OAS 10g (10.1.2) Windows install -- different location for pagefile.sys

During installation of OAS 10g (10.1.2), by default the pagefile.sys on the C:\ is checked to see that it has at least 512 MB. The pagefile.sys on our Windows server is located on a different drive. Is there a way to specify to the OAS installer to scan for the pagefile.sys on a different drive?

Hi,
Do you get this error when you try to run forms configured using OAS 10g 10.2.0.2.
We run a Web application using OAS 10g 10.2.0.2 and after leaving the application idle, more than half an hour, ora-12152 is displayed and the application is in a deadlock.
Can you please suggest any solution for the same.
Should the SQLNET.AUTHENTICATION_SERVICES= (NTS) be commented in sqlnet.ora file.
Sridharrs

Similar Messages

New Document Series for different locations for Production Orders

Hi Experts,
I have came across a scenario where we have to setup different Document Series for Different Locations. Actually the Company is having 2 units . First one is the factory itself and the second one is Subcontracting Unit to which the company sends the job work order . But there it wishes to track the productions processes and the Stock tracking Warehouse Wise for
this Second unit also . As Such I have created 2 locations and one warehouse for (RM,SFG,FG) for both the units.
The obvious requirement here is to maintain different Document Series for Productions orders for both the units .
Please guide me about how to overcome this scenario.
Thanks and Regards,
Pooja Singh.

Hi Pooja,
Yes. You can maintain different document series for production Order or any documents depending upon your business scenario. Let's say, you need to maintain Production orderu2019s of job work and sub contracting.
You can define this under Administration>System Initialization> Document numbering.
Select Production orders--> let say Factory first number 1, last number 199999, select current period indicator and update. Similarly for the subcontracting, in the name field, "work order", first number as 110001 or the way you desire, and then the last number.
Reards,
Senthil Maruthappan.

New thin aluminum keyboard has different locations for eject and volume

in fact I can not find a control for volume. the brightness is listed for F1 and F2 but in fact is f14 and 15, eject is both f12 and the eject button and the listed f10-12 for volume don't work on my tiger equipped G4. My previous keyboard died and it worked fine.

Install the keyboard update
<http://www.apple.com/support/downloads/keyboardsoftwareupdate12.html>
Some key functions are different. See:
<http://docs.info.apple.com/article.html?artnum=306169>

Hi I'm just wondering if someone can tell me how to specify a different location for my iphone backups in itunes on my pc?

Hi, I have a pc laptop with a partitioned hard drive, and my iphone back ups automoatically save to the C drive. I need them to save to the D drive instead, but dont know how to change the location of the backups.
Can anyone help?
Thanks, Mel

Yes, you can change the backup location. Read here:
http://ismashphone.com/2012/05/how-to-change-the-location-of-your-iphone-backup. html

Library can't be expanded through referencing different locations for media

Ok, Apple wants us all to be save and not to loose any of the contents we purchase through Apple TV. So it copies everything that is on your Apple TV to your iTunes library. This is a nice idea that, unfortunately, comes with a huge inconvenience: there is no way for us users to tell iTunes where to put, for example, those huge movie files. ITunes simply copies them into the iTunes library the second iTunes is connected to your Apple TV. What this does is filling up the library on your computer faster than you could imagine. Here is an idea: how about using a referenced file system instead. That way users can decide where iTunes should put those valuable Apple TV backup files freeing up all that hard disk space on your computer drive for more important stuff. You may ask, why don't we just move the entire library to an external drive, like Apple suggests? Because it moves everything to the external hard drive leaving my computer's internal drive with nothing but an empty iTunes library, which means I will always have to carry my external drive with me in order to get excess to my files. Well, I could, of course, create a new library on my Macbook and copy stuff I want from my main library (on my external drive) into that library (on my Macbook). Really? That's the most convenient way Apple can come up with: manually copying files between drives? How about an option that allows users to treat my newly created Macbook library like an iPot? That would allow users to decide which contents (playlists, movies, etc) will be synced with my main library on my external drive. Could it be so difficult? That way everything remains organized and in sync, and to get back to my original point, one saves all that valuable internal hard disk space.
Anybody out there that has a better idea?

I think what he is talking about is having the abilty to store and access ALL his ITUNES library while at home and a subset of it while he is on the road with his laptop. If this is the case, there is something you can try.
On the laptop, which I assume is your ITUNES host, point ITUNES at an external drive as its library. While you are at home, ITUNES will store and stream normally but will in fact be accessing an off board network drive for managing the actual data files. The "library" is kept on the host (the laptop) as an database file, but the actual data is NOT on the laptop but streamed to it automatically when at home.
When you are on the road and want to watch a subset of your library, what you can do is creat a separte folder on the desktop and drag into it a copy of the movie files that you want to watch while NOT connected to your physical library disk on your home network. You can copy any or all of the files in your ITUNES library and should to maintain a backup. You can then go to ths folder with the copies of your movies on your laptop and double click them. They will run "outside" of ITUNES. At least they do on my laptops. I do it all the time and it works just fine.
If you have a large ITUNES library, you should be backing it up to a separate physical drive in any case for your own protection. You can always rebuild ITUNES if you have the data files by dragging those files into a new instance of ITUNES. For content purchased from Istore, you will need to connect the "new" rebuilt ITUNES instance to the Istore to get it reauthorized but I have done it several times.

