OAS 4.0.8.2 and Oracle 9i

hi
Our current setup has OAS 4.0.8.2 running with Oracle 8i database. Now, the DB is to be upgraded to 9i (9.2.0.0). Will the OAS 4.0.8.2 be compatable with 9i Database??
Is there any verison OAS that we can upgrade to??
thanks for any help

Problem solved.
I deleted OAS 4.0.8.2.0 and installed Web-to-go. Then I installed OAS 4.0.8.2.0.

Similar Messages

OAS 4.0 and Oracle 8i refuse to exec stored proced with more than 20 params

Hi,
I'm programming a web application with stored plsql procedures and Oracle Application Server.
I started using Oracle 8.0.5 and OAS 4.0. It was working fine until I needed to use dynamic plsql and decided to upgrade to Oracle 8i (8.1.7).
Some of my stored procedures have more than 20 input parameters and didn't supose any problem in the "old" installation, but now when I try to execute
them via OAS over Oracle 8i it returns an error as if the number of parameters I gave were incorrect.
Modifying the procedure so it has less than 20 parameters works fine.
In resume: with the same input form and the same stored procedure with more than 20 input parameters works under Oracle 8.0.5 but fails under 8i.
Any ideas why the newest version doesn't accept more than 20 parameters?
Thank you.
Miquel Salvà
[email protected]

Hi Martin.
So, as far as i understood is the step where data is loaded into database that is taking too long ?
Wich one of these is your cenario ??
Cenario 1
Step 1) Export product data as CSV fike
Step 2) 3rd party app parses data (some processing is done in CSV file) generating another (or overwritting the original) CSV file
Step 3) CSV file generated in step 2 is pushed to database using sqlloadr
Step 4) Some pos-loading transformation is done
Cenario 2
Step 1) Export product data as CSV fike
Step 2) CSV file is loaded into database using SqlLoader
Step 3) After sqlloader is finish, some post-load processing is done
Step 4) 3dr party transformation is done
I think your problem can be in loading that data into database.
Is the CSV file big?
you can fasten sqlloader using direct-mode, destination tables can be in nologging mode (faster) and with the right space allocated (avoiding segment alocattion overhead)
Best Regards
Rui Madaleno

BAM and Oracle application server 10.1.3???

Hi,
I would like to understand more about integration between BAM and OAS.
I remember I read a document that stated that BAM was included (or was integrated) as part of OAS 10.1.3, however I installed it and still don;t see how it is integrating with OAS.
Also, in one of the Tutorials it mentions this:
"Note –if you are using Oracle Application Server with opmn process, the following
additional files are required in the above path:
C:\OracleBAM\OC4J\opmn\lib\optic.jar
Copy the entire Application Server “opmn” directory to c:\oraclebam"
So... are there any additional steps for the OAS and BAM integration?
I am still learning BAM but mi goal is install it as part of EBS(order Manegemnet)-BPEL-OTM (oracle Transportation) integration installation I currently have.
If it can be integrated can it be done using iAS 10.1.2.0.2 instead?
Thanks

Its recommended that you should use same versions of OAS and Oracle BAM.
For integration between OAS components and BAM you can check BAM tech notes (http://www.oracle.com/technology/products/integration/bam/10.1.3/htdocs/1013_support.html#technotes)
Hoping it will help you.

Does OAS Enterprise manager console install when Oracle DB EM installed?

I installed Oracle database 10gR2 on my development machine. After that I installed Oracle Application Server 10g 10.1.3.1.0
Although I opted to install the EM component I don't think that it did install.
Here is the install readme found in OAS_HOME\install\readme.txt:
The installation of Oracle Application Server 10g 10.1.3.1.0 was successful.
These instructions are located in C:\OracleAS_1\install\readme.txt for your future reference.
You can view the status of the server with the following command:
C:\OracleAS_1\opmn\bin\opmnctl status
Access the Welcome Page with the following URL:
http://main:80/
Application Server Control Console is not running in this instance of Oracle Application Server. You can manage this instance remotely through another instance of Oracle Application Server that is configured to run Application Server Control Console.
Installation Details:
Installation Directory: C:\OracleAS_1
Installation Type: J2EE Server and Web Server
Installed Components: Oracle HTTP Server, Oracle Containers for J2EE (OC4J), and Oracle Process Manager & Notification Server (OPMN)
Instance Name: orcl.main
Administrator Username: oc4jadminIn the case of the database and the application server being on the same machine, should I be able to access two different EM consoles? If so then why can't I seem to access the OAS EM console (I can access the database EM).

