OAM domain configuration: question

When installing OAM, and during domain configuration for OAM specific, in the following
screen where you select Admin Server, Managed Server, Cluster, Deployment Services etc
there are two more options
JMS File Store and JMS Distributed Destination which do not show up- these only show
up for domain configuration for OIM.
Question: Why JMS options do not show up during OAM domain config? But show up
during OIM domain config.

Unfortunately this is currently not a supported configuration. A domain must contain a single ALSB cluster. This is something we are looking to improve in the future.
Gregory

Similar Messages

How to automate domain configuration creation for OAM11g

Hi
Please let me know is there any way to automate the domain configuration creation for OAM 11g .
For ex- Using config.sh in silent mode to create the domain.
Oracle Access Manager - Version 11.1.1.5.0
Thanks
Anil

You probably answered your own question. Yes, you can use silent installation for creation and configuration of OIAM products.
Ref: Silent Installation
-Bikash

OAM 10g - Simple question (I think)

Hey guys, I want to run something by you to see if I'm missing something critical. What I'm trying to do is fairly simple...
I want 2 login forms for the same webpage, depending on which hostname is used.
internal.mydomain.com
external.mydomain.com
both of these point to an IIS box, which is configured to receive on *:80.. no hostheaders defined.
Originally, there was only the internal.mydomain.com and that is all setup and working. Accessing http://internal.mydomain.com/secret brings up my "Custom Internal Form".
I want to add the ability so that when http://external.mydomain.com/secret is acccessed, it brings up my "Custom External Form".
I have set up a new Host Identifier with external.mydomain.com
I have copied the policy domain to "My Policy - External" and set it to the new Host Identifier, and specified to use Basic Over LDAP (as a quick test, will create the actual form later)
When I access external.mydomain.com/secret I keep getting the "Custom Internal Form".
When I perform an Access Test within oam to the same URL, it shows the correct ("My Policy - External" ) policy domain in the evaluation result, aka.
This tells me that OAM is configured correctly, but the WebGate isn't reporting properly the host header used.
Any ideas? I would very much appreciate any insight or suggestions.
Thanks very much

Hi Alex,
Couple of things:
1. Please check if there is any proxy configured in external.domain.com to route requests to internal.domain.com
2. Is Login page residing in same webserver as protected page? If so, it will be different for internal and external domains as it will be seperated by a firewall. I would configure a single authentication scheme without specifying anything in challenge redirect field so that Login page will be thrown from the webserver where it is called for secured page.
3. Please check whether you are able to access login pages of both external and internal domains directly and check for any errors in webserver logs.
Please post the results.
Hope this helps!
-Mahendra

Configuration question on css11506

Hi
One of our vip with 4 local servers, currently has https. the http is redirected to https.
Now, my client has problem which a seriel directories need use http, not https. some thing like. quistion:
     1. If there is any possible, I can configure the vip to filter the special directories and let them to use http not https. and rest pages and directories redirect to https?
     2. If not, I can make another vip to use same local servers, but, is possible to only limited to special directories? and with wild code? some like the directories are partially wild coded, something like, http://web.domain/casedir*/casenumber?
     3. if not on both option, is any way I can fix this problem?
Any comments will be appreciated
Thanks in advance
Julie

I run my Tangosol cluster with 12 nodes on 3
machines(each machine with 4 cache server nodes). I
have 2 important configuration questions. Appreciate
if you can answer them ASAP.
- My requirement is that I need only 10000 objects to
be in cluster so that the resources can be freed upon
when other caches are loaded. I configured the
<high-units> to be 10000 but I am not sure if this is
per node or for the whole cluster. I see that the
total number of objects in the cluster goes till
15800 objects even when I configured for the 10K as
high-units (there is some free memory on servers in
this case). Can you please explain this?
It is per backing map, which is practically per node in case of distributed caches.
- Is there an easy way to know the memory stats of
the cluster? The memory command on the cluster
doesn't seem to be giving me the correct stats. Is
there any other utility that I can use?
Yes, you can get this and quite a number of other information via JMX. Please check this wiki page for more information.
I started all the nodes with the same configuration
as below. Can you please answer the above questions
ASAP?
<distributed-scheme>
<scheme-name>TestScheme</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
<local-scheme>
<high-units>10000</high-units>
<eviction-policy>LRU</eviction-policy>
<expiry-delay>1d</expiry-delay>
<flush-delay>1h</flush-delay>
</local-scheme>
</backing-map-scheme>
</distributed-scheme>
Thanks
RaviBest regards,
Robert

