OAM Identity Server user search is very slow after upgrading to 10.1.4.2
We recently upgraded Identity-Server from 7.0.4 to 10.1.4.2 + BP10. The new webpass (version 10.1.4.2) is on iPlanet webserver, which does not have any bundled patch available. After this upgrade, we found the user search is very slow. It is taking double the time compare to version 7.0.4. The search performance for NetPoint admin users is fine.
The new version is connecting to the same LDAP (Sun 5.2) as the old one. The 7.0.4 version was well tuned (like Ldap connections, caching, etc) for the performance. The migration suppose to carryover those performance configuration to the new version. Is there any new parameter (related to performance) I should look for in version 10 ? Anybody have faced these issues after migration and found a fix for it ?
Thanks!
Kabi
More in this thread - Re: OAM- "You do not have sufficient access rights" message with Master Adm
-Vinod
Similar Messages
-
IPhone 4 8GB white working very slow after upgrading to IOS7
Phone 4 8GB white working very slow after upgrading to IOS7
When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Mac is very slow after upgrading to 10.8.3
my mac with 2.4 ghz i5 and 4gb RAm is very slow after upgrading to OS X 10.8.3
any suggestions would be appreciated...More in this thread - Re: OAM- "You do not have sufficient access rights" message with Master Adm
-Vinod -
My Arch is very slow after upgrading to kernel 3.0
Hi men! This is my first post on this forum, i'm italian and i'm using archlinux since 4 months (sorry if my english is bad)... I would like you to help me to solve a problem: as i wrote in object my system has became very slow after upgrading to kernel 3.0: system booting, applications launch, general responses of my tasks....what's the problem? How can i resolve it? Thanks!!
However the kernel26-lts looks slower than 3.0 so i returned to the last one...iìm going to see dmesg outputs...i've to remove "quiet" from the grub.cfg
EDIT: I've checked but no error is shown....this is dmesg.log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Tue Aug 16 08:44:20 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/ea679d77-65a5-4cc3-b46e-286b953789f7 resume=/dev/sda9 ro vga=0x3f0 nomodeset
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dee74000 (usable)
[ 0.000000] BIOS-e820: 00000000dee74000 - 00000000deebc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000deebc000 - 00000000deecd000 (reserved)
[ 0.000000] BIOS-e820: 00000000deecd000 - 00000000deedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000deedf000 - 00000000deee0000 (reserved)
[ 0.000000] BIOS-e820: 00000000deee0000 - 00000000deee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000deee3000 - 00000000def11000 (reserved)
[ 0.000000] BIOS-e820: 00000000def11000 - 00000000def12000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000def12000 - 00000000def15000 (reserved)
[ 0.000000] BIOS-e820: 00000000def15000 - 00000000def17000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000def17000 - 00000000def1b000 (reserved)
[ 0.000000] BIOS-e820: 00000000def1b000 - 00000000def1e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000def1e000 - 00000000def22000 (reserved)
[ 0.000000] BIOS-e820: 00000000def22000 - 00000000def31000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000def31000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000118000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: Sony Corporation VPCEC1M1E/VAIO, BIOS R0300Y8 07/20/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x118000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 118000000 mask FF8000000 uncachable
[ 0.000000] 5 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdee74 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fc980] fc980
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dee74000
[ 0.000000] 0000000000 - 00dee00000 page 2M
[ 0.000000] 00dee00000 - 00dee74000 page 4k
[ 0.000000] kernel direct mapping tables up to dee74000 @ dee6e000-dee74000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000118000000
[ 0.000000] 0100000000 - 0118000000 page 2M
[ 0.000000] kernel direct mapping tables up to 118000000 @ 117ffa000-118000000
[ 0.000000] RAMDISK: 37c76000 - 37e33000
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 Sony)
[ 0.000000] ACPI: XSDT 00000000def1ce18 0005C (v01 Sony VAIO 20100720 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000def15d98 000F4 (v04 Sony VAIO 20100720 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110413/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDEF2DF40/0x00000000DEF30D40, using 32 (20110413/tbfadt-489)
[ 0.000000] ACPI: DSDT 00000000deecd018 0ADBB (v01 Sony VAIO 20100720 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000def2df40 00040
[ 0.000000] ACPI: APIC 00000000def1bf18 0008C (v02 Sony VAIO 20100720 MSFT 00010013)
[ 0.000000] ACPI: MCFG 00000000def2fd18 0003C (v01 Sony VAIO 20100720 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000def2fc98 00038 (v01 Sony VAIO 20100720 MSFT 00000003)
[ 0.000000] ACPI: SLIC 00000000def28a18 00176 (v01 Sony VAIO 20100720 Sony 01000000)
[ 0.000000] ACPI: SSDT 00000000def16018 009F1 (v01 Sony VAIO 20100720 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000def15c18 0014B (v01 Sony VAIO 20100720 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000118000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000118000000
[ 0.000000] NODE_DATA [0000000117ffb000 - 0000000117ffffff]
[ 0.000000] [ffffea0000000000-ffffea0003dfffff] PMD -> [ffff880113800000-ffff880116ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00118000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000dee74
[ 0.000000] 0: 0x00100000 -> 0x00118000
[ 0.000000] On node 0 totalpages: 1011202
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 894636 pages, LIFO batch:31
[ 0.000000] Normal zone: 1344 pages used for memmap
[ 0.000000] Normal zone: 96960 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dee74000 - 00000000deebc000
[ 0.000000] PM: Registered nosave memory: 00000000deebc000 - 00000000deecd000
[ 0.000000] PM: Registered nosave memory: 00000000deecd000 - 00000000deedf000
[ 0.000000] PM: Registered nosave memory: 00000000deedf000 - 00000000deee0000
[ 0.000000] PM: Registered nosave memory: 00000000deee0000 - 00000000deee3000
[ 0.000000] PM: Registered nosave memory: 00000000deee3000 - 00000000def11000
[ 0.000000] PM: Registered nosave memory: 00000000def11000 - 00000000def12000
[ 0.000000] PM: Registered nosave memory: 00000000def12000 - 00000000def15000
[ 0.000000] PM: Registered nosave memory: 00000000def15000 - 00000000def17000
[ 0.000000] PM: Registered nosave memory: 00000000def17000 - 00000000def1b000
[ 0.000000] PM: Registered nosave memory: 00000000def1b000 - 00000000def1e000
[ 0.000000] PM: Registered nosave memory: 00000000def1e000 - 00000000def22000
[ 0.000000] PM: Registered nosave memory: 00000000def22000 - 00000000def31000
[ 0.000000] PM: Registered nosave memory: 00000000def31000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
[ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880117c00000 s78464 r8192 d23936 u262144
[ 0.000000] pcpu-alloc: s78464 r8192 d23936 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 995517
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/ea679d77-65a5-4cc3-b46e-286b953789f7 resume=/dev/sda9 ro vga=0x3f0 nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3909052k/4587520k available (4064k kernel code, 542712k absent, 135756k reserved, 3304k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 32505856 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] spurious 8259A interrupt: IRQ7.
[ 0.003333] Detected 2127.784 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4257.88 BogoMIPS (lpj=7092613)
[ 0.000008] pid_max: default: 32768 minimum: 301
[ 0.000120] Security Framework initialized
[ 0.000125] AppArmor: AppArmor disabled by boot time parameter
[ 0.000524] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001546] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001968] Mount-cache hash table entries: 256
[ 0.002354] Initializing cgroup subsys cpuacct
[ 0.002387] Initializing cgroup subsys memory
[ 0.002403] Initializing cgroup subsys devices
[ 0.002406] Initializing cgroup subsys freezer
[ 0.002408] Initializing cgroup subsys net_cls
[ 0.002410] Initializing cgroup subsys blkio
[ 0.002461] CPU: Physical Processor ID: 0
[ 0.002462] CPU: Processor Core ID: 0
[ 0.002468] mce: CPU supports 9 MCE banks
[ 0.002478] CPU0: Thermal monitoring handled by SMI
[ 0.002487] using mwait in idle threads.
