Oam does not show the correct configuration information

Oracle apps,
An issue with the oam.
There are 2 nodes in our system. In 12
One is for db and cm
The other is for forms and apache.
The system is running fine.
But from the OAM, where it does not show the correct configuration info.
From the OAM, all the services are (including db, cm, forms, apache) on one node.
The issue might be caused by the fact that the web tier was cloned from the cm tier as a workaround for some patch errors in web tier.
I even used the EXEC FND_CONC_CLONE.SETUP_CLEAN; to clean the system tables and ran
Autocfg on all tiers. But it didn’t solve this issue.
How can I fix this OAM problem to make it show the correct information?
Thanks,
Lily

Thanks for reply.
Yes, I did commit it.
The hostname information is correct.
On oam, this web node is there but all the service actually running on this node is
showing under the cm node .
<TIER_DB oa_var="s_isDB">NO</TIER_DB>
<TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
<TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
<TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
<TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
<TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
<TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
<TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>

Similar Messages

Mini Calendar does not show the correct date

Hi there ,
in iCal on the bottom left side of the window is the mini Calendar, when I switch between months in this mini Cal,it does not show the correct month anymore and even the button "Today" can not revert the day back ( for example we are now in September, when I open iCal it shows it correctly but after going to next or previous months using the triangles on this mini Cal, the problem comes up ! )

Maybe it wasn't receiving the correct info from your carrier. You're supposed to turn your phone off once in a while so the carrier can update stuff. I had originally heard that you should do it once a day but I never did that.

Hp 15-r033tx laptop does not show the Nvidia chipset information and only uses Intel HD graphics

My Hp 15 r033tx laptop has windows 8 64 bit installed in it and as it comes with NVidia Ge Force 820 M 2GB graphics card , I have also installed Nvidia and Intel HD Graphic Drivers but in the dxdiag selection it does not list the Nvidia Chipset and information but only lists Intel HD Graphics with 1786 MB.
Also it does not show any Dedicated Video Ram that is normally showing in my other friends desktop with Nvidia Graphics properly installed
Any solutions?

Hi @Suraj2410 ,
Thank you for your inquiry, I will do my best to help.
I see that you have Windows 8 installed and are not seeing your switchable graphics.
When I checked the specification page I see it came with Free Dos. When I checked for support drivers they are listed for Windows 7 and Windows 8.1.
HP 15-r033tx Notebook PC specifications
HP 15-r033tx Notebook PC Drivers
Here are three document to assist you with overcoming this difficulty.
Resolving Video and Graphics Issues
Overview of Switchable Graphics or Dual GPUs
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
If you are still having difficulties, with it being a recent purchase, I suggest contacting HP support for assistance.
Please call our technical support at 800-474-6836. If you live outside of the US/Canada Region, please click the link below to get the support number for your region. Phone Assist Worldwide
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Open file dialog search does not show the correct files

When i use "open file" in the menu of, for example Pages, and then type a word of my desired file name into the search dialog it does not always find the file. Searching in Finder works. And the file is where it is supposed to be.
Does it use different kind of searches? I have "reindexed" spotlight but no avail.
Of course i can look for the file manually and then start pages by double clicking the file...
Any ideas?
thanks wolf

I'm not sure how Pages treats this, but it's possible that from an Open File dialog it may only search either the current directory or the default documents folder. Not sure about this as I'm not a Pages' user.

WBS Summary does not shows the correct Orignial Duration

Hi Friends,
Currently I am using WBS Summary or Level of Effort type of activity on top of my every WBS and I am assigning all my resources to that activity to save the time rather than assigning resources with each and every activity.
But, in my new project I have the activities which has a scattered durations like one activity starts on 3 rd day another starts on 25th day. So, my project is not planned to go smooth or linear. So, if I am counting the total duration for that particular WBS is 25 days but in WBS Summary it shows me 250 days and it is also spreading my resources for 250 days while I am using the resources only for 25 days. Still, the resource usage and costing shows me the same amount.But, I am concern about the resource Usage Assignments which is not correct.
So, I will appreciate any kind of solution with this problem and it will make my life easier.............
Thanks in advance
Edited by: user13349410 on Jul 6, 2010 10:19 AM

Jawad,
i agree the methods you mentioned are good general advice when it comes to sound planning. but they are considerably more time consuming than proper
"who does what" resource assignment to tasks. further more #2 and #3, may need even more manual work to accomodate changes into the project schedule or scope or when dealing with conflicting requirements.
proper resource loading of your schedule is preferable, even using conventional default settings such as:
- linear distribution of effort (units/ costs). no curve or future bucket planning which IMO, depending on required level of detail, can prove to be overkill;
- activity driven resource dates. whenever possible, it is much simpler to "split" activities or better yet create as many as you need in the first place, so that resource allocation start/finish dates coincide with activity start/finish dates for all resources assigned to the activity, rather than having resource lags, non-linear curves or future buckets;
- no artificial constraints on activities, but proper relationships of required type and lag;
- no fixed artificial non-working periods set in activity and/or resource calendars (other than legal/ organisation/ project standards dictate or are so set by technical, workflow, environment or availability reasons that may apply).
especially since calendars are likely to have different requirements, when existing calendars are reused within project and especially in other projects (global calendars).
best regards,
Tibi