SAP-JEE, SAP_BUILDT, and SAP_JTECHS and Dev Configuration questions

Hi experts,
I am configuring NWDI for our environment and have a few questions that I'm trying to get my arms around.
I've read we need to check-in SAP-JEE, SAP_BUILDT, and SAP_JTECHS as required components, but I'm confused on the whole check-in vs. import thing.
I placed the 3 files in the correct OS directory and checked them in via the check-in tab on CMS.   Next, the files show up in the import queue for the DEV tab. My questions are what do I do next?
1. Do I import them into DEV? If so, what is this actually doing? Is it importing into the actual runtime system (i.e. DEV checkbox and parameters as defined in the landscape configurator for this track)? Or is just importing the file into the DEV buildspace of NWDI system?
2. Same question goes for the Consolidation tab.    Do I import them in here as well?
3. Do I need to import them into the QA and Prod systems too? Or do I remove them from the queue?
Development Configuration questions ***
4. When I download the development configuration, I can select DEV or CON workspace. What is the difference? Does DEV point to the sandbox (or central development) runtime system and CONS points to the configuration runtime system as defined in the landscape configurator? Or is this the DEV an CON workspace/buildspace of the NWDI sytem.
5. Does the selection here dictate the starting point for the development? What is an example scenarios when I would choose DEV vs. CON?
6. I have heard about the concept of a maintenance track and a development track. What is the difference and how do they differ from a setup perspective?   When would a Developer pick one over the over?
Thanks for any advice
-Dave

Hi David,
"Check-In" makes SCA known to CMS, "import" will import the content of the SCAs into CBS/DTR.
1. Yes. For these three SCAs specifically (they only contain buildarchives, no sources, no deployarchives) the build archives are imported into the dev buildspace on CBS. If the SCAs contain deployarchives and you have a runtime system configured for the dev system then those deployarchives should get deployed onto the runtime system.
2. Have you seen /people/marion.schlotte/blog/2006/03/30/best-practices-for-nwdi-track-design-for-ongoing-development ? Sooner or later you will want to.
3. Should be answered indirectly.
4. Dev/Cons correspond to the Dev/Consolidation system in CMS. For each developed SC you have 2 systems with 2 workspaces in DTR for each (inactive/active)
5. You should use dev. I would only use cons for corrections if they can't be done in dev and transported. Note that you will get conflicts in DTR if you do parallel changes in dev and cons.
6. See link in No.2 ?
Regards,
Marc

How can I list all the domains configured for Weblogic Servers?

How can I list all the domains configured for Weblogic Servers?
I saw a note, which says the following:
"WebLogic Server does not support multi-domain interaction using either the Administration Console, the weblogic.Admin utility, or WebLogic Ant tasks. This restriction does not, however, explicitly preclude a user written Java application from accessing multiple domains simultaneously."
In my case, I just want to list all the domains, is that possible by using any scripts?
Thanks
AJ

If you use WLS Node Manager and the Config Wizard was used to create the domains, then the list of domains should be in a location like this:
<MIDDLEWARE_HOME>\wlserver_10.3\common\nodemanager\nodemanager.domains
Enterprise Manager Grid Control also has support for multi-domain management of WLS in a console.

Can't run Domain Configuration Wizard in GUI mode

I work on a Java development team where each developer has a local WebLogic 10.3.2 server for Windows x86 installed. A small handful of these developers are unable to run the Domain Configuration Wizard (i.e. <WLS_HOME>\common\bin\config.cmd) in GUI mode. When they start it the splash screen will appear briefly and then disappear with nothing more to see. The majority of the developers have no problem with this. Where should I start looking to identify the possible causes for this problem?