[ 0.003640] ACPI: Core revision 20110413
[ 0.019108] ftrace: allocating 16144 entries in 64 pages
[ 0.025543] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.058531] CPU0: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz stepping 02
[ 0.163154] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.163161] ... version: 3
[ 0.163162] ... bit width: 48
[ 0.163164] ... generic registers: 4
[ 0.163165] ... value mask: 0000ffffffffffff
[ 0.163167] ... max period: 000000007fffffff
[ 0.163168] ... fixed-purpose events: 3
[ 0.163169] ... event mask: 000000070000000f
[ 0.183294] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.209823] Booting Node 0, Processors #1
[ 0.209829] smpboot cpu 1: start_ip = 99000
[ 0.303122] CPU1: Thermal monitoring handled by SMI
[ 0.323240] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.343129] #2
[ 0.343133] smpboot cpu 2: start_ip = 99000
[ 0.436405] CPU2: Thermal monitoring handled by SMI
[ 0.456532] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.476405] #3
[ 0.476409] smpboot cpu 3: start_ip = 99000
[ 0.569682] CPU3: Thermal monitoring handled by SMI
[ 0.589820] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.596326] Brought up 4 CPUs
[ 0.596331] Total of 4 processors activated (17030.31 BogoMIPS).
[ 0.598893] devtmpfs: initialized
[ 0.600028] PM: Registering ACPI NVS region at dee74000 (294912 bytes)
[ 0.600036] PM: Registering ACPI NVS region at deecd000 (73728 bytes)
[ 0.600039] PM: Registering ACPI NVS region at deee0000 (12288 bytes)
[ 0.600041] PM: Registering ACPI NVS region at def11000 (4096 bytes)
[ 0.600042] PM: Registering ACPI NVS region at def15000 (8192 bytes)
[ 0.600044] PM: Registering ACPI NVS region at def22000 (61440 bytes)
[ 0.600970] print_constraints: dummy:
[ 0.601050] NET: Registered protocol family 16
[ 0.601156] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.601159] ACPI: bus type pci registered
[ 0.601319] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.601322] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.613921] PCI: Using configuration type 1 for base access
[ 0.614412] bio: create slab <bio-0> at 0
[ 0.616187] ACPI: EC: Look up EC in DSDT
[ 0.626457] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.646350] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.646723] ACPI: SSDT 00000000def1ac18 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.647118] ACPI: Dynamic OEM Table Load:
[ 0.647121] ACPI: SSDT (null) 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.647269] ACPI: SSDT 00000000def18018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.647646] ACPI: Dynamic OEM Table Load:
[ 0.647648] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.666577] ACPI: SSDT 00000000def19a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.667016] ACPI: Dynamic OEM Table Load:
[ 0.667018] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.676431] ACPI: SSDT 00000000def17d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.676844] ACPI: Dynamic OEM Table Load:
[ 0.676846] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 1.089727] ACPI: Interpreter enabled
[ 1.089731] ACPI: (supports S0 S3 S4 S5)
[ 1.089754] ACPI: Using IOAPIC for interrupt routing
[ 1.120583] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.120814] ACPI: No dock devices found.
[ 1.120815] HEST: Table not found.
[ 1.120818] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.121147] \_SB_.PCI0:_OSC invalid UUID
[ 1.121149] _OSC request data:1 8 1f
[ 1.121153] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.121658] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.121661] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.121663] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.121666] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 1.121668] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 1.121670] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 1.121672] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 1.121675] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 1.121677] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 1.121679] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
[ 1.121692] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 1.121712] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 1.121730] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[ 1.121757] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.121761] pci 0000:00:01.0: PME# disabled
[ 1.121809] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 1.121841] pci 0000:00:16.0: reg 10: [mem 0xf5e0a000-0xf5e0a00f 64bit]
[ 1.121922] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.121927] pci 0000:00:16.0: PME# disabled
[ 1.121966] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 1.121992] pci 0000:00:1a.0: reg 10: [mem 0xf5e08000-0xf5e083ff]
[ 1.122083] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.122088] pci 0000:00:1a.0: PME# disabled
[ 1.122118] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 1.122140] pci 0000:00:1b.0: reg 10: [mem 0xf5e00000-0xf5e03fff 64bit]
[ 1.122219] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.122223] pci 0000:00:1b.0: PME# disabled
[ 1.122251] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 1.122332] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.122337] pci 0000:00:1c.0: PME# disabled
[ 1.122366] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[ 1.122446] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.122451] pci 0000:00:1c.1: PME# disabled
[ 1.122480] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[ 1.122560] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.122565] pci 0000:00:1c.2: PME# disabled
[ 1.122598] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
[ 1.122681] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.122686] pci 0000:00:1c.5: PME# disabled
[ 1.122723] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 1.122749] pci 0000:00:1d.0: reg 10: [mem 0xf5e07000-0xf5e073ff]
[ 1.122839] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.122844] pci 0000:00:1d.0: PME# disabled
[ 1.122869] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 1.122953] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[ 1.123075] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[ 1.123103] pci 0000:00:1f.2: reg 10: [io 0xe070-0xe077]
[ 1.123114] pci 0000:00:1f.2: reg 14: [io 0xe060-0xe063]
[ 1.123126] pci 0000:00:1f.2: reg 18: [io 0xe050-0xe057]
[ 1.123137] pci 0000:00:1f.2: reg 1c: [io 0xe040-0xe043]
[ 1.123149] pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
[ 1.123161] pci 0000:00:1f.2: reg 24: [mem 0xf5e06000-0xf5e067ff]
[ 1.123209] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.123214] pci 0000:00:1f.2: PME# disabled
[ 1.123237] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 1.123259] pci 0000:00:1f.3: reg 10: [mem 0xf5e05000-0xf5e050ff 64bit]
[ 1.123290] pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
[ 1.123360] pci 0000:01:00.0: [1002:68e0] type 0 class 0x000300
[ 1.123380] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.123394] pci 0000:01:00.0: reg 18: [mem 0xf0020000-0xf003ffff 64bit]
[ 1.123405] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
[ 1.123424] pci 0000:01:00.0: reg 30: [mem 0xf0000000-0xf001ffff pref]
[ 1.123443] pci 0000:01:00.0: supports D1 D2
[ 1.123468] pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403
[ 1.123487] pci 0000:01:00.1: reg 10: [mem 0xf0040000-0xf0043fff 64bit]
[ 1.123555] pci 0000:01:00.1: supports D1 D2
[ 1.123579] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.123582] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 1.123585] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf00fffff]
[ 1.123589] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.123667] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
[ 1.123693] pci 0000:02:00.0: reg 10: [mem 0xf4a00000-0xf4a0ffff 64bit]
[ 1.123783] pci 0000:02:00.0: supports D1
[ 1.123785] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 1.123790] pci 0000:02:00.0: PME# disabled
[ 1.123824] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.123829] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.123834] pci 0000:00:1c.0: bridge window [mem 0xf4a00000-0xf5dfffff]
[ 1.123842] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.123953] pci 0000:03:00.0: [1180:e822] type 0 class 0x000805
[ 1.123976] pci 0000:03:00.0: reg 10: [mem 0xf3602000-0xf36020ff]
[ 1.124115] pci 0000:03:00.0: supports D1 D2
[ 1.124117] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.124123] pci 0000:03:00.0: PME# disabled
[ 1.124175] pci 0000:03:00.1: [1180:e230] type 0 class 0x000880
[ 1.124198] pci 0000:03:00.1: reg 10: [mem 0xf3601000-0xf36010ff]
[ 1.124336] pci 0000:03:00.1: supports D1 D2
[ 1.124338] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.124344] pci 0000:03:00.1: PME# disabled
[ 1.124394] pci 0000:03:00.4: [1180:e822] type 0 class 0x000805
[ 1.124418] pci 0000:03:00.4: reg 10: [mem 0xf3600000-0xf36000ff]
[ 1.124554] pci 0000:03:00.4: supports D1 D2
[ 1.124556] pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.124562] pci 0000:03:00.4: PME# disabled
[ 1.124630] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.124635] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 1.124640] pci 0000:00:1c.1: bridge window [mem 0xf3600000-0xf49fffff]
[ 1.124648] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.124886] pci 0000:04:00.0: [11ab:4381] type 0 class 0x000200
[ 1.125105] pci 0000:04:00.0: reg 10: [mem 0xf2220000-0xf2223fff 64bit]
[ 1.125212] pci 0000:04:00.0: reg 18: [io 0xa000-0xa0ff]
[ 1.125642] pci 0000:04:00.0: reg 30: [mem 0xf2200000-0xf221ffff pref]
[ 1.125967] pci 0000:04:00.0: supports D1 D2
[ 1.125968] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.126008] pci 0000:04:00.0: PME# disabled
[ 1.126269] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 1.126274] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
[ 1.126279] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf35fffff]
[ 1.126287] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.126344] pci 0000:00:1c.5: PCI bridge to [bus 05-0c]
[ 1.126348] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
[ 1.126353] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf21fffff]
[ 1.126361] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.126438] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
[ 1.126443] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.126448] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.126456] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.126459] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.126461] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.126463] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.126466] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 1.126468] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 1.126470] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 1.126473] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 1.126475] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 1.126478] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 1.126480] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
[ 1.126515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.126656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.126708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 1.126765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.126833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 1.126882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 1.126997] \_SB_.PCI0:_OSC invalid UUID
[ 1.126998] _OSC request data:1 1f 1f
[ 1.127003] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.127035] \_SB_.PCI0:_OSC invalid UUID
[ 1.127037] _OSC request data:1 0 1d
[ 1.127041] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 1.127042] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.130982] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
[ 1.131046] pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600
[ 1.131066] pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600
[ 1.131087] pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600
[ 1.131107] pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600
[ 1.131125] pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600
