OAF PO Page Entry - User enter value in particular field - Then want to check it should be unique othewise Message

OAF PO Page Entry - User enter value in particular field - Then want to check it should be unique othewise Message must be displayed so that user will select the non unique value in the entry filed. Please let me know will it be possible using personalization? Or I have to customize the controller extend it?

Hahaha..
Every tools have its own pros and cons.. There are much more things which you do in OAF (which is a web based solution) which you can't even imagine in Forms
Cheers
AJ

Similar Messages

Ensuring user enter value in the fields before proceeding to another fields

Hello,
I am using Oracle APEX 4.1 in oracle 11g R2 database.
Here is the case, I have build a custom form in which there are 20 fields. I want to ensure that end user enters value in sequence one by one.
For example:-
First Name should be entered before Last name or Date of birth.
Please help guys...

Use dynamic actions for that and disable the element Last Name if the element First Name is empty. Enable it if the First Name is entered.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
http://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

How to Get User entered value in a text variable

Hi,
I have made a text variable to show the user entered value in the column header.
The user enteres value in a formula variable ABC whose default value is say '30'.
I am using customer exit to capture this value in the text variable. The code is as follows
IF i_vnam EQ 'txtvar'.
if i_step = 2.
LOOP AT i_t_var_range INTO loc_var_range
WHERE vnam = 'ABC'.
CLEAR l_s_range.
l_s_range-low = loc_var_range-low.
l_s_range-opt = 'EQ'.
l_s_range-sign = 'I'.
APPEND l_s_range TO e_t_range.
EXIT.
ENDLOOP.
endif.
endif.
Now when I am executing the query I am getting the default value in the column header i,e, 30. But when the user changes this default value to something else while executing the query, I simply get blank in the column. The changed value is not getting captured in the text variable.
Thanks

Hi,
Insted of going for exit,
just create a Text variable proceesing typr Default/ Manual Entry and set the default value as u wish,
use it in the KF header; dont use the same Text Variable for Query Title.
Now i tried this for you and it is working fine.
Regards
ReddY A

User entered values are lost on EO validation.

Hi ,
Subject : user entered values are lost on EO validation.
WE have an EO which has 4 attributes all are not null (mandatory)
There is a VO based on this EO
We have added 4 more attributes using a join in EO query using expert mode.
On the page there is a Table , that has 8 columns all mapped to these 8 attributes.
The First column is an LOv that populates 4 column attributes(2 EO based and 2 added thru expert mode)
When the user submits the page, without entering rest of the two EO mandatory atributes, the EO validation is raised and the 4 fields populated by LOv are cleared.
Can you pls tell me what am i doing wrong.
thanks
Chaitanya

Observation
All the table columns that were loosing information were "MessageStyledText" and those not loosing were "MessageTextInput"
Various approaches
SO we converted the MessageStyledText columns into MessageTextInput and the data was retaining properly.
But we wanted these columns are 'ReadOnly' so when we made these columns are MessageTextInput - ReadOnly, then data was not getting popluated by the lov in these.
Working solution - The FormValue 'Glue'
We created formValues correcponding columns and populated the FVs also along with the column (both FV and column have same ViewAtt and View instance) and found that in this case the formvalues 'Glues' the VO att value with the page and does not get lost on refresh.
Strange solution but works, thought to share with all.
thanks
Chaitanya

Reg: User Entered Value in LOV Window

Hi All,
Following is the use case.
I have an LOV ("PO Number") with its own controller. If user enters a partial value in LOV Field, (say 513),
LOV Window comes up with results like PO Number starting with 513. Suppose, If user modifies the search value from 513 to 913,
LOV query needs to get executed with new search value (913).
Can you please suggest me to capture the new user entered value (913) in the controller.
I tried the following. But, poNum value obtained through below code is 513(old value - value entered in LOV of base page.)
Dictionary passiveCriteria = (Dictionary)pageContext.getLovCriteriaItems();
String poNum = (String)passiveCriteria.get("PosPoNumberInternalLov1");
Is there any other way, i can find out the new user entered value in LOV Window.
Thanks,
Kiran.

