of users without addressing the problem. The world has gone to high resolution monitors but for many of us, we need the size of software to be larger than the native resolution we are using. It's not a matter of dropping the resolution. That is not desirable and not necessary based on our actual experience. That produces other types of problems with lack of clarity that don't work. Try to select a single strand of a sound wave when there are one hundred a second in low resolution. We need the resolution but we also need the software to show larger for those that want it. For those that don't, you may be happy but why should everyone else be unhappy or unable to use the new software.
1. Provide a yes/no option to allow Adobe CC to follow the Windows sizing settings inspite of monitor resolution. Those that don't want to do this can leave it no. Those that want it can turn it on and make the entire program look bigger.
2. Provide internal CC settings to increase the size of any and all visual workspace elements and tools on a percentage basis for maximum flexibility. There may be good reasons why some people don't want to change their Windows sizing but do want to increase the visual size of CC programs.
Frankly, this is not rocket science and I'm amazed Adobe didn't jump on solutions after the 2012 forum discussions. To hear from people that nothing is gong to be done is scary for the user and should be scary for Adobe since it could result in losing customers and sales. Let's make this program work for all users on all resolution monitors in the way they need it to work. Other major software companies have done this. Why is Adobe the odd company out on this.Thanks for your thoughtful answer. I do appreciate the issues here.
I'm aware of the problems in how applications work in an OS when that OS keeps changing (too much?!). Yes, this could be very consuming from a resource perspective and could take some time.
That's why my second recommendation addresses this problem without having to worry about the OS. It is not a huge resource or time issue for Adobe to provide internal sizing controls for all aspects of its software that have nothing to do with the OS or the resolution of monitor. We've had that sizing control for how big the file we are working with shows on the screen since Photoshop 1.0. I am aware of applications that added such sizing controls over 10 years ago and one of them over 15 years ago. This isn't new.
So let's put aside the disucssion about the OS and just focus on a way to define how big the entire PS program shows including all tools, elements and navigation on a percentage basis. Just an addition to the internal Preferences of the program itself. If I want PS to show at 200% or 300% of it's standard size, let me do it
The time and resources to add this to the program are not huge. Further, since this issue has been discussed for a long time, it should have been much higher on the priority list. If I was running product development, I would have made this a mandatory part of the introduction of CC. The number of complaints are simply too high to ignore this or say that it's going to take time. That tells me it's not a high enough priority on the development list.
Let's remember that for every person who does complain on these forums, there are a hundred or more that don't but are experiencing the same thing. The small size of PS tools, icons, elements and text is simply unacceptable to too many users for it to have gone on unaddressed this long. -
I have downloaded ADE 3 on my macbook. It did recognize my Aluratek Libre the first time I used it but now it does not. I plug my libre in start ADE and the Libre does not show up for me to transfer my ebooks from the library to my libre. Help pls
If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141 -
I rented the movie "Green Hornet". It was downloaded but when i try to play it black screen shows up for some time and then I'm the home screen.
Hi runner_girl7585,
Thanks for using Apple Support Communities. If you weren't ever able to watch your rental movie, you can report this to the iTunes Store:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Cheers,
- Ari -
How to give more relevance to one of the column in multicolumn datastore
Hi Gurus,
While using multicolumn datastore needed to give more importance to one of the column than the other one. How can we achieve the same ?
SQL> create table test_sh4 (text1 clob,text2 clob);
Table created.
SQL> alter table test_sh4 add (text3 clob);
Table altered.
SQL> begin
2 ctx_ddl.create_preference ('nd_mcd', 'multi_column_datastore');
3 ctx_ddl.set_attribute
4 ('nd_mcd',
5 'columns',
6 'replace (text1, '' '', '''') nd, text1 text1,replace (text1, '' '', '''') nd, text1 text1');
7 ctx_ddl.set_attribute ('nd_mcd', 'delimiter', 'newline');
8 ctx_ddl.create_preference ('test_lex1', 'basic_lexer');
9 ctx_ddl.set_attribute ('test_lex1', 'whitespace', '/\|-_+');
10 end;
11 /
PL/SQL procedure successfully completed.
