OAS 10.1.2 and 10.1.3 on same server

Could I run OAS 10.1.2 and 10.1.3 the same time on the same Sun Solaris box (different ports of course)?
Thanks

Yes to both questions.
Refer to the Upgrade and Compatibility Guide for your 10.1.3.x release.
For example, here is the 10.1.3.1 version:
http://download.oracle.com/docs/cd/B31017_01/core.1013/b25585/compability.htm#BABBDJCA
Thanks,
Beth

Similar Messages

  • Delete the existing sharepoint farm it is a development machinie and re create again in same server

    Hi
    i want to 
    delete the existing sharepoint farm it is a development machinie  and re create again in same server.
    because i am facing issues to configure user profile service, 
    the user profile syncronisation service starting and after some time its stopped.
    while i am reading http://www.harbar.net/articles/sp2010ups.aspx
    in current farm i given ip address for sql server while installing sharepoint
    you have not used a Fully Qualified Domain Name or IP Address when specifying
    the SQL Server when running the SharePoint Configuration Wizard (PSConfig). Using either is strongly discouraged,
    if i recreate the farm is it creates new databases in sql srver?
    adil

    1. Uninstall any custom / third party solutions deployed in server.
    2. from central admin, delete web applications along with DB.
    3. delete all service applications.
    4. From the program settings, un-install sharepoint.
    5. Go to SQL and delete if any DB from SP is left.
    6. Uninstall SQL, if you see any issue.
    These are high level reverse steps of the installation.
    Thanks, Ashish | Please mark a post helpful/answer if it is helpful or answer your query.

  • SQL 2000 AND SQL 2005 ON THE SAME SERVER

    Hi all ,
    I have an installation of    SAP4.7SR1 /MSSQL2000 on a windows 2003 server.
    I want to install SAP SOLUTION MANAGER 4.0 /MSSQL2005 on the same server ... it is possible that two version of SQL ( 2000 and 2005 ) coexists on the same server ? It's sufficent to install SQL into two different directory ?
    Thank's a lot.
    Antonio Voce.

    Hi,
    yes it is possible to install SQL2000 and SQL2005 on same server but there are certain special considerations that you should be aware of
    look at following blog
    http://blogs.msdn.com/sqlblog/archive/2006/09/27/co-existence-of-sql-2005-with-sql-2000.aspx
    also look http://msdn2.microsoft.com/en-us/library/ms143694.aspx
    but in case of SAP Installation i prefered that to upgarde SQL2000 to SQL2005  then install solman 4.0
    regards,
    kaushal

  • Can we run 11g RAC and 12c RAC in the same server?

    There is a requirement to run 11g RAC and 12C RAC in the same server for a year or so and then remove 11g RAC?
    Current setup:
    HP-unix 3 node RAC on 11g R2
    4CPU
    64 GB RAM
    3 TB SAN storage
    no ASM
    Upgrade setup:
    HP-unix 3 node RAC on 12C RAC
    8CPU
    128 GB RAM
    6+ TB SAN storage
    ASM
    We are asked to use the same server and upgrade Hardware to install and run 12C RAC. What are the implications of running RAC in the same server/nodes?
    Thank you for your time!

    Hi,
    The following table shows you the compatibility between various versions:
    Clusterware
    ASM
    DB
    Certified
    12.1
    12.1
    12.1
    Y
    12.1
    12.1
    11.2(a)
    Y
    12.1
    12.1
    11.1(a)
    Y
    12.1
    12.1
    10.2(a)
    Y
    11.2
    11.2(b)
    11.2
    Y
    11.2
    11.2(b)
    11.1
    Y
    11.2
    11.2(b)
    10.2
    Y
    11.1
    11.1
    11.1(c)
    Y
    11.1
    11.1
    10.2
    Y
    11.1
    11.1
    10.1
    Y
    11.1
    10.2
    11.1
    Y
    11.1
    10.2
    10.2
    Y
    11.1
    10.2
    10.1
    Y
    11.1
    10.1(d)
    11.1
    Y
    11.1
    10.1(d)
    10.2
    Y
    11.1
    10.1
    10.1
    Y
    10.2
    10.2
    10.2
    Y
    10.2
    10.2
    10.1
    Y
    10.2
    10.1(d)
    10.2
    Y
    10.2
    10.1
    10.1
    Y
    10.1
    10.1
    10.1
    Y
    (a) Pre-12.1 database instances require an ASM instance resident on the same node as the database instance. Pre-12.1 database instances cannot leverage the implicit HA of Flex ASM.
    Oracle Clusterware (CRS/GI) - ASM - Database Version Compatibility (Doc ID 337737.1)

  • Co-Locate Client Access and Edge Transport Role on Same Server?

