OAM (10.1.4.3) Integration with WebLogic App Server (10.3.0 or below)
Hi All,
Can I use OAM 10.1.4.3 (Authentication Provider & Identity Asserter) to implement SSO with weblogic App Server 10.3.0 or below?
OAM 10.1.4.3 Authentication Provider & Identity Asserter is the recommended way to configure SSO with Web Logic App server 10.3.1 ( Oracle Middleware 11g).
And
OAM 10.1.4.2 uses WebLogic SSPI to configure SSO between OAM 10g and WebLogic App Server 10.3.0 or below.
Hi,
This is how the integration goes with different versions of WLS and OAM.
There is oamAuthnProvider.jar available with OAM 10.1.4.3 downloads. So it provides the assertion functionality.
Can I use OAM 10.1.4.3 (Authentication Provider & Identity Asserter) to implement SSO with weblogic App Server 10.3.0 or below?
Mahendra: Yes
OAM 10.1.4.3 Authentication Provider & Identity Asserter is the recommended way to configure SSO with Web Logic App server 10.3.1 ( Oracle Middleware 11g).
Mahendra: Yes, this is the recommended and easy approach.
OAM 10.1.4.2 uses WebLogic SSPI to configure SSO between OAM 10g and WebLogic App Server 10.3.0 or below.
Mahendra: Yes, older version of OAM uses SSPI connector installation.
HTH.
Mahendra.
Similar Messages
-
Using ThreadLocal with WebLogic App Server
With weblogic thread pooling, When I use threadlocal variables in my application,
how does it work as far as cleaning those variables after the request is completed.
Thanks in advance.
Hi.
Hmm, since WLS execute threads never die, I don't know that your threadlocal variables
will get cleaned up or gc'd until the server is shutdown.
Regards,
Michael
Kumar Ampani wrote:
> With weblogic thread pooling, When I use threadlocal variables in my application,
> how does it work as far as cleaning those variables after the request is completed.
>
> Thanks in advance.
Michael Young
Developer Relations Engineer
BEA Support
-
WebLogic App server - IHS web server
Will the same "Apache HTTP Server Plug-In" allow IBM/IHS web server to work with WebLogic App server? If so which versions are supported?
Hello I'm trying to install the plugin in IHS 2.0X as per the instructions:
copy mod_wl_20.so file to modules directory,
made a following entry in httpd.conf:
LoadModule weblogic_module modules/mod_wl_20.so
verified that httpd.conf is ok..but IHS coredumps upon startup. Any ideas please? Appreciate your help! Thanks!
This is on Solaris 8 -
Iplanet Integration with weblogic
Dear All,
We want to integrate IPlanet with weblogic application server.
Please suggest the procedure for the same i.e docs , URLs.
Thanks
Prashantkindly take a look at our reverse proxy plugin
http://docs.sun.com/app/docs/doc/819-0902
also, please note that if you need to serve only servlet / jsp , then sun java system web server 6.1 has integrated container that can do the job very well.
for any further business process logic , you can use the app servers with 'reverse proxy enabled' so that these requested can be forwards to either Sun Java System Application Server or Web Logic
thanks
sriram. -
Weblogic app server wsdl web service call with SSL Validation error = 16
Weblogic app server wsdl web service call with SSL Validation error = 16
I need to make wsdl web service call in my weblogic app server. The web service is provided by a 3rd party vendor. I keep getting error
Cannot complete the certificate chain: No trusted cert found
Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure
Validation error = 16
From the SSL debug log, I can see 3 verisign hierarchy certs are correctly loaded (see 3 lines in the log message starting with “adding as trusted cert”). But somehow after first handshake, I got error “Cannot complete the certificate chain: No trusted cert found”.
