OAS 9.0.4.x upgrade to OAS 10.1.2.x / Portal 10.1.4
We are upgrading OAS 9.0.4.2 with BI & Forms to OAS 10.1.2x / Portal 10.1.4 under Sun Solaris 9 (SPARC 64) and there is some confusion about Note:416942.1: sounds like we need to upgrade to terminal release 9.0.4.3 before migration. There are some notes about applying 10.1.2.2.0 patch set to 10.1.2.0.x installation. It comes from one of my SRs that Oracle is planning patch set 3 for OAS 10g r2 for this summer. Does anybody have a tested sequence of patches for SPARC to go from 9.0.4.2 to OAS 10.1.2x / Portal 10.1.4?
Any comments will be highly appreciated.
Michael
Hi Andreas,
I have a following list of patches to apply. How close it is to yours?
1 Note:330472.1 RDA - Remote Diagnostic Agent Generic 4 Needed for prerequsite checks
2 2617419 Opatch utility for 10.1.2x "OAS Middle tier
OAS Infrastructure
OAS Repository
Developer Suite" Needs to be replaced in Oracle Homes
3 5901891 OCPU April 2007 OAS Repository (RDBMS) 9.0.4.2 sr 6336959.992
4 5875989 Oracle Application Server Products Family: Patch AS INTEGRATION & DS PRE-REQ CHECK ORAPARAM.INI FOR SOLARIS 10 CERTIFICATION Oracle Universal Installer 10.1.2.0.2 Needed only for flipper to run installer
5 B24468-01, B24469-01, B24470-01, B24471-01 OAS 10g r2 core 10.1.2.0.2 "OAS Middle tier
OAS Infrastructure
OAS Repository
Developer Suite" 9.0.4.2 sr 6336959.992
6 5488476 Oracle Forms Patch OAS Midtier 10.1.2.0.2 Note:415222.1
7 5365207 Portal Schema Validation Utility (SVU) OAS Midtier 10.1.2.0.2 Note:415222.1
8 B24907-01 Portal upgrade 10.1.4 OAS Midtier 10.1.2.0.2
9 "B34387-01
B34388-01
B34389-01" Identity Management Upgrade 10.1.4 OAS Infrastructure 10.1.2.0.2
10 4505133 RDBMS 10.1.0.5.0 for AS 10.1.2.0.2 or 10.1.2.1 "OAS Middle tier
OAS Infrastructure
OAS Repository
Developer Suite" 10.1.2.0.2 Needs to be applied to OAS homes before 10.1.2.2. If not applied CPU for 10.1.2.2 is missing files
11 4554352 RWCLIENT FAILS TO RUN THE REPORT TO SECURED REPORTS SERVER WITH JDK142_08 OAS Midtier 10.1.2.0.2
12 5255249 OID / LDAP client libraries are replaced with wrong ones and permissions changed by RDBMS update OAS Infrastructure 10.1.2.0.2 oidldapd Fails to Start With Various Symptoms Doc ID: Note:361800.1
13 4960210 OAS 10g r2 patch set 2 10.1.2.2 "OAS Middle tier
OAS Infrastructure
OAS Repository
Developer Suite" 10.1.2.0.2 Upgrades Portal to 10.1.4.1
14 5732133 Mandatory patch on the top of 10.1.2.2 Patch Set 10.1.2.2
15 2617419 Install Latest OPatch to all Oracle Application Server homes 10.1.2.2
16 5488476 Apply Forms Patch 5488476 on UNIX if Oracle Forms Installed 10.1.2.2
17 4700543 Oracle Web Cache patch for SSL 10.1.2.2
18 5922121 OCPU Apr 07 for OAS 10.1.2.2 "OAS Middle tier
OAS Infrastructure
OAS Repository
Developer Suite" 10.1.2.2
19 5955554 OCPU Apr 07 for OAS 10.1.2.2 Discoverer 10.1.2.2
20 5955537 OCPU Apr 07 for OAS 10.1.2.2 Portal 10.1.4.1
Similar Messages
-
OAS 4.0.8.2 on NT - OAS not starting
I have installed Oracle8i (8.1.6),OAS 4.0.8.2 on NT 4.0 Server with SP5.
Then I logged into the Oracle Application
Server Manager, and tried to start "ALL" as mentioned in the documentation. I got the following message:
Site
Please wait while the command is being processed on host dgl ...