Hi Gyan,
My requirement is that, I need to make some processing/manipulation on the user entered search value for the LOV.
If the user enters value in base page, i am able to get the value and process it.
But, If user clicks on LOV Window, enters a new value in search field, i am not able to capture the new value.
Please suggest accordingly.
Thanks,
Kiran

How to clear the data in my page after user enter submit button

hi......
how to clear the data's in my page after user enter submit button. Actually while pressing first time itself the data is uploaded in database.

Hi Nazeer,
Instead of doing it on the same button better create a separate button for this functionality, As per my understanding you want to clear these fields to create new record so that you can enter a new record so for this you just need to insert a new row in VO.
Still if you want to do it on the same button then you need to put the check that particular record is not dirty if it is not then create new record else create new record.
One more thing if you will clear on the second click of a button how will you update your record??
Regards,
Reetesh Sharma

How to find the user entered value is Integer or not?

hi,
i want to find, whether the user entered value is Integer or not. If it is Integer, i wanna continue the program. otherwise send an error message. i tried to find for function in API. But i couldn't. can somebody help me with sample code. very urgent.

Do a Integer.parseInt(<string value>) in a try catch block If a NumberFormatException is thrown, the entered number is not an integer.

How to get the User entered value in the Submit request form for a parameter of a concurrent program in Oracle applications.

Hi All,
I have a requirement where i need to get the user entered value in the Parameter of a concurrent program while submitting it. i tried to query the FND_CONCURRENT_REQUESTS table but in that it stores the ID values from the value set of the Parameter.
After submitting the Concurrent request when we click on the view Details button it opens a form where it displays the arguments in the parameter field . i want to get that string.
Thanks a lot in advance for your time and help.
- Vijay

Hi All,
I have a requirement where i need to get the user entered value in the Parameter of a concurrent program while submitting it. i tried to query the FND_CONCURRENT_REQUESTS table but in that it stores the ID values from the value set of the Parameter.
After submitting the Concurrent request when we click on the view Details button it opens a form where it displays the arguments in the parameter field . i want to get that string.
Thanks a lot in advance for your time and help.
- Vijay

RRI with passing user enter values

Hi Friends !
Brief about my requirement for the RRI.
I have a Main Query. When I click on Goto option, it shud display the variable screen and pass the user entered values in the Jump Query.
In RSBBS, I tried with the "Assignment Detail" button, in which we have variable option, etc but via Assignment Details, its not working.
Please provide some inputs.
Thanks.
Rekha

It sounds like you are trying to make RRI do something that it is not designed to do. For RRI to work correctly, the sender query must contain all of the values to be passed to the receiver query. Therefore, no prompting for additional variable values occurs during the jump from the sender to the receiver.
To quote the SAP Help on RRI :
"Queries, transactions, reports and Web addresses can be jump targets. The parameterization of the target action is taken from the context of the cell that you have jumped from. You can set parameters for calling a BEx Query or a BEx Web Application using input variables which are filled from the selection conditions and the element definitions of the cells highlighted in the sender query."
See <a href="http://help.sap.com/saphelp_nw04/helpdata/en/99/08629bd3e41d418530c6849df303c9/content.htm">SAP Library - Report-Report Interface</a> for all the details.
Hope this helps...
Bob

How to restrict user to must enter value in compulsory fields

Greetings !
I had a personal information form. I want to restrict user to enter values in all fields e.g Compulsory fields (Username, D.O.B etc)
how i restrict user to must enter value in Compulsory fields

I created an example on apex.oracle.com
http://apex.oracle.com/pls/apex/f?p=18686:1:0:::::
like you see a red staric placed on ID it means it is complusory to enter because it is a primary key, i want this on every field or to restrict user to enter all data , if any field left blank it will give error "to Fill respective field ", but not on creation but on left blank (if user type ID e.g 12 and skip ename field and go on Job field it gives error to fill Ename first)