[ 1.131143] pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600
[ 1.131176] pci0000:3f: Requesting ACPI _OSC control (0x1d)
[ 1.131179] pci0000:3f: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 1.131181] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.131415] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.131460] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.131503] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 7 10 12 14 15)
[ 1.131546] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 1.131588] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.131636] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.131679] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
[ 1.131722] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.131820] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.131826] vgaarb: loaded
[ 1.131827] vgaarb: bridge control possible 0000:01:00.0
[ 1.131900] PCI: Using ACPI for IRQ routing
[ 1.134142] PCI: pci_cache_line_size set to 64 bytes
[ 1.134246] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 1.134248] reserve RAM buffer: 00000000dee74000 - 00000000dfffffff
[ 1.134372] NetLabel: Initializing
[ 1.134374] NetLabel: domain hash size = 128
[ 1.134375] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.134389] NetLabel: unlabeled traffic allowed by default
[ 1.134412] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.134418] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.136441] Switching to clocksource hpet
[ 1.139456] Switched to NOHz mode on CPU #0
[ 1.139583] Switched to NOHz mode on CPU #1
[ 1.139590] Switched to NOHz mode on CPU #2
[ 1.139598] Switched to NOHz mode on CPU #3
[ 1.142357] pnp: PnP ACPI init
[ 1.142375] ACPI: bus type pnp registered
[ 1.142679] pnp 00:00: [bus 00-3e]
[ 1.142682] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.142684] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.142686] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.142689] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.142691] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.142693] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.142695] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.142697] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.142699] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.142700] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.142702] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.142707] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.142709] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.142711] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.142713] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.142715] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.142716] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.142718] pnp 00:00: [mem 0xe0000000-0xfeafffff window]
[ 1.142826] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.142841] pnp 00:01: [io 0x0000-0x001f]
[ 1.142843] pnp 00:01: [io 0x0081-0x0091]
[ 1.142844] pnp 00:01: [io 0x0093-0x009f]
[ 1.142846] pnp 00:01: [io 0x00c0-0x00df]
[ 1.142848] pnp 00:01: [dma 4]
[ 1.142872] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.142880] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.142901] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.142976] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.142999] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.143008] pnp 00:04: [io 0x00f0]
[ 1.143019] pnp 00:04: [irq 13]
[ 1.143044] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.143054] pnp 00:05: [io 0x002e-0x002f]
[ 1.143056] pnp 00:05: [io 0x004e-0x004f]
[ 1.143057] pnp 00:05: [io 0x0061]
[ 1.143059] pnp 00:05: [io 0x0063]
[ 1.143061] pnp 00:05: [io 0x0065]
[ 1.143062] pnp 00:05: [io 0x0067]
[ 1.143064] pnp 00:05: [io 0x0070]
[ 1.143065] pnp 00:05: [io 0x0080]
[ 1.143066] pnp 00:05: [io 0x0092]
[ 1.143068] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.143070] pnp 00:05: [io 0x0680-0x069f]
[ 1.143072] pnp 00:05: [io 0xff00-0xff0f]
[ 1.143073] pnp 00:05: [io 0xff10-0xff13]
[ 1.143075] pnp 00:05: [io 0x0800-0x0803]
[ 1.143076] pnp 00:05: [io 0x0400-0x047f]
[ 1.143078] pnp 00:05: [io 0x0500-0x057f]
[ 1.143080] pnp 00:05: [io 0x164e-0x164f]
[ 1.143140] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.143143] system 00:05: [io 0xff00-0xff0f] has been reserved
[ 1.143145] system 00:05: [io 0xff10-0xff13] has been reserved
[ 1.143148] system 00:05: [io 0x0800-0x0803] has been reserved
[ 1.143150] system 00:05: [io 0x0400-0x047f] has been reserved
[ 1.143152] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.143154] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.143157] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.143166] pnp 00:06: [io 0x0070-0x0077]
[ 1.143171] pnp 00:06: [irq 8]
[ 1.143208] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.143218] pnp 00:07: [io 0x0060]
[ 1.143220] pnp 00:07: [io 0x0064]
[ 1.143225] pnp 00:07: [irq 1]
[ 1.143250] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.143262] pnp 00:08: [irq 12]
[ 1.143288] pnp 00:08: Plug and Play ACPI device, IDs SNY9011 PNP0f13 (active)
[ 1.143642] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 1.143644] pnp 00:09: [mem 0xfed10000-0xfed13fff]
[ 1.143646] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[ 1.143650] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[ 1.143651] pnp 00:09: [mem 0xf8000000-0xfbffffff]
[ 1.143653] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[ 1.143655] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
[ 1.143657] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[ 1.143659] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 1.143661] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[ 1.143663] pnp 00:09: [mem 0xf5e0b000-0xf5e0bfff]
[ 1.143733] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.143736] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[ 1.143739] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.143741] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.143744] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.143746] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.143749] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.143751] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.143754] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.143757] system 00:09: [mem 0xf5e0b000-0xf5e0bfff] has been reserved
[ 1.143760] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.143900] pnp 00:0a: [bus 3f]
[ 1.143951] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 1.157077] pnp: PnP ACPI: found 11 devices
[ 1.157079] ACPI: ACPI bus type pnp unregistered
[ 1.163064] PCI: max bus depth: 1 pci_try_num: 2
[ 1.163124] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf5f00000-0xf60fffff 64bit pref]
[ 1.163130] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf6100000-0xf62fffff 64bit pref]
[ 1.163135] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf6300000-0xf64fffff 64bit pref]
[ 1.163140] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf6500000-0xf66fffff 64bit pref]
[ 1.163143] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.163146] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 1.163149] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf00fffff]
[ 1.163152] pci 0000:00:01.0: bridge window [mem pref disabled]
[ 1.163156] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.163159] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.163166] pci 0000:00:1c.0: bridge window [mem 0xf4a00000-0xf5dfffff]
[ 1.163171] pci 0000:00:1c.0: bridge window [mem 0xf6500000-0xf66fffff 64bit pref]
[ 1.163191] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.163195] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 1.163202] pci 0000:00:1c.1: bridge window [mem 0xf3600000-0xf49fffff]
[ 1.163207] pci 0000:00:1c.1: bridge window [mem 0xf6300000-0xf64fffff 64bit pref]
[ 1.163215] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 1.163219] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
[ 1.163225] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf35fffff]
[ 1.163230] pci 0000:00:1c.2: bridge window [mem 0xf6100000-0xf62fffff 64bit pref]
[ 1.163238] pci 0000:00:1c.5: PCI bridge to [bus 05-0c]
[ 1.163242] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
[ 1.163248] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf21fffff]
[ 1.163253] pci 0000:00:1c.5: bridge window [mem 0xf5f00000-0xf60fffff 64bit pref]
[ 1.163262] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
[ 1.163263] pci 0000:00:1e.0: bridge window [io disabled]
[ 1.163269] pci 0000:00:1e.0: bridge window [mem disabled]
[ 1.163274] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.163293] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.163296] pci 0000:00:01.0: setting latency timer to 64
[ 1.163303] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.163308] pci 0000:00:1c.0: setting latency timer to 64
[ 1.163318] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.163323] pci 0000:00:1c.1: setting latency timer to 64
[ 1.163333] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.163338] pci 0000:00:1c.2: setting latency timer to 64
[ 1.163345] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.163350] pci 0000:00:1c.5: setting latency timer to 64
[ 1.163359] pci 0000:00:1e.0: setting latency timer to 64
[ 1.163363] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.163366] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.163368] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.163370] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.163372] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.163374] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.163376] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.163378] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 1.163380] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 1.163383] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
[ 1.163385] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 1.163387] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xf00fffff]
[ 1.163389] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 1.163391] pci_bus 0000:02: resource 1 [mem 0xf4a00000-0xf5dfffff]
[ 1.163394] pci_bus 0000:02: resource 2 [mem 0xf6500000-0xf66fffff 64bit pref]
[ 1.163396] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 1.163398] pci_bus 0000:03: resource 1 [mem 0xf3600000-0xf49fffff]
[ 1.163400] pci_bus 0000:03: resource 2 [mem 0xf6300000-0xf64fffff 64bit pref]
[ 1.163403] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
[ 1.163405] pci_bus 0000:04: resource 1 [mem 0xf2200000-0xf35fffff]
[ 1.163407] pci_bus 0000:04: resource 2 [mem 0xf6100000-0xf62fffff 64bit pref]
[ 1.163409] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
[ 1.163411] pci_bus 0000:05: resource 1 [mem 0xf0200000-0xf21fffff]
[ 1.163414] pci_bus 0000:05: resource 2 [mem 0xf5f00000-0xf60fffff 64bit pref]
[ 1.163416] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
[ 1.163418] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
[ 1.163420] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.163422] pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.163424] pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.163426] pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.163428] pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.163431] pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
[ 1.163433] pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
[ 1.163435] pci_bus 0000:0d: resource 13 [mem 0xe0000000-0xfeafffff]
[ 1.163511] NET: Registered protocol family 2
[ 1.163700] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.164727] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.167663] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.168014] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.168016] TCP reno registered
[ 1.168027] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.168066] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.168344] NET: Registered protocol family 1
[ 2.499376] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.832221] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.832352] pci 0000:01:00.0: Boot video device
[ 3.832384] PCI: CLS 64 bytes, default 64
[ 3.832433] Unpacking initramfs...