Web part shows in different location for certain users

I have a web part page that has three filter web parts (PerformancePoint) and a reportviewer web part. When anyone not in a view only group views the page the filters appear at the top of the page as they should. When anyone in a restricted
rights group (view only) views the page, the filters show stacked at the bottom of the page. The only thing I've allowed in the web part options is Connections. Everything else is unchecked. Additionally, there are no personal views.
I've tried re-creating the page and the behavior persists. I also renamed the page and it made no difference. If I take a user from the restricted group and put them in a regular group the page shows correctly. The restricted group has View
Items, Open Items, View Application Pages, View Pages and Open permissions. I don't know what else to try at this point so I hope someone has some ideas on what's going on. Thanks!

Hi BucksNBrowns,
It seems this restricted group users are lacking of some permissions on sytle file or resource file, please check if they have Style Resource Readers permission on Style Library.
http://technet.microsoft.com/en-us/library/cc262690(v=office.14).aspx
Thanks
Daniel Yang
TechNet Community Support

Can install Oracle 10g release 2 on Windows 2008 R2 Server 64-bit machine

Hi All,
Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.
Regards,
Rizi

Hi;
Can we install Oracle 10g Release 2 on Windows 2008 Server R2 for 64-bit machine? If yes then is there any patche requirement for this, So suggest me.Yes you can but you must use 10.2.0.5.0 version. Pelase check below note:
How to Install Oracle 10.2.0.5 on MS Windows 7 / Windows 2008R2 [ID 1173433.1]
Regard
Helios

Hardware Requirements for OAS 10g

Hi, everybody
I'm looking for the hardware requirements to deploy an OAS 10g web server on Windows Platform. Have somebody this info?
Thanks
Mensaje editado por:
alejoarlyahoocom

It is subtly different for each operating system and each combination of components. Since you are reluctant to tell us the operating system, I refer you to the documentaiton .... on the following page
http://www.oracle.com/technology/documentation/appserver.html
pick out the OS of interest, pull up the Installation manual, go to CHapter 4 "Requirements" to get sizing info, and perhaps even read Chapter 5 "Things You Should Know Before Starting the Installation" ...

RAID after Windows install on Z77A-GD65

Hey guys,
I've been looking around for a long time for a clear answer, but can't seem to really find one. I got three 3TB disks that I want to run in RAID 5, but I already have Windows installed and don't want to reinstall it.
I've read a lot about doing it via BIOS and UEFI not working properly or needing a lot of work before it works correctly, but no conclusive results or guides on how to do it. I've read and tried a few of the online guides that include registry changes etc., but none of those seem to work. I really just want to get the array working. If it's really just not possible, I wonder if it's possible to do when I install a new Windows (probably W10 by then), because again, I read stories about that and it's supposed to be possible, but the descriptions are too vague.
So, is it possible to RAID 5 my disks IN UEFI after installing Windows?
Thanks in advance!
Boeman

Is the windows installation on one of these disks?
RAID 5 needs initialization before it is first being used so it isn't possible to keep windows if it is on one of the disks being RAIDed.
I remember there was a way to change SATA mode from IDE to AHCI or RAID on the P45, but last experience I had with transferring windows(XP) from one disk to another with ghost did not work well. It did boot but network was disabled and Microsoft assistant told me I must reinstall windows.
There was also a procedure to migrate windows between different platforms for windows XP, but you had to "repaire" installation (rather clean Install) which is almost like clean Install without reinstalling other software.
Best start fresh as suggested by Nichrome, shortcuts always result in wasting more time.

Q: OAS 10g using 100% of my CPU

OS=WinXP
Single Processor
Hello!
I'm using OAS 10g on my laptop as my web server for my single user PeopleSoft HR installation. When I load the service "OracleOASProcessManager", my CPU utilization gets pegged at 100% and stays there. My laptop has a 1.73Ghz processor with 2GB RAM.
Does anyone have any recommendations for turning OAS so that it does not always consume so much of my CPU's resources?
Thanks!
-Bryan
null