Problem discussed and solved here:
Re: Not allow em console

Install Oracle Application server 10g and Oracle database 10g on same box

Hi Experts!
i need to install Oracle database and oracle application server on the same machine(windows xp).
when i install both of them and reboot the machine either oracle database or oracle application server fails...
i suspect that the problem might be due to two - ORACLE_HOME
let me know how i can resolve this issue.
Note: Oracle DB and OAS OPMN process run as a windows service.
after restart opmn fails
Many thanks in advance
-Raghav

Jacco, in spite of your ace :-) this time I cannot
completely agree with you:
I hope sincerely that this ace thing doesn't "scare" anyone from challengeing me. I can't know everything, even though this ace sign suggests it.
- things like ORACLE_HOME are also set in the system
environment settings. This may lead to conflicts;It does, therefore you should set them with the service (I figured the installer of Oracle would actually do that for you, but I hardly ever work with Windows)
- the database and AS have different versions of the
RSFs. The most recent AS version is using 10.1.0.5
RSFs, where the database uses 10.2.x. This leads to
conflicts.
- Port conflicts are common in the ONS area, however
this should not prevent startup and should not be
very likely at this point since all products use the
same inventory and it should have been checked for
ports that are in use.ons port conflics shouldn't precent startup, but other port conflicts can.
>
With the total of our posts the problem should be
resolved anyway ;)Exactly, as long as the reader has the proper knowledge to understand them ;)
(this feels like a post just to make sure that you know I respect your opinions and advices)

OCS (CMSDK) and Oracle Application Server 10.1.3

Hi,
Is CMSDK or OCS (Oracle Content Services) part of Oracle Application Server 10g 10.1.3?
Regards,
Jigar

Its recommended that you should use same versions of OAS and Oracle BAM.
For integration between OAS components and BAM you can check BAM tech notes (http://www.oracle.com/technology/products/integration/bam/10.1.3/htdocs/1013_support.html#technotes)
Hoping it will help you.

Incompatibility axis and oracle libraries

Hi,
I have built an application with JDeveloper 10.1.3.4. Include several Web Services Clients generated with JDeveloper. Besides, I have to include a several "jars" to realize an invocation to axis web service. These "jar" posses an embedded Web Service client axis.
I have read that a single application (EAR) cannot contain one Web service that uses Axis, and another that uses Oracle. Specifically, an Axis Web service calling out to another Web service via a Web services client created using JAX-RPC implementation is not support.
http://oracledoc.boyko.biz/web.1013/b14433/opensrc.htm
The problematic classes are:
Oracle Axis
jaxrpc-api.jar jax-rpc.jar
saaj-api.jar saaj.jar
orawsdl.jar wsdl4j-1.5.1.jar
In JDeveloper, I have not included the jar from axis (jax-rpc.jar, saaj.jar, wsdl4j-1.5.1.jar) and the application realize all invocations (Oracle an Axis) in a right way.
When I deploy de application in OAS 10.1.2 or OAS 10.1.3.4, application fails in any invocation. I have tested several posibilities but at the end deployed application failed.
a) Including only "jaxrpc-api.jar", "saaj-api.jar", "orawsdl.jar"
b) Including only "jax-rpc.jar", "saaj.jar", "wsdl4j-1.5.1.jar"
c) The six jars (axis and oracle)
¿Could you say me as the way to avoid this problem in an OAS? ¿Why runs perfectly in JDeveloper althoug I haven't set the jar required by axis?
Thank you,

yes we have a standalone version of 10g being converted to RAC mode..
old version
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
converted to
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
i understand the binaries would be different, but are the libraries different too?

Select query differences between oracle 9 and oracle 8.

Hi,
I have a problem using the select query between oracle 7 and oracle 9i I don't have the same result :
ex:
With oracle7
SQL> select 'champ1','champ2' from DUAL;
'CHAMP 'CHAMP
champ1 champ2
With Oracle 9
SQL> select 'champ1','champ2' from DUAL;
'CHAMP1' 'CHAMP2'
champ1 champ2
So Can someone tell me how to solve this problem ? Is there a parameter in oracle 9 to set?
Thanx.