[ 3.861003] Freeing initrd memory: 1780k freed
[ 3.861298] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.861302] Placing 64MB software IO TLB between ffff8800dae6e000 - ffff8800dee6e000
[ 3.861304] software IO TLB at phys 0xdae6e000 - 0xdee6e000
[ 3.861787] audit: initializing netlink socket (disabled)
[ 3.861799] type=2000 audit(1313594250.696:1): initialized
[ 3.869728] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.886559] VFS: Disk quotas dquot_6.5.2
[ 3.886700] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.886869] msgmni has been set to 7638
[ 3.887107] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.887147] io scheduler noop registered
[ 3.887150] io scheduler deadline registered
[ 3.887202] io scheduler cfq registered (default)
[ 3.887320] pcieport 0000:00:01.0: setting latency timer to 64
[ 3.887348] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 3.887672] vesafb: mode is 1600x900x32, linelength=6400, pages=1
[ 3.887674] vesafb: scrolling: redraw
[ 3.887677] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 3.890141] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 11250k, total 16384k
[ 4.087472] Console: switching to colour frame buffer device 200x56
[ 4.281840] fb0: VESA VGA frame buffer device
[ 4.281854] intel_idle: MWAIT substates: 0x1120
[ 4.281856] intel_idle: v0.4 model 0x25
[ 4.281857] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 4.281902] ERST: Table is not found!
[ 4.281955] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 4.469026] Linux agpgart interface v0.103
[ 4.469114] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.473482] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.473514] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.473591] mousedev: PS/2 mouse device common for all mice
[ 4.473653] rtc_cmos 00:06: RTC can wake from S4
[ 4.473761] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 4.473791] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 4.473886] cpuidle: using governor ladder
[ 4.474031] cpuidle: using governor menu
[ 4.474245] TCP cubic registered
[ 4.474248] NET: Registered protocol family 17
[ 4.474257] Registering the dns_resolver key type
[ 4.474353] PM: Checking hibernation image partition /dev/sda9
[ 4.496169] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 4.502184] PM: Hibernation image not present or could not be loaded.
[ 4.502194] registered taskstats version 1
[ 4.512403] rtc_cmos 00:06: setting system clock to 2011-08-17 15:17:31 UTC (1313594251)
[ 4.512569] Initializing network drop monitor service
[ 4.516031] Freeing unused kernel memory: 712k freed
[ 4.516201] Write protecting the kernel read-only data: 6144k
[ 4.516747] Freeing unused kernel memory: 12k freed
[ 4.522858] Freeing unused kernel memory: 776k freed
[ 4.564188] udevd[93]: starting version 173
[ 4.566281] ACPI: acpi_idle yielding to intel_idle
[ 4.624591] SCSI subsystem initialized
[ 4.630767] libata version 3.00 loaded.
[ 4.632419] ahci 0000:00:1f.2: version 3.0
[ 4.632443] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.632515] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 4.632554] ahci: SSS flag set, parallel bus scan disabled
[ 4.632606] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 4.632610] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part sxs apst
[ 4.632616] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.634910] scsi0 : ahci
[ 4.635536] scsi1 : ahci
[ 4.636083] scsi2 : ahci
[ 4.636721] scsi3 : ahci
[ 4.637168] scsi4 : ahci
[ 4.637475] scsi5 : ahci
[ 4.637727] ata1: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06100 irq 41
[ 4.637731] ata2: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06180 irq 41
[ 4.637733] ata3: DUMMY
[ 4.637734] ata4: DUMMY
[ 4.637737] ata5: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06300 irq 41
[ 4.637741] ata6: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06380 irq 41
[ 4.861932] Refined TSC clocksource calibration: 2128.123 MHz.
[ 4.861939] Switching to clocksource tsc
[ 4.955224] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.965120] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 4.965397] ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133
[ 4.965402] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.975403] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 4.975693] ata1.00: configured for UDMA/133
[ 4.976014] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500JI 2AC1 PQ: 0 ANSI: 5
[ 5.295101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.296935] ata2.00: ATAPI: Optiarc DVD RW AD-7700H, 1.V0, max UDMA/100
[ 5.303748] ata2.00: configured for UDMA/100
[ 5.319899] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7700H 1.V0 PQ: 0 ANSI: 5
[ 5.638306] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.958189] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.964558] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.964596] sd 0:0:0:0: [sda] Write Protect is off
[ 5.964599] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.964614] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.073618] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 6.074200] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.091859] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.091865] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.092089] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 7.960526] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 9.667393] udevd[273]: starting version 173
[ 10.439749] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 10.447052] ACPI: Lid Switch [LID0]
[ 10.449942] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 10.449952] ACPI: Power Button [PWRB]
[ 10.463109] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
[ 10.484243] acpi device:4b: registered as cooling_device4
[ 10.484911] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4a/LNXVIDEO:01/input/input3
[ 10.484921] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 10.494126] thermal LNXTHERM:00: registered as thermal_zone0
[ 10.494129] ACPI: Thermal Zone [TZ00] (58 C)
[ 10.506259] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 10.506267] ACPI: Battery Slot [BAT0] (battery present)
[ 10.517446] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 10.524583] thermal LNXTHERM:01: registered as thermal_zone1
[ 10.524586] ACPI: Thermal Zone [TZ01] (58 C)
[ 10.530700] ACPI: AC Adapter [ADP1] (off-line)
[ 10.648271] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 10.773153] iTCO_vendor_support: vendor-support=0
[ 10.924548] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 10.924706] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[ 10.924868] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.926971] sky2: driver version 1.28
[ 10.927036] sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.927049] sky2 0000:04:00.0: setting latency timer to 64
[ 10.927089] sky2 0000:04:00.0: Yukon-2 Optima chip revision 1
[ 10.927203] sky2 0000:04:00.0: irq 42 for MSI/MSI-X
[ 10.927532] sky2 0000:04:00.0: eth0: addr 54:42:49:10:6d:46
[ 11.021491] cfg80211: Calling CRDA to update world regulatory domain
[ 11.030984] usbcore: registered new interface driver usbfs
[ 11.031163] usbcore: registered new interface driver hub
[ 11.031208] usbcore: registered new device driver usb
[ 11.054022] sony_laptop: Sony Notebook Control Driver v0.6
[ 11.064072] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/SNY5001:00/input/input5
[ 11.064128] input: Sony Vaio Jogdial as /devices/virtual/input/input6
[ 11.064240] sony_laptop: brightness ignored, must be controlled by ACPI video driver
[ 11.268875] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 11.269169] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.269177] mei 0000:00:16.0: setting latency timer to 64
[ 11.304449] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 11.319698] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 11.319743] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 11.354358] sdhci: Secure Digital Host Controller Interface driver
[ 11.354362] sdhci: Copyright(c) Pierre Ossman
[ 11.374472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 11.374519] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.374559] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 11.374564] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 11.374590] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 11.374630] ehci_hcd 0000:00:1a.0: debug port 2
[ 11.378526] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 11.378534] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf5e08000
[ 11.389468] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 11.389714] hub 1-0:1.0: USB hub found
[ 11.389721] hub 1-0:1.0: 2 ports detected
[ 11.389823] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 11.389872] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 11.389877] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 11.389894] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 11.389929] ehci_hcd 0000:00:1d.0: debug port 2
[ 11.393814] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 11.393838] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf5e07000
[ 11.406179] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 11.406377] hub 2-0:1.0: USB hub found
[ 11.406382] hub 2-0:1.0: 2 ports detected
[ 11.514999] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 0)
[ 11.515023] sdhci-pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 11.515072] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 11.515081] sdhci-pci 0000:03:00.0: setting latency timer to 64
[ 11.515108] _regulator_get: 0000:03:00.0 supply vmmc not found, using dummy regulator
[ 11.515145] Registered led device: mmc0::
[ 11.515206] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
[ 11.515222] sdhci-pci 0000:03:00.4: SDHCI controller found [1180:e822] (rev 0)
[ 11.515237] sdhci-pci 0000:03:00.4: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 11.515253] sdhci-pci 0000:03:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
[ 11.515261] sdhci-pci 0000:03:00.4: setting latency timer to 64
[ 11.515278] _regulator_get: 0000:03:00.4 supply vmmc not found, using dummy regulator
[ 11.515308] Registered led device: mmc1::
[ 11.515344] mmc1: SDHCI controller on PCI [0000:03:00.4] using DMA
[ 11.696095] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 11.800486] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input7
[ 11.823379] hub 1-1:1.0: USB hub found
[ 11.823555] hub 1-1:1.0: 6 ports detected
[ 11.881300] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.881313] ath9k 0000:02:00.0: setting latency timer to 64
[ 11.899363] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 11.899454] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 11.899494] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.929270] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 11.931327] ath: EEPROM regdomain: 0x65
[ 11.931329] ath: EEPROM indicates we should expect a direct regpair map
[ 11.931333] ath: Country alpha2 being used: 00
[ 11.931334] ath: Regpair used: 0x65
[ 12.053537] hub 2-1:1.0: USB hub found
[ 12.053638] hub 2-1:1.0: 8 ports detected
[ 12.058338] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 12.058344] Disabling lock debugging due to kernel taint
[ 12.089898] [fglrx] Maximum main memory to use for locked dma buffers: 3660 MBytes.
