OAM 10g attribute is not visible in object class in Identity System console

Hi All,
This is about OAM 10g environment with OID used as user/config/policy store. There are one custom user object class and custom attributes defined in Identity System console already. Now there is a requirement to add another custom attribute to that already existing custom user object class.
I have created the attribute in schema through ldap command and I am able to see it in LDAP browser as well. However even after restarting OAM identity server and webpass services, the attribute is not visible in Identity System console -> Common Configuration -> Objectclasses -> Custom object class.
Appreciate any help. Please treat this as urgent.
Thanks
Mahendra.

The solution is to add the attributes in OVD schema as OVD is the user store.

Similar Messages

Navigational attribute data not visible in BEx Report

Hello All,
I am facing following problem in one of my BEx reports:
I am fetching data from an ODS. With other columns of ODS, I have also to show few navigational attributes( which are master data of some info-object) . In report the corresponding data in navigational attributes is not visible for few records, although when I see the master data of this Info-object (whose navigational attributes I have to include), in Adm. Wrkbench the data is visible. I wonder what step is missing.
Many Thanks for helping me out.
Best Regards,
Sumita

Hi Roberto,
While trying to activate the Infoobject's master data (by right-click) I get the following message,
"Lock NOT set for: Loading master data attributes"
And the data is not activated.
Can you please suggest what needs to be done.
Thanks & Regards,
Sumita

Install of 10.1.4.0.1 OAM Identity System Console link goes to blank page

I am installing OAM in order to test a .Net Application Integration (IPM 10g). I have been working from the install doc for 10.1.4.0.1 and have got to the point of installing WebPass (Chapter 5 of the install doc). I have installed that component and the "http://ohstest:7777/identity/olbix" page comes up. I am running against an OID install on the same VM running windows 2003 R2.
I headed into chapter 6 and "Setting Up the Identity System". Unfortunatly, when I click the "Identity System Console" link, after a long delay a blank page comes up and the URL is:
http://ohstest:7777/identity/oblix/apps/admin/bin/front_page_admin.cgi
It does this for the User Manager link as well. A blank page at:
http://ohstest:7777/identity/oblix/apps/userservcenter/bin/userservcenter.cgi
I am not sure where to look to identify the problem. Anyone have any suggestions?
John

I looked in windows event viewer and found that there was more than just the information that was displayed in the dialog. The event viewer says "Oracle Access Manager Identity Server (OracleIdentityServer_0789) is not a valid Win32 application". This indicates to me that it probably was not even able to load the service provider server.
The path to the service exe is --> "C:\Program Files\NetPoint_01\identity\oblix\apps\common\bin\ois_server.exe"
Message was edited by: John Jumper - added path
JohnJ

Unable to modify user password through OAM identity system console.

HI,
I am trying to reset the password of a user through OAM Identity console.
I had logged in through orcladmin(admin), and tried to update the password for users, as well as orcladmin also.
After clicking save, its giving me error "Modify User Entry Failed" and password is not updated in LDAP
Also note that I am able to modify any other attribute of that user like last name, title, firstname etc through identity console.
Its only user password attribute which is not geting updated.
I am user OVD, which is integrated with OID & AD for user store.
Also I tried to set "Access Attribute control" for modifying user password, but that didnt help.
Kinldy suggest if you have came across this kind of issue.
Regards,
Ankit.

HI,
Thanks for the replies.
As my OVD is integrated with OID & AD both, I am picking up the users from OID for update.
Also the SSL is configured betveen OVD & AD, but still AD user password is also not successfull.
Niether of two is working.
I am not able to create a user through Identity System console, as I had not configured workfllow.
I believe for updating user attibute, workflow defination need not to be define.
Also As I had mentioned before, I am able to modify all the other attributes other than user password.
Also Schema is extended properly.
Thanks & Regards,
Ankit