ME23n , Does not shows the values correctly in print preview

Hi,
When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
For example;
This is the vendor & its address. (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A & COLOMBO - 04 , then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview. As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
If its 2 or more words, it shows correctly.
If its 1 word, then its not showing!
Why it is happening like that? Any ideas how to resolve this issue?
regards.
zerandib

It turns out that this problem went away after the program crashed. Everything seems to be working well now.

Installer is not showing the correct Nodes in RAC

Hi Experts,
We are in the process of upgrade oracle database from 9.2.0.3 to 9.2.0.8 in RAC. While installing the 9.2.0.8 patch set it is not showing the correct database nodes, instead of it showing production database nodes, but we are doing doing it in test machine.
Test Machine hostname:
db1
db2
Prod machine hostname
prod1
prod2
it showing the prod1 and prod2 only.
please suggest us to solve this
Note:
We copy the oracle_home from prod to test for test database cloning.
Thanks
R.Sundaravel

Then it is highly likely your RAC cluster is not correctly configured.
Open an SR at metalink as the Cluster Verify tool does not exist for your old version.

Why this query does not show the result?

Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
ERROR at line 1:
ORA-00933: SQL command not properly ended
SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
no rows selected
SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
69662              HR                                 TABLE
                   OE                                 SYNONYM
SQL> SELECT USER FROM DUAL;
USER
SYS

Hi,
the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
Herald ten Dam
Superconsult.nl

How do I locate harddisk content like I do in explorer. Finder does not show the hardisk

How do I locate harddisk content (Files/folders) like I do in windows explorer. Finder does not show the hardisk?? Please suggest.
Thanks

Open Finder preferences, select General icon in the toolbar, check the boxes for what to display on the Desktop. Click on the Sidebar icon where you can configure what's displayed on the sidebar.

Nexus 7009 does not show the N7K-F248XP-25 modules ethernet ports n sh run

Hi everyone,
I have a question...
I going to install two Nexus 7009 with three N7K-F248XP-25 modules on each one, I am planning to create 3 VDC, but at the initial configuration the system does not show the Ethernet ports of these modules, even with the show inventory and show module I can see that the modules are recognized and its status is OK. There is something that I have to do before start to configure these modules...? enable some feature or license in order to see the ports with show running CLI...?

You can enable F1, F2, M1, M1XL and M2XL Series modules. There are no restrictions on the type of mix allowed for the system module-type command. The system module-type command allows a mix of F1, F2, M1, M1XL, and M2XL Series modules in the VDC.
Note The limit-resource module-type command controls the restrictions on the module-types that can be mixed in the VDC.
Note Use the system module-type f2 command to allow F2E Series modules into a VDC. The ports from F2 and F2E Series modules can be allocated like any other ports.
Note The modules that you do not enable must not be powered on after you configure this feature and enter yes. An error message will force you to manually disable these modules before proceeding. This prevents major disruption and service issues within a VDC.
The no form of this command resets the configuration mode to allow all modules.
hope this helps

BBP_MON_SC : does not show the details of the Shopping cart

Hi,
We are in SRM4.0 and Stack 11.
when we use the transaction:BBP_MON_SC to check the Shopping cart and get into the details, the system does not show the "details of the shopping cart".
The sequence of the steps :
1) click on the "monitor shopping cart"(BBP_MON_SC) in our web browser
and search the SC by date.
2) The list of the SC created on the specific date come up.
3) when we select a SC to get into the details the system shows
a "BLANK SCREEN".
Thanks in advance.
Regards,
RK.