I will suggest following:
1) instead of clicking on config.cmd in windows browser; run config.cmd at command prompt. You can see error there
2) check version of java, and if it is certified.
3) as an alternate you can start the installer in console mode using 'config.cmd -mode=console'

Domain Configuration

Hi,
I have the tuxedo client application in a HP machine and the Server application
in a SUN machine. I have been given a task to do the DOMAIN configuration between
both the machines, So I started of with the sample simpapp application and I got
the following error in the ULOGS of the client and the server side.
Client side
=======
175907.deuxvi3m!GWTDOMAIN.22325: LIBGWT_CAT:1008: ERROR: Unable to connect to
remote domain (domainid=<222222>)
Server Side
=======
175907.deuxviuj!GWTDOMAIN.28805.1.0: LIBGWT_CAT:1547: ERROR: Use -t server option
to interoperate with sites older than 7.1
175907.deuxviuj!GWTDOMAIN.28805.1.0: LIBGWT_CAT:1506: ERROR: Error occurred during
security negotiation - closing connection
175907.deuxviuj!GWTDOMAIN.28805.1.0: LIBGWT_CAT:1008: ERROR: Unable to connect
to remote domain (domainid=<111111>)
175907.deuxviuj!GWTDOMAIN.28805.1.0: LIBGWT_CAT:1049: ERROR: Unrecoverable error
occurred - deleting action
I couldnt find any problem with the domain configuration files. I tried changing
different port numbers still the same problem and as well I am able to ping from
both the machines the other machine.
What else could be the problem ??
Will be very thankful if somebody responds immly as the schedules are slipped
already.
Thanks in advance
Thanks and Regards,
Maria

Hi,
Thanks a lot.
You are bang on target.
The problem was the version compatability issue. One m/c was running V 8.0 and
the other was running V 7.1. After giving the -t option and specifying the machine
types it was through
Once again thanks alot .
Regards,
Maria
Scott Orshan <[email protected]> wrote:
If you are running mixed releases, make sure that you use -t, as the
message tells
you to.
Otherwise, make sure that you set MTYPE to different values for the HP
and Sun
machines.
Since you say that this is a fairly critical, time sensitive issue, I
recommend
that you contact Support, so that they can look at your configuration
and help you
get going.
Scott Orshan
Maria wrote:
Hi,
I have the tuxedo client application in a HP machine and the Serverapplication
in a SUN machine. I have been given a task to do the DOMAIN configurationbetween
both the machines, So I started of with the sample simpapp applicationand I got
the following error in the ULOGS of the client and the server side.
Client side
=======
175907.deuxvi3m!GWTDOMAIN.22325: LIBGWT_CAT:1008: ERROR: Unable toconnect to
remote domain (domainid=<222222>)
Server Side
=======
175907.deuxviuj!GWTDOMAIN.28805.1.0: LIBGWT_CAT:1547: ERROR: Use -tserver option
to interoperate with sites older than 7.1
175907.deuxviuj!GWTDOMAIN.28805.1.0: LIBGWT_CAT:1506: ERROR: Erroroccurred during
security negotiation - closing connection
175907.deuxviuj!GWTDOMAIN.28805.1.0: LIBGWT_CAT:1008: ERROR: Unableto connect
to remote domain (domainid=<111111>)
175907.deuxviuj!GWTDOMAIN.28805.1.0: LIBGWT_CAT:1049: ERROR: Unrecoverableerror
occurred - deleting action
I couldnt find any problem with the domain configuration files. I triedchanging
different port numbers still the same problem and as well I am ableto ping from
both the machines the other machine.
What else could be the problem ??
Will be very thankful if somebody responds immly as the schedules areslipped
already.
Thanks in advance
Thanks and Regards,
Maria

OSB 11g Domain Configuration.

Hello,
I am having trouble understanding the results of the OSB 11g domain configuration. In creating the domain i have selected the following options:
Oracle Service Bus OWSM Extension
Oracle Service Bus Extension - All domain topologies
Weblogic Advanced Web Services for JAX-RPC Extension
Oracle WSM Policy Manager
Oracle JRF
I have selected the 'all domain topologies' as i wish to end up with an 'AdminServer' (using port 7001) and 'osb_server1' (using port 8011). Everything installs without a problem, its that i just don't understand the outcome. The OSB transport providers and adpaters (FTP, File, Db, AQ, etc) are targeted at both the admin server and the osb managed server. I also notice that the osb console is targeted only at the admin server. The confusion comes from the fact that when i use the OSB console application to create a project which i then test (successfully) it appears to all be deployed and running on the admin server? This is based on the fact that the URL used to invoke the OSB proxy service has to specify the port of the admin server. I would have thought that the url to access the proxy service would have been directed at the managed server?
Can someone confirm / explain to me what is going on or why it works this way, please?