How to enter values in the fields of standard SAP Infotype e.g. IT0024

Hi,
How to enter values in the fields of standard SAP Infotype?
e.g. I want to enter values in infotype IT0024(Qualifications) in the field AUSPR(Profincy):-
1-Level 1
2-Level 2
3-Level 3
4-Level 4
5-Level 5
Thanks,
Ameet

Hi Divya,
I checked with the screen and report which is mentioned by you. But I want to modify/make changes that should appear in the screen when you view details for a particualar employee in Qualifications(IT0024).
Please refer the screen 2000 of module pool MP002400 in SE80. In that screen I want to make change as listbox with key.
Can it be achieved in the same way as mentioned by you before by making standard SAP report as Z and then modify using layout editor?
Please help me out. I think I am almost there.
Thanks,
Ameet

How to display texts automatic. besides entered value for a field in Trans.

How to display texts automatically besides the entered value for a field in a standard transaction screen. For example you have a value table and a text table associated to it. Then on entering the value field and pressing enter the text associated should get displayed immediately besides the value. Like if you have 'LOC' as the value and 'Location' as the text associated to it, on entering this value 'LOC', you automatically get the text 'Location' printed besides it automatically in a transaction screen ?
Message was edited by: Sarika Kedia

Hi sarika,
Welcome to SDN.
1. first of all, such display of text,
   is not automatic.
   (it appears to be automatic)
2. At design time,
   a) take one extra field for text
     and mark it as OUTPUT ONLY
3. Then in PBO coding,
    call some module, and in that module
    write code
4. The code should be to
   select from TEXT Table
   into the work area.
EG. THE SCREEN TEXT FIELD NAME IS
T510A-FIELDNAME.
CLEAR t510a.
SELECT SINGLE * FROM t510a INTO t510a
WHERE trfar = FIELVALUE.
5. This will take care of
   displaying the text value of that field.
regards,
amit m.

If I have a 4 decimal values in a field, then I want 2 only on the output.

Hi,
If I have a 4 decimal values in a field, then I want 2 only on the output of the smartform. what I have to do. Also I have to condense the value of that.
Thanks,
BSV

Hi,
Define one packed number with 2 decimals and move the four decimals number to decimal 2 variable.
Ex:
Data:P(13) type P decimals 2,
t(13) type P decimals 4.
P = T.
write P.
Thanks ,CSR.
****Please reward if helpful.

How to keep user enter value in textbox even if JSP page get refreshed.

Hi Experts,
In My JSP Page i have one text(customer Name) and number of checkboxes and radio buttons.
My Problem is:
if user enter some value in Text Box and after that user clicks on some radio button becouse of some action on radio button page get refresh and also the value enter by user in text box get vanish.
I want keep text box value as it is even if page get refreshed becouse of some action.
Is it any setting in Strust framework for this.
I am using Struts Framework.
Please let me know if need more information

Sorry, I don't clearly understand the question and the horrible code (Java code doesn't belong in JSPs) doesn't make it more easy to understand.
Best what I can guess is that you need to learn about passing request parameters/attributes in JSP and the possibilty of storing attributes in the session. And based on the code, also learn how to separate the data, business and presentation layers properly.

Need help to get the user entered value from a input field in Table in OA

I have a table in my OA page.
Here one column is there which should take in put from user.
i.e an item quantity field text input is there which should take the updated value when the add to cart link which is next column in the table. On clicking of the link I am trying to get the updated value entered by user. for the respected row for which addto cart link get clicked.
For that link I have defined some parameter through SPEL,( like this parameter name: item_quantity value : ${oa.MisibeItemSearchVO.ItemQuantity} ) which has fireaction. But when i am clicking the addto cart link I am not getting the current value entered by the user.
Can any body guide me how to get that related value for which the add to cart link got clicked.
for this when i am doing pageContext.getParameter("item_quantity"));
I am not getting the value entered by user.
please suggest me
Thanks!
Smarajeet