Here is how I load trustStore and keyStore in my java program:
System.setProperty("javax.net.ssl.trustStore",”cacerts”);
System.setProperty("javax.net.ssl.trustStorePassword", trustKeyPasswd);
System.setProperty("javax.net.ssl.trustStoreType","JKS");
System.setProperty("javax.net.ssl.keyStoreType","JKS");
System.setProperty("javax.net.ssl.keyStore", keyStoreName);
System.setProperty("javax.net.ssl.keyStorePassword",clientCertPwd); System.setProperty("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump","true");
Here is how I create cacerts using verisign hierarchy certs (in this order)
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignClass3G5PCA3Root.txt -alias "Verisign Class3 G5P CA3 Root"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediatePrimary.txt -alias "Verisign C3 G5 Intermediate Primary"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediateSecondary.txt -alias "Verisign C3 G5 Intermediate Secondary"
Because my program is a weblogic app server, when I start the program, I have java command line options set as:
-Dweblogic.security.SSL.trustedCAKeyStore=SSLTrust.jks
-Dweblogic.security.SSL.ignoreHostnameVerification=true
-Dweblogic.security.SSL.enforceConstraints=strong
That SSLTrust.jks is the trust certificate from our web server which sits on a different box. In our config.xml file, we also refer to the SSLTrust.jks file when we bring up the weblogic app server.
In addition, we have working logic to use some other wsdl web services from the same vendor on the same SOAP server. In the working web service call flows, we use clientgen to create client stub, and use SSLContext and WLSSLAdapter to load trustStore and keyStore, and then bind the SSLContext and WLSSLAdapter objects to the webSerive client object and make the webservie call. For the new wsdl file, I am told to use wsimport to create client stub. In the client code created, I don’t see any way that I can bind SSLContext and WLSSLAdapter objects to the client object, so I have to load certs by settting system pramaters. Here I attached the the wsdl file.
I have read many articles. It seems as long as I can install the verisign certs correctly to web logic server, I should have fixed the problem. Now the questions are:
1. Do I create “cacerts” the correct order with right keeltool options?
2. Since command line option “-Dweblogic.security.SSL.trustedCAKeyStore” is used for web server jks certificate, will that cause any problem for me?
3. Is it possible to use wsimport to generate client stub that I can bind SSLContext and WLSSLAdapter objects to it?
4. Do I need to put the “cacerts” to some specific weblogic directory?
---------------------------------wsdl file
<wsdl:definitions name="TokenServices" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:tns="http://tempuri.org/" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsap="http://schemas.xmlsoap.org/ws/2004/08/addressing/policy" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:msc="http://schemas.microsoft.com/ws/2005/12/wsdl/contract" xmlns:wsa10="http://www.w3.org/2005/08/addressing" xmlns:wsx="http://schemas.xmlsoap.org/ws/2004/09/mex" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata">
<wsp:Policy wsu:Id="TokenServices_policy">
<wsp:ExactlyOne>
<wsp:All>
<sp:TransportBinding xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
<wsp:Policy>
<sp:TransportToken>
<wsp:Policy>
<sp:HttpsToken RequireClientCertificate="true"/>
</wsp:Policy>
</sp:TransportToken>
<sp:AlgorithmSuite>
<wsp:Policy>
<sp:Basic256/>
</wsp:Policy>
</sp:AlgorithmSuite>
<sp:Layout>
<wsp:Policy>
<sp:Strict/>
</wsp:Policy>
</sp:Layout>
</wsp:Policy>
</sp:TransportBinding>
<wsaw:UsingAddressing/>
</wsp:All>
</wsp:ExactlyOne>
</wsp:Policy>
<wsdl:types>
<xsd:schema targetNamespace="http://tempuri.org/Imports">
<xsd:import schemaLocation="xsd0.xsd" namespace="http://tempuri.org/"/>
<xsd:import schemaLocation="xsd1.xsd" namespace="http://schemas.microsoft.com/2003/10/Serialization/"/>
</xsd:schema>
</wsdl:types>
<wsdl:message name="ITokenServices_GetUserToken_InputMessage">