Install of 10.1.4.0.1 OAM Identity System Console link blank AGAIN

I am now having a similar problem to the one that started the following thread:
Install of 10.1.4.0.1 OAM Identity System Console link goes to blank page
When I click "Identity System Console" I get a blank page.
This is a different problem than that thread because I have verified the Identity Server is up and running (which solved my problem last time). I have also checked the log file at NetPoint\WebComponent\identity\oblix\logs\oblog.log and found the following error being reported over and over:
2008/05/14@18:14:26.359000     1288     6112     CONN_MGMT     ERROR     0x00001C06     watcher_thread.cpp:52     "Unable to create wrapper for socket"     Error^Socket read error during simple authentication
...AND this warning:
2008/05/14@18:14:26.453000     1288     3524     CONNECTIVITY     WARNING     0x00002101     ois_service_client.cpp:1304     "The server this component is trying to establish a connection to is not available"     function^ObOISServiceClient::SendMessage
What changed from my previous successfull install is I rolled back to a snapshot of the Windows 2003 Server VM where it is in a workgroup rather than the domain and reinstalled the Oracle Identity Server and WebPass over the OID that had been installed previously.
You may ask why I did this...Because OID was installed outside the domain and I could not use OID DAS because the configuration of OID must have assumed at install that it would be in that workgroup and I could not successfully log into OID DAS.

I did the telnet to "OHSTest 6022" and it responds with "SMPL" which I assume stands for Simple which is what I configured. Looking at the webpass.xml file - it does have 6022 as the port (See Below). I do notice that there is no primary server defined but there is a secondary server. Could that be the problem (See the portion of the config file below)?
    <ValList
        xmlns="http://www.oblix.com"
        ListName="primary_server_list">
        <ValListMember
            Value="server1"></ValListMember>
    </ValList>
    <ValList
        xmlns="http://www.oblix.com"
        ListName="secondary_server_list"></ValList>
    <ValNameList
        xmlns="http://www.oblix.com"
        ListName="server1">
        <NameValPair
            ParamName="host"
            Value="OHSTest"></NameValPair>
        <NameValPair
            ParamName="port"
            Value="6022"></NameValPair>
        <NameValPair
            ParamName="numOfConnections"
            Value="1"></NameValPair>
    </ValNameList>

Can not login to the Identity System Console

Hi,
I forgot username and password for logging into OAM Identity System Console. Is there any admin user which can connect?
How can I find user able to connect and change password.
Tnx!

I will answer to myself.
I have reconfigured IC (change setup.xml status to incomplete) and restart OIM.

Navigational attributes are not visible after transport

hi,
i have created five new info objects and added these to 0custome as navigational attributes,then i have switched thes on as navigational attributes in 0sold_to info object.every thing is working fine in deveopment.
when i transport these into quality, for 0customer i am able to see these new info objects as navigational but in 0sold_to these new info objects are visible as display attributes.I want tehse to be as navigational attributes..
can any one tell me where have i gone wrong..
thanks in advance..
satish

Hi,
The SAP Best Practice says that while transport
Request 1: Select the Necessary objects of Info Provider
Request 2: Select Data Flow before and Afterwards
if you practice this you will not miss any objects
regards
Happy Tony

Function and attribute tabs not visible in ppoma_crm

Hello Experts,
Function and Attribute tab at the sales organization level is not visible in PPOMA_CRM transaction code for one of the user.
Is it due to some authorization issue ? or anything else ?
Before taking a system trace for that specific user, I would like to know if we are missing anything functionally
Kindly revert
Thanks and Regards
DJ

Hi DJ,
Please see note 926540 - Missing Organisational units
But from your description this does not seems to be the exact symptom.
Yes I would advise to run a SU53 authorization check.
Best regards - Christophe

Some of the Master Data Attributes DataSources not visible in RSA5

Hi Experts,
After installation of R/3 ECC 5, some of the master data attributes datasources are not visible in RSA5.
Do i need to do any other settings to get them.
Awaiting response....
Thanks in advance.....
Rafi

Hi Prakash,
Thanks for quick response. I have checked those tables. i found that i have same datasources as it is in RSA5.
For example: i have 0SALE_DIST_TEXT in both RSA5 and ROOSOURCE, how i can have the attributes for the same.
also i don't have attributes datasource for Customer Group1...5, Material Group1...5, sales office etc.,
Anticipating your response,
Thanks
Rafi

