OAS and Port 80
I followed the instructions here to change my server to Port 80. OAS 10g (9.0.4) on Windows Server 2003
http://download-west.oracle.com/docs/cd/B10464_05/core.904/b10376/ports.htm#i1040069
From my windows XP machine in my office, my website works fine. I switch to my linux box and I get intermittent results. (the site sits and does not load, or loads some times). Many clients on windows xp machines cannot access the site. It is an apex site running on OAS, and I created a static test page which they cannot access at all. I am currently waiting for our support contract to be settled with metalink, but I am kinda at my wits end here, and need results, and that is why I turn to the forum. I am about ready to wipe the machine and start over to see if maybe my futzing around screwed something up. Any help on this matter would be greatly appreciated. I will give access to the URL if anyone that can help.
Thanks,
Scott
Hi, I'm a friend of Scott's.
I tried hitting the URL Scott gave me, and I was consistently succeeding from my Windows workstation using Firefox, while consistently failing (page timed out) on my Linux workstation. I tried both Firefox and Konqueror browsers on Linux. Windows succeeded 100% of the time on 10 attempts - Linux succeeded 0% of the time on even more attempts. Note that I work at a different company that is external to Scott's network.
I don't know anything about OAS - I just thought I'd throw my odd test results into the conversation, to clarify what Scott is talking about.
Mark
Similar Messages
-
I have successfully installed OAS 4.0.8.1 on Linux RedHat 6.1. The default (oracle) http listner runs fine, after setting it to port 81. I did this because the default http server for Linux (Apache 1.3.9-4) is on 80. I would like to use Apache as my http listner, and have found some documentation on how to do this at http://www.olab.com/doc/books/admin/thirdp.htm, but am a little confused with the instructions. It states that Apache must be compiled with mod_so support. I have verified that this is so with the "httpd -l" command. Before that, it mentions that...
"libapadp.so must be linked into the Apache HTTP Server." Can anyone tell me how this is done, and with which version of Apache should be used? 1.3.6 seems to be a popular one and is mentioned in the Oracle Application Server Installation Guide for Release 4.0.8.1 in Certified Software.
I have tried to move libapadp.so and ndwfapd.so into the /modules subdirectory my Apache install (once again 1.3.9-4) and adding "LoadModule ows_module ndwfapd.so" in my httpd.conf file, but when the server tries to start, I get the error message...
"Cannot load /etc/httpd/modules/ndwfapd.so into server:libapadp.so: cannot open shared object file:No such file or directory"
Has anyone run into this problem? I imagine many people have done this. As I am new to Linux and OAS and Apache, maybe I'm missing something fundamental that I haven't learned yet, but hey, isn't this what learning is all about?
If anyone can help me with this hurdle, I would greatly appreciate it.
Thanks in advance,
KirbyHi Guys,
I am pulling my hair out with this one too.
I tried to link the library "libapadp.so" to
apache using the Makefile in the source directory by adding the path and libapadp.so to the EXTRALIBS variable. It works in the
sense that it tried to link the lib but fails because there are a bunch of unresolved dependencies. As somebody else stated, Oracles documentation sucks. I ask for support and got sent here, I guess that they don't know how to make it work either.
Will let you know if I have any success.
Brett.
[email protected]
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Jason Gerry ([email protected]):
I've been working on this problem as well. I haven't got it to work YET, but I'm trying.
Your error message is relating to Apache not being able to find the shared module. You can fix this by telling it explicitly where to find it since it doesn't seem to be in the PATH.
LoadModule ows_module /opt/app/oracle/product/8.0.5/ows/4.0/lib/ndwfapd.so
Your directory structure may be different. In any case, this SHOULD work, my Apache listeners start up, but they don't actually respond to requests and they freeze the machine. Oh well.
Still working on it!
jason
<HR></BLOCKQUOTE>
null -
I have OAS on an NT4 box connecting into my Solaris cluster w/ 8i. I can hit my webpage local on the NT box but when I go to other boxes I can't see the page unless I take the proxy config out of the IE5 browser. Then I can't see the internet with those machines. Have tried to leave the proxy w/ the bypass button checked and putting the address in my host files no go. Is there a setting that I can change in OAS that will effect this..I know I can config my IE5 browser but I have alot to rollout to so that may be hard to do...It is only on an intranet but it resolves to the fully qualified net name ie:http://iam.here.com/ but will not resolve to http://iam/...Is this possibly a DNS issue or a OAS config issue... we are using a 8080 port setting on all outgoing www and ftp traffic but this should not effect internal traffic.