SQL> create index IX_test_sh4 on test_sh4 (text3)
indextype is ctxsys.context
parameters
('datastore nd_mcd
lexer test_lex1')
/ 2 3 4 5 6
Index created.Here while querying how can I give more relevance to text1 column than text2 column ?Every time that you post code, whatever you are using eliminates all formatting and changes any multiple spaces to single spaces, so it makes it hard to tell what your code really is. Within the function, you need to remove the special characters and double spaces before you use the string for anything else. In the first part of your output string, you were only putting a % in front of the first word and after the last word. I fixed it so that it puts % before and after every word. I also added some code to return a score of 100 when an exact match is found in any column. You can use the function in a select from dual to see what it is returning. Please see the demonstration below. I will provide a copy of the function in a separate post that you can copy and paste. You may want to adjust the values that you multiply by. The values of 10 and 5 and .5 and .1 were just examples.
SCOTT@orcl_11gR2> create table test_sh (text1 clob,text2 clob);
Table created.
SCOTT@orcl_11gR2> alter table test_sh add (text3 clob);
Table altered.
SCOTT@orcl_11gR2> insert all
2 into test_sh (text1, text2, text3)
3 values ('staple card', 'word2', 'word3')
4 into test_sh (text1, text2, text3)
5 values ('word4', 'staple card', 'word5')
6 into test_sh (text1, text2, text3)
7 values ('staplecard', 'word2', 'word3')
8 into test_sh (text1, text2, text3)
9 values ('word4', 'staplecard', 'word5')
10 into test_sh (text1, text2, text3) values
11 ('Weber Genesis S-310 Gas Grill',
12 'Weber Genesis S-310 Gas Grill',
13 'Weber Genesis S-310 Gas Grill')
14 select * from dual
15 /
5 rows created.
SCOTT@orcl_11gR2> begin
2 ctx_ddl.create_preference ('nd_mcd', 'multi_column_datastore');
3 ctx_ddl.set_attribute
4 ('nd_mcd',
5 'columns',
6 'replace (text1, '' '', '''') nd1,
7 text1 text1,
8 replace (text2, '' '', '''') nd2,
9 text2 text2');
10 ctx_ddl.create_preference ('test_lex1', 'basic_lexer');
11 ctx_ddl.set_attribute ('test_lex1', 'whitespace', '/\|-_+');
12 ctx_ddl.create_section_group ('test_sg', 'basic_section_group');
13 ctx_ddl.add_field_section ('test_sg', 'text1', 'text1', true);
14 ctx_ddl.add_field_section ('test_sg', 'nd1', 'nd1', true);
15 ctx_ddl.add_field_section ('test_sg', 'text2', 'text2', true);
16 ctx_ddl.add_field_section ('test_sg', 'nd2', 'nd2', true);
17 end;
18 /
PL/SQL procedure successfully completed.
SCOTT@orcl_11gR2> create index IX_test_sh on test_sh (text3)
2 indextype is ctxsys.context
3 parameters
4 ('datastore nd_mcd
5 lexer test_lex1
6 section group test_sg')
7 /
Index created.