The OSB transport providers and adpaters (FTP, File, Db, AQ, etc) are targeted at both the admin server and the osb managed server.Your observation is correct.
I also notice that the osb console is targeted only at the admin server.Yes. This is by design.
The confusion comes from the fact that when i use the OSB console application to create a project which i then test (successfully) it appears to all be deployed and running on the admin server?No. This cannot happen. When you activate the configuration, OSB deploys configuration to the managed server.
This is based on the fact that the URL used to invoke the OSB proxy service has to specify the port of the admin server. I would have thought that the url to access the proxy service would have been directed at the managed server?Are you test console?
Manoj
Edited by: Manoj Neelapu on May 24, 2010 9:28 AM

Using content mgmt in app built by domain configurator

I'm trying to get the content management piece to work using the portal app that
is built when the domain configurator is used. I have a portal application that
is working, but if I try to use the <pz:contentQuery id="docs" contentHome="<=ContentHelper.DEF_DOCUMENT_MANAGER_HOME%>"
query="<%=sQuery%>" /> tag it does not work (there is an "Exception raised while
creating Advisor".
I looked at the console and I get the following error when viewing the EJB Descriptor
for document: Error getting attribute on MBean

Worked like a charm - thank you!
"Peter Laird" <[email protected]> wrote:
>
Heidi,
Look at http://edocs/wlp/docs70/relnotes/relnotes.htm#292355 and look
at the info
for CR079828. I think this will explain your problem and the workaround.
PJL
"Heidi Wagner" <[email protected]> wrote:
I'm trying to get the content management piece to work using the portal
app that
is built when the domain configurator is used. I have a portal application
that
is working, but if I try to use the <pz:contentQuery id="docs" contentHome="<=ContentHelper.DEF_DOCUMENT_MANAGER_HOME%>"
query="<%=sQuery%>" /> tag it does not work (there is an "Exceptionraised
while
creating Advisor".
I looked at the console and I get the following error when viewing the
EJB Descriptor
for document: Error getting attribute on MBean

Multiple domain configurations

Hi,
We have about 140 interfaces to be run in 11g Fusion environment(s) handling moderate volume of data and another set of interfaces which will run high volume (several millions per hours) data. I am wondering what kind of domain configurations will be best. Right now we have a two node cluster running a single weblogic domain which has about 70 interfaces(moderate volume), the managed servers are SOA server, BAM server and WSM server.
I am thinking about two other domains which will have the same set of managed servers, one for the second set of 70 interfaces (moderate volume) and another one for the high volume transactions. The domains will be on a single installation of SOA suite. Can you please let me know from your experience what are other choices I have which will be better than this configuration. For example a totally separate installation in a different machines(or the same machines). Same domain, but adding more memory/database resources. etc.
Thanks.

Hi Venura,
You can do this in Project Properties. On the Profiles page, click New... to create a new profile. You can change many of the runtime settings associated with the project for each individual profile.
Thanks,
Brian
JDev Team