Starting ORB process...
waiting for ORB to be ready...
The command completed successfully on host dgl.
oassrv: Starting wrb service 0
Config Provider Server accepting requests...
oassrv: Starting wrb service 1
Log Server is accepting requests now...
oassrv: Starting wrb service 2
Web Request Broker (version:RM 4.0.8.2 Windows_NT 4 00):
Accepting requests.
oassrv: Starting wrb service 3
Unable to start a wrb service threads , Exiting...
OWS-08820: Unable to start oassrv process 'oassrv'.
Initialization Failure- Exiting OAS...
Execute STOP of all the OAS Processes from the OAS Manager
We would appreciate, if you could tell us, how to fix this problem.
Thanks,
ding guoli ([email protected])
nullHi !!!
I installed OAS 4.0.8.1 on Windows NT Server 4.0 with Service Pack 5 (June 1999).
I have a Oracle Database installed at the same machine (8.0.4 EE) because I installed OAS at other ORACLE_HOME. I follow the steps (workaround) showed at the document "Latest Oracle Application Server Release Notes. January 2000".
Hence, I created other user administrator for OAS and I put the entries for OAS at the User Path for this admin.
The system Path contains the entries for the database.
But, when I try to raise the process from OAS Manager, it happends the next:
Please wait while the command is being processed on host vnt05 ...
Starting ORB process...
waiting for ORB to be ready...
The command completed successfully on host vnt05.
oassrv: Starting wrb service 0
ConfigProvider Server accepting requests...
oassrv: Starting wrb service 1
Log Server is accepting requests now...
oassrv: Starting wrb service 2
Web Request Broker (Version: RM 4.0.8 Windows_NT 4 00 10/20/99 21:57:40):
Accepting requests.
oassrv: Starting wrb service 3
The WRB Authentication Host Server is now running.
oassrv: Starting wrb service 4
The WRB Authentication Engine is now running.
oassrv: Starting wrb service 5
Web Request Resource Manager Proxy is accepting requests.
oassrv: Starting wrb service 6
Initializing wrbmon ........................
OWS-08821: oassrv process 'oassrv' is started up at pid 119.
oassrv is accepting requests
OWS-08849: Waited 60 secs. Didn't receive initialization complete message.
OWS-08820: Unable to start wrksf process 'wrksf'.
Initialization Failure- Exiting OAS...
Execute STOP of all the OAS Processes from the OAS Manager
Any help will be appreciated.
Thanks. -
How to deploy forms and reports in the new upgradation of OAS?
Hi All ,
I have an application. In that I have Oracle Application Server - 10g release 1.
Now I have upgraded OAS to 10g release 2 .
1.what are the steps are needed to deploy the forms and reports in that newly installed OAS ?
2.Do I need to recompile all fmbs / mmbs / plls etc.,
4.Do I need to set any files like conf file ,env file ?
3.Is there any documents for this please provide the links ?
thanks All
sai
Edited by: user12045030 on Aug 24, 2010 6:58 AMUse a batch file for that:
@ECHO OFF
cls
Echo compiling libraries....
for %%f IN (*.pll) do frmcmp userid=%1 module=%%f batch=yes module_type=library compile_all=yes window_state=minimize
ECHO libraries compilation complete
ECHO ----------------------------------
Echo compiling menus....
for %%f IN (*.mmb) do frmcmp userid=%1 module=%%f batch=yes module_type=menu compile_all=yes window_state=minimize
ECHO menus compilation complete
ECHO ----------------------------------
Echo compiling forms....
for %%f IN (*.fmb) do frmcmp userid=%1 module=%%f batch=yes module_type=form compile_all=yes window_state=minimize
ECHO form compilation complete
ECHO ----------------------------------Francois -
Upgrade from OAS to weblogic server - Oracle reports impact
Hi Team,
We have quite lot reports are created in oracle reports 10g and used in production environment. We have plan to upgrade systems and i would like to know the impact in reports which are created using oracle reports 10g.
Currently, we are using
Oracle Database 10g
Oracle reports 10g
OAS 10g
and we are planning to migrate to
Oracle Database 11g
OAS -- > Weblogic application server.
Will my existing reports work in weblogic application server without any change? OR Do i need to change the existing reports.
Could somebody help me on this.
Thanks,
iqbal.Let me tell you, brother, it can be a real headache, starting with the upgrade process.