Thanks,
Ericif I have IIS for BI Pres Svcs and the BI Server is installed on OASNo -- you have the Presentation Services plugin installed on IIS OR OAS -- and that's all from an OBIEE point of view.
BI Server is a standalone binary (nqsserver) which runs outside of any application server.
I can point BIP to the OAS on BI Server?You would install BIP on OAS. However - I don't know how the security integration would work, or if it would. Sorry.
Maybe someone else here will be able to help, or you could try the BI Publisher forum? -
Visual Voicemail gone after upgrade to 2.0 (and porting number)
Anyone else experience this? I upgraded to 2.0 and at the same time I ported the old iPhone to another cell phone number on my account with ATT. The upgrade to 2.0 and porting appeared to go OK as everything else is working EXCEPT when on the phone application, I can not get the visual voicemail button to do anything. I press it and it acts like it is taking some time to open but it never brings up the visual voicemail screen. The phone part works as usual in all other ways.
I upgraded to the pre-release version of 2.0 and it worked fine. Then this morning i tried to update to the official 2.0 and it could not connect to iTunes, and that pinwheel kept spinning. So I pressed home button and power button until it (iPhone) rebooted. Then i connected it to iTunes and it asked me to restore.... So i pressed the option key (in mac, idk what it is in windows) and selected the prerelease version to downgrade to and now its fine. So...... good luck all
-
Hi
I have installed coheI have installed coherence server "fmw_12.1.3.0.0_coherence_Disk1_1of1.zip" along with Examples on windows machine and C++ client coherence-cpp-12.1.3.0.0b51709-windows-x86-vs2012.zip on the same machine.
I have built the "contacts" C++ Example successfully and while I execute this "contacts" using run I am facing TcpAcceptor error.
On my coherence server the TcpAcceptor is listening on port 8088, so I have modified the extend-cache-config.xml file with values "ip address of my windows machine" and port as "8088".
All the time I am getting below error,
coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpAcceptor
at class coherence::lang::TypedHandle<class coherence::component::net::extend::PofConnection> __thiscall coherence::component::util::TcpInitiator::openConne
ction(void)(TcpInitiator.cpp:307)
at coherence::component::util::TcpInitiator::openConnection
at coherence::component::util::Initiator::ensureConnection
at coherence::component::net::extend::RemoteCacheService::openChannel
at coherence::component::net::extend::RemoteService::doStart
at coherence::component::net::extend::RemoteService::start
at coherence::component::util::SafeService::startService
at coherence::component::util::SafeService::restartService
at coherence::component::util::SafeService::ensureRunningServiceInternal
at coherence::component::util::SafeService::start
at coherence::net::DefaultConfigurableCacheFactory::configureService
at coherence::net::DefaultConfigurableCacheFactory::ensureService
at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
at coherence::net::DefaultConfigurableCacheFactory::configureCache
at coherence::net::DefaultConfigurableCacheFactory::ensureCache
at coherence::net::CacheFactory::getCache
at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void> >::sizeOf(bool)
at _onexit
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at BaseThreadInitThunk
at RtlInitializeExceptionChain
at RtlInitializeExceptionChain
on thread "main"
Caused by: coherence::net::messaging::ConnectionException: coherence::component::util::TcpInitiator::TcpConnection@029EAD78{Id=NULL, Open=1, LocalAddress=NULL,
RemoteAddress=10.242.152.242/10.242.152.242:8088}: socket disconnect
at class coherence::lang::TypedHandle<class coherence::net::messaging::Response> __thiscall coherence::component::net::extend::AbstractPofRequest::Status::g
etResponse(void)(AbstractPofRequest.cpp:203)
at coherence::component::net::extend::AbstractPofRequest::Status::getResponse
at coherence::component::net::extend::AbstractPofRequest::Status::waitForResponse
at coherence::component::util::Initiator::openConnection
at coherence::component::net::extend::PofConnection::open
at coherence::component::util::TcpInitiator::openConnection
at coherence::component::util::Initiator::ensureConnection
at coherence::component::net::extend::RemoteCacheService::openChannel
at coherence::component::net::extend::RemoteService::doStart
at coherence::component::net::extend::RemoteService::start
at coherence::component::util::SafeService::startService
at coherence::component::util::SafeService::restartService
at coherence::component::util::SafeService::ensureRunningServiceInternal
at coherence::component::util::SafeService::start
at coherence::net::DefaultConfigurableCacheFactory::configureService