SCOTT@orcl_11gR2> create or replace function text_format
2 (p_string in varchar2)
3 return varchar2
4 as
5 v_string varchar2 (32767);
6 v_string_out varchar2 (32767);
7 v_string_in1 varchar2 (32767);
8 v_string_in2 varchar2 (32767);
9 V_TOKEN VARCHAR2 (32767);
10 BEGIN
11 -- remove special characters and double spaces before using in anything else:
12 v_string := trim (translate (p_string, '/\|-_+&', ' '));
13 v_string := replace (v_string, '''', '');
14 while instr (v_string, ' ') > 0 loop
15 v_string := replace (v_string, ' ', ' ');
16 end loop;
17 -- fixed 2 lines below:
18 v_string_out := '(%' || replace (v_string, ' ', '% %') || '%) ' || ',';
19 v_string_out := v_string_out || '(' || v_string || ')' || ',';
20 -- first search string with spaces:
21 v_string_in1 := v_string || ' ';
22 -- second search string without spaces:
23 v_string_in2 := replace (v_string_in1, ' ', '') || ' ';
24 if v_string_in2 = v_string_in1 then
25 v_string_in2 := null;
26 end if;
27 -- format search string one token at a time:
28 while v_string_in1 is not null loop
29 v_token := substr (v_string_in1, 1, instr (v_string_in1, ' ') - 1);
30 v_string_out := v_string_out
31 || '('
32 || '?' || v_token || ' or '
33 || '!' || v_token || ' or '
34 || '$' || v_token
35 || '),';
36 v_string_in1 := substr (v_string_in1, instr (v_string_in1, ' ') + 1);
37 end loop;
38 while v_string_in2 is not null loop
39 v_token := substr (v_string_in2, 1, instr (v_string_in2, ' ') - 1);
40 v_string_out := v_string_out
41 || '('
42 || '%' || v_token || '% or '
43 || '?' || v_token || ' or '
44 || '!' || v_token || ' or '
45 || '$' || v_token
46 || '),';
47 v_string_in2 := substr (v_string_in2, instr (v_string_in2, ' ') + 1);
48 end loop;
49 -- return formatted string (added score of 100 for exact match in any column:
50 return
51 '(' || v_string || ') * 10 * 10 or
52 (' || rtrim (v_string_out, ',') || ' within text1) * 10 or
53 (' || rtrim (v_string_out, ',') || ' within nd1) * 5 or
54 (' || rtrim (v_string_out, ',') || ' within text2) * .5 or
55 (' || rtrim (v_string_out, ',') || ' within nd2) * .1';
56 end text_format;
57 /
Function created.
SCOTT@orcl_11gR2> show errors
No errors.
SCOTT@orcl_11gR2> select text_format ('STAPLE CARD') from dual
2 /
TEXT_FORMAT('STAPLECARD')
(STAPLE CARD) * 10 * 10 or
((%STAPLE% %CARD%) ,(STAPLE CARD),(?STAPLE or !STAPLE or $STAPLE),(?CARD or
!CARD or $CARD),(%STAPLECARD% or ?STAPLECARD or !STAPLECARD or $STAPLECARD) wit
hin text1) * 10 or
((%STAPLE% %CARD%) ,(STAPLE CARD),(?STAPLE or !STAPLE or $STAPLE),(?CARD or
!CARD or $CARD),(%STAPLECARD% or ?STAPLECARD or !STAPLECARD or $STAPLECARD) wit
hin nd1) * 5 or
((%STAPLE% %CARD%) ,(STAPLE CARD),(?STAPLE or !STAPLE or $STAPLE),(?CARD or
!CARD or $CARD),(%STAPLECARD% or ?STAPLECARD or !STAPLECARD or $STAPLECARD) wit
hin text2) * .5 or
((%STAPLE% %CARD%) ,(STAPLE CARD),(?STAPLE or !STAPLE or $STAPLE),(?CARD or
!CARD or $CARD),(%STAPLECARD% or ?STAPLECARD or !STAPLECARD or $STAPLECARD) wit
hin nd2) * .1
1 row selected.
