.oam file of html5 video trigger code not working in Muse
I simply want to have a video play on page load. I have done the code for a trigger on one <div> to automatically play a video in Edge. The video plays perfectly in browser preview, even with transparency intact! Just the way I want it. The problem is when I insert .oam file in Muse it doesn't work. Other animations of simple objects and key frames work fine in Muse. But, I can make much more beautiful animations for certain elements in After Effects, with transparency and integrate them with elements in Muse. The video, its transparency and other objects work great from Edge to browser preview but not when .oam file is exported and placed into Muse. I know, I wouldn't build an entire site like this, I just want one or two animations to play automatically, with out controls (which I've been able to do), when the page is loaded.
I publish with business catalyst to a my own domain, with Creative Cloud.
Attached is a video where I'm at.
What is the code or method to get to work?
HI,
Ok. I know that mov is not supported in Firefox nor Chrome, now.
When I put the trigger in Edge to play the .mov file, it works when I preview from Edge to Safari, and not in any of the other browsers. This leads me to think that Safari supports .mov files, with and without transparency.
However, when I try to put the .oam file generated by Edge into Muse and run the page in Safari the video doesn't work. Is this a .mov support with Muse? Does the video need to be uploaded to the Adobe Business Catalyst server? Where I publish my site?
.mov and transparency aside, I can't get any video to play in any browser from the .oam file placed in Muse. Nothing plays in preview nor when I publish in Muse. I get the previews to work from Edge for the corresponding video for each browser. And yes, when controls in put in it says wether the video is supported or not. But I would want no controls and the video to play automatically on page load. Ideally I would like transparency. But I realize that's a browser support thing. I don't see why all browsers don't support all video types and WITH transparency. C'mon now it's almost 2014! Am I right or am I right? Ok, sorry.
I followed everything in this Tom Green video. Pretty sure all my code is correct.
http://layersmagazine.com/embedding-video-in-adobe-edge-animate.html
Picture shows code for working .ogv in Edge preview but not from .oam file in Muse in preview nor publish.
Not sure why it won't even show in preview from Muse. But thinking when I publish, the video must have to be local on the publish server right?
Am I missing something? Do I need to insert HTML into Muse, not the .oam?
Similar Messages
-
HTML5 video tag is not working in IE9
Hi
the bellow is the code
<video width="320" height="240" controls>
<source src="NewFolder/Wildlife.mp4.mp4" type="video/mp4">
<source src="NewFolder/movie.ogg" type="video/ogg">
Your browser does not support the video tag.
</video>This is the TechNet Forum for questions regarding Internet Explorer 8, 9, 10 for the IT Pro Audience. Topics covered are: Installation, Deployment, Configuration, Security, Group Policy, Management questions.
For better assistance please ask for help in the MSDN IE Development Forums.
Thanks & Regards,
Vincenzo Di Russo
Microsoft® MVP Windows Internet Explorer, Windows & Security Expert - since 2003.
Moderator in the Microsoft Community and TechNet Forums
My MVP Profile -
HTML5 videos on IE9 not working
Hi guys!
Looking forward to answering this question asap:)
I have many projects using Captivate 6 and Publishing them in HTML5 format with no Preloader, no scorm, and "Scalable HTML content check under Options.
This is what I get when I view it through IE9. When i hit play nothing happens
Help! What do I do?Hi,
Could you hit the play button on the center of the slide.
By default the HTML5 course is not set to go with AutoPlay.
Is you LMS where you have uploaded SCORM Complaint?
Can you uplaode the same package to http://cloud.scorm.com and compare the results
Thanks.
Anjaneai -
Installed Premiere Pro CS4 but video display does not work?
I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
RonI would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2 -
Video Filter does not work.
Hello.
I have been using Final Cut Pro 4 for a while and it worked fine before. But recently, any function of Video Filter does not work. I apply them to the clip, but the image does not show any changes on Canvas.
Is the software's problem?
Thanks in advance.
YingFor a reason unknown to me, FCP's preference files (there's 3 of them) will sometimes become corrupted and need to be trashed. Usually the symptoms are things just not working as they did earlier, or weird issues like the 3 Way Color Corrector looks different than before ... stuff like that.
FCP Rescue is a freeware app (yes, you'll need to download it) that will create a backup set of preferences, thereby retaining all of your settings. Then when (not IF, but when) FCP's preferences become corrupted, you can run FCP Rescue to replace the bad set with a fresh new set.
Otherwise you can delete the files yourself (make sure FCP isn't open at the time) and the next time you launch FCP, it will revert back to the factory settings.
-DH -
When-mouse-click trigger is not working
Hi,
My forms version is 10g.
I've a black level and item level when-mouse-click trigger.
There is some code inside that which is not being executed.
To test, i simply printed a hello message inside the trigger's code.
Even hello is not being displayed.
Can anyone please help me in why this trigger is not working.
NavnitYou have some other issues going on if you don't see anything from a when-mouse-click trigger.