at coherence::net::DefaultConfigurableCacheFactory::ensureService
at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
at coherence::net::DefaultConfigurableCacheFactory::configureCache
at coherence::net::DefaultConfigurableCacheFactory::ensureCache
at coherence::net::CacheFactory::getCache
at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object
,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void
,void,void,void> >::sizeOf(bool)
at _onexit
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at BaseThreadInitThunk
at RtlInitializeExceptionChain
at RtlInitializeExceptionChain
on thread "main"
Caused by: coherence::io::IOException: socket disconnect
at unsigned int __thiscall coherence::net::Socket::readInternal(unsigned char *,unsigned int)(Socket.cpp:333)
at coherence::net::Socket::readInternal
at coherence::net::Socket::SocketInput::read
at coherence::io::BufferedInputStream::fillBuffer
at coherence::io::BufferedInputStream::read
at coherence::component::util::TcpInitiator::readMessageLength
at coherence::component::util::TcpInitiator::TcpConnection::TcpReader::onNotify
at coherence::component::util::Daemon::run
at coherence::lang::Thread::run
on thread "ExtendTcpCacheService:coherence::component::util::TcpInitiator:coherence::component::util::TcpInitiator::TcpConnection::TcpReader"We are facing same issue. Could you please provide us any working .Net sample code for the version 12.1.2.0.
<ssl>
<protocol>Tls</protocol>
<local-certificates>
<certificate>
<url>c:\Cert\</url>
<password>password</password>
<flags>DefaultKeySet</flags>
</certificate>
</local-certificates>
</ssl>
thanks
Bala -
How to determine which IP address and port is used to make DNS queries?
I am using JNDI/DNS API to query a Enum server (Tel URI resolution in VOIP world) what is a DNS server.
But I have many network interfaces, in a VLAN environment, and I must to specify from which interface (and port)
all the requests are sent.
When I read the code of JNDI/DNS API (in JDK 1.5) and specially the DNSClient class, I can see that the
DatagramSocket is created without parameters... : udpSocket = new DatagramSocket();
How can I specify the IP address and port to use for my client???
Thanks for your help.I must to specify from which interface (and port) all the requests are sent. You don't have to specify the interface unless your static unicast routing tables are incorrect, and you never have to specify the port unless some lunatic is in control of your firewall.
-
The manual proxy settings keep defaulting to the wrong HTTP and port. This has caused me many hours of anguish. It works fine when I correct the settings but after you log off and then come back it has to be changed again. Is there anyway to fix it? Or can I go back to the previous version because 4 definitely has some issues (other than this one). I could live with it if I had to but I'm not the only one who uses this computer and they don't know how to make the changes. Thanks and I would definitely appreciate an answer.
See:
* http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Web Service Proxy with Dynamic IP and Port
hi,
I am currently looking at the Web Service Proxy generation in JDev 11g. I can generate proxies fine, but the proxies are generated with static host and port. I want to substitute the host and port during runtime if required, for instance read the values from a database. I need to do this to avoid compiling the application for every deployment we make dev, test and production. Is there an easy way to set the generated proxy host and port? Are there any examples?
Thanks in advance!
StephenHi,
Maybe you should have a look on XML Catalogs feature, but I am not sure if JDeveloper support it and how to support it.
-LJ -
Xbox 360/one problem and port forwarding
For a couple months now (since I got my AirPort Extreme) I have not been able to connect to a certain friend on xbox. I can connect to anybody else however. The only way we can (kind of) connect is if somebody else is host and we both connect to him.
My NAT type is Moderate. When I try to test my connection on my xbox it says that I can connect but I am limited in matchmaking (this is joining games and using voice chat, which is the problem named above for my particular friend). The xbox shows the error and suggests that I enable UPnP or open the port 3074.
The problem is that I have already have! I gave my xbox a static IP and forwarded the port 3074 to that IP.
(I have also tried forwarding all the ports that xbox live uses to the xbox. These being:
Port 88 (UDP)
Port 3074 (UDP and TCP)
Port 53 (UDP and TCP)
Port 80 (TCP)
as found on the xbox website... https://support.xbox.com/en-US/xbox-360/networking/network-ports-used-xbox-live
I made sure to put them in the right text boxes for UDP and TCP so that is not the problem either.)