For example, I've Got x86 Solaris running on an old Dell box. Created a Boot Environment for my existing setup.
Now I'm trying to clone the Boot Environment so that I can do the Live Upgrade. However I'm getting an error when I use the lucreate command.
"# ls
TT_DB data format.dat mnt proc usr
bin dev home net rmdisk var
boot devices kernel nsmail sbin vol
cdrom etc lib opt test.txt~ xfn
core export lost+found platform tmp
# lucreate -n "solenv2" -m /:/dev/dsk/c0d0s3:ufs
Discovering physical storage devices
Discovering logical storage devices
Cross referencing storage devices with boot environment configurations
Determining types of file systems supported
Validating file system requests
Preparing logical storage devices
Preparing physical storage devices
Configuring physical storage devices
Configuring logical storage devices
Analyzing system configuration.
Comparing source boot environment <solenv1> file systems with the file
system(s) you specified for the new boot environment. Determining which
file systems should be in the new boot environment.
Updating boot environment description database on all BEs.
Searching /dev for possible boot environment filesystem devices
Template entry /:/dev/dsk/c0d0s3:ufs skipped.
luconfig: ERROR: Template filesystem definition failed for /, all devices are not applicable..
ERROR: Configuration of boot environment failed.
# lustatus
Boot Environment Is Active Active Can Copy
Name Complete Now On Reboot Delete Status
solenv1 yes yes yes no -
I presume I need to get a slice ready for the utility because the utility is not smart enough to really do any slicing itself.
Any ideas? -
OAS v10.1.2 Ultra Search - Page Group Missing When Setting Up Portal Data
Hi,
We're on version 10.1.2 but in the process of upgrading to 10.1.4.
In Ultra Search, when I try to set up a Portal Data Source, I can't see all the Page Groups in the portal. Is this somehow related to the ACL for the Page Group ... or individual pages? I can see most but not all, and specifically not the one I want.
Any suggestions would be great!I blundered onto the answer to my issue by trial and error.
When setting up the root page for a page group, if you wish it to be accessible to Ultra Search to be part of a Portal Data Source, you must ensure that the "Display Page To Public Users" check box is checked. The "Enable Item Level Security" checkbox can also be checked, e.g, they are not mutually exclusive. -
We have portal 3.0.9.8.0 running with 8.1.7.4.1
I need a good documentations for the followings.
1- upgrade database to 10G
2- upgrade Portal to 10G.
What I know that.
Even 8.1.7 database is supported to 10g, Portal is NOT.
1-I need to upgrade to portal 3.0.9.8.5 first.
2-Upgrade database to 9i (9.0.4)second
3-Upgrade to portal 9.0.xx
4-and finaly upgrade database and portal to 10G.
Please advise.
Many Thanks
LausanneIf portal is used with Oracle E-Business Suite 11i, then I suggest you have a look at section 3 (Installation or Upgrade of Portal) of note: 305918.1. It lists all the steps on how to move from portal 3.0.9 to portal 10.1.4
-
PT 8.51 Upgrade - How to find duplicate keys for Portal Registry Structure?
I am upgrading peopletools for two applications (CRM 9.00 and FDM 9.00) from the 8.48.10 to 8.51.11 versions.
For CRM, Task 4-15-9 Completing the Peopletools Conversion ran app engine PTUPGCONVERT ran smoothly.
For FDM, I have the following error messages:
The Navigation Pagelet does not exist. Portal = EMPLOYEE. Object = PT_SC_PGT_MAIN_MENU. Collection = PT_PTPP_PORTAL_ROOT (219,2083)
Message Set Number: 219
Message Number: 2083
Message Reason: The Navigation Pagelet does not exist. Portal = EMPLOYEE. Object = PT_SC_PGT_MAIN_MENU. Collection = PT_PTPP_PORTAL_ROOT (219,2083)
Duplicate key. Portal: EMPLOYEE, Obj Name: PT_SC_PGT_MAIN_MENU, Nodename: LOCAL_NODE, URL: s/WEBLIB_PTPP_SC.HOMEPAGE.FieldFormula.IScript_SCP (133,4)
PT_SC_PGT_MAIN_MENU already exists. (96,3)
Copy of the Main Menu Pagelet From PS_SITETEMPLATE to Portal: EMPLOYEE failed. (219,2111)
Message Set Number: 219
Message Number: 2111
Message Reason: Copy of the Main Menu Pagelet From PS_SITETEMPLATE to Portal: EMPLOYEE failed. (219,2111)
I checked table PSPRSMDEFN which does not have an entry for PT_SC_PGT_MAIN_MENU, under the Employee Portal. I tried to migrate the missing Portal Registry object using App Designer but again receive the "duplicate key" error.