<wsdl:part name="parameters" element="tns:GetUserToken"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetUserToken_OutputMessage">
<wsdl:part name="parameters" element="tns:GetUserTokenResponse"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetSSOUserToken_InputMessage">
<wsdl:part name="parameters" element="tns:GetSSOUserToken"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetSSOUserToken_OutputMessage">
<wsdl:part name="parameters" element="tns:GetSSOUserTokenResponse"/>
</wsdl:message>
<wsdl:portType name="ITokenServices">
<wsdl:operation name="GetUserToken">
<wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetUserToken" message="tns:ITokenServices_GetUserToken_InputMessage"/>
<wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetUserTokenResponse" message="tns:ITokenServices_GetUserToken_OutputMessage"/>
</wsdl:operation>
<wsdl:operation name="GetSSOUserToken">
<wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserToken" message="tns:ITokenServices_GetSSOUserToken_InputMessage"/>
<wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserTokenResponse" message="tns:ITokenServices_GetSSOUserToken_OutputMessage"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="TokenServices" type="tns:ITokenServices">
<wsp:PolicyReference URI="#TokenServices_policy"/>
<soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="GetUserToken">
<soap12:operation soapAction="http://tempuri.org/ITokenServices/GetUserToken" style="document"/>
<wsdl:input>
<soap12:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="GetSSOUserToken">
<soap12:operation soapAction="http://tempuri.org/ITokenServices/GetSSOUserToken" style="document"/>
<wsdl:input>
<soap12:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="TokenServices">
<wsdl:port name="TokenServices" binding="tns:TokenServices">
<soap12:address location="https://ws-eq.demo.i-deal.com/PhxEquity/TokenServices.svc"/>
<wsa10:EndpointReference>
<wsa10:Address>https://ws-eq.demo.xxx.com/PhxEquity/TokenServices.svc</wsa10:Address>
</wsa10:EndpointReference>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
----------------------------------application log
adding as trusted cert:
Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x641be820ce020813f32d4d2d95d67e67
Valid from Sun Feb 07 19:00:00 EST 2010 until Fri Feb 07 18:59:59 EST 2020
adding as trusted cert:
Subject: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x3c9131cb1ff6d01b0e9ab8d044bf12be
Valid from Sun Jan 28 19:00:00 EST 1996 until Wed Aug 02 19:59:59 EDT 2028
adding as trusted cert:
Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x250ce8e030612e9f2b89f7054d7cf8fd
Valid from Tue Nov 07 19:00:00 EST 2006 until Sun Nov 07 18:59:59 EST 2021
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Cipher: SunPKCS11-Solaris version 1.6 for algorithm DESede/CBC/NoPadding>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Cipher for algorithm DESede>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSetup: loading trusted CA certificates>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 28395435>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
at javax.xml.ws.Service.<init>(Service.java:56)
at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 22803607>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 14640403>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - 12.29.210.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
at javax.xml.ws.Service.<init>(Service.java:56)
at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 16189141>I received a workaround by an internal message.
The how to guide is :
-Download the wsdl file (with bindings, not the one from ESR)
-Correct it in order that the schema corresponds to the answer (remove minOccurs or other things like this)
-Deploy the wsdl file on you a server (java web project for exemple). you can deploy on your local
-Create a new logicial destination that point to the wsdl file modified
-Change the metadata destination in your web dynpro project for the corresponding model and keep the execution desitnation as before.