Hi,
First check whether you have implementedany custom BADI at the SC item level.If the BADi is wrongly implemented then you may not be able to see the item details.
Also Make sure that BASIS Team has assigned correct roles and profiles to the administrator user. Ask BASIS to use SAP provided roles and then you can try out again. (Try this role - SAP_EC_BBP_ADMINISTRATOR / SAP_BBP_STAL_ADMINISTRATOR )
Here are the related links ->
http://help.sap.com/saphelp_srm50/helpdata/en/a0/10213862f7bd47e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/9f/a47c3c989d501fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/15/46d19e4069d14e92decb87d6a56b9c/frameset.htm
Incase it does not help, then, Without assigning any other roles, try logging to the transaction - BBP_MON_SC via SAP GUI instead of webpage and then do once you get some authorization issue /error, using SU53 Transaction, you can get the required Authorization objects need to attached to the user profile.
Alternatively, For time being, Try assigning SAP_ALL and SAP_NEW to the Administrator Buyer user role of that user.
Also have a look at these notes:
Note 636270 Shopping cart monitor: Display of SC if user is deleted
Note 764135 Shopping cart monitor: Selection according to 'Created by'
Note 865179 BBP_MON_SC: Search for shopping carts shows wrong results
Note 683524 Shopping cart monitor does not display all shopping carts
Note 1045386 BBP_MON_SC: No DELETED Event after deletion
Note 829529 BBP_MON_SC: Displaying shopping cart of a locked user
901427 BBP_MON_SC: Requester instead of creator in overview list
859012 BBP_MON_SC: Deleted shopping carts are not found
882884 BBP_MON_SC: Deleting items in the status I1116
792542 Shopping cart monitor: incor. return URL from shopping cart
672764 Shopping cart monitor: Display of deleted shopping carts
Note 522620 Shopping cart monitor: Customer enhancement / BADI
Note 889942 BBP_MON_SC: Service item can't be searched by perform.period
949399 SC monitor: Search help does not display all catalogs
972697 bbp_mon_sc: No result for limit shopping cart search
901608 BBP_MON_SC: Service Item search is incorrect
813434 Shopping cart monitor and internal ITS:Shopping cart display
669720 BBP_MON_SC: Follow-on document is not found
625694 Not possible to search for SHB based on some docs in monitor
596089 SHP Monitor: problems with search functionalities
Note 561186 Monitor shopping cart: Selection of large datasets
BR,
Disha.
Pls reward points for useful answers.

ITC - Build 1.x.x does not contain the correct beta entitlement.

Hi,
I have a major problem when uploading Builds via the Application Loader (2.9.1) to iTC.
- I use Flash CC 2014 to create my iOS Apps.
- I recreated my certificates, p12 and mobile provisioning profiles.
- I can Upload my Builds via Application Loader without any error messages. Everything is fine here!
- Then in iTC it takes several minutes (5-45) until the Apps Appear.
- I am able to "Add a Build" in the first "Versions" Menu!
BUT in "Prerelease" it looks like this:
... all Builds are marked as "Invalid Binary"
Message: "Build 1.2.2 does not contain the correct beta entitlement. For more information, see the iTunes Connect Developer Guide."
Even though all Builds are marked as "Invalid" they can be selected and I can submit them for review.
... the sad thing is - another App with the same Status "Invalid Binary" is waiting for review for almost 2 weeks now and nothing happens.
Can anyone please tell me what I have to do? It seems Apple does not review Apps with this Status . Normally I get an email from iTUnes connect saying something like:
"Dear developer,
We have discovered one or more issues with your recent delivery for "XYZ". To process your delivery, the following issues must be corrected:
... but this time - NOTHING! :-(
Please help!
Thanks
Jan

You are likely to get better replies by asking in the developer forums (this forum is for questions about using/buying from the store) : https://devforums.apple.com/index.jspa

The illustration does not have the correct number of operands...

I work on a Macbook Pro 10.8.5. When I open a file in AI CC and place any number of images, save and close the file. When I reopen the file I get this message. 'Can't open the illustration. The illustration does not have the correct number of operands for an operator... etc.' The file scan still open after this but all the placed images disappear.
I've tested placing different formats ie. JPGs, TIFs, PNGs, flattened PSDs etc. They all come up with the same error.
I've searched in Google and I haven't found a solution yet. There was a suggestion to import the AI file in INDD, this doesn't help beause all copy converts to outlines and embeds the images.
Can anyone help?

Hi, just tried this and AI says 'Could not open the file'. Here's a couple of screen grabs to show you my file setup and the exact error message.

After update to IOS 6.0, on the iPhone 4 and 4s, emails can not be forwarded. I tried to resync, but the update does not show the forwarding buttons anymore.

After update to IOS 6.0, on the iPhone 4 and 4s, emails can not be forwarded. I tried to resync, but the update does not show the forwarding buttons anymore.

Have the same issues here, 3GS 5.0.1. Did you find any solutions until today ?
I restored my phone, power up/down but nothing helps with my issues
greetings
/Edit:
Maybe I should read carefully your text so I can give you some more information.
my phone was updated via itunes.
some hours ago the phone charged up to 5% but than directly draining to zero...
can't help me with these issues...

Field Explorer in Crystal Reports does not show the same names as Bex Query

Hi
I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
I would like it to display the field explorer as shown in this blog.
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Thanks in advance

Hi,
take a look here:
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
Ingo

Oam does not show the correct configuration information

Similar Messages

Maybe you are looking for