OAS and proxy configs in IE5

I have OAS on an NT4 box connecting into my Solaris cluster w/ 8i. I can hit my webpage local on the NT box but when I go to other boxes I can't see the page unless I take the proxy config out of the IE5 browser. Then I can't see the internet with those machines. Have tried to leave the proxy w/ the bypass button checked and putting the address in my host files no go. Is there a setting that I can change in OAS that will effect this..I know I can config my IE5 browser but I have alot to rollout to so that may be hard to do...It is only on an intranet but it resolves to the fully qualified net name ie:http://iam.here.com/ but will not resolve to http://iam/...Is this possibly a DNS issue or a OAS config issue... we are using a 8080 port setting on all outgoing www and ftp traffic but this should not effect internal traffic.
Thanks,
Eric

if I have IIS for BI Pres Svcs and the BI Server is installed on OASNo -- you have the Presentation Services plugin installed on IIS OR OAS -- and that's all from an OBIEE point of view.
BI Server is a standalone binary (nqsserver) which runs outside of any application server.
I can point BIP to the OAS on BI Server?You would install BIP on OAS. However - I don't know how the security integration would work, or if it would. Sorry.
Maybe someone else here will be able to help, or you could try the BI Publisher forum?

Similar Messages

I was infected by a virus and this changed proxy config to 127.0.0.1:64727, i removed the virus, but every time i start firefox i find the proxy configuration made by the virus.is there any config file i can change ?

I was infected by a virus (i can't remember the virus name). Antivirus removed it, but i think it changed some config file on FF, 'cause every time i try to restart it , i find it configured to use proxy 127.0.0.1:64727. I change every time the config, i also tried to change the config on the about:config and set network.proxy.type 5 , no port and no network proxy (so it's all on default) . I changed the config on the gui, i removed the config from windows registry ( IE and chrome start normally, with no proxy), but every time i restart FF i find the proxy config there. How can i fix it ?

I had the same problem.
Solution
'''Clear Virus First'''
-clear virus using either anti-virus or manually going into task manager and figuring out which processes are bad.
-If the manual way, go through each process in task manager and right click to "open file location". Depending on where it is located and the name of the process, you can google the process name online to see if it is bad.
-Delete the bad process file and as added security, create a folder using the name of the process so the file can't be recreated later. (example: If I had a virus "3dcr.exe" in folder c:\user, then delete "3dcr.exe" and create a new folder c:\user\3dcr.exe\ )
'''Fix Proxy Settings'''
-If your browser points an proxy server and you can't change the settings because every restart of firefox returns the settings back (even after changing in about:config or prefs.js or options>advanced>network>settings). The answer is to uninstall firefox with all its user preferences and the reinstall it.
*I know it is a bit brute force, but it was the only method I found to work. Just be sure to save your bookmarks first.

[svn] 2636: Add the tests for proxy config (blz-200 and blz-201)

Revision: 2636
Author: [email protected]
Date: 2008-07-28 08:07:07 -0700 (Mon, 28 Jul 2008)
Log Message:
Add the tests for proxy config (blz-200 and blz-201)
Ticket Links:
http://bugs.adobe.com/jira/browse/blz-200
http://bugs.adobe.com/jira/browse/blz-201
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/WEB-INF/flex/proxy-config.mods.xml

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

NEEDED : ISE 1.1.3 Posture configuration and Switch Config (ACL, dACL)

hello,
could anyone please post screen capture of ISE posture configuration ( and remediation )
I need urgently a dACL and a redirection ACL that work at least in a mockup lab.
Authentification and authorizations policies not needed.
posture and remediation policies not needed.
The issue is about ACLs (I guess)
Also needed is a valid switch config file, with ACL (if necessary) a the DOT1x ethernet port.
My IOS is 122.55 SE or 52 SE
Thank you by advance.
Best regards.
V.