Then the received data is check by the metadata logical destination but the data is retrieved from the correct server. -
Integrating iPlanet Web Server 6.0 with SunOne App Server 7.0
I am experiencing problems integrating iPlanet Web Server 6.0 with SunOne App Server 7.0
My magnus.conf is
#ServerRoot /usr/iplanet/servers/https-test
ServerID https-test
ServerName sulev016.eur.gep.ge.com
ErrorLog /usr/iplanet/servers/https-test/logs/errors
PidLog /usr/iplanet/servers/https-test/logs/pid
User root
MtaHost localhost
DNS off
Security off
ClientLanguage en
AdminLanguage en
DefaultLanguage en
RqThrottle 128
StackSize 131072
CGIWaitPid on
TempDir /tmp/https-test-ab0d7966
Init fn=flex-init access="$accesslog" format.access="%Ses->client.ip% - %Req->vars.auth-user% [%SYSDATE%] \"%Req->reqpb.clf-request%\" %Req->srvhdrs.clf-status% %Req->srvhdrs.content-length%"
Init fn=load-types mime-types=mime.types
Init fn="load-modules" shlib="/usr/iplanet/servers/bin/https/lib/libNSServletPlugin.so" funcs="NSServletEarlyInit,NSServletLateInit,NSServletNameTrans,NSServletService" shlib_flags="(global|now)"
Init fn="NSServletEarlyInit" EarlyInit=yes
Init fn="NSServletLateInit" LateInit=yes
Init fn="load-modules" shlib="/usr/iplanet/servers/plugins/passthrough/bin/libpassthrough.so" funcs="init-passthrough,auth-passthrough,check-passthrough,service-passthrough" NativeThread="no"
Init fn="init-passthrough"
==========================================
my obj.conf is
<Object name=default>
NameTrans fn="assign-name" from="(/OMS|/OMS/*)" name="passthrough"
NameTrans fn="NSServletNameTrans" name="servlet"
NameTrans fn="pfx2dir" from="/servlet" dir="/usr/iplanet/servers/docs/servlet" name="ServletByExt"
NameTrans fn=pfx2dir from=/mc-icons dir="/usr/iplanet/servers/ns-icons" name="es-internal"
NameTrans fn="pfx2dir" from="/manual" dir="/usr/iplanet/servers/manual/https" name="es-internal"
NameTrans fn=document-root root="$docroot"
PathCheck fn=unix-uri-clean
PathCheck fn="check-acl" acl="default"
PathCheck fn=find-pathinfo
PathCheck fn=find-index index-names="index.html,home.html"
ObjectType fn=type-by-extension
ObjectType fn=force-type type=text/plain
Service type="magnus-internal/jsp" fn="NSServletService"
Service method=(GET|HEAD) type=magnus-internal/imagemap fn=imagemap
Service method=(GET|HEAD) type=magnus-internal/directory fn=index-common
Service method=(GET|HEAD) type=*~magnus-internal/* fn=send-file
AddLog fn=flex-log name="access"
</Object>
<Object name=cgi>
ObjectType fn=force-type type=magnus-internal/cgi
Service fn=send-cgi user="$user" group="$group" chroot="$chroot" dir="$dir" nice="$nice"
</Object>
<Object name="servlet">
ObjectType fn=force-type type=text/html
Service fn="NSServletService"
</Object>
<Object name="jsp092">
ObjectType fn="type-by-extension"
ObjectType fn="change-type" type="magnus-internal/jsp092" if-type="magnus-internal/jsp"
Service fn="NSServletService" type="magnus-internal/jsp092"
</Object>
<Object name="ServletByExt">
ObjectType fn=force-type type=magnus-internal/servlet
Service type="magnus-internal/servlet" fn="NSServletService"
</Object>
<Object name="es-internal">
PathCheck fn="check-acl" acl="es-internal"
</Object>
<Object name="passthrough">
ObjectType fn="force-type" type="magnus-internal/passthrough" Service type="magnus-internal/passthrough" fn="service-passthrough" servers="http://3.224.68.131:81"
Error reason="Bad Gateway" fn="send-error" uri="$docroot/badgateway.html"
</Object>
The requests are not passing through to the app server when i try to access it through port 80.
Presently I am testing my appln over port 81 on the app server.
Thanks and Regards
Vineet GulianiEach ObjectType and Service directive should begin on a new line. You appear to have placed two directives on a single line.
-
Groupware integration with microsoft exchange server
I have a query regarding Groupware integration with microsoft exchange server.whether we require IIS server and microsoft exchange server on the same machine for groupware integration.or they can be on different machines.
thanks,
Pramodhi,
We actually implemented integration of SAP with microsoft exchange server. It is not necessary for server and IIS to be in the same machine.
regards,
Ganesh.N -
Hi,
I am using servlets in Weblogic Server environemt. My client (browser based) switches
from HTTPS to HTTP and vice versa while accessing different servlets.