Unable to map/get Attributes with import of LDIF Object Class

Hi All,
We are trying to take import of Customized Object Class and Attributes into OID through LDIF.
LDIF import command is:
./ldapadd -p 3060 -h myhost -D "cn=orcladmin" -w Ac123456 -f xyzObjClass.ldif
LDIF contents are:
dn: cn=subSchemaSubentry
changetype: modify
add: objectclasses
objectclasses: ( 1.3.6.1.4.1.1436.2.46 NAME 'ProviderObjClass' SUP ( organizationalPerson $ person $ top ) STRUCTURAL MAY ( attr1 $ attr2 ) )
Note: attr1 and attr2 are already imported into OID.
Result: We are able to create Object Class and also able to inherit Super Class. But we are not able to map the attributes to our Object Class.
Can anybody help me in importing ?
Thanks & Regards,
Newbie

Again, I don't work with Java and you should ask Java-related question in Flex (or Java) forum.
Java or not - you need to package your server side language specific object into something that AS understands (text, XML, AMF object) and load this data into AS via, perhaps, URLLoader. Or you can open socket. Then you parse this data with AS3 code in SWF.

Not able to create users in identity system -OAM

Hi all,
I am new to OAM and trying to create users from identity system -OAM.
I have logged in as 'orcladmin', who is my 'Master Administrator' and 'Master identity Administrator'.
To create the user, I click on 'User Manager' tab and then 'Create user identity' tab but I get a message saying
"*You do not have sufficient access rights*."
Same message comes up when I try to create groups also.
Please guide me on how I can give these rights to 'orcladmin'.
It will be helpfull if you can specify some links where I can learn the basic consepts of OAM(identity system and access system).
Thanks in advance
Roopa

Hi,
Before you attempt to create a user, you would need to create a workflow in OAM Identity System.
Below is the link which will get you started -
http://download.oracle.com/docs/cd/E15217_01/doc.1014/e12489/workflow.htm#BABEFGAA
-- Pramod Aravind

Effect Attributes are not visible

Hi,
On one of the machines where FreeHand is installed, I am not
able to see the attributes of any effect which I add to my path. I
see the attributes area as TOTAL BLANK.
Can anybody let me know that what property helps me get back
the attributes for any effect which I add to my path.
Regards
Rajesh Chadha

rajesh_chadha wrote:
> On one of the machines where FreeHand is installed, I am
not able to see the
> attributes of any effect which I add to my path. I see
the attributes area as
> TOTAL BLANK.
It sounds like a system or installation problem. What is your
platform and
OS?
If you're on a Mac, perform the usual trouble-shooting
routines of using
Disk Utility to verify and repair disk permissions. If that
doesn't help, I
expect you'll have to reinstall FH.
Judy Arndt

Attributes are not visibles in drop down

HI EXPERTS,
When i am trying to fix the setting attributes in shopping cart,the drop down of the attributes is blank.The error is occiring to myself only for another user is ok. Please suggest.
Thanks & Regards
VINAY.

Hello,
Try checking your user ID's assignment to org structure
and consistency
BBP_BP_OM_INTEGRATE
USERS_GEN
BR
Dinesh
(Reward if helps)

Why is Flash CC not publishing the "object class id" and the !--[if !IE] -- code like CS6 does?