[ 12.090143] [fglrx] vendor: 1002 device: 68e0 count: 1
[ 12.090556] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
[ 12.090572] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.090577] pci 0000:01:00.0: setting latency timer to 64
[ 12.090779] [fglrx] Kernel PAT support is enabled
[ 12.090802] [fglrx] module loaded - fglrx 8.87.5 [Jul 7 2011] with 1 minors
[ 12.101099] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 12.101452] Registered led device: ath9k-phy0
[ 12.101460] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90005d00000, irq=16
[ 12.115758] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 12.117699] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 12.117756] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.117877] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 12.117956] HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
[ 12.117979] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 12.132761] usb 1-1.2: new full speed USB device number 3 using ehci_hcd
[ 12.168259] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 12.168639] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 12.265962] usb 1-1.2: new high speed USB device number 4 using ehci_hcd
[ 12.387463] cfg80211: World regulatory domain updated:
[ 12.387466] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.387469] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.387472] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.387474] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.387477] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.387479] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.387493] cfg80211: Calling CRDA for country: IT
[ 12.390329] cfg80211: Regulatory domain changed to country: IT
[ 12.390332] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.390334] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 12.390337] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 12.390339] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 12.390341] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 12.462672] usb 2-1.2: new low speed USB device number 3 using ehci_hcd
[ 12.939879] Linux media interface: v0.10
[ 12.994380] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input12
[ 12.994487] generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
[ 12.994502] usbcore: registered new interface driver usbhid
[ 12.994504] usbhid: USB HID core driver
[ 13.030968] Linux video capture interface: v2.00
[ 13.053392] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (064e:a213)
[ 13.060994] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input13
[ 13.061057] usbcore: registered new interface driver uvcvideo
[ 13.061059] USB Video Class driver (v1.1.0)
[ 15.202804] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 15.503756] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 15.505206] SGI XFS Quota Management subsystem
[ 15.527846] XFS (sda10): Mounting Filesystem
[ 16.058466] XFS (sda10): Ending clean mount
[ 16.172238] REISERFS (device sda8): found reiserfs format "3.6" with standard journal
[ 16.172257] REISERFS (device sda8): using ordered data mode
[ 16.180082] REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 16.180470] REISERFS (device sda8): checking transaction log (sda8)
[ 16.225092] REISERFS (device sda8): Using r5 hash to sort names
[ 16.362086] EXT3-fs: barriers not enabled
[ 16.377355] kjournald starting. Commit interval 5 seconds
[ 16.377554] EXT3-fs (sda6): using internal journal
[ 16.377560] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 16.475339] fuse init (API version 7.16)
[ 17.345752] Adding 1052220k swap on /dev/sda9. Priority:-1 extents:1 across:1052220k
Last edited by TheImmortalPhoenix (2011-08-17 13:23:54) -
HT1476 My iPhone 4 becomes very slow after upgrading to IOS7
My iPhonel 4 becomes very slow after upgrading to IOS7
i did every tricks might help like disabling Background Apps and turning of Documents and Data syncing in iCloud also Increase Contrast and restoring it to factory default....
it's still very slow in any action needed also there is a lot of bugs when using it like canceling the call but it's not apprearing in the lock screen or it appears but when sliding it it's opening another notification... touch is very laggy ..
Apple Please we need helpI have the same problem...sometimes it even freezes...I have to close some of the applications from background to resolve the freezing and improve speed....but it never regains the speed it had before the update.
I am also interested in going to the older version if I could. -
My iphone 5 is very slow after upgrading to ios8.
my iphone 5 is very slow after upgrading to ios8. What to do? Can I revert to ios7?
Hello, RobRey77
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend going through when experiencing this issue.
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
iOS: Not responding
http://support.apple.com/kb/TS3281
Cheers,
Jason H. -
I just updated my Macbook (2010) to Yosemite, and it's become very slow. After searching through this community, I downloaded and run EtreCheck, but don't understand what the report means. Please could you help me with what I should do to improve my computer's speed, aside from upgrading my RAM? Thank you so much.
The report:
Problem description:
my macbook is running very slowly after upgrading to yosemite.