SCOTT@orcl_11gR2> column text1 format a11
SCOTT@orcl_11gR2> column text2 format a11
SCOTT@orcl_11gR2> column text3 format a11
SCOTT@orcl_11gR2> SELECT SCORE(1), t.* FROM test_sh t
2 WHERE CONTAINS (text3, text_format ('STAPLE CARD'), 1) > 0
3 ORDER BY 1 DESC
4 /
SCORE(1) TEXT1 TEXT2 TEXT3
100 staple card word2 word3
100 word4 staple card word5
100 staplecard word2 word3
10 word4 staplecard word5
4 rows selected. -
How to make one of the columns in my tabular an text item with popup lov
Hello,
I want to manually make one of the columns say for the deptno in my tabular form as on text item popup lov using apex_item package
and whenever user clicks on the text item popup lov, it should open up an dept table report and from which he/she needs to select
the deptno and this deptno should be returned into the text item popup lov column.
like for example: say if i have an emp table tabular form with all the columns and deptno column as an popup lov and when user clicks on this column
it should open up an new sql report(similar to popup lov window), the select statement for this would be
select deptno,dname,loc from dept order by 1;
And from this popup lov report whenever an user selects a particular deptno, the same deptno should be returned to my text item popup column in emp tabular form.
something like this
select
"EMPNO",
"EMPNO" EMPNO_DISPLAY,
"ENAME",
"JOB",
"MGR",
"HIREDATE",
"SAL",
"COMM",
APEX_ITEM.TEXT(3,deptno,20,50,'readonly=true') || '<img height="16" align="middle" width="16" style="vertical-align: middle;" alt="Popup Lov" src="/i/lov_16x16.gif"/>' deptno
from "#OWNER#"."EMP"
like i made my column as an text item lov and now I want to write an onclick event for the text item lov so that an popup window is displayed which is a sql report of the table dept (select deptno,dname,loc from dept order by 1;) and in this report i want to make deptno as an link so that when ever an user clicks on it
-- this value should be returned to my text item popup lov column deptno in the emp tabular form.
can anyone help me out with this issue.
thanks,Hi,
Refer to the link for the detailed information on ALV Grid.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
Hope it helps.
Regards,
Rajesh Kumar
Edited by: Rajesh Kumar on May 25, 2009 9:13 AM -
Retrieve as many duplicate records as a value stored in one of the columns
Hi,
I have a peculiar requirement where I want multiple copies of rows the count of which is determined by one of the column values:
create table test (id number, value number, data varchar2(100));
insert into test values (1,5,'one');
insert into test values (2,2,'two);
insert into test values (3,3,'three');
insert into test values (4,4,'four');
insert into test values (5,5,'five');
select * from test where id=3;
I get:
id,value,data
3,3,three
I want:
id,value,data
3,3,three_1
3,3,three_2
3,3,three_3
i.e. Althought there is ONLY ONE row for the id=3, but as the column value=3, i want 3 rows from this table (all identical) except the last column to which I append a running sequential number.
How to do that?
Thanks.You have still pipelined function :
SQL> create or replace type TypeTest as object (id number, value number, data varchar2(100));
2 /
Type created.
SQL>
SQL> create or replace type ListTest as table of TypeTest;
2 /
Type created.
SQL>
SQL> create or replace function TblTest(p_id number default null)
2 return ListTest
3 pipelined
4 is
5 begin
6 for x in (select id, value, data from test where id = nvl(p_id,id)) loop
7 for i in 1.. x.value loop
8 pipe row (TypeTest(x.id, x.value, x.data||'_'||to_char(i)));
9 end loop;
10 end loop;
11 return;
12 end;
13 /
Function created.
SQL> show err
No errors.
SQL>
SQL> select * from table(TblTest(3));
ID VALUE DATA
3 3 three_1
3 3 three_2
3 3 three_3
SQL> select * from table(TblTest);
ID VALUE DATA
1 5 one_1
1 5 one_2
1 5 one_3
1 5 one_4
1 5 one_5
2 2 two_1
2 2 two_2
3 3 three_1
3 3 three_2
3 3 three_3
4 4 four_1
4 4 four_2
4 4 four_3
4 4 four_4
5 5 five_1
5 5 five_2
5 5 five_3
5 5 five_4
5 5 five_5
19 rows selected.