So it seems that I have to find the duplicate key and resolve it before I can migrate the missing object.
Anyone know a quick way to figure out what the duplicate keys are?
ThanksI tried several things to find the duplicates with no success.
A couple of workarounds were attempted that resulted in the same "duplicate key" error, including:
a) Re-copying file project PPLTLS84CUR
b) Copy object 'PT_SC_PGT_MAIN_MENU" from Demo
After opening an SR, the successful workaround was to use Data Mover to export from Demo the "EMPLOYEE" portal entries for "PT_SC_PGT_MAIN_MENU" from tables PSPRSMDEFN, PSPRSMSYSATTR and PSPRSMSYSATTRVL. The import to the target upgrade environment was successful. A re-run of PTUPGCONVERT finished successfully.
The upgrade is progressing but where the duplicate keys are is still a mystery.
Cheers -
we have installed a OAS 10.1.3.0 on Linux. is it posble to install OAS 10.1.3.3 on the same server, is there any confliction?
if it posible, how can I change the port number for the 2nd OAS? or will it detect the port have been used and choose diffrent port? how do I install the 2nd one, should I install another OAS 10.1.3.0 and apply patch on it to upgrade to OAS 10.1.3.3?Thank you for reply.
but I have 2 things need to be clearified:
1. what's the purpose of "use the apache from 10.1.3.0 and use it to create oc4j mountpoints for your 10.1.3.3 installation"
2. in cureent download ,the 10.1.3.3 is avalible as a patch, should I install the 2nd 10.1.3.0 and then do upgrading to 10.1.3.3?
thanks -
RHEL 4 64bit OAS 10.1.2.2.0 and PHP5
I am trying to support php5 with OAS 10.1.2.2.0 and am having a problem compiling php. Doing a normal compile of php results in a 64bit executable which does not work with Oracle apache as it is a 32 bit executable. I have tried compiling php using 'setarch i686' and having LD_LIBRARY_PATH pointing to only 32 bit library paths, but it will not compile at all under these conditions.
I get the following error when trying to compile as a 32 bit executable
relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC
I have tried passing the -fPIC flag to gcc, but to no avail.This is on a RedHat Linux 4 platform, so no yum. I have followed the steps on the oracle site, but this results in a 64bit php binary. The Apache binary that ships with OAS is 32 bit, so it won't load a 64bit php binary. The configure line is:
./configure with-apxs=$ORACLE_HOME/Apache/Apache/bin/apxs prefix=$ORACLE_HOME --with-config-file-path=$ORACLE_HOME/Apache/Apache/conf
The steps I follow are as follows:
1. linux32 bash
2. export PERL5LIB=$ORACLE_HOME/perl/lib
3. export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib/:/usr/lib/
4. setarch i686 (to force gcc to think it is on a 32bit system and compile a 32bit php binary)
5. ./configure with-apxs=$ORACLE_HOME/Apache/Apache/bin/apxs prefix=$ORACLE_HOME --with-config-file-path=$ORACLE_HOME/Apache/Apache/conf
I don't need the oci8 support as I don't need oracle db support. My requirement is simply to run php5 under OAS 10.1.2.2.0 I also cannot upgrade to OAS 10.1.3, as there are other OC4J's running that require 10.1.2. -
Hi All,
I am upgrading from OAS 9.0.4 to 10.1.2 where Forms 10g application is deployed.
When I try to recompile with frmcmp.sh :
frmcmp.sh userid=system/oracle123@odb module_type=FORM module=menu1.fmb
I get errors :
Compiling Procedure GET_PATH...
Compilation error on procedure GET_PATH:
PL/SQL ERROR 201 at line 4, column 32
Identifier 'APPS_MENU1_DET' must be declared
PL/SQL ERROR 0 at line 4, column 3
SQL Statement ignored
Compilation error have occured.
Form not created
What cause this error ?
FYI, on the above compilation I connect to different database/schema, not the one
which is used by the Form, is this the reason of th error ?
During compilation, Do I have to connect to the database/schema I used when develop the form ?