I know that the AirPort Extreme does not support UPnP but does have a similar thing called NAT Port Mapping Protocol which was already enabled. (I tried all possibilities of enabling/disabling NAT...Protocol and port forwarding/not port forwarding.) --- This is not the solution as I see it
In short: My xbox tells me to open port 3074. I already have. It still tells me to open it and still won't work.
I posted this on the apple discussion page (instead of the xbox discussion page) because I know that it's not an xbox problem. When I had my old linksys router it worked perfectly.I have this exact same question and problem. I know this doesn't help, but would appreciate any updated information if you find an answer. I'll keep working on this also and let you know if I find an anwer.
-
How to remove old USB printer drivers and ports from Windows XP and Windows 7
We have several instances of HP 4250 Printers connected as local USB printers. When trying to replace this model with a HP P4015n or HP 600 M602n the new models will appear to install but won't print. No error messages but sometimes they try to install with ieee 1284.4 support which would seem to be a parallel port type. We're trying to use the HP UPD PCL 5. I'm looking for a way to completely remove the old printer instances, drivers and ports. While the printer icons and drivers seem to be able to be deleted the USB printer ports can't be deleted. Then when I go back and try to install the new model printer it can only use he existing USB port. Again, when that happens the new printer won't print. So I'm trying to get a completely fresh start with the XP SP 3 and Win 7 OS before installing the newer models. I've tried several methods to clean the USB printers but the instructions are never detailed and most times something is missing and the OS needs to be reloaded. I thought that I would see if someone who knows HP USB printers has any ideas...
These seem to be a commercial products. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
How to get server hostname and port from web form
Hi All,
I need to find out server hostname and port number
from 9i form.
That is if the form was called via:
http://myserver.com:1234/f90servlet?form=test,
i would like to call some
GET_XXX_PROPERTY(SERVER_HOSTNAME) that would return
myserver.com
and
GET_XXX_PROPERTY(SERVER_PORT) that would return
1234
or alternatively
GET_XXX_PROPERTY(SERVER_URL) that would return
complete URL, so that i can parse it myself.
Does anything like this exist? If not,would be
possible to get that information from any Java
function via java importer?
BR,
Robert
BR,
RobertRobert,
I'd add the code as a Java Bean in Forms and get this information from the Forms request URL.
Add the following bean to a Canvas and make it a size of 1x1 pixel so taht it appears hidden
import java.applet.Applet;
import java.net.URL;
import oracle.forms.handler.IHandler;
import oracle.forms.properties.ID;
import oracle.forms.ui.VBean;
public class FrmRequestInfo extends VBean
public static final ID pGetPort = ID.registerProperty("GET_PORT");
public static final ID pGetHost = ID.registerProperty("GET_HOST");
public static final ID pGetProtocol = ID.registerProperty("GET_PROTOCOL");
private String _host;
private String _port;
private String _protocol;
private URL FormsURL;
Applet m_applet;
/*Forms settings*/
IHandler m_handler;
public FrmRequestInfo()
public final void init (IHandler handler)
super.init(handler);
m_handler = handler;
// get the forms applet handler
m_applet = m_handler.getApplet();
// initialize cookie domain to the same domain that runs Forms
// Services
FormsURL = m_applet.getDocumentBase();
_host = FormsURL.getHost();
_port = new Integer(FormsURL.getPort()).toString();
_protocol = FormsURL.getProtocol();
public Object getProperty(ID p0)
if (p0 == pGetHost)
return _host;
else if (p0 == pGetPort)
return _port;
else if (p0 == pGetProtocol)
return _protocol;
else
return super.getProperty(p0);
To get the port number you call
VarcharVariable_Port := get_custom_property('beanblock.beanname',1,'GET_PORT');
for the hostname
VarcharVariable_Host:= get_custom_property('beanblock.beanname',1,'GET_HOST');
Frank
Ps.: just wrote the bean on the fly, without testing - but I am positive that it works as similar functionality works for me in other beans. -
Essbase1113 IP Address and Port Questions
hello,
everyone, i'm puzzled on a question about essbase.
it'll be so kind if you give me some suggestions.
in our project, we install EMP System 1113 on Win Server2003, but it's in local network. there is no problem when we connect it using client tools in local network environment.
however, we wanna connect the Essbase Server through Internet, we map the server address (such as 10.163.163.163) as an Internet address (such as 111.111.111.111).
we didn't use VPN such tools, and, the address is just a mapping, if we don't map the port, we couldn't connect the essbase server.
here comes the question, how do we map the essbase address and port ? i mean which port should we use, so that we could connect it through Internet ?
thank you so much.
wish to reply.
hawk.The ports that essbase use are outlined at :- http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install_start_here/ch06s05s01.html
Cheers
John
http://john-goodwin.blogspot.com/ -
Hi
WHere can I get the Host and Port no of the PI Server
Thanks
PRHi,
In addition to above, Just FYI that in PI 7.1 the Http and J2ee port are same..