SQL> Nicolas. -
Push button in one of the columns of Table Control
Hi,
I have a requirement, where i have to display a push button in one of the columns of table control for long text. When user clicks on the control, a pop up has to be appeared in which user should be able to enter some meaning ful description and save it. please suggest me how to do this requirement.
Best Regards,
Phani Kumar. SHai,
You can drag n drop a button to the required column in the table control and give the required parameters like ok_code , name etc.
You can now place a text field as the heading of the column.
Now when the user clicks the the button in a row, read the corresponding line in which he has clicked.For that u can use
get cursor lines wrk_line.
now u'll get the data in that row using
Read table it_tab into wa_tab index wrk_line.
now u can call the text editor (using FM's READ_TEXT ,EDIT_TEXT and CREATE_TEXT in which the user can enter the meaningful description and save it.
When u save the text entered save it with a key part of the row that was read earlier(keep it as the text name).
So now if u need to get the description which was entered earlier u can easily read the text (using READ_TEXT ).
I hope this will be helpful for u .
Thanks
Neeraj -
How to store data file name in one of the columns of staging table
My requirement is to load data from .dat file to oracle staging table. I have done following steps:
1. Created control file and stored in bin directory.
2. Created data file and stored in bin directory.
3. Registered a concurrent program with execution method as SQL*Loader.
4. Added the concurrent program to request group.
I am passing the file name as a parameter to concurrent program. When I am running the program, the data is getting loaded to the staging table correctly.
Now I want to store the filename (which is passed as a parameter) in one of the columns of staging table. I tried different ways found through Google, but none of them worked. I am using the below control file:
OPTIONS (SKIP = 1)
LOAD DATA
INFILE '&1'
APPEND INTO TABLE XXCISCO_SO_INTF_STG_TB
FIELDS TERMINATED BY ","
OPTIONALLY ENCLOSED BY '"'
TRAILING NULLCOLS
COUNTRY_NAME
,COUNTRY_CODE
,ORDER_CATEGORY
,ORDER_NUMBER
,RECORD_ID "XXCISCO_SO_INTF_STG_TB_S.NEXTVAL"
,FILE_NAME CONSTANT "&1"
,REQUEST_ID "fnd_global.conc_request_id"
,LAST_UPDATED_BY "FND_GLOBAL.USER_ID"
,LAST_UPDATE_DATE SYSDATE
,CREATED_BY "FND_GLOBAL.USER_ID"
,CREATION_DATE SYSDATE
,INTERFACE_STATUS CONSTANT "N"
,RECORD_STATUS CONSTANT "N"
I want to store file name in the column FILE_NAME stated above. I tried with and without constant using "$1", "&1", ":$1", ":&1", &1, $1..... but none of them worked. Please suggest me the solution for this.
Thanks,
AbhayPl post details of OS, database and EBS versions. There is no easy way to achieve this.
Pl see previous threads on this topic
SQL*Loader to insert data file name during load
Sql Loader with new column
HTH
Srini -
Hello, is there any way of having a reboot disk for lion that I'm downloading, like the one I have with snow leopard ?
Once the Lion download is complete quit the installer and follow these directions. The file you need to make a boot disk disappears after you install Lion.
Egg Freckles | Burning A Lion Boot Disc
However, the Lion installation includes a recovery partition. It won't be of help if your entire HD dies but is very handy otherwise. This Knowledge Base article has a lot of good information about Lion's recovery partition.
OS X Lion: About Lion Recovery -
ADO Error: 0x00000001 Argument error. One of the column names specified is blank.
I am writing a database program and have come across this error -
ADO Error: 0x00000001
Argument error. One of the column names specified is blank.
I have tried everything I can think of and have no idea what to try next.
The VI that the error is occuring in (attached written in LV 2011) allows the user to enter in the details of a new user. It then looks up this user to get the ID (primary key) of the user which will be used in another step of the program. The VI writes to the database fine but then comes back with the above error when using the SELECT query. All columns in the database have data in them. Also when i use a differnt VI that just looks up the user/customer it works fine.