First of all, are you spelling the trigger using a dash or underscore? WHEN-MOUSE-CLICK will run, but WHEN_MOUSE_CLICK will not.
Have you set :SYSTEM.Message_Level to some value above zero in the form? If so, set it back to zero.
On what object are you trying to click? Is this causing navigation? Navigation may cause validation to run, which may fail, which may prevent the navigation, which may prevent your when-mouse-click from running.
And last, are you sure you are running the currently compiled fmx version of your form?
When nothing works, you need to back up and start finding out what DOES work first. -
Satellite 1800-100: video-out does not work
He,
I just installed windows XP on my old Satellite 1800-100, but now my video-out does not work anymore. So I just downloaded the latest driver, but there's no way I can get it installed. According to Windows the new driver isn't newer, so it won't let me update it. And when i try to unistall the display driver, I have to reboot before it takes effect, and wile rebooting it automaticly installs the standard driver again.
Can anybody help me?
Greets,
DaanHi
Do you mean TV- out port or monitor port? As far as I know this unit is preinstalled with WXP Home and all drivers can be also used for WXP Pro.
Did you preinstall your own OS (non recovery image)? -
I have a spare Mac Pro here so I decided to remove the video card and put it in the one I'm using. Both machines were purchased in '09 and use the same video card (ATI Radeon HD 2600). The two monitors I have hooked into the original video card work fine but the monitors I hooked into the newly placed video card are not working. Under the About This Mac specs >> PCI cards it shows up and says driver is installed. Is there anything special you need to do to get a second video card to work?
Thanks.I tried the SMC reset. I removed the card and reseated it. I'm seating it in slot 2 because that's the only other one that is x16. The other slots 3-4 are x4. Still nothing is showing up. When I go to System Preferences >> Displays >> Detect Dispalys nothing happens. The two displays plugged into the original video card work fine but the newly installed on does not show up. Here is what the Mac Info is detecting. Maybe this makes sense to someone. Not sure what MSI is referring to and the second video card is reading as "display" instead of "ATI Radeon HD 2600". Link speed on the second card is half that of the original.
About This Mac >> More Info >> PCI Cards >> Slot-1
ATI Radeon HD 2600:
Name: ATY,Lamna
Type: Display Controller
Driver Installed: Yes
MSI: Yes
Bus: PCI
Slot: Slot-1
Vendor ID: 0x1002
Device ID: 0x9588
Subsystem Vendor ID: 0x106b
Subsystem ID: 0x00a6
Revision ID: 0x0000
Link Width: x16
Link Speed: 5.0 GT/s
About This Mac >> More Info >> PCI Cards >> Slot-2
display:
Type: VGA-Compatible Controller
Driver Installed: Yes
MSI: No
Bus: PCI
Slot: Slot-2
Vendor ID: 0x10de
Device ID: 0x0393
Subsystem Vendor ID: 0x0000
Subsystem ID: 0x0400
Revision ID: 0x00a1
Link Width: x16
Link Speed: 2.5 GT/s -
Video tag is not working in firefox how can we remove this error
Video tag is not working in firefox. In this some kind of mmie type error Kindly remove this error .If you have any kind of solution,Please tell me how can it fix it?
Can you post a link to a publicly accessible page that doesn't require authentication (signing on) where you see such a not working video tag?
Do they work here?
*Firefox Videos: http://www.mozilla.com/firefox/video/
See also:
* https://developer.mozilla.org/en/Media_formats_supported_by_the_audio_and_video_elements -
DVI video out suddenly not working.
That's basically it. I have a 23-inch Cinema HD Display at home and at the the office. Suddenly the video out is not working with either of them. The displays control panel lists the external display, so the system is detecting the connected display.
There is nothing wrong with the displays. I connected an old PowerBook and they light up fine. With my MBP, the power light lights, but nothing is displayed on the Screen.there's a somewhat similar thread "external monitor stopped working" with no answers
my 17" Studio display works as 2nd mon on other computers
my dvi out does work with a vga monitor and adapter, of course :))
i'm using the dvi to adc adapter -- could this be involved somehow?
my laptop display goes blue when i plug in the external monitor as it should, but the 2nd monitor never wakes up, turns on, etc. -
Stereo video recording is not working after updating to ICS
hii am Dilu from India. I updated my xperia mini (ST15i) to ICS. After that stereo video recording is not working. Last week i found a new ICS update and i upadated to build .587 , now also the same problem exsists. Somebody please help
Solved!
Go to Solution.As I understand the the audio during video recording will be recorded in mono running on ICS.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
hhi guys
my video recording sounds not working at all but it's working for other things such as music. I've tried to clear my sound thing near the earphone hole but had no success can someone please help me out?Had an Iphone 4 for about 3 months now. This happened to the first one I had and they ended up having to replace it at the apple store just a couple weeks ago 6/2. It happened again last night to my new one. This time i was able to correct it by going to itunes, backing up the phone to icloud, and then restoring the software. Mine did not work with voice memo, but did work with headphones plugged in, and would also work on speaker. I could hear callers but they couldn't hear me. I had purchased a new case (lifeproof case at $79.99) because it comes with plugs that cover the headphone jack, and the charging port, and is also waterproof. I heard that the root cause is due to lint, dirt, etc getting inside the headphone jack. Well, must be something else. It's a 10 days old phone, and has been in this overpriced case the whole time, and I have not used the headphones. I hope this doesn't keep happening.