Hi Venkatesh,
Your the ultimate ISE Guru !!
You're right
Thanks a lot.
See screen captures and Sw config below
aaa new-model
aaa group server radius ISE
server 192.168.6.10 auth-port 1812 acct-port 1813
server 192.168.6.10 auth-port 1645 acct-port 1646
aaa authentication login default local
aaa authentication dot1x default group ISE
aaa authorization network default group ISE
aaa authorization network auth-list group ISE
aaa authorization auth-proxy default group radius
aaa accounting dot1x default start-stop group ISE
aaa server radius dynamic-author
client 192.168.6.10 server-key 123456789
ip dhcp snooping
ip device tracking
dot1x system-auth-control
dot1x critical eapol
interface FastEthernet1/0/1
switchport mode access
ip access-group ACL-ALLOW in
authentication port-control auto
authentication periodic
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
spanning-tree bpduguard enable
ip http server
ip http secure-server
ip access-list extended ACL-ALLOW
permit ip any any
ip access-list extended ACL-POSTURE-REDIRECT
deny   udp any any eq domain
deny   udp any host 192.168.6.10 eq 8905
deny   udp any host 192.168.6.10 eq 8906
deny   tcp any host 192.168.6.10 eq 8443
deny   tcp any host 192.168.6.10 eq 8905
deny   tcp any host 192.168.6.10 eq www
permit ip any any
snmp-server community snmp RO
snmp-server community RO RO
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps mac-notification change move threshold
snmp-server host 192.168.6.10 public
snmp-server host 192.168.6.10 version 2c snmp mac-notification
radius-server attribute 6 on-for-login-auth
radius-server attribute 6 support-multiple
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 5 tries 3
radius-server host 192.168.6.10 auth-port 1645 acct-port 1646 key 123456789
radius-server vsa send accounting
radius-server vsa send authentication
V.

Proxy-config wsdl question

When defining my destenatoin in the proxy-config.xml, Is it possible to point to a wdsl located on the local file system?
I am trying to connect TIBCO web-services which do not advertise the WSDL.
-jh

You peaked my interest so I did the following.
FIrst, I found a simple service (calculate) online and copied it's WSDL to my local drive.
http://www.dneonline.com/calculator.asmx?WSDL
I added the file reference to it in my proxy-config.xml.
<wsdl>file://c:/calculator.wsdl</wsdl>
No luck!
However, since I had the WSDL, I placed it on my local TOMCAT (LCDS) instance so that I could reference it via HTTP.
<destination id="testWSDLFile">
<properties>
<wsdl>http://localhost:8400/lcds/wsdl/calculator.wsdl</wsdl>
<soap>*</soap>
</properties>
<adapter ref="soap-proxy"/>
</destination> Once i did that, I could use the Data Service wizard in FlashBuilder and everything seemed to work. I was worried that I might have crossdomain issue-something to consider I suppose. Otherwise .. all good.
Hope that helps some
-bob-

Outlook and proxy PAC file

Using Outlook 2010 SP2 connecting to Exchange 2013 SP 1 with a PAC file (configured under Internet Options). When the PAC file is not available, Outlook fails to connect to Exchange initially, upon hitting the retry button (on server unavailable
message), it connects just fine. Not sure if this has to do with Outlook Anywhere or Outlook application in general, but it looks as if it does not fail open cleanly (like IE for example). Is there a way to tell Outlook to connect to Exchange by
ignoring/bypassing the system wide proxy config from Internet Options? I want to ensure that if the PAC file is not available to Outlook, it connects to Exchange without issues.