Whenever you are posting anything over internet forums like this - you should be very careful about not just posting the details which requires to solve the problem - also should be sensible about your question.
This is not at all desired when you are posting such question. It may be because - you may not well aware of the fact.
My suggestion is -> First Go through the basics Of SQL in general.
Then go for any specific product like Oracle/ SQL Server/ Sybase etc.
And, finally learn the advanced commands of that DB.
You asked it - may be you thought the difference in output in terms of lines. But, that is not your actual output. That is the graphical display part only.
Anyway,
You can get the quite familier output by first type the following command ->
set lin 310Regards.
Satyaki De.

Oracle Single Sign on and Oracle Internet Directory

Hello Gurus,
What is the relationship between Oracle Single Sign on and Oracle Internet Directory.
To my understanding, OID is required to install SSO.
If OID already exist, can we just install SSO and go on integrating it to existing OID.
Great Thanks,
vimal jain.
[email protected]

Hi Tim,
I've been working on this and could reproduce the issue with anonymous binds. A fix will be ready in 4.2.1.
So what I really need is the password used for login to pass to the is_member call.The P101_PASSWORD item does not save state. However, you can access the value during submit processing of the login page, for example in the post authentication function of your authentication scheme. People sometimes put code in there to query the user's groups (e.g. with apex_ldap.member_of2) and save them in an application. This item value can then be used in the authorization schemes.
Regards,
Christian

Oracle Spatial and Oracle Forms

Hi,
Does anyone have experience with Oracle Spatial and Oracle Forms?
I have generated a form, which is based on a view. The view uses the mdsys.sdo_relate operator. Somehow I am unable to get the form to perform (to get one record it takes over 20 minutes). While useing sql-navigator to process the same statement it seems no problem. The query that also uses the view, is then processed in 10 seconds.
I also noticed that when text-functions like ' lower' of ' upper' are used to query the view, the query is processed within 15 seconds. If I don't use ' lower' or ' upper' it takes a long time (> 20 minutes) to process the query. Is it possible that this causes the bad performance of the form?
On metalink I have found that forms and spatial do not cooperate because of the pl/sql version that
forms6 uses. There is no solution presented, does anyone know of a work around?
My configuration is:
Oracle 8.1.7 on WIN2K @ PIII-800Mhz 256 Mb memory.
Formsbuilder 6
If requested I can post the queries that I have made.
With regards,
Gerjan Walrecht
[email protected]
null

Hello Priya,
Look into the following.
1. Book - Pro Oracle Spatial for Oracle Database 11g by r. Kothuri, A. Godfrind, E. Beinat. This book provides a nice introduction on Oracle Spatial concepts and have examples.
2. Look at the Oracle Spatial & Graph User Guide
2. Book - Applying and Extending Oracle Spatial by S. Greener and S. Ravada. This book provides hands on information for advanced oracle spatial application developers. Practical guide on hands-on examples, Data models and develop cross-vendor database solutions.
3. This oracle spatial forum, once you understand these concepts.
In the future consider Certification on Oracle Spatial 11g Certified Implementation Specialist.
Best
Navaneet

Oracle Streams b/w MS-Access 2007 and Oracle 10g.

Can we set up Oracle Streams between MS-Access 2007 and Oracle 10g? Ms-Access as source and Oracle 10g as destination database. If so, can any one please give me little heads up with supported doc's or any source of info.

Help Help....!!!

Limitation on SQL executing select statement from ADO and Oracle 8.1.7.1 OleDB Driver

Hi,
we are running a query with a big dunamic select statement from VB code using ADO command object. When Execute method is called system hangs and control won't return back to the application. it seems to be that there is some type limitation on Query string length. Please tell us if there is any?
we are running Oracle 8.1.7 Server on Windows 200 Server and connecting from a W2K professional, ADO 2.6 and Oracle OLEDB 8.1.7.1 OLEDB Driver.
Sample code:
Dim rs As ADODB.Recordset
Dim cmd As ADODB.Command
Set cmd = New Command
With cmd
.CommandText = ' some text with more than 2500 characters
.CommandType = adCmdText
Set rs = .Execute
End With
when i debug using VB6 and when .Execute line is called system hangs or return a message method <<somemethod> of <<some class name>> failed error.
Any help is appreciated.
Thanks,
Anil