JRockit JVM Freezes on server start and WLST domain configuration

Hi,
Here is our configuration:
OS:
cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.3 (Tikanga)
uname -a
Linux ********* 2.6.18-128.el5 #1 SMP Wed Dec 17 11:41:38 EST 2008 x86_64 x86_64 x86_64 GNU/Linux
rpm -qa | grep glibc
glibc-2.5-34
glibc-common-2.5-34
glibc-2.5-34
We are using WLS 10.3 with 64 bit OS and 64 bit JRockit JVM on Xeon system.
The JVM freezes for about 10m when I am trying to start the server. I also see the same behavior when I am trying to create the domain using WLST. Here is the thread dump during the freeze. The JVM eventually recovers from this and continues processing. During domain configuration, the freeze happens when it is trying to write the domain files to disk. All writes are happening to local disk.
===== FULL THREAD DUMP ===============
Mon Apr 20 18:37:41 2009
BEA JRockit(R) R27.6.0-50_o-100423-1.6.0_05-20080626-2104-linux-x86_64
"Main Thread" id=1 idx=0x4 tid=30539 prio=5 alive, in native
at jrockit/io/FileNativeIO.readBytesPinned(Ljava/io/FileDescriptor;[BII)I(Native Method)
    at jrockit/io/FileNativeIO.readBytes(FileNativeIO.java:46)
    at java/io/FileInputStream.readBytes([BII)I(FileInputStream.java)
    at java/io/FileInputStream.read(FileInputStream.java:199)
    at sun/security/provider/NativePRNG$RandomIO.readFully(NativePRNG.java:185)
    at sun/security/provider/NativePRNG$RandomIO.implGenerateSeed(NativePRNG.java:202)
    ^-- Holding lock: java/lang/Object@0x8577948[biased lock]
at sun/security/provider/NativePRNG$RandomIO.access$300(NativePRNG.java:108)
at sun/security/provider/NativePRNG.engineGenerateSeed(NativePRNG.java:102)
at java/security/SecureRandom.generateSeed(SecureRandom.java:495)
at com/bea/security/utils/random/AbstractRandomData.ensureInittedAndSeeded(AbstractRandomData.java:83)
^-- Holding lock: com/bea/security/utils/random/SecureRandomData@0x95f5db0[recursive]
at com/bea/security/utils/random/AbstractRandomData.getRandomBytes(AbstractRandomData.java:97)
^-- Holding lock: com/bea/security/utils/random/SecureRandomData@0x95f5db0[biased lock]
at com/bea/security/utils/random/AbstractRandomData.getRandomBytes(AbstractRandomData.java:92)
at weblogic/security/Salt.getRandomBytes(Salt.java:18)
at weblogic/security/internal/encryption/JSafeSecretKeyEncryptor.decryptSecretKey(JSafeSecretKeyEncryptor.java:108)
at weblogic/security/internal/encryption/JSafeEncryptionServiceImpl.<init>(JSafeEncryptionServiceImpl.java:206)
at weblogic/security/internal/encryption/JSafeEncryptionServiceFactory.getEncryptionService(JSafeEncryptionServiceFactory.java:23)
at weblogic/security/internal/SerializedSystemIni.getEncryptionService(SerializedSystemIni.java:214)
at weblogic/security/internal/SerializedSystemIni.getExistingEncryptionService(SerializedSystemIni.java:240)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
at jrockit/vm/Reflect.invokeMethod(Ljava/lang/Object;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;(Native Method)
    at sun/reflect/NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;(Native Method)
    at sun/reflect/NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun/reflect/DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java/lang/reflect/Method.invoke(Method.java:597)
    at weblogic/descriptor/DescriptorManager$SecurityServiceImpl$SecurityProxy.<init>(DescriptorManager.java:149)
    at weblogic/descriptor/DescriptorManager$SecurityServiceImpl$SecurityProxy.instance(DescriptorManager.java:137)
    at weblogic/descriptor/DescriptorManager$SecurityServiceImpl.isEncrypted(DescriptorManager.java:108)
    at weblogic/descriptor/internal/AbstractDescriptorBean._isEncrypted(AbstractDescriptorBean.java:968)