Here is the HTML I get when I publish with CS6:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
          <head>
                    <title>tooneat_CS6</title>
                    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
                    <style type="text/css" media="screen">
                    html, body { height:100%; background-color: #000000;}
                    body { margin:0; padding:0; overflow:hidden; }
                    #flashContent { width:100%; height:100%; }
                    </style>
          </head>
          <body>
                    <div id="flashContent">
                              <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="2560" height="1160" id="tooneat_CS6" align="middle">
                                        <param name="movie" value="tooneat_CS6.swf" />
                                        <param name="quality" value="best" />
                                        <param name="bgcolor" value="#000000" />
                                        <param name="play" value="true" />
                                        <param name="loop" value="true" />
                                        <param name="wmode" value="window" />
                                        <param name="scale" value="showall" />
                                        <param name="menu" value="false" />
                                        <param name="devicefont" value="false" />
                                        <param name="salign" value="" />
                                        <param name="allowScriptAccess" value="sameDomain" />
                                        
                                        <object type="application/x-shockwave-flash" data="tooneat_CS6.swf" width="2560" height="1160">
                                                  <param name="movie" value="tooneat_CS6.swf" />
                                                  <param name="quality" value="best" />
                                                  <param name="bgcolor" value="#000000" />
                                                  <param name="play" value="true" />
                                                  <param name="loop" value="true" />
                                                  <param name="wmode" value="window" />
                                                  <param name="scale" value="showall" />
                                                  <param name="menu" value="false" />
                                                  <param name="devicefont" value="false" />
                                                  <param name="salign" value="" />
                                                  <param name="allowScriptAccess" value="sameDomain" />
                                        
                                                  <a href="http://www.adobe.com/go/getflash">
                                                            <img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
                                                  </a>
                                        
                                        </object>
                                        
                              </object>
                    </div>
          </body>
</html>
And here is the HTML I get when I publish with CC:
<!DOCTYPE html>
<html>
          <head>
                    <meta charset="UTF-8">
                    <title>tooneat</title>
                    <style type="text/css" media="screen">
                    html, body { height:100%; background-color: #000000;}
                    body { margin:0; padding:0; overflow:hidden; }
                    #flashContent { width:100%; height:100%; }
                    </style>
          </head>
          <body>
                    <div id="flashContent">
                              <object type="application/x-shockwave-flash" data="tooneat.swf" width="2560" height="1160" id="tooneat" style="float: none; vertical-align:middle">
                                        <param name="movie" value="tooneat.swf" />
                                        <param name="quality" value="best" />
                                        <param name="bgcolor" value="#000000" />
                                        <param name="play" value="true" />
                                        <param name="loop" value="true" />
                                        <param name="wmode" value="window" />
                                        <param name="scale" value="showall" />
                                        <param name="menu" value="false" />
                                        <param name="devicefont" value="false" />
                                        <param name="salign" value="" />
                                        <param name="allowScriptAccess" value="sameDomain" />
                                        <a href="http://www.adobe.com/go/getflash">
                                                  <img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
                                        </a>
                              </object>
                    </div>
          </body>
</html>
Also why are the DOCTYPE html and html tags different? The HTML published by CC is missing all that jazz about W3C....??

Nested object embeds when used with IE conditionals actually have greater compatibility, but we're stretching the mark back to IE5-8:
http://www.bobbyvandersluis.com/flashembed/testsuite/
You can see SWFObject's example communication with callback page utilizes it (view source):
view-source:http://www.bobbyvandersluis.com/swfobject/testsuite_2_2/test_com2.html

One drive of office 365 not visible on windows 8.1 operating system

I have recently installed Windows 8.1, when I login to my office 365 account I am not able to se any of the files present in One Drive. Office 365 support people say that there is no problem with office 365 but its a windows problem.
Can any one help me with this.?

Hi,
Did you store any file in your OneDrive? In addition, you need to sign in your OneDrive, you could see all file in your OneDrive.
The login address is below:
https://login.live.com/login.srf?wa=wsignin1.0&rpsnv=12&ct=1401677587&rver=6.4.6456.0&wp=MBI_SSL_SHARED&wreply=https:%2F%2Fonedrive.live.com%2F%3Flc%3D1033%26mkt%3Den-US&lc=1033&id=250206&cbcxt=sky&mkt=en-US&cbcxt=sky
If you refer to sign in your PC with this Microsoft account to browse your OneDrive, remember to keep your files and settings in sync.
Karen Hu
TechNet Community Support

OAM 10g attribute is not visible in object class in Identity System console

Similar Messages

Maybe you are looking for