The below is my Vo query for item quanity i am using a dummy query "(select null from dual) as ITEM_QUANTITY"
in the below query and item type is number. and this is a messageTextINput in OA page and is maped to ItemQuantity vo attribute.
SELECT idsi.section_item_id
,idsi.inventory_item_id
,(select concatenated_segments from mtl_system_items_kfv mstk
where mstk.inventory_item_id = idsi.inventory_item_id
and mstk.organization_id =idsi.organization_id) ITEM_NAME
,(select description from mtl_system_items_tl mtll
where mtll.inventory_item_id = idsi.inventory_item_id
and mtll.organization_id =idsi.organization_id
and language = USERENV('LANG') ) ITEM_Description
,(SELECT CASE
WHEN instr(msib.segment6,'NAMED USER') > 0 THEN 'NAMED_USER'
WHEN instr(msib.segment6,'PROCESSOR')>0 THEN 'PROCESSOR'
ELSE msib.segment6
END
FROM MTL_SYSTEM_ITEMS_B msib
WHERE msib.INVENTORY_ITEM_ID = idsi.inventory_item_id
AND msib.ORGANIZATION_ID = idsi.organization_id) LICENSE_TYPE
,(SELECT CASE
WHEN instr(msib.segment6,'1 YR') > 0 THEN '1YR'
WHEN instr(msib.segment6,'2 YR') > 0 THEN '2YR'
WHEN instr(msib.segment6,'3 YR') > 0 THEN '3YR'
WHEN instr(msib.segment6,'4 YR') > 0 THEN '4YR'
WHEN instr(msib.segment6,'5 YR') > 0 THEN '5YR'
WHEN instr(msib.DESCRIPTION,'Perpetual') > 0 THEN 'PERPETUAL'
END TERM FROM MTL_SYSTEM_ITEMS_B msib
WHERE msib.INVENTORY_ITEM_ID = idsi.inventory_item_id
AND msib.ORGANIZATION_ID = idsi.organization_id) TERM
,(select qll.operand
FROM qp_list_lines qll
,qp_pricing_attributes qpa
WHERE qll.list_line_id = qpa.list_line_id
AND qpa.product_attr_value = to_char(idsi.inventory_item_id)
AND qll.list_header_id = 439381
AND sysdate between NVL(qll.start_date_active, sysdate) and NVL(qll.end_date_active, sysdate+1)
AND qpa.list_header_id = qll.list_header_id
AND qpa.product_attribute = 'PRICING_ATTRIBUTE1'
AND qpa.product_attribute_context = 'ITEM'
AND NVL(qpa.pricing_attribute_context,'MIXED') = 'MIXED') ITEM_PRICE
,(select null from dual) as ITEM_QUANTITY
,(select currency_code from qp_list_headers_b where list_header_id =439381) currency_code
,(select segment1 from mtl_system_items_b msib
where msib.inventory_item_id = idsi.inventory_item_id
and msib.organization_id =idsi.organization_id) PART_NUMBER
FROM ibe_dsp_section_items idsi
,ibe_dsp_msite_sct_items idmsi
,( select distinct child_section_id
from IBE_DSP_MSITE_SCT_SECTS b
connect by PRIOR child_section_id = parent_section_id
start with parent_section_id =:1
and mini_site_id =1
UNION
select distinct child_section_id
from IBE_DSP_MSITE_SCT_SECTS b
where child_section_id =:1
and mini_site_id =1
) csi
WHERE idsi.organization_id = 101
AND idmsi.section_item_id = idsi.section_item_id
AND idsi.section_id = csi.child_section_id
AND idmsi.mini_site_id = 14409

OAF PO Page Entry - User enter value in particular field - Then want to check it should be unique othewise Message

Similar Messages

Maybe you are looking for