DO I have to create all tables in the schema first before compilation ?
Tnank you for your hwlp,
xtanto
PS. When I compile the same Form with F90genm.sh on OAS 9.0.4, NO ERROR.From my experience it's a really bad idea to install OCS into a AS IM. When it comes to upgrades and patches you'll pull your hair out!
Why not install OCS first and then install the BI into the OCS AS server... I have not checked the certification matrix but that might be a better solution to look into. -
Forms 10g, OAS and Web Services.... help!
Hello,
We're in the middle of a project that was originally supposed to be a (simple :D) upgrade of an existing Forms 6i application to a Forms 10g application.
During the course of the project we have encountered various problems with the older forms (shakes fist at Headstart code...) and as a side effect have had to upgrade our OAS to 10.1.2.0 (10gR2). That's fine, however we have recently been looking into replacing the C++ code that the old application uses to connect to SAP with a new Web Services system, using the SAP Adapter and WSDLs and BPEL and all the rest of it (steep learning curve).
In setting that up it seems it would be advisable for us to upgrade to 10.1.3.x (or "get a headache" said Oracle Support...) However, I now read (in an article from July last year) that Forms and Reports are not supported in 10.1.3.x...
So, do we ask our DBAs to go ahead and install the SOA suite 10.1.3.x? And if so, do I need to do something else to support our !0gR2 forms? Or will they just work? Can we do a "clean" install of 10.1.3.x or do we upgrade the existing 10.1.2.0 system....? Colour me confused.
Help!
Thanks in advance
DanYou are correct, Forms 10gR2 is the latest and is not available on the 10.1.3 stack. I am also not sure if you are talking about writing web services or just consuming them. However you have 2 main options.
you can install 10.1.2 and use 10.1.2 for Forms and use 10.1.2 for your web services - this should work ok but of course you are "handicapped" by only being able to use 10.1.2 features of BPEL and WS.
Next option, you can install 10.1.2 for running Forms and run a separate 10.1.3 for running BPEL and SOA suite - nothing wrong with that. And if you write a web service and deploy to 10.1.3 you can call that from Forms.
Example of calling an external web service from Forms
http://groundside.com/blog/GrantRonald?title=live_demo_of_sending_an_sms_from_forms&more=1&c=1&tb=1&pb=1
http://www.oracle.com/technology/products/forms/forms_modernization.html - calling a BPEL process is just like calling a web services
http://groundside.com/blog/GrantRonald?title=oracle_forms_bpel_and_soa_hooking_forms_&more=1&c=1&tb=1&pb=1
Hope this helps
Grant -
Hi
Does anyone know if OAS4 is going to be released for
Linux in a reasonable amout of time? WAS3 is surely
a good start, but the limitation for JDK 1.0.2 in the
java cartridge is a heavy one...
Sam Jordan
nullI see many people complaining about OWAS Performance.
I don't know the exact reason but my OWAS installation is
really faster than an NT BOX (at least the PL/SQL Cartridge).
I'm connecting to Oracle8.0.4 EE on RS/6000 with AIX 4.3.
It's just perfect.
Probably some stupid problem with libraries...
Cheers,
Michael Daskaloff
P.S. To development team:
Thanks for the good job, and keep working on the Enterprise
Edition.
Yeah!
Michael H. Thomas (guest) wrote:
: Hi,
: >>Jim (guest) wrote:
: >>: You got that right. That is why I wrote all of my stuff
in
: >>: PL/SQL.
: (Note: Too bad if you did this for OWAS 3.0.2 for LINUX).
: When running PL/SQL code using OWAS 3.0.2 for LINUX there
: is a lag of up to 10 seconds in the listener response to the
: browser client. If you doubt this, please demonstrate your
: performance experiences with OWAS 3.0.2 on LINUX, and I'll
: post my test cases showing the lag.
: Oracle has (to my knowledge, in my opinion) never
'acknowledged'
: a performance lag issue with OWAS 3.0.2 as either a bug, or
: even a performance problem. But, hopefully they are working
: on this issue and will post a patch like they did for the
: 8.0.5 LINUX database:
: ftp://oracle-
: ftp.oracle.com/server/patch_sets/LINUX/80patchsets/80510/
: Therefore, in addition to the Java concerns, we would like
: to see upgrade to OAS 4.0.7 for LINUX just for our PL/SQL
: cartridge code.