Thank you for the update.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

[svn] 2611: Bugs: BLZ-200: Setting virtual-host in proxy-config causes ConfigurationException

Revision: 2611 Author: [email protected] Date: 2008-07-24 11:36:03 -0700 (Thu, 24 Jul 2008) Log Message: ----------- Bugs: BLZ-200: Setting virtual-host in proxy-config causes ConfigurationException BLZ-201: Configure host/port for proxy setting causes ConfigurationException in BlazeDS QA: need a unit test reading the example proxy-config.xml and verifying that all values are read in HTTPProxyAdapter.java Doc: no Came across and fixed another bug: when <max-connections> is not set inside a <max-per-host>, we assumed the default value of 2 instead of the <default-max-connections-per-host> value (if set). Also, some whitespace reformatting in HTTPProxyAdapter.java. Ticket Links: ------------ http://bugs.adobe.com/jira/browse/BLZ-200 http://bugs.adobe.com/jira/browse/BLZ-201 Modified Paths: -------------- blazeds/branches/3.0.x/modules/proxy/src/java/flex/messaging/services/http/HTTPProxyAdapt er.java blazeds/branches/3.0.x/resources/config/proxy-config.xml

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

Subversion JDev plugin and proxy

Hi,
Is it possible to configure the JDev subversion plugin to work via a proxy?
The subversion server is listening using HTTP on the Internet but there are no proxy options under subversion in JDev. Is there a file somewhere that I can add a proxy config manually?
Tortoise SVN client does have a proxy setup.
Using JDev 10.1.3.3 and SVNKit 1.1.1
Brenden

Brenden,
The way I was able to use a proxy - install the SVN client, then set up the JDev plugin to use the native client. Then, you can configure the proxy via the normal mechanism for SVN.
Hope this helps,
John

Using auto detect proxy when I close web pages it goes back to manual proxy config help please

I was using the web o/k restarted my computer, tried to conect to the internet web page came up but would not turn over, said trouble with proxy. Looked in tool, options, advanced, setting. The box next to Manual proxy config was ticked. Changed to auto detect proxy clicked ok then ok. Next it had reverted back to manual proxy, is there a way to save this on auto proxy config as it is a pain having to change it all the time.
Thanks

See:
* http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

CSS110501 - CE590 (ACNS 5.1), reverse proxy config issue

Guys,
I'm trying to get the following to work:
Client on internet (no explicit proxy config) is connecting to a webserver. The VIP resides on the CSS which has a reverse proxy config pointing to the CE590.
|Client|
|
|
| CSS |----------| CE590 |
|
|
| Web |
I used the config from the Cisco web, but I can't get it to work.
I can connect to the webserver, but it looks like the CE590 is not acting as a proxy, at least not completely.
Because it looks like it 'hangs' on collecting the graphics.
This is my config on the CSS:
service bktpce1
protocol tcp
port 80
no cache-bypass
ip address 192.168.0.2
type transparent-cache
active
eql cacheable
description "This EQL contains extensions of cacheable content"
extension pdf "Acrobat"
extension fdf "Acrobat Forms Document"
extension au "Sound audio/basic"
extension bmp "Bitmap Image"
extension z "Compressed data application/x-compress"
extension gif "GIF Image image/gif"
extension html "Hypertext Markup Language text/html"
extension htm
extension js "Java script application/x-javascript"
extension mocha
extension jpeg "JPEG image image/jpeg"
extension jpg
extension jpe
extension jfif
extension pjpeg
extension pjp
extension mp2 "MPEG Audio audio/x-mpeg"
extension mpa
extension abs
extension mpeg "MPEG Video video/mpeg"
extension mpg
extension mpe
extension mpv
extension vbs
extension m1v
extension pcx "PCX Image"
extension txt "Plain text text/plain"
extension text
extension mov "QuickTime video/quicktime"
extension tiff "TIFF Image image/tiff"
extension tar "Unix Tape Archive application/x-tar"
extension avi "Video for Windows video/x-msvideo"
extension wav "Wave File audio/x-wav"
extension gz "application/x-gzip"
extension zip "ZIP file application/x-zip-compressed"
content p_cm_vip-prod-appl-www
protocol tcp
port 80
vip address 123.13.112.56
add service x-appl-server1
active
content p_nc_vip-prod-appl-www
sticky-inact-timeout 15
add service x-appl-server1
port 80
url "/*"
protocol tcp
vip address 123.13.112.55
active
content p_rp-vip-http-web
protocol tcp
port 80
url "/*" eql cacheable
add service bktpce1
vip address 123.13.112.55
active
This is the config on the CE590:
! ACNS version 5.1.15
http proxy outgoing host 123.13.112.56 80 primary
http l4-switch enable
interface FastEthernet 0/0
ip address 192.168.0.2 255.255.255.248
no autosense
bandwidth 100
full-duplex
no cdp enable
exit
ip default-gateway 192.168.0.1
no bypass load enable
rule action use-proxy 123.13.112.56 80 pattern-list 1 protocol all
Do I need to configure something else?
Regards,
Edwin