I have tried deleting all the code and copying the code from the simpler (look up only) VI but I still get the same error.
I created an indicator for the concatenated text to make sure the query was right and it appears to be fine. So now I am stumped. Any help would be greatly appreciated.
Thanks
Attachments:
AddNewMeasurer.vi 40 KBtripped wrote:
I am writing a database program and have come across this error -
ADO Error: 0x00000001
Argument error. One of the column names specified is blank.
I have tried everything I can think of and have no idea what to try next.
The VI that the error is occuring in (attached written in LV 2011) allows the user to enter in the details of a new user. It then looks up this user to get the ID (primary key) of the user which will be used in another step of the program. The VI writes to the database fine but then comes back with the above error when using the SELECT query. All columns in the database have data in them. Also when i use a differnt VI that just looks up the user/customer it works fine.
I have tried deleting all the code and copying the code from the simpler (look up only) VI but I still get the same error.
I created an indicator for the concatenated text to make sure the query was right and it appears to be fine. So now I am stumped. Any help would be greatly appreciated.
Thanks
The query "appears" fine. Well, obviously it isnt' fine. The database is telling you that.
What is the SELECT query you are sending? -
I need help in resolving a problem that prevents me from accessing the iTunes store. Message reads " iTunes cannot contact the iTunes store" and also says that my laptop is no longer authorized to access my account. Help!
Go up to the top of your screen on iTunes and click on 'Store'. Then go down to 'Authorize This Computer'. That should cover part of it unless you've already authorized a bunch of other computers to use your account. If that's the case, you'll have to go to one of those computers and click the button just below it to 'deauthorize your account' from that computer. If you're not able to access the store, check your internet connection to make sure you are connected. Hope this helps.. good luck!
-
Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not complet. the ipod will not do anything at all... please help me i havent got extra money to spend..
Just what happens when the restore does not complete?
Error message?
Does it freeze? Is so what is listed in the status bar of iTunes? -
Report Painter not showing totals for some cells
Hi,
We're developing a report painter that will give us a total of all the columns. This total uses a set of variables and a set which essentially is a grouping of the profit centers. The problem is it is not showing any value on the cell. Despite the individual accounts having some values.
Any ideas where could this gone wrong ? the set exist with the correct accounts.
I.e.
A1 A2 TOTAL (A1 + A2 - defined in set)
Depreciation 100 100 200 [ but this shows blank]how did you solve this problem,my financial statement is not reflecting total posted depreciation even though it is reflecting the depreciation in the indididual G/L accounts.
Maybe you are looking for
-
Is it possible to replace XSLT mapping in place of Graphical mapping
Is it possible to do XSLT mapping in place of Graphical mapping, in any normal scenario? Means the fuctionality we do by using Graphical mapping(like the operations by using node functions etc...) could possible to do with XSLT Mapping?
-
I am new to the parallax scrolling so if this sounds like a stupid question or that I am thinking of this wrong please forgive. Ok say I have a box that comes in and stops at a point as I scroll down but at another point further down the page I want
-
Bookmarks not syncing on iPad after iOS 4.3 update
I have the following problem since the iOS 4.3 update on 2 iPads and 1 iPhone 3GS. (no problem on iPhones 4) If I attach device to iTunes and start syncing, everything seems synced except the bookmarks. I get either messages: 'iTunes could not sync b
-
I believe it is running an older version of maverick it is 10.6.8 but it will not let me update any further . I added 3gb of ram to upgrade from the original 2gb it came with but still no updates are being allowed Does anyone have any idea why this i
-
Upgradation Changes in HR Module
Hii Experts, For our Company, we are upgrading SAP from 4.7 to ECC 6.0. Being on the functional side i just want to know that what will be the changes or the impact of the upgradation on the HR Module including Personnel Administration, Payroll, Time