: Regards,
: Mike Thomas
null -
OAS 4.0.8.2 and External HTTP Listener (NES)
We're about to upgrade to OAS 4.0.8.2 and want to find out which version of Netscape Listener that this OAS version is certified for (we used NES 3.62 for OAS 4.0.8.1)
Thanks.Problem solved.
I deleted OAS 4.0.8.2.0 and installed Web-to-go. Then I installed OAS 4.0.8.2.0. -
How can I use JSP with OAS 4.0.8 and the JServ cartridge.
nullHow can I contact jsolomon? [email protected]?
Regards,
Jean-Philippe Doucet
Oracle Java Technical Team wrote:
: You have to upgrade to OAS 4.0.8.1 to use the JSP
: implementation. The Oracle JSP implementation can
: also be obtained from www.olab.com. The download
: from www.olab.com provides installation scripts
: and samples for using JSP within OAS.
: Currently www.olab.com JSP download is password
: protected. Please contact jsolomon to obtain access.
: Karl P. Traar (guest) wrote:
: : Crille (guest) wrote:
: : : How can I use JSP with OAS 4.0.8 and the JServ cartridge.
: : I feel that there is no way to use Oracle JSP (ojsp) with OAS
: : 4.0.8. ojsp works fine for me with Apache 1.3.9 and Jserv
1.1b3
: : on NT on Solaris. It also works with the JSWDKK Web Server,
but
: : what about OAS? Could someone at Oracle answer this question?
: : My neighbour department is presenting a demo with JSP and
JRUN
: : tomorrow. I am using OAS and I would need JSP with OAS, say
: next
: : week. Please help ?
null -
OAS is slow when accessing on same machine
I have OAS 4.0.8.1 installed on an NT machine (4.0 sp6) on our network. When it serves pages to a browser on the same machine the response time is very slow (5-6 seconds).
The pages that I'm accessing are fine. When using a browser on another machine on the network the response is less than one second.
Memory doesn't seem to be the problem (256MB).
I've also tried modifying the Hosts file in \\winnt\system32\drivers\etc, with seemingly no affect.
The database accessed by OAS is 8.1.5 on another NT.
Any ideas?
Thanks,
EricThought I would reply to my own post in case someone wants to know the answer.
We ended up solving the problem by upgrading to OAS 4.0.8.2. Oracle agreed that this was a bug in 4.0.8.1 and would have a patch available (sorry - don't have the number). Regardless, we found that upgrading was easier.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Eric Christian ([email protected]):
I have OAS 4.0.8.1 installed on an NT machine (4.0 sp6) on our network. When it serves pages to a browser on the same machine the response time is very slow (5-6 seconds).
The pages that I'm accessing are fine. When using a browser on another machine on the network the response is less than one second.
Memory doesn't seem to be the problem (256MB).
I've also tried modifying the Hosts file in \\winnt\system32\drivers\etc, with seemingly no affect.
The database accessed by OAS is 8.1.5 on another NT.
Any ideas?
Thanks,
Eric<HR></BLOCKQUOTE>
null
Maybe you are looking for
-
hai, i created a smartform to display data from vbap. i looped the internal table t_tab. but when go for print preview values are not printing but field names are displaying like &w_tab-vbeln& &w_tab-posnr& &w_tab-netwr& i followed thw link <link
-
Windows 7 won't boot or run sfc /scannow - says repair in
I upgraded my HP laptop from Vista to Windows 7 and it has been working for a year. This morning the laptop will not boot up and when I run repair it runs it over and over and will not boot up. I run the diagnostics on the hard drive it gets to about
-
Were I can get the table of PIKMG
Dear Guru, I want to no from which table I can get the data of Pick Qty. When I go to VL02N Pick Qty, their I can find Structure : - LIPSD Feild : - PIKMG. But when I am searching in PIKGM I am not getting any data. So, will u help me to get the ta
-
Analysis authorization - Authorizing Characterstic Values
Hello all, We upgraded to BW (BI) 7.0 and thus have to use the new analysis authorization concept. While I have the documentation on how to create them and understand the, I'd like to know if there are any experienced users or experts who can assist.
-
Should the LabVIEW program be reduced to the speed of data collection?
I'm using a LabVIEW program created by Ocean Optics for a Spectrophotometer probe with is run through the USB port. The problem occurs when we attempt to collect data over a time frame of one second. For some reason the whole LabVIEW program will beg