In IE application works fine but when using Netscape it fails in many parts .
I have read that there is a fix for Netscape , it goes like this
" Question : When a Netscape browser starts a session with WebLogic Server on an
HTTP page and then moves to an HTTPS page, a new session is created. How can I preserve
the session while switching to or from HTTPS?
Answer : The cookie WebLogic Server sends includes the port number. When the Netscape
browser sees a cookie with a different port number, it assumes the destination is
a different server, so it does not return the cookie to WebLogic Server. The way
to prevent this is to specify the domain name that WebLogic Server writes in the
cookie with the weblogic.httpd.session.cookie.domain property. For example:
weblogic.httpd.session.cookie.domain=.mydomain.com "
I have tried this also by giving different versions of the above mentioned line in
weblogic.properties file
i) weblogic.httpd.session.cookie.domain=.myServerName
where myServerName is name of the machine in which Weblogic App server is runningWhich ports are you using for HTTP and HTTPS?
Robert Patrick wrote:
Is the browser talking directly to WLS or going through another web server (and the
weblogic plug-in)? In the URLs being used from the browser, do you always uss the full
machine name (e.g., mymachine.mydomain.com) or are you trying to use just the hostname
(e.g., mymachine) or the IP address?
Robert
Ajay Singh wrote:
Hi,
I am using servlets in Weblogic Server environemt. My client (browser based) switches
from HTTPS to HTTP and vice versa while accessing different servlets.
In IE application works fine but when using Netscape it fails in many parts .
I have read that there is a fix for Netscape , it goes like this
" Question : When a Netscape browser starts a session with WebLogic Server on an
HTTP page and then moves to an HTTPS page, a new session is created. How can I preserve
the session while switching to or from HTTPS?
Answer : The cookie WebLogic Server sends includes the port number. When the Netscape
browser sees a cookie with a different port number, it assumes the destination is
a different server, so it does not return the cookie to WebLogic Server. The way
to prevent this is to specify the domain name that WebLogic Server writes in the
cookie with the weblogic.httpd.session.cookie.domain property. For example:
weblogic.httpd.session.cookie.domain=.mydomain.com "
I have tried this also by giving different versions of the above mentioned line in
weblogic.properties file
i) weblogic.httpd.session.cookie.domain=.myServerName
where myServerName is name of the machine in which Weblogic App server is running -
HTTPS to HTTP switching in weblogic App server
Hi,
I am using servlets in Weblogic Server environemt. My client (browser based) switches
from HTTPS to HTTP and vice versa while accessing different servlets.
In IE application works fine but when using Netscape it fails in many parts .
I have read that there is a fix for Netscape , it goes like this
" Question : When a Netscape browser starts a session with WebLogic Server on an
HTTP page and then moves to an HTTPS page, a new session is created. How can I preserve
the session while switching to or from HTTPS?
Answer : The cookie WebLogic Server sends includes the port number. When the Netscape
browser sees a cookie with a different port number, it assumes the destination is
a different server, so it does not return the cookie to WebLogic Server. The way
to prevent this is to specify the domain name that WebLogic Server writes in the
cookie with the weblogic.httpd.session.cookie.domain property. For example:
weblogic.httpd.session.cookie.domain=.mydomain.com "
I have tried this also by giving different versions of the above mentioned line in
weblogic.properties file
i) weblogic.httpd.session.cookie.domain=.myServerName
where myServerName is name of the machine in which Weblogic App server is runningtry
weblogic.httpd.session.cookie.domain=.myDomainName
where myDomainName is something like india.techspan.com, make sure you don't put
in the name of your machine. WLS doesn't care about that in this property.
"Ajay Singh" <[email protected]> wrote:
>
Hi,
I am using servlets in Weblogic Server environemt. My client (browser
based) switches
from HTTPS to HTTP and vice versa while accessing different servlets.