EtreCheck version: 2.0.11 (98)
Report generated 12 November 2014 1:44:14 pm SGT
Hardware Information: ℹ️
MacBook (13-inch, Mid 2010) (Verified)
MacBook - model: MacBook7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM Upgradeable
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 3:23:3
Disk Information: ℹ️
TOSHIBA MK2555GSXF disk0 : (250.06 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 249.20 GB (25.42 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Western Digital My Passport 0748 1 TB
S.M.A.R.T. Status: Verified
EFI (disk1s1) <not mounted> : 210 MB
tansey (disk1s2) /Volumes/tansey : 999.83 GB (951.98 GB free)
Apple Inc. Built-in iSight
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Configuration files: ℹ️
/etc/hosts - Count: 15
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.13) Support
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.13) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.8) Support
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.8) Support
[not loaded] com.novamedia.driver.IceraUSB_MSD_Bypass (1.3.0) Support
[not loaded] com.novatelwireless.driver.3G (3.0.13) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (3.0.13) Support
[not loaded] com.option.driver.Option72 (2.15.0) Support
[not loaded] com.option.driver.OptionHS (3.26.0) Support
[not loaded] com.option.driver.OptionMSD (1.21.0) Support
[not loaded] com.option.driver.OptionQC (1.11.0) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.45) Support
[not loaded] com.vodafone.driver (3.0.9) Support
[not loaded] com.zte.driver.cdc_ecm_qmi (1.0.1) Support
[not loaded] com.zte.driver.cdc_usb_bus (1.0.1) Support
[not loaded] de.novamedia.driver.NMSamsung (0.0.2) Support
[not loaded] de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1) Support
[not loaded] de.novamedia.oem.vodafone.vtp.huawei.cdc (0.0.2) Support
/System/Library/Extensions/NMHuaweiPhonesVTPCDC_106.kext/Contents/PlugIns
[not loaded] de.novamedia.driver.NMUSBCDCACMControl (3.2.12) Support
/System/Library/Extensions/NMSamsungDriver_106.kext/Contents/PlugIns
[not loaded] de.novamedia.driver.NMUSBCDCACMData (3.2.12) Support
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (3.0.13) Support
/System/Library/Extensions/Vodafone.kext/Contents/PlugIns
[not loaded] com.vodafone.driver.Data (3.0.9) Support
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
HWNetMgr: Path: /Library/StartupItems/HWNetMgr
HWPortDetect: Path: /Library/StartupItems/HWPortDetect
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[failed] com.apple.accountsd.plist
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.bird.plist
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cloudd.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.coreservices.uiagent.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.icloud.fmfd.plist
[failed] com.apple.iconservices.iconservicesagent.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.pluginkit.pkd.plist
[failed] com.apple.recentsd.plist
[failed] com.apple.security.cloudkeychainproxy.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.awdd.plist
[failed] com.apple.cache_delete.plist
[failed] com.apple.coresymbolicationd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.diagnosticd.plist
[failed] com.apple.iconservices.iconservicesagent.plist
[failed] com.apple.iconservices.iconservicesd.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.installd.plist
[failed] com.apple.MobileFileIntegrity.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.sandboxd.plist
[failed] com.apple.softwareupdated.plist
[failed] com.apple.spindump.plist
[failed] com.apple.sysmond.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist
[running] de.novamedia.nmnetmgrd.plist Support
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.adobe.CS5ServiceManager.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] de.novamedia.VodafoneDeviceObserver.plist Support
[invalid?] SwapperUFi.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[loaded] com.cloudpath.maccmd.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[invalid?] PPPMonitord.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.akamai.client.plist Support
[invalid?] com.divx.agent.postinstall.plist Support
[failed] com.facebook.videochat.[redacted].plist Support
User Login Items: ℹ️
Dropbox Application (/Applications/Dropbox.app)
SurplusMeterAgent UNKNOWN (missing value)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
Google Earth Web Plug-in: Version: 7.1 Support
Default Browser: Version: 600 - SDK 10.10
OfficeLiveBrowserPlugin: Version: 12.2.6 Support
OVSHelper: Version: 1.1 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.223
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.12 Support
SharePointBrowserPlugin: Version: 14.0.0 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User Internet Plug-ins: ℹ️
OctoshapeWeb: Version: 1.0 Support
Safari Extensions: ℹ️
DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
DivX Support
Flash Player Support
Time Machine: ℹ️
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 249.20 GB Disk used: 223.78 GB
Destinations:
Time Machine Backups [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 223.78 GB X 3)
Top Processes by CPU: ℹ️
15% WindowServer
1% Dropbox
0% AppleSpell
0% Skype
0% imagent
Top Processes by Memory: ℹ️
60 MB Google Chrome
56 MB JavaApplicationStub
47 MB Skype
45 MB Finder
45 MB WindowServer
Virtual Memory Information: ℹ️
60 MB Free RAM
443 MB Active RAM
398 MB Inactive RAM
349 MB Wired RAM
16.91 GB Page-ins
633 MB Page-outsI advise to reply to the one you want to reply to.
You have had good information here. I will not repeat that here.
I would like to add:
you have incompatible software: start in SafeMode, read Woodmeister and see if it is free of issues.
Akamai is crap software needed or not, Huawei the same.
It is very possible that the keygenerator you used for generating a key for some softwares has infected your mac.
The non-regular software with the false key(s) are not compatible probably or generate malware. Luckily you can not update them automatically because the keygenerator blocked the software for contacting the developer... I propose to consider getting rid of those softwares by really good uninstalling.
You have a beautiful mac, don't degenerate it with crapped software. There are alternatives for expensive software, for example Adobe Photoshop has a free alternative (with a less beautiful interface) in GIMP. And so on.
Lex -
I am running very slowly after upgrading to ver 10.9.1 on my macbook pro. Can anyone help me to solve this problem. I am including the results from running Etresoft.
Hardware Information:
MacBook Pro (15-inch, Mid 2010)
MacBook Pro - model: MacBookPro6,2
1 2.53 GHz Intel Core i5 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 256 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
Startup Items:
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 0:53:49
Disk Information:
Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (200.83 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS23N
USB Information:
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Internal Memory Card Reader
Western Digital My Passport 071A 1 TB
EFI (disk1s1) <not mounted>: 209.7 MB
Backup (disk1s2) /Volumes/Backup: 999.83 GB (622.71 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.kodak.aio.kcpconnector.plist
[loaded] com.leapfrog.connect.shell.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.sonos.smbbump.plist
Launch Agents:
[loaded] com.kodak.BonjourAgent.plist
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist
[loaded] com.google.keystone.agent.plist
[loaded] com.kodak.KODAK AiO Firmware Updater.plist
[loaded] com.kodak.KODAK AiO Software Updater.plist
[loaded] com.kodak.StatisticCollection.plist
[loaded] com.spotify.webhelper.plist
[loaded] uk.co.markallan.clamxav.freshclam.plist
User Login Items:
Monitor
ScanSnap Manager
Evernote
Dropbox
AdobeResourceSynchronizer
3rd Party Preference Panes:
Flash Player
Growl
Internet Plug-ins::
Flip4Mac WMV Plugin: Version: 2.3.8.1
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.8
AdobePDFViewer: Version: 10.1.8
Flash Player: Version: 11.9.900.170 - SDK 10.6
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
Silverlight: Version: 4.0.51204.0
iPhotoPhotocast: Version: 7.0 - SDK 10.8
User Internet Plug-ins::
Google Earth Web Plug-in: Version: 7.1
Dashlane: Version: Dashlane 1.0.0 - SDK 10.7
Bad Fonts:
None
Old applications:
AiOFirmwareUpdater: Version: 7.7 - SDK 10.5
/Library/Printers/Kodak/AiO_Printers/AiOFirmwareUpdater.app
Install Spotify: Version: 1.0 - SDK 10.5
/Users/jimschindler/Downloads/Install Spotify.app
KODAK AiO Home Center: Version: 7.7.3 - SDK 10.5
/Library/Printers/Kodak/AiO_Printers/KODAK AiO Home Center.app
KODAK AiO Scan: Version: 7.7.3 - SDK 10.5
/Library/Printers/Kodak/AiO_Printers/KODAK AiO Scan.app
KODAK AiO Software Updater: Version: 7.7 - SDK 10.5
/Library/Printers/Kodak/AiO_Printers/KODAK AiO Software Updater.app
KODAK AiO Uninstall: Version: 7.7.3 - SDK 10.5
/Library/Printers/Kodak/AiO_Printers/KODAK AiO Uninstall.app
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Document Connection.app
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
Microsoft Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Excel.app
Microsoft Graph: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Graph.app
Microsoft Language Register: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
Microsoft Outlook: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Outlook.app
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft PowerPoint.app
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
Microsoft Word: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Word.app
My Day: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/My Day.app
Open XML for Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Open XML for Excel.app
Registration: Version: 7.7.3 - SDK 10.5
/Library/Printers/Kodak/AiO_Printers/Registration.app
Solver: Version: 1.0 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
Spotify: Version: 0.8.4.124.ga3559d86 - SDK 10.5
/Applications/Spotify.app
SyncServicesAgent: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 464.96 GB Disk used: 277.92 GB
Destinations:
Backup [Local] (Last used)
Total size: 931.17 GB
Total number of backups: 85
Oldest backup: 2013-02-13 18:40:47 +0000
Last backup: 2013-12-31 17:59:26 +0000
Size of backup disk: Adequate
Backup size 931.17 GB > (Disk used 277.92 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
29% Mail
3% WindowServer
2% mtmd
1% EtreCheck
0% NETGEARGenieDaemon
Top Processes by Memory:
410 MB mds_stores
238 MB Evernote
229 MB Mail
147 MB iBank
123 MB WindowServer
Virtual Memory Statistics:
3.36 GB Free RAM
2.92 GB Active RAM
621 MB Inactive RAM
1.11 GB Wired RAM
1.67 GB Page-ins
0 B Page-outsThings You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to: OS X Maintenance - MacAttorney;
The X Lab: The X-FAQs;
The Safe Mac » Mac Performance Guide;
The Safe Mac » The myth of the dirty Mac;
Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
used to manage backups and to restore backups. Time Machine
requires a backup drive that is at least twice the capacity of the
drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file. -
My Macbook pro is very slow after upgrading to Mavericks
I upgraded to Mavericks on October 2013, since then my Mac is very slow, I have followed several suggestions in this forum, but the problem has not been fixed. Is it possible to return to Mountain Lion, my Mac had a good performace before the upgrade to Mavericks.