    at weblogic/management/configuration/SecurityConfigurationMBeanImpl.setCredentialEncrypted(SecurityConfigurationMBeanImpl.java:1557)
    at weblogic/management/configuration/SecurityConfigurationMBeanImpl.setCredentialEncryptedAsString(SecurityConfigurationMBeanImpl.java:781)
    at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
    at jrockit/vm/Reflect.invokeMethod(Ljava/lang/Object;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;(Native Method)
    at sun/reflect/NativeMethodAccessorImpl.invoke0(Ljava/lang/reflect/Method;Ljava/lang/Object;[Ljava/lang/Object;)Ljava/lang/Object;(Native Method)
    at sun/reflect/NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun/reflect/DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java/lang/reflect/Method.invoke(Method.java:597)
    at com/bea/staxb/runtime/internal/util/ReflectionUtils.invokeMethod(ReflectionUtils.java:48)
    at com/bea/staxb/runtime/internal/RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:531)
    at com/bea/staxb/runtime/internal/MultiIntermediary.setValue(MultiIntermediary.java:80)
    at com/bea/staxb/runtime/internal/ByNameRuntimeBindingType$ElementQNameProperty.fill(ByNameRuntimeBindingType.java:348)
    at com/bea/staxb/runtime/internal/LiteralUnmarshalResult.extractAndFillElementProp(LiteralUnmarshalResult.java:139)
    at com/bea/staxb/runtime/internal/ByNameUnmarshaller.deserializeContents(ByNameUnmarshaller.java:51)
    at com/bea/staxb/runtime/internal/AttributeUnmarshaller.unmarshalIntoIntermediary(AttributeUnmarshaller.java:47)
    at com/bea/staxb/runtime/internal/LiteralUnmarshalResult.unmarshalElementProperty(LiteralUnmarshalResult.java:164)
    at com/bea/staxb/runtime/internal/LiteralUnmarshalResult.extractAndFillElementProp(LiteralUnmarshalResult.java:136)
    at com/bea/staxb/runtime/internal/ByNameUnmarshaller.deserializeContents(ByNameUnmarshaller.java:51)
    at com/bea/staxb/runtime/internal/AttributeUnmarshaller.unmarshalIntoIntermediary(AttributeUnmarshaller.java:47)
    at com/bea/staxb/runtime/internal/UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:189)
    at com/bea/staxb/runtime/internal/UnmarshalResult.unmarshalDocument(UnmarshalResult.java:159)
    at com/bea/staxb/runtime/internal/UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
    at weblogic/descriptor/internal/MarshallerFactory$1.createDescriptor(MarshallerFactory.java:95)
    at weblogic/descriptor/BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:240)
    at weblogic/management/provider/internal/DescriptorManagerHelper.loadDescriptor(DescriptorManagerHelper.java:63)
    at weblogic/management/provider/internal/RuntimeAccessImpl$IOHelperImpl.parseXML(RuntimeAccessImpl.java:683)
    at weblogic/management/provider/internal/RuntimeAccessImpl.parseNewStyleConfig(RuntimeAccessImpl.java:268)
    at weblogic/management/provider/internal/RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:115)
    at weblogic/management/provider/internal/RuntimeAccessService.start(RuntimeAccessService.java:39)
    at weblogic/t3/srvr/ServerServicesManager.startService(ServerServicesManager.java:459)
    at weblogic/t3/srvr/ServerServicesManager.startInStandbyState(ServerServicesManager.java:164)
    ^-- Holding lock: java/lang/Class@0x939df30[biased lock]
at weblogic/t3/srvr/T3Srvr.initializeStandby(T3Srvr.java:711)
at weblogic/t3/srvr/T3Srvr.startup(T3Srvr.java:482)
at weblogic/t3/srvr/T3Srvr.run(T3Srvr.java:440)
at weblogic/Server.main(Server.java:67)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
<<Truncated for brevity>>
===== END OF THREAD DUMP ===============
The same process works fine on a VM with the same OS. Any ideas what might be going on?
Thanks,
Chengi