In IE application works fine but when using Netscape it fails in many parts
I have read that there is a fix for Netscape , it goes like this
" Question : When a Netscape browser starts a session with WebLogic Server
on an
HTTP page and then moves to an HTTPS page, a new session is created. How
can I preserve
the session while switching to or from HTTPS?
Answer : The cookie WebLogic Server sends includes the port number. When
the Netscape
browser sees a cookie with a different port number, it assumes the destination
is
a different server, so it does not return the cookie to WebLogic Server.
The way
to prevent this is to specify the domain name that WebLogic Server writes
in the
cookie with the weblogic.httpd.session.cookie.domain property. For example:
weblogic.httpd.session.cookie.domain=.mydomain.com "
I have tried this also by giving different versions of the above mentioned
line in
weblogic.properties file
i) weblogic.httpd.session.cookie.domain=.myServerName
where myServerName is name of the machine in which Weblogic App server
is running -
Best practice when using Tangosol with an app server
Hi,
I'm wondering what is the best practice when using Tangosol with an app server (Websphere 6.1 in this case). I've been able to set it up using the resource adapter, tried using distributed transactions and it appears to work as expected - I've also been able to see cache data from another app server instance.
However, it appears that cache data vanishes after a while. I've not yet been able to put my finger on when, but garbage collection is a possibility I've come to suspect.
Data in the cache survives the removal of the EJB, but somewhere later down the line it appear to vanish. I'm not aware of any expiry settings for the cache that would explain this (to the best of my understanding the default is "no expiry"), so GC came to mind. Would this be the explanation?
If that would be the explanation, what would be a better way to keep the cache from being subject to GC - to have a "startup class" in the app server that holds on to the cache object, or would there be other ways? Currently the EJB calls getCacheAdapter, so I guess Bad Things may happen when the EJB is removed...
Best regards,
/PerHi Gene,
I found the configuration file embedded in coherence.jar. Am I supposed to replace it and re-package coherence.jar?
If I put it elsewhere (in the "classpath") - is there a way I can be sure that it has been found by Coherence (like a message in the standard output stream)? My experience with Websphere is that "classpath" is a rather ...vague concept, we use the J2CA adapter which most probably has a different class loader than the EAR that contains the EJB, and I would rather avoid to do a lot of trial/error corrections to a file just to find that it's not actually been used.
Anyway, at this stage my tests are still focused on distributed transactions/2PC/commit/rollback/recovery, and we're nowhere near 10,000 objects. As a matter of fact, we haven't had more than 1024 objects in these app servers. In the typical scenario where I've seen objects "fade away", there has been only one or two objects in the test data. And they both disappear...
Still confused,
/Per -
Strange Gateway Error with one APP Server (WSAETIMEDOUT)
Hello Everyone,
We are experiencing a strange gateway timeout issue on one application server in our SAP environment. This started happening after we applied a series of Microsoft patches and updated the SAP kernals from 179 (DB 172) to 185 (DB 182).
From this App server we are seeing all kinds of gateway errors, the following is a sample from the dev_rd file from the server in question:
LOCATION SAP-Gateway on host sappe1exp5 / sapgw00
ERROR partner 'sappe1exp4:sapgw00' not reached
TIME Sat May 30 23:40:54 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10060
ERRNO TEXT WSAETIMEDOUT: Connection timed out
COUNTER 67
GwTraceHdlInfo:
HANDLE = 6
TIME = Sat May 30 23:40:33 2009
SOCKET = 468
STAT = NI_CONN_WAIT
TYPE = STREAM IPv4
OUT = 0 messages 0 bytes
IN = 0 messages 0 bytes
LOCAL = 0.0.0.0:2604
REMOTE = -
OPTIONS = BUFFERED
ni hdl = 6
type = CLIENT
net_stat = CONNECT_TO_REM_GW_PENDING
hostaddr = 10.10.0.21
opcode = NORMAL_CLIENT
conn opcode = REMOTE_GATEWAY
conn vers = 105
index = 59
data = 0000000000000000
ext_info = 000000000333DCA0
offset = 0
rest_len = 0
snc_forced = 0
remote gateway infos:
hostname =
hostaddr = 10.10.0.21
service = sapgw00
tpname = sapdp00
Sat May 30 23:46:17 2009
***LOG Q0I=> NiPConnect2: connect (10060: WSAETIMEDOUT: Connection timed out) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 6 / sock 428
(SI_ECONN_REFUSE/10060; I4; ST; 10.10.0.21:3300) [nixxi.cpp 2823]
I have done alot of searching and I have tried the following things:
1) Checked the services file of this machine, they line up with all other systems
2) Attempted to telnet to other App servers on 3200, 3300, 3600 with no success
3) tried to connect via SM59 to another App server with no success
4) Attempted to do all of these things in reverse from the another app server with the same results.