-
Partial Trigger is not working with Panel Group Layout using ADF 11g.
Friends,
I have a requirment , Based on the <af:selectBooleanCheckbox> value I have to render <af:panelGroupLayout> dynamically. If the check box is checked then I have to display panel group layout otherwise not. The problem what I am facing here is Partial Trigger is not working, If I Un check the boolean box and refresh the page then I see it is working. If I don't refresh the page I am not seeing this is working as expected.
Below is the snippet
<af:selectBooleanCheckbox value="#{bindings.ChkBoolean.inputValue}"
shortDesc="#{bindings.OtherOptChk.hints.tooltip}"
id="OtherOpt" immediate="true" autoSubmit="true"
/>
<af:panelGroupLayout id="pgl11" partialTriggers="ChkBoolean"
rendered="#{bindings.ChkBoolean.inputValue}"">
Am I doing anything wrong here
Thanks in AdvanceHi,
I started to document common pitfalls like this. The problem has been reported last month too and is documented in here: http://www.oracle.com/technetwork/developer-tools/adf/learnmore/oct2010-otn-harvest-183714.pdf
Frank -
My Video chat is not working with messages.
When someone tries to send me an invite for a video chat the green light shows up but I do not receive and invitation window to accept it.
I am using an aim account on messages and my server settings are api.oscar.aol.com, port 443, and use SSL is checked.
In connection doctor is says my router type is port restricted and that "This computer's network setup includes one or more devices that are not fully compatible with audio and video chatting. I am not sure if this is the reason my video chat is not working.
If anyone can help me please let me know.Hi,
Most routers can be accessed via Web Browser.
The IP shown in System Preferences > Network > Advanced Button > TCP/IP tab in the "Router IP" box is generally the one to use.
You also tend to need a User ID and Password.
Apple Base Stations are different in that they have an App in the Utilities folder that accesses the set up screens.
Your router can have different methods of opening the ports.
Port Forwarding
This tends to be the oldest of the methods.
Essentially you point a port to an IP (computer) to allow it.
A collection of ports may need to be entered one by one.
Once set up, only that computer can use those ports.
Port Triggering
This cuts down the number of ports set to be Open as it involves "listening" ports that then open further ports
iChat/Messages needs some ports to be open all the time and you set these a bit like Port Forwarding but with listing the IP to send the data to.
The A/V side can have a listening port (port 5678 for the Visible part of the Invite)
The advantage is that multiple computers can use the same ports.
DMZ (Demilitarised Zone)
This is an ON or Off setting (Enable/Disable)
It opens all the port (65535 of them) to one IP (i.e only one computer can use this.)
It is sort of like Port Forwarding Extreme
UPnP (Universal Plug 'n' Play)
A setting that allows the App to tell the router which ports to open.
This means the router can carry on doing DHCP and multiple computer can use the ports involved.
Where these setting are varies at least as much as there are manufacturers.
This is Linksys Port Forwarding (the arrows above the pic show the Others (it does not show DMZ)
7:47 PM Thursday; September 27, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and and iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Laoding files into layers from bridge does not work
Using photoshop ver 14.2.1x64 and bridge on a PC.. While in Bridge, I selected 2 pictures, selected tools, photoshop and load files into layers. It does not work. any ideas of how to make it work
You get 5 gold stars, I also have cc2014 and it works, thank you.
On Wed, Oct 29, 2014 at 4:56 PM, Warunicorn <[email protected]>
Maybe you are looking for
-
Cross Reference within external Database using XREF API
Hi Experts, Can we do Cross Reference within external Database using XREF API uses JDBC to access the Oracle Database Stored Procedures in SAP PI? How to use a JNDI Data source to access the DB and how to do the Connection Pooling will be done by
-
How to enforce valid member combinations in Planning?
Hi, Is it possible to enforce which combinations of members are valid in a Planning application? In Planning, each data cell represents the intersection of a member from each dimension. However, it is likely that not every combination of members is v
-
ITunes and ROKR mobile phone - found a way of making it all work !fixed!
I struggled for two evenings trying to get my daughters Christmas present working. iTunes and the Motorola ROKR phone would not exchange music files. What I quickly realised is that iTunes on the Motorola does not work as if it were a Window applicat
-
How to check ..the user who is currently logged in ..
... suppose i m logged in as HR schema ...so while using SLLplus * environment ...how to check ...that which use is currently logged in..
-
Ready to buy mini - but don't want obsolete product
Here is a problem I see more and more with Apple. I am a longtime user (since 1984). It used to be you'd buy a machine and know it would be a stable product for three or four years. No big changes. Twice in the last two years I have made major invest