This does not look familiar to me. Download R27.6.3 and see if that works things out: http://www.oracle.com/technology/software/products/jrockit/index.html. If that does not help, I recommend you to report the issue to JRockit support (see how to below).
Best Regards,
Tuva
JRockit PM
How to report to JRockit support:
You must register and file the issue on Metalink, http://metalink.oracle.com. Note that you must have purchased support to continue.
If you have problems during the registration or filing you can call our support +1.800.223.1711* or 1-800-633-0738 directly.
In case you have not purchased support call 1.800.833.3536* for support sales.
More information on our support site: http://www.oracle.com/support/index.html.
*) US numbers - for global technical support contacts see: http://www.oracle.com/support/contact.html

Create IDM Domain(OID Domain) Problem -- Bootstrap Domain Configuration. Library not found

Hi Expert
I have installed Weblogic 10.3.5 (64 bit) in my Oracle Linux 5 (x86_64 bit), I already installed JDK 6 (64 bit) lasted release.
Next, I install IDM 11.1.1.2.0 (64 bit), was successful, after that patchset 11.1.1.5.0 (64 bit) was installed without any error.
When I use IDM Configuration (ORACLE_HOME/bin/config.sh) to create a new domain for idm, It stuck in "Start Managed Server" phrase.
In install log I found entries as below, am I missing something?
Thank you,
Noraset
[2013-09-24T08:45:11.224+07:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.presentation] [tid: 11] [ecid: 0000K5DckoCFw00Fzzx0g01IGEtE000002,0] STARTING CONFIG OPERATION ...
[2013-09-24T08:45:11.233+07:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.statistics] [tid: 11] [ecid: 0000K5DckoCFw00Fzzx0g01IGEtE000002,0] Install Adapter: Mark Start for:CONFIG
[2013-09-24T08:45:11.646+07:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 12] [ecid: 0000K5Dd3vUFw00Fzzx0g01IGEtE000003,0] [Action]: Bootstrap Domain Configuration. Library not found: /u01/Oracle/Middleware/modules/com.bea.core.weblogic.security.identity_1.1.2.0.jar
[2013-09-24T08:45:11.646+07:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 12] [ecid: 0000K5Dd3vUFw00Fzzx0g01IGEtE000003,0] [Action]: Bootstrap Domain Configuration. Library not found: /u01/Oracle/Middleware/patch_wls1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar
[2013-09-24T08:45:11.646+07:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 12] [ecid: 0000K5Dd3vUFw00Fzzx0g01IGEtE000003,0] [Action]: Bootstrap Domain Configuration. Library not found: /u01/Oracle/Middleware/jrockit_160_14_R27.6.4-18/lib/tools.jar
[2013-09-24T08:45:11.666+07:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 12] [ecid: 0000K5Dd3vUFw00Fzzx0g01IGEtE000003,0] [Action]: Bootstrap Domain Configuration. Library not found: /u01/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar
[2013-09-24T08:45:11.666+07:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 12] [ecid: 0000K5Dd3vUFw00Fzzx0g01IGEtE000003,0] [Action]: Bootstrap Domain Configuration. Library not found: /u01/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.2.0.jar
[2013-09-24T08:45:11.666+07:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 12] [ecid: 0000K5Dd3vUFw00Fzzx0g01IGEtE000003,0] [Action]: Bootstrap Domain Configuration. Library not found: /u01/Oracle/Middleware/modules/org.apache.ant_1.7.0/lib/ant-all.jar
[2013-09-24T08:45:11.666+07:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 12] [ecid: 0000K5Dd3vUFw00Fzzx0g01IGEtE000003,0] [Action]: Bootstrap Domain Configuration. Library not found: /u01/Oracle/Middleware/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar
[2013-09-24T08:45:11.666+07:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 12] [ecid: 0000K5Dd3vUFw00Fzzx0g01IGEtE000003,0] [Action]: Bootstrap Domain Configuration. Library not found: /u01/Oracle/Middleware/wlserver_10.3/common/eval/pointbase/lib/pbembedded57.jar
[2013-09-24T08:45:11.666+07:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 12] [ecid: 0000K5Dd3vUFw00Fzzx0g01IGEtE000003,0] [Action]: Bootstrap Domain Configuration. Library not found: /u01/Oracle/Middleware/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar
[2013-09-24T08:45:11.666+07:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 12] [ecid: 0000K5Dd3vUFw00Fzzx0g01IGEtE000003,0] [Action]: Bootstrap Domain Configuration. Library not found: /u01/Oracle/Middleware/wlserver_10.3/common/eval/pointbase/lib/pbtools57.jar
[2013-09-24T08:45:11.676+07:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 12] [ecid: 0000K5Dd3vUFw00Fzzx0g01IGEtE000003,0] [Action]: Bootstrap Domain Configuration. Library not found: /u01/Oracle/Middleware/modules/org.apache.ant_1.7.0/lib/ant-all.jar
[2013-09-24T08:45:11.688+07:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 12] [ecid: 0000K5Dd3vUFw00Fzzx0g01IGEtE000003,0] [Action]: Bootstrap Domain Configuration. Library not found: /u01/Oracle/Middleware/modules/org.apache.ant_1.7.0/lib/ant.jar
[2013-09-24T08:45:11.689+07:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 12] [ecid: 0000K5Dd3vUFw00Fzzx0g01IGEtE000003,0] [Action]: Bootstrap Domain Configuration. Library not found: /u01/Oracle/Middleware/modules/org.apache.ant_1.7.0/lib/ant-launcher.jar
[2013-09-24T08:45:11.689+07:00] [as] [WARNING] [] [oracle.as.install.engine.modules.configuration.client.ConfigActionClassLoader] [tid: 12] [ecid: 0000K5Dd3vUFw00Fzzx0g01IGEtE000003,0] [Action]: Bootstrap Domain Configuration. Library not found: /u01/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.1.0.jar
[2013-09-24T08:45:11.760+07:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 12] [ecid: 0000K5Dd3vUFw00Fzzx0g01IGEtE000003,0] Setting data for action:Bootstrap Domain Configuration
[2013-09-24T08:45:11.768+07:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 12] [ecid: 0000K5Dd3vUFw00Fzzx0g01IGEtE000003,0] No data for action:Bootstrap Domain Configuration