    Co-Locate Client Access and Edge Transport Role on Same Server?
    Is it possible/supported to install the Edge Transport Server Role on the same machine that the Client Access role is installed on now that 2013 SP1 has added support back in for the Edge Transport Role?
    jon

    No.
    Unless something has radically changed from before...
    EDIT
    No, nothing has changed:
    "If you want to install the Exchange 2013 Mailbox or Client Access roles on a computer, see
    Install Exchange 2013 Using the Setup Wizard. The Edge Transport role can't be installed on the same computer as the Mailbox or Client Access server roles."
    http://technet.microsoft.com/en-us/library/dn635117(v=exchg.150).aspx
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Lync 2013 and SQL 2012 on the same server

    Hi,
    I'm in the process of migrating Lync 2010 to Lync 2013.  I have a clean install of Windows Server 2012 R2.  Is it possible to install Lync 2013 and SQL 2012 on the same server or does it have to be on separate servers.
    Thanks
    P

    Configure Separated SQL Server to use in an Enterprise deployment of Lync Server. Standard Edition servers use a collocated SQL Server Express version of SQL Server that is right sized for the workloads of a Standard Edition server.
    Also you can refer below link
    http://technet.microsoft.com/en-us/library/gg425848.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

  • Problems with Sent mail and multiple accounts on the same server

    I have 2 different email accounts that are on the same server. Regardless of the account from which I send the email, all of the sent messages end up in the same sent folder. Is there a way to force the sent messages to go into their correct Sent folder?

    In the Finder, go to ~/Library/Mail/. With that folder open, do Edit > Select All (⌘A), then Edit > Copy (⌘C), and paste it in your reply to this post, to let me see the names of the files and folders present at the root level of the Mail folder.
    Before actually posting that information, you may edit it so that the file/folder names do not reveal any details you wish to keep private, e.g. you may replace any real username with "username" to hide your real email address if you wish; similarly, you may disguise any domain names you don't want to be revealed. Try to be consistent in how you disguise those details, though, as we may need to refer to them in subsequent posts.
    Now, go to ~/Library/Mail/Mailboxes/. With that folder open, repeat the process to let me see the names of the files and folders it contains. Again, you may disguise any mailbox names you wish to keep private. Be careful to not alter any suffixes, though.
    Finally, for the two accounts involved in the problem, locate the account folders within ~/Library/Mail/ -- their name begins with the account type (POP, IMAP, Mac), followed by the account username and the incoming mail server. For each account folder, repeat the process to let me see the names of the files and folders it contains.
    Note: For those not familiarized with the ~/ notation, it refers to the user's home folder. You can easily locate any of the folders referred to in this post by copying the file path here, doing Go > Go to Folder in the Finder, and pasting the file path there.

  • How do I setup RFC if Solution Manager and Target system are in same server

    Dear Experts,
    How do I setup RFC if the Solution Manager and the Target System (SAP ERP 6.0) are sitting in the same server?
    Do I really need to setup RFC?
    regards,
    Abraham

    Hello,
    An RFC is a Remote Function Call and is used to communicate between computer systems.
    A system can be on a server. Multiple systems can be on a single server, a single system can exist on multiple servers.
    When you setup the RFC Target it is the Host and not the system that is specified.
    You can get the host information when logged into the ERP system by running transaction SM59.
    This would then be the target Host in the RFC from Solman to the ERP system.
    As Miguel suggested this is rather simple. So I hope this has shone a light for you so you may proceed.
    But if you continue to have problems please advise.
    Regards,
    Paul

  • Can I install 9i database  and  9i AS on the same server ?

    Dear Forum,
    We need to install Oracle 9i database(9.2.0.1.0) 64-bits
    and Oracle 9i Application Server (9.0.2.0.1) on the same Server machine with the following features:
    Machine: SunFire 6800, 4 CPU, 8 GB RAM
    OS: Solaris 9 8/03
    Is it possible?
    Will we have problems or conflicts with the ports numbers?
    Please, any aditional comments or recommendations will be welcome!!!!
    Best regards,
    Alfredo

    Hi Alfredo,
    If you are planning to install an infrastructure as part of your application server, you might run into a port conflict for the TNS listener. The easiest way of solving this is to move the non-infrastructure database listener to another port.
    A number of things like these are handled automatically in later releases. You do know that 9.0.2 is old and desupported, right?
    Regards,
    Mathias

  • FMS 3.5 on Server 2012 R2 and with Wowza on the same server

    Hi there,
    Is it possible to have my old FMS 3.5 on the same server as I have Wowza 3.6 installed?
    The server is windows Server 2012 R2.
    I have installed the FMS, but it does not start up after installation, and the bat-files cannot start/stop the service either. It doesn't make a difference if I go to Services to start them up manually, the sample files still doesn't work.
    Any suggestions?
    Thanks in advance
    HC