This is only happening with one app server in our landscape and this app server has no issues connecting to the CI.
Any ideas on where I can look further?
Edited by: James Wright on Jun 5, 2009 10:10 PMHi,
on sappe1exp5 try the following command in a dos prompt:
telnet sappe1exp4 sapgw00
this should also time out i.e. hang for a certain amount of time (~50 seconds) and then terminate with error.
It simply means that the IP address 10.10.0.21 is not reachable from your client PC.
Maybe you changed some IP addresses during patches. Usually there is an RFC destination that is not functioning properly.
Best regards
Carl Philipp -
Microsoft IIS as a re-direct in front of a Weblogic app server hosting ADF?
Has anyone had tried to set up Microsoft IIS as a re-direct in front of a WebLogic app server hosting ADF?
Can you please share the best practices, config params, etc?
Thanks and regards
AnilAny suggestions in this regard?
-
Weblogic App Server Memory Settings
Hi,
How memory management is happening weblogic app server and where I need to set the those things in weblogic server.
Thanks,You set memory argumnets for Weblogic in server start scripts - startWeblogic.sh & startManagedWeblogic.sh. You have MEM_ARGS arguments where you set your JVM minimum and maximun heap settings.
Weblogic JVM by default has parallel garbage collection algorithm.
- - Weblogic Consultant -
Problem : App works with Sun App server 8.0 but fails with 8.1
Hi All
I am experiencing some strange problem with executing my JSF application with Sun App Server.
I have an EAR deployed on Sun Application Server 8.0 and 8.1.
Strangely it works quite fine with 8.0 but fails with 8.1.
In my JSP page ..I have a dummy component whose getter method is used as a "FormLoad" event of the page.
<h:form id="imageForm" enctype="multipart/form-data">
<h:messages showDetail="true" />
<table width="980" border="1" cellpadding="0" cellspacing="0" bordercolor="#A9B8C2">
<tr>
<td>
<h:inputHidden value="#{Screen1.initializeService}"/>
<h:selectOneListbox styleClass="style2" id="cmbMiddleArea" immediate="true" value="#{Screen1.selectedMiddleArea}">
<f:selectItems value="#{Screen1.middleAreaList}" />
</h:selectOneListbox>
In my backing bean i have ..
public String getInitializeService() {
..... Retrieve all the data from DB to initialize all the components on the JSP page
.......setMiddleAreaList......
.......setSelectedMiddleArea.....
........set the values of the individal component...
I am retrieving all the data from DB in this getter method and intializing the components on the JSP page.
I have also checked the code generated for JSP by both the servers.I am posting the code here for reference although
i did not find any significant difference between the two...