Do you mean that I should create new domain without OID instance, and next use ORACLE_HOME/bin/config.sh to create new OID instance with existing domain ?
Thanks you,
Noraset

After new weblogic domain configuration with oim 11g, not able to login

After new weblogic domain configuration with oim 11g, not able to login for the frist time as xelsysadm.
it says invalid sign in. and in logs it says password is invalid.
Please help me in asap...

Thanks Pallavi for the effort. I tried commenting out, its still the same. It do not throw exception this time. However, It tells me that the recon event is completed and linked to user. When I go to user's profile, I dont see the resource provisioned.
Also,
The Account ID in recon manager of Web Console and the Account ID that is stored in the tables, doesn't match.
I wrote a custom code to fetch account and user details and here is the output,
User Key : 13 -- has Login Id : USER_CS
Account with account key : 49 is with user key : [USER_CS]
Getting Account Data......
{UD_TEST_1P_EMPLOYEENUMBER=1567, UD_TEST_1P_NAME=Kim1}
However the Account Id in recon manager is : 91
This seems fine.
Doesn't this mean, the account is reconciled successfully?
The problem is that, I am not able to see this resource in User's resource profile.
Edited by: Shashi kiran on Apr 18, 2013 3:56 PM

Configuration Question on local-scheme and high-units

I run my Tangosol cluster with 12 nodes on 3 machines(each machine with 4 cache server nodes). I have 2 important configuration questions. Appreciate if you can answer them ASAP.
- My requirement is that I need only 10000 objects to be in cluster so that the resources can be freed upon when other caches are loaded. I configured the <high-units> to be 10000 but I am not sure if this is per node or for the whole cluster. I see that the total number of objects in the cluster goes till 15800 objects even when I configured for the 10K as high-units (there is some free memory on servers in this case). Can you please explain this?
- Is there an easy way to know the memory stats of the cluster? The memory command on the cluster doesn't seem to be giving me the correct stats. Is there any other utility that I can use?
I started all the nodes with the same configuration as below. Can you please answer the above questions ASAP?
<distributed-scheme>
<scheme-name>TestScheme</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
<local-scheme>
<high-units>10000</high-units>
<eviction-policy>LRU</eviction-policy>
<expiry-delay>1d</expiry-delay>
<flush-delay>1h</flush-delay>
</local-scheme>
</backing-map-scheme>
</distributed-scheme>
Thanks
Ravi

I run my Tangosol cluster with 12 nodes on 3
machines(each machine with 4 cache server nodes). I
have 2 important configuration questions. Appreciate
if you can answer them ASAP.
- My requirement is that I need only 10000 objects to
be in cluster so that the resources can be freed upon
when other caches are loaded. I configured the
<high-units> to be 10000 but I am not sure if this is
per node or for the whole cluster. I see that the
total number of objects in the cluster goes till
15800 objects even when I configured for the 10K as
high-units (there is some free memory on servers in
this case). Can you please explain this?
It is per backing map, which is practically per node in case of distributed caches.
- Is there an easy way to know the memory stats of
the cluster? The memory command on the cluster
doesn't seem to be giving me the correct stats. Is
there any other utility that I can use?
Yes, you can get this and quite a number of other information via JMX. Please check this wiki page for more information.
I started all the nodes with the same configuration
as below. Can you please answer the above questions
ASAP?
<distributed-scheme>
<scheme-name>TestScheme</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
<local-scheme>
<high-units>10000</high-units>
<eviction-policy>LRU</eviction-policy>
<expiry-delay>1d</expiry-delay>
<flush-delay>1h</flush-delay>
</local-scheme>
</backing-map-scheme>
</distributed-scheme>
Thanks
RaviBest regards,
Robert

OAM domain configuration: question

Similar Messages

Maybe you are looking for