The report from etrecheck is the following:
Hardware Information:
MacBook Pro (13-inch, Late 2011)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 20:59:38
Disk Information:
ST9500325ASG disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (216.35 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information:
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
Launch Agents:
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
User Login Items:
iTunesHelper
Microsoft Database Daemon
KiesAgent
fuspredownloader
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 10.1.0 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.3.8 - SDK 10.6 3rd-Party support link
Silverlight: Version: 4.1.10329.0 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Java 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Centro de carga de Microsoft: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Avisos de Microsoft Office: Version: 14.3.8 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.8 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Galería de imágenes de Microsoft: Version: 14.3.8 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/MERP2.0
Informe de errores de Microsoft: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Conexión de documentos de Microsoft: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Complementos/Solver.app
iPackr: Version: 1.50 - SDK 10.0 3rd-Party support link
MoxierWallet: Version: 1.1.3 - SDK 10.5 3rd-Party support link
Graphing Calculator Viewer: Version: 4.0.2 - SDK 10.0 3rd-Party support link
Mail Clips: Version: 1.0.1 - SDK 10.4 3rd-Party support link
Kies: Version: 3.0.0.13091_3 - SDK 10.5 3rd-Party support link
Timey: Version: 1.1.0 - SDK 10.0 3rd-Party support link
WheelOfLifeLite: Version: 1.3 - SDK 10.0 3rd-Party support link
EasyFind: Version: 4.9 - SDK 10.5 3rd-Party support link
FaceboxPro: Version: 2.1 - SDK 10.0 3rd-Party support link
MediaMaster Server: Version: 1.3 - SDK 10.0 3rd-Party support link
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 464.96 GB Disk used: 263.47 GB
Destinations:
TOSHIBA EXT [Local] (Last used)
Total size: 3
Total number of backups: 12
Oldest backup: 2013-11-01 04:28:05 +0000
Last backup: 2014-01-28 22:54:22 +0000
Size of backup disk: Excellent
Backup size 3 > (Disk size 464.96 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
5% mds_stores
4% mds
3% WindowServer
1% EtreCheck
1% mtmd
Top Processes by Memory:
295 MB com.apple.IconServicesAgent
172 MB Safari
168 MB Microsoft Database Daemon
70 MB com.apple.WebKit.Networking
70 MB WindowServer
Virtual Memory Information:
965 MB Free RAM
1.52 GB Active RAM
549 MB Inactive RAM
1021 MB Wired RAM
531 MB Page-ins
0 B Page-outs
Thak you in advanceI upgraded to Mavericks on October 2013, since then my Mac is very slow, I have followed several suggestions in this forum, but the problem has not been fixed. Is it possible to return to Mountain Lion, my Mac had a good performace before the upgrade to Mavericks.
The report from etrecheck is the following:
Hardware Information:
MacBook Pro (13-inch, Late 2011)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 20:59:38
Disk Information:
ST9500325ASG disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (216.35 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information:
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
Launch Agents:
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
User Login Items:
iTunesHelper
Microsoft Database Daemon
KiesAgent
fuspredownloader
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 10.1.0 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.3.8 - SDK 10.6 3rd-Party support link
Silverlight: Version: 4.1.10329.0 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Java 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Centro de carga de Microsoft: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Avisos de Microsoft Office: Version: 14.3.8 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.8 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Galería de imágenes de Microsoft: Version: 14.3.8 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/MERP2.0
Informe de errores de Microsoft: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Conexión de documentos de Microsoft: Version: 14.3.8 - SDK 10.5 3rd-Party support link
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Complementos/Solver.app
iPackr: Version: 1.50 - SDK 10.0 3rd-Party support link
MoxierWallet: Version: 1.1.3 - SDK 10.5 3rd-Party support link
Graphing Calculator Viewer: Version: 4.0.2 - SDK 10.0 3rd-Party support link
Mail Clips: Version: 1.0.1 - SDK 10.4 3rd-Party support link
Kies: Version: 3.0.0.13091_3 - SDK 10.5 3rd-Party support link
Timey: Version: 1.1.0 - SDK 10.0 3rd-Party support link
WheelOfLifeLite: Version: 1.3 - SDK 10.0 3rd-Party support link
EasyFind: Version: 4.9 - SDK 10.5 3rd-Party support link
FaceboxPro: Version: 2.1 - SDK 10.0 3rd-Party support link
MediaMaster Server: Version: 1.3 - SDK 10.0 3rd-Party support link
Time Machine:
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 464.96 GB Disk used: 263.47 GB
Destinations:
TOSHIBA EXT [Local] (Last used)
Total size: 3
Total number of backups: 12
Oldest backup: 2013-11-01 04:28:05 +0000
Last backup: 2014-01-28 22:54:22 +0000
Size of backup disk: Excellent
Backup size 3 > (Disk size 464.96 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
5% mds_stores
4% mds
3% WindowServer
1% EtreCheck
1% mtmd
Top Processes by Memory:
295 MB com.apple.IconServicesAgent
172 MB Safari
168 MB Microsoft Database Daemon
70 MB com.apple.WebKit.Networking
70 MB WindowServer
Virtual Memory Information:
965 MB Free RAM
1.52 GB Active RAM
549 MB Inactive RAM
1021 MB Wired RAM
531 MB Page-ins
0 B Page-outs
Thak you in advance -
Late 2007 15" MBP Very slow after upgrading to Mavericks
Hi guys,
this is my first post here. I look forward to learn and help others.
The reason of this post is, as outlined in the title, slow paerformance of my computer after upgrading to Mavericks. It was kinda slow from before but this time it's almost unbearable to use it. I used to be able to run VMWare with 2 XP and 1 windows server machines WITH JUST 2 GB OF RAM! Now I have 4 GB and can barely run a single virtual machine with XP and the cooling fans come on just by watching a video on youtube, which also makes performance take a dump.
These are the specs extracted from EtreCheck:
Hardware Information:
MacBook Pro (15-inch 2.4/2.2GHz)
MacBook Pro - model: MacBookPro3,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
GeForce 8600M GT - VRAM: 256 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
Startup Items:
DynDNSUpdater - Path: /Library/StartupItems/DynDNSUpdater
System Software:
OS X 10.9 (13A603) - Uptime: 6 days 2:7:17
Disk Information:
WDC WD5000BEVT-00ZAT0 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 149.92 GB (76.8 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
Storage (disk0s4) /Volumes/Storage: 349.19 GB (54.74 GB free)
USB Information:
Apple Inc. Built-in iSight
Apple Inc. Bluetooth USB Host Controller
Apple Computer Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.74)
com.globaldelight.driver.BoomDevice (1.1)
com.eltima.SyncMate.kext (0.2.5b15)
com.vmware.kext.vmci (90.4.18)
com.vmware.kext.vsockets (90.4.23)
com.vmware.kext.vmnet (0104.03.86)
com.vmware.kext.vmx86 (0104.03.86)
com.vmware.kext.vmioplug.10.1.24 (10.1.24)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[invalid] com.bjango.istatmenusdaemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.rim.BBDaemon.plist
[loaded] com.synium.cleanappdaemon.plist
[failed] rapiback.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.bjango.istatmenusagent.plist
[loaded] com.epson.epw.agent.plist
[loaded] com.rim.BBAlbumArtCacher.plist
[loaded] com.rim.BBLaunchAgent.plist
[loaded] net.culater.SIMBL.Agent.plist
[loaded] org.gpgtools.macgpg2.gpg-agent.plist
[invalid] org.gpgtools.macgpg2.gpg-agent.plist.plist
[failed] syncmateStarter.plist
User Launch Agents:
[loaded] com.google.keystone.agent.plist
[loaded] com.spotify.webhelper.plist
[loaded] com.valvesoftware.steamclean.plist
User Login Items:
Boom
Flux
iTunesHelper
Dropbox
Cinch
3rd Party Preference Panes:
Application Enhancer
Box Sync
Flash Player
Flip4Mac WMV
FUSE for OS X (OSXFUSE)
GPGPreferences
Perian
Internet Plug-ins:
Default Browser.plugin
DirectorShockwave.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
MeetingJoinPlugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
Unity Web Player.plugin
User Internet Plug-ins:
Bad Fonts:
None
Time Machine:
Skip System Files: NO
Auto backup: NO
Time Machine not configured!
Top Processes by CPU:
22% vmware-vmx
6% Google Chrome
4% WindowServer
3% coreaudiod
2% Boom
1% EtreCheck
0% BBLaunchAgent
0% mds_stores
0% CleanApp Daemon
0% mds
Top Processes by Memory:
586 MB vmware-vmx
135 MB Finder
98 MB Google Chrome
90 MB softwareupdated
74 MB Dropbox
66 MB VMware Fusion
59 MB mds_stores
58 MB Google Chrome Helper
53 MB WindowServer
45 MB systemstats
Virtual Memory Statistics:
40 MB Free RAM
1.18 GB Active RAM
1.13 GB Inactive RAM
1.07 GB Wired RAM
24.09 GB Page-ins
645 MB Page-outs
I understand it says my RAM is way too low, but hve no idea what's killing it. So far I've disabled and uninstalled all DynDNS items. I just read about Chrome's slow performance for MBP's and plan to switch back to Safari (Firefox made my computer even slower).