For Server 8.0
private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
throws Throwable {
JspWriter out = jspxpage_context.getOut();
// h:inputHidden
com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
jspxth_h_inputHidden_0.setValue("#{searchBean.initializeService}");
int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
return true;
jspxtagPool_h_inputHidden_value.reuse(_jspx_th_h_inputHidden_0);
return false;
For Server 8.1
private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
throws Throwable {
PageContext pageContext = jspxpage_context;
JspWriter out = jspxpage_context.getOut();
// h:inputHidden
com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value_nobody.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
jspxth_h_inputHidden_0.setValue("#{searchBean.initializeService}");
int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
return true;
jspxtagPool_h_inputHidden_value_nobody.reuse(_jspx_th_h_inputHidden_0);
return false;
Now the actual problem is "getInitializeService" method never gets called when i deploy and run the application on Sun App Server8.1
However with Sun App Server 8.0 it woeks perfectly fine.
Can anybody help me in resolving these issues ?
Actually generated JSP code can be referred as ...
For Server 8.0
private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
throws Throwable {
JspWriter out = jspxpage_context.getOut();
// h:inputHidden
com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
jspxth_h_inputHidden_0.setValue("#{Screen1.initializeService}");
int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
return true;
jspxtagPool_h_inputHidden_value.reuse(_jspx_th_h_inputHidden_0);
return false;
For Server 8.1
private boolean jspxmeth_h_inputHidden_0(javax.servlet.jsp.tagext.JspTag jspxth_h_form_0, PageContext jspxpage_context)
throws Throwable {
PageContext pageContext = jspxpage_context;
JspWriter out = jspxpage_context.getOut();
// h:inputHidden
com.sun.faces.taglib.html_basic.InputHiddenTag jspxth_h_inputHidden_0 = (com.sun.faces.taglib.html_basic.InputHiddenTag) jspxtagPool_h_inputHidden_value_nobody.get(com.sun.faces.taglib.html_basic.InputHiddenTag.class);
jspxth_h_inputHidden_0.setPageContext(_jspx_page_context);
jspxth_h_inputHidden_0.setParent((javax.servlet.jsp.tagext.Tag) jspxth_h_form_0);
jspxth_h_inputHidden_0.setValue("#{Screen1.initializeService}");
int jspxeval_h_inputHidden_0 = jspxth_h_inputHidden_0.doStartTag();
if (_jspx_th_h_inputHidden_0.doEndTag() == javax.servlet.jsp.tagext.Tag.SKIP_PAGE)
return true;
jspxtagPool_h_inputHidden_value_nobody.reuse(_jspx_th_h_inputHidden_0);
return false;
} -
Weblogic App server 6.0 GUI Deployer
does the new Weblogic App server 6.0 contain GUI deployer application like it exits in 5.0weblogic.EJBDeployerTool
No. But, you can use the J2EE builder, currently located on our developer
center. Developer.BEA.com
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"vishal mehta" <[email protected]> wrote in message
news:3a79a258$[email protected]..
does the new Weblogic App server 6.0 contain GUI deployer application likeit exits in 5.0weblogic.EJBDeployerTool
Maybe you are looking for
-
I bought osx lion by mistake. How can I get a refund?
I was waiting desperately for OSX Mountain Lion, which was anounced for july. I went to the App store on july 2nd, I looked for Lion in the search tab, I did find an OSX Lion and I clicked BUY. It started download, but never got even 10% because of m
-
Can we call a method before and after Export operations in ADF 11g
Hi, My problem is I have to execute a method before and after the export operation.Is this posible in ADF 11g Regards, Felix
-
I deleted Imovie And I NEED IT BACK NOW!
today i accidently deleted my imovie app and i dont have a time machine set up so i dont know how to get it back. PLEASE HELP NOW!!!! IM DESPERATE TO GET IT BACK!!!
-
Regarding the Delta Logic in the Report
Hi Abap gurus, i have selection screen for 3 fields in one block called material, plant and extract date. if the user selects the extract date as todays date then data has to fetch the as per todays date. i have two radio buttons on the selection s
-
How to setup ADF EA14 in JDevelopr 10.1.3.0.2
Hi. JDeveloper 10.1.3.0.2 adf-faces-ea14.zip (~15MB) I can't use live update from JDeveloper because that PC doesn't have internet connection. I try "Install From Local File" and choose adf-faces-ea14.zip, but I get this: "Zip file adf-faces-ea14.zip