A stored procedure would only slow you down here if it was poorly written. I suspect you want to use the translate function. I'm cutting & pasting examples from the documentation-- a search at tahiti.oracle.com will give you all the info you'll need.
Examples
The following statement translates a license number. All letters 'ABC...Z' are translated to 'X' and all digits '012 . . . 9' are translated to '9':
SELECT TRANSLATE('2KRW229',
'0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ',
'9999999999XXXXXXXXXXXXXXXXXXXXXXXXXX') "License"
FROM DUAL;
License
9XXX999
The following statement returns a license number with the characters removed and the digits remaining:
SELECT TRANSLATE('2KRW229',
'0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ', '0123456789')
"Translate example"
FROM DUAL;
Translate example
2229
Also, LIKE '%<string>%' is going to be rather expensive simply because it has to compare the entire string and because it forces full table scans, rather than using indexes. You could speed this sort of query up by using interMedia Text (Oracle Text now in 9i). If you can eliminate one of the '%' options, you could also improve things.
My guess is that your stored procedure is inefficient and that's causing the problem-- 5k rows per table should be pretty trivial.
If you post your query over on the PL/SQL forum, there are better performance tuners than I that might have more hints for you. To get really good advice, though, you'lllikely have to get at least the execution plan for this statement and may need to do some profiling to identify the problem areas.
Justin

New to XML and Oracle

Just trying to clarify some issues as I try and learn about XML, and specifically how it integrates into the DB.
1 - Is there a way with Oracle tools for me to get an XSD of an existing 9i relational schema? We are not currently using the XML DB, but our middleware developers would like to have an up to date XSD to use for their internal mapping.
2 - Is there any way that I can keep that XSD up-to-date automatically, so I get a new one whenever the schema gets updated?
3 - If I wanted to investigate storing XML docs within the DB in native XML format, I need to have an XML DB, correct? Is this DB construct maintained seperatelly from my "normal" relational schema? or are they kept in sync by Oracle?
I know these may all be real basic questions, but as I said, I'm new to XML and Oracle. I am reading as much as I can, but there are a lot of docs out there.
Thanks,
Mike

Hi
1. On my opinion such a tool doesn't exists. Some parts can be implemented elsewhere, but not as described by you... e.g. with XSU if you specify the parameter "withschema" the XSD of the executed statement is generated. Another example is to use DBMS_METADATA to dump the data dictionary in XML (but not XSD, of course you could write your own XSLT to do this transformation...).
2. -
3. If you use XSD-based tables the XSD and the relational model are stored separately in the data dictionary. Therefore if you change the XSD you have to drop/create the XSD-based table... no schema evolution yet.
Chris

SRM 4.0 Installation Master and Oracle Installation

Dear Members, I am trying to install SRM 4.0 in sandbox using the SRM 4.0 Installation Master DVD. The question I have is does this installation take care of Oracle Installation also or should I install Oracle 9.2 first and then use the SRM Installation Master DVD to install the SRM. I am using SRM on Linux and Oracle. Appreciate expert advice. Thanks in advance.
Best Regards
Gabriel

I installed ORACLE 9x (only software) on Linux and also installed SAP SRM 4.0
When I try to start the oracle db, i get the following error message..
Trying to start ORASR2 database ...
Thu Aug 9 21:08:39 UTC 2007
checking required environment variables
ORACLE_HOME is >/oracle/SR2/920_32<
ORACLE_SID is >ORASR2<
Thu Aug 9 21:08:39 UTC 2007
check initora
Thu Aug 9 21:08:39 UTC 2007
check initora
Thu Aug 9 21:08:39 UTC 2007
starting orasrv
/oracle/SR2/920_32/bin/orasrv missing or without set-user-ID bit. Terminating.
./startdb: Terminating with error code
can someone help identify what the problem could be

Problem with Java 5 and Oracle 10g JDBC driver

Hi All,
Currently we upgrade our web application to Java 5 and Oracle 10.2 JDBC driver. And we encountered a bug, when the user entered the information through UI and data didn't store into database (Oracle 9i). The problem is that this bug is not happend so often maybe once a day and this did not happen before we upgraded to Java 5 and Oracle 10.2 JDBC driver. Does anyone encounter the same problem ? Is this Java 5 problem or Oracle JDBC driver problem ?
Thanks,

sounds like a database problem...
Are you using a driver version that's supported for your database engine?
What else did you change? We once ran into a major bug in our application that had for 5 years been masked by performance problems in our hardware and infrastructure.
Once those were resolved the bug showed itself and caused tens of thousands of records to be erroneously inserted into our database every day.
It's certainly NOT a problem with your JVM (if it's a decent one, like the Sun implementation).
So it's either your database, your driver, your network (dropping packets???), or your application.
The upgrade may just have exposed something that was already there.

OAS 4.0.8.2 and Oracle 9i

Similar Messages

Maybe you are looking for