Thanks in advance for any light shed on this.
Oscar.Thank you Kappy, while I was reviewing the log from EtreCheck I noticed the 3rd party preference panes, launchers and daemos. I deleted a few of them and it really helped with system performance. Reading your reply confirms that what I did was the right thing; here is an updated log from EtreCheck:
Hardware Information:
MacBook Pro (15-inch 2.4/2.2GHz)
MacBook Pro - model: MacBookPro3,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
GeForce 8600M GT - VRAM: 256 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0
AirPlay: Version: 1.9
AppleAVBAudio: Version: 2.0.0
iSightAudio: Version: 7.7.3
System Software:
OS X 10.9 (13A603) - Uptime: 0 days 0:22:52
Disk Information:
WDC WD5000BEVT-00ZAT0 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 149.92 GB (77.67 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
Storage (disk0s4) /Volumes/Storage: 349.19 GB (54.09 GB free)
USB Information:
Apple Inc. Built-in iSight
Apple Inc. Bluetooth USB Host Controller
Apple Computer Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.74)
com.globaldelight.driver.BoomDevice (1.1)
com.eltima.SyncMate.kext (0.2.5b15)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[invalid] com.bjango.istatmenusdaemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.rim.BBDaemon.plist
[loaded] com.synium.cleanappdaemon.plist
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.bjango.istatmenusagent.plist
[loaded] com.epson.epw.agent.plist
[loaded] com.rim.BBAlbumArtCacher.plist
[loaded] com.rim.BBLaunchAgent.plist
[loaded] net.culater.SIMBL.Agent.plist
User Launch Agents:
[loaded] com.google.keystone.agent.plist
[loaded] com.spotify.webhelper.plist
[loaded] com.valvesoftware.steamclean.plist
User Login Items:
Boom
Flux
iTunesHelper
Dropbox
Cinch
3rd Party Preference Panes:
Box Sync
Flash Player
Flip4Mac WMV
FUSE for OS X (OSXFUSE)
Perian
Internet Plug-ins:
Default Browser.plugin
DirectorShockwave.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
MeetingJoinPlugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
Unity Web Player.plugin
User Internet Plug-ins:
Bad Fonts:
None
Time Machine:
Skip System Files: NO
Auto backup: NO
Time Machine not configured!
Top Processes by CPU:
5% WindowServer
4% coreaudiod
3% com.apple.qtkitserver
2% com.apple.WebKit.WebContent
1% EtreCheck
1% Boom
0% SystemUIServer
0% BBLaunchAgent
0% CleanApp Daemon
0% Safari
Top Processes by Memory:
180 MB com.apple.WebKit.WebContent
152 MB com.apple.IconServicesAgent
119 MB Safari
90 MB mds_stores
82 MB com.apple.quicklook.satellite
78 MB com.apple.iTunesLibraryService
66 MB Dropbox
57 MB Finder
49 MB Preview
41 MB CleanApp Daemon
Virtual Memory Statistics:
846 MB Free RAM
2.02 GB Active RAM
620 MB Inactive RAM
561 MB Wired RAM
1.22 GB Page-ins
0 B Page-outs
I was reading about GeekBench in the discusions and decided to give it a go, although I was able to only perform the 32-bit tests, I got 1268 on the single-core score and 2187 for the multi-core score; I don't know how good or bad those numbers are. Wish I had a before and after reading but I read about it too late, when I had already erased several items.
I will appreciate any further input BEFORE I decide to reinstall the OS from scratch.
Oscar. -
Internet conection very slow after upgrading to Leopard
Hi
after installing Leopard, my internet connection is often very slow. Opening a new website needs a much longer time as before upgading. Sometimes it works as fast as before and sometimes it just can not find the server.
Have you recognized similiar problems after upgrading and have any hints or is it only related to the internet connection/provider?
ThanksFirst check to see if Spotlight is still indexing. Then go to
Applications/Safari and Control Click on the Safari icon and scroll to Get Info, make sure the Open Using Rosetta box is not checked. You can also go to Safari/Preferences and Reset safari, after Importing your bookmarks to reinstall later.
Did you use Migration from a PPC Mac to your Intel? How are the other Apps running?
Joe -
IMac became very slow after upgrading to Mavericks
after upgrading to Mavericks my mac became very slow, i can´t do anything on it without waiting at least15 min. Does someone know what i can do to make it better?
Mine too, I am really frustrated, since I read all reviews and asked some friends and co-workers about mavericks, they are all happy, but my macbook is almost useless now.
I tried using Mackeeper, but then apple says it´s a malware, so there´s my solution....
Anyone with a good answer for this problem ???
Is there a way to download Snow Leopard and do a clean install ?? -
Windows 8 Pro running very slow after upgrade
Hi,
I ve just upgraded to windows 8 Pro (64-bit) from Windows 7 Pro (64-bit) on macbook pro retina 15 but windows 8 is running very slow on my MBP whereas windows 7 was lightning fast. Now in windows 8 i have to wait till my app is active for click and also sometimes the apps take long time to load .. has anyone experienced this kind of problem in windows 8 .. i ve restarted it many times but its not quick as compared to windows 7... bahhhh i was expecting high performace on core i7 2.6 GHz 8 GB RAM machineRemove the installation and start again, it's Wndows, treat it like Windows.
-
MacPro usb very slow after upgrading to mountain lion
When backing up with Carbon Copy to an external USB drive very slow, eventually the system freezes. After upgrading to Mountain Lion its been a complete pain when trying to do back-ups. Does Apple have a USB software fix for this?
Disconnect the external drive and see whether there's an improvement.
-
Spotlight indexing very slow after upgrading to 10.7.5
SInce I have updating to 10.7.5, the spotlight indexing of my hard drive is very slow : only 40% has been performed in two days.
Does anyone have similar problems after upgrading to 10.7.5 and know how to fix them ?
Here are some excerpts of log files :
mdworker(7618) deny file-write-create /opt/local/var/macports/home/Library/Preferences/com.apple.LaunchServices.plist .lockfile
Process: mdworker [7618]
Path: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Support/mdworker
Load Address: 0x10dfb3000
Identifier: mdworker
Version: ??? (???)
Code Type: X86-64 (Native)
Parent Process: launchd [7616]
Date/Time: 2012-09-25 06:05:42.300 +0200
OS Version: Mac OS X 10.7.5 (11G56)You're not the only one. I've been re-indexing on and off for the last four days to no avail. I had to call Apple today and was put through to a senior technical advisor. After doing a data capture for them I was told that they should be able to come back with an answer within the next two days.
It's worth giving them a call to let them run through the clearing caches process with you if you haven't done that already. Remember that using your machine whilst it's indexing also slows the process down.
I will let you know when they come back with an answer but I hope by t would hahen both of our machines would have finished re-indexing by then...
Maybe you are looking for
-
Issue in calculating sum on a column at the end of the report in Pivot view
Hi, I have some columns like Hierarchy column A, Non Hierarchical columns B, C and a measure D. In Pivot view under rows I have placed columns A,B and C in Columns and D in measures. If I try to calculate sum of values at the end of report by using o
-
How to get the data in servlet if the request encryption type is multipart/
I am uploading files to the server. at that time,before upload ,I need to validate the upload file names. so,i am trying to get the value of those files names using request.getParameter("jobsheet"); in servlet. its giving null insted of file path. ho
-
Contacts not visible in the groups
I you make a group on the mac mini , the contacts in the group are showed. 1. After synchronising the Iphone shows the groups but is not able to show the contacts or you have to eliminate all other groups????? 2. Not all the contacts from the mac m
-
Is it worth it to fix my iBook G4 or Macbook?
I have an iBook G4 that I bought used 3 years ago for 300.00. Recently it started with the "kernal panic" stuff and I took it to a guy who fixes Macs. He determined the cause to be the logic board and quote is 250.00. Then my son gave me his non-w
-
Acrobat Reader Zoom is Sluggish
I am using the current / updated version of Adobe Acrobat Reader and have had this issue on two computers running first Win 8 and now 8.1. When viewing PDF documents (smaller in size) and images the zoom out function takes 2 minutes to go from 150% t