The discussion about same can be found [here|Re: Architecture of PI 7.1] and [here|Re: ABAP & Java ports in PI 7.1?]
and to check all the info @ single place:
Login to XI ABAP stack -> Run tcode SXMB_IFR -> Choose Option Administration -> Properties Administration ->All properties
Sachin
Edited by: Sachin Dhingra on Apr 2, 2009 10:01 AM -
hello colleagues,
In the phase Connect Diagnostics dont show the Agent available in SLD, but when go to SLD i have the agents,
Error,
Connect Diagnostics Agent
The table does not contain any data
Agent availables in all SLD
SOAP:1.007 SRT: Unupported xstream found: ("HTTP Code 401 : Unauthorized")
Web service invocation problem on host hostname and port 8000 protocol : http logical port name : LP_WS_SMDAGENT_MONITORING
ThanksOK, then pls follow below steps;
- Go to step 'Create Users' in solman_setup System Preparation scenario and make sure the user SM_INTERN_WS has a green status. Use the 'Test Login' button to make sure the user is not locked and has correct credentials maintained in solman_setup
- Immediately after checking the user status, navigate to Configure Connectivity->Enable Web Services and execute again the 'Create Logical Ports' automatic activity, in order to propagate the correct credentials to the Logical Port definitions.
- If the above operation is not successful, repeat the two steps above, providing a different user Id in 'Create Users' step, eg SM_INTERN_W1. This will prevent situations where the user gets locked by Logical Ports using an obsolete password.
Let me know the results.
Regards,
Vivek -
Mapping Yamaha DTXplorer in logic pro - Environment window clicks and Ports
The midi signals for Yamaha DTXplorer are off from GM. The snare (G0) and bass drum (A0) output notes do not trigger snare (D1) and bass drum (C1).
I am a novice to both MAC and Logic Pro.
I have the midi out of the drumset going USB right into my MAC.
I've gotten as far as...
1. Environment window>clicks and Ports
2. Verifying the channels that DTX triggers for snare and bass drum.
3. Changing the output notes to D1 & C1.
Nothing changes with the sound.
In fact, I can change the output notes for drums that are set up correctly and they don't change either.
None of the alterations I do in the Environment window seem to do anything to the midi signals!
Do I need to activate or save the changes? If so, how (precisely)?
Thanks in advance.You can do that from within the app, under menu Logic Pro X;
Regards
Maybe you are looking for
-
What is the BEST way to upgrade from Leopard to Tiger?
My current set-up is noted below. The main "Macintosh HD" is 250 GB's in size and is fairly filled up with programs and plug-ins. (I own Logic Studio 8 and Final Cut Pro Studio 2, as well as Adobe's CS4 Web Premium Suite.) Prior to doing the upgrade
-
CS3 Won't change extension in Save As
Hello, I've run into a rather frustrating problem that I've been trying to fix all day with no luck. I recently formatted my computer and reinstalled Photoshop CS3. However when attempting to save a JPG from a PSD, it dosen't allow me to. What happen
-
Hi all, There is an user exit J_1I7_USEREXIT_CALC_EXC_BASE which has the KONV structure, you may put your logic to derive the excise base and pass it to field EXCITM_BASE which will update the assesable value. For example, you will have the JEXP cond
-
I use the NI Vision Assistant a lot. Usually I ask it to create a vi automatically from the script. However, the resulting vi contains several 'IVA' vi's that are completely undocumented (from what I can see). Where can I get more info on these?
-
Closing safari when opening links from facebook
iPhone 5 (ios 8.0.2) Using wifi for surfing on Internet. Country: Hungary I am using facebook by Safari browser (facebook applicaion is not installed on my phone). Since I updated ios from 7.1.2 to 8.0.2 if I am trying to open links, web pages or vid