Thanks for your reply, Jacco. I will check my log files. Which ones are most relevant? I noticed that my log files are quite large (see directory listing below). Perhaps my log settings are too high?
-b
C:\oracle\product\OAS\opmn\logs>dir
Volume in drive C has no label.
Volume Serial Number is 285F-3BB6
Directory of C:\oracle\product\OAS\opmn\logs
2006-05-18 05:11 <DIR> .
2006-05-18 05:11 <DIR> ..
2006-05-18 08:22 1,045 dcm-daemon~dcm-daemon~dcm~1
2006-05-18 08:29 3,148 HTTP_Server~1
2006-05-18 08:29 56,963 ipm.log
2006-05-18 08:29 8,772 OC4J~home~default_island~1
2006-05-18 08:29 155,050 OC4J~PeopleSoft~default_island~1
2006-05-18 08:29 480,114,044 ons.log
2006-05-17 22:53 1,536,002,155 ons.log.06-05-17_22_53_46
2006-05-18 05:11 1,536,000,400 ons.log.06-05-18_05_11_13
2006-05-18 08:29 958 service.log
2006-05-18 08:29 <DIR> states
9 File(s) 3,552,342,535 bytes
3 Dir(s) 1,010,249,728 bytes free

Why I have to install different adobe flash player

use two browsers, one Maxthon Browser, the other firefox. The Maxthon is used to viewing domestic webs, the latter foreign webs. I intsalled an adobe flash player. When I use Maxthon, it works well. but then I turn to Firefox, I just cannot open the flash on my jersey web, saying unavailable. Someone told me that I have to install another adobe flash player for Firefox. I did as told. and finally it works. but why I have to install different players for different browsers, how can I use just one that works both for Maxthon and Firefox or other browsers.

I'd never heard of Maxthon before, but after reviewing their site it looks like it's based on Internet Explorer. If that's the case, IE uses ActiveX technology, while all other browsers are plug-in based. Flash Player has two versions, one for IE (ActiveX) and another for all other browsers (Firefox, Opera, Chrome, etc.)
Chris

How do I select a different drive for my emails

I am trying to set up my mailbox on a different location/drive other than on the installation drive. This gives me access to the email should my system crash and makes backing up easier. I've been using windows mail but that is getting buggy now. So I decided to drive with a Thunderbird but I did not find an option (which was under maintenance in windows mail) for setting up a different location for holding the mail. Is this possible?

Move the entire profile.
http://kb.mozillazine.org/Moving_your_profile_folder_-_Thunderbird

CER PUB and SUB in Different Locations

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
I currently have two servers for CER, a pub and a sub. The customer wants to put these two servers at different locations for disaster recovery. I know exactly how to configure a Pub in Sub for CER but I'm wondering what are the network requirements for this type of design. I've been through all the Doc's on CER but I'm not finding anything. Any help would be appreciated. Thanks

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
I found the answer to my question in the install Guide.
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
Consider installing the standby server in a physically separate location from the primary server, and on a separate subnet not separated by a WAN link.” Hope this helps someone else in the future

Material for a single project spread across different locations

Dear Friends
my client is executinig trun key projects. One single project may be spread across different geographical locations. Say Project name is "PRJ001".
PRJ001 will be executed in Bombay, Hyderabad, Chennai.
There are 2 scenarios for procuring materail:
1. Since my these places are quite far away, I might procure material from a venodr near to these locations.
2. I might give PO to one single vendor to dispatch material to these different locations for project execution.
In the both the cases, how to handle material?
What will be best option? Should I create a storage location (my client stores material @ site as these projects run for years)?
I'm procurial material as Project Stock (Q).
Say Bomaby location needs 500 no. of material, Hyderabad location needs 700 no. of material, Chennai location needs 300 no. of material.
Now how do I ensure that the right material with right quantity is reaching respective project site?
In some cases, project runs in remote location. Where there won't be any connectivity/ access to system. In such cases, if the site engineer enters GR/ IR & activity confirmation in excel sheet & later on sends an e-mail with this excel sheet to the office. How can we upload it to the system so that it updates the required fields in the system?
Please give your suggestions.
I appreciate your support/suggestion .
Thanks

Hi Amaresh,
I think your Option no. 01 holds good for your requirement. You can define the corresponding Project sites in Chennai, Mumbai and other places as Storage locations. Better define Seperate storage locations for different site locations.
I think having a delivery schedule with the specific requirement quantities and the storage location should resolve your issue of handling different quantities for the same material. This you can discuss & sort it out with your MM consultant.
Hope this gives some idea.
Regards,
L.Balachandar

Mobile exchange at a different location?

I purchased a razr at a one location in Denver and I'd like to exchange at a different location for the new GS3 assuming they get some in tomorrow. I assume I can do this swap at any Best Buy? The reason being that I'll be in a different part of town and it will be much more convenient for me.
Solved!
Go to Solution.

Exchanges can be made at any location.
Dan K. | Mobile Specialty Stores
Any opinions expressed in this post are those of
the author and do not represent Best Buy Co., Inc.

OAS 10g (10.1.2) Windows install -- different location for pagefile.sys

Similar Messages

Maybe you are looking for