    Hi Hans Christian RVN,
    FMS 3.5 is not supported on Win 2012 R2. You may want to give it a spin on the supported platforms listed at https://www.adobe.com/support/documentation/en/flashmediaserver/357/FMS_357_Release_Notes. pdf.
    ~Ashish

  • SCCM - Branch Distribution point and Management point on the same server

    Hi All,
    Would like to know if any other SCCM roles like management point , distribution can be installed on the same server on which a branch distribution point is installed?
    Rgs,

    Hi,
    Branch Distribution Points no longer exist in Configuration Manager 2012 and above.
    I'm assuming you want to install additional roles on an existing server that is currently only acting as a Distribution Point and the answer is yes, this is possible, but it depends on which other roles you want to install and there will probably be some
    prerequisites needed.
    Can you elaborate on which roles you are considering installing? 
    Steven Hodson | http://www.stevenhodson.com | @_hodders

  • Mobile devlopment workstation and Mobile client install on same server

    Hi,
    Can we install Mobile development workstation and mobile client on same server?
    I have already installed mobile development workstation , but when i try to install mobile client on same server it says that add,remove ,modify option install screen. It lis not allowing me to enter new screen.
    Any idea.
    - tom

    When you install the MD Workstation you are opted to choose among different applications i.e. mobile sales, mobile service, mobile system maintenance or authorization management tool. You can there choose the application to install besides the installation of the MD Workstation.
    If you want to add application(s) later, you have to choose 'modify' and choose all parts for the MD Workstation plus the applications. If you omit options chosen before when doing the first installation then these will be removed. So be shure to choose ALL relevant things for the application as well as for the MD Workstation.
    You can also generate the application from the installed repository, there are several notes on this subject available ('how to generate an application') which are referred to in about any installation guide or note changing the msa coding.
    Regards Kai

  • Installing OAS 10.1.3 and Database 10.2 on same host

    I am trying to install 10g R2 and OAS 10.1.3 on same host(linux 2.6.9.-11.ELS). Database installation went fine but OAS is not coming up. Netstat shows all the ports are used. I followed all the instructions for Database and OAS. Is this a 2 tier configuration? Where can i find the OAS system error logs?
    Thanks in advance.

    Hi,
    I've a couple of questions for U;
    Which kind of installation of the IAS u did (Mid or Infra & mid)?.
    Did U install the IAS on a different file system than the DB?
    Ok. U 've a different places for the IAS log files, most important thing is that
    under /opmn/logs.
    To see the status of your ias process
    just login as ias owner with the right environement variables
    on the prompt type in
    #opmntctl status
    if some of your processes 're not alive, U can start it as following:
    # opmnctl startproc process-type= (process-type)
    U can stop & start all your opmn processes by type
    # opmnctl stopall of startall
    To start iasconsole
    # emctl start iasconsole
    've a nice day
    Regards,
    Hamdy

  • Need urgent on installation of Spatial and R12 data in the same server

    Hi
    This is Hanumantha. I am getting problem with Geo Spatial data type objects manuplating from Apps.
    Geo spatial data is installed in Navteq database in one server. R12 application is installed in another server. Through data base link in APPS, I am able to access Navteq tables data, procedures etc. But I can't manuplate the objects data like Varrays and object types from apps throgh db link from navteq.
    Instead created the procedure which will decompose the object type to "primitive types" (number, date, varchar2,.) which is accessing from apps. But hz_locations , Geometry column will have data type SDO_GEOMETRY and I cant update with primitive data type (number, date, varchar2..).
    Kindly please help us reconstucting to the SDO_GEOMETRY object using primitive data types.
    OR
    Is there any possiblity of installing Navteq database(GeoSpatial data) and R12 applications data together in the one server.
    Could please any help on the above as soon as possible?
    Thanks in Advance.
    Thanks,
    Hanumantha

    Could you give me an example of this update rutine?

  • Internet Sales ISA (R/3 Edition) and SAP EP on the same server ?

    We already have an SAP Portal (SAP EP) in place and we are planning to do a pilot deployment of the E-Selling R/3 Edition: is it technicaly possible to deploy then on the same SAP WAS server / cluster ?
    If yes, what would be the limitation or reason motivating not to do it.
    Thank you

    Thank you for your answer!
    How did you solve the SSO more specifically? You created an URL iView from scratch and assigned it to a specific system? Did you also to maintain any parameters or how did you get pass the login screen? Does that work automatically?
    Furthermore, did you use the link ".../b2b/b2b/init.do" as URL or some other? Because I once saw one ending differently...
    Kind regards,
    Christine

Maybe you are looking for