I can see traffic hitting the VIPs:
p_cm_vip-prod-ap Active x-appl-server1 5827
p_nc_vip-prod-ap Active x-appl-server1 1574
p_rp-vip-http-we Active bktpce1 1149
When I look in the apache error logs there are no entries.
When I look in the appache access logs I only see the following entries from my client host:
82.4.195.39 - - [02/Aug/2005:10:24:37 +0200] "GET / HTTP/1.1" 200 5296 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.1.4322)"
82.4.195.39 - - [02/Aug/2005:10:24:37 +0200] "GET /outerframe.php?language=NL&strSiteCountry=NL&BRCHERKOMST=BRC HTTP/1.1" 200 3624 "http://preprod.daarginds.nl/" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.1.4322)"
82.4.195.39 - - [02/Aug/2005:10:24:37 +0200] "GET /main.php?language=NL&strSiteCountry=NL&BRCHERKOMST=BRC HTTP/1.1" 200 36569 "http://preprod.daarginds.nl/" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.1.4322)"
82.4.195.39 - - [02/Aug/2005:10:24:37 +0200] "GET /js/dropdown_initialize.js.php?language=NL&strSiteCountry=NL&BRCHERKOMST=BRC HTTP/1.1" 200 228 "http://preprod.daarginds.nl/main.php?language=NL&strSiteCountry=NL&BRCHERKOMST=BRC" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.1.4322)"
82.4.195.39 - - [02/Aug/2005:10:24:37 +0200] "GET /js/dropdownC.js.php?language=NL&strSiteCountry=NL&BRCHERKOMST=BRC HTTP/1.1" 200 15928 "http://preprod.daarginds.nl/main.php?language=NL&strSiteCountry=NL&BRCHERKOMST=BRC" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.1.4322)"
82.4.195.39 - - [02/Aug/2005:10:24:37 +0200] "GET /css/daarginds.css HTTP/1.1" 304 - "http://preprod.daarginds.nl/main.php?language=NL&strSiteCountry=NL&BRCHERKOMST=BRC" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.1.4322)"
When I do a tcpdump on destination port 80 on the server, I see the following:
preprod.daarginds.nl.http: . ack 52149 win 64860 (DF)
10:34:05.957776 82.4.195.39.6242 > preprod.daarginds.nl.http: . ack 10204 win 64860 (DF)
10:34:06.058767 82.4.195.39.6242 > preprod.daarginds.nl.http: P 1403:1905(502) ack 10204 win 64860 (DF)
10:34:06.058777 82.4.195.39.6243 > preprod.daarginds.nl.http: R 1064:1064(0) ack 53295 win 0 (DF)
10:34:06.070434 82.4.195.39.6242 > preprod.daarginds.nl.http: R 1905:1905(0) ack 10372 win 0 (DF)
10:34:27.020617 192.168.0.2.55444 > preprod.daarginds.nl.http: S 1662943048:1662943048(0) win 5840 (DF)
10:34:27.020866 192.168.0.2.55444 > preprod.daarginds.nl.http: . ack 155787170 win 5840 (DF)
10:34:27.020889 192.168.0.2.55444 > preprod.daarginds.nl.http: F 0:0(0) ack 1 win 5840 (DF)
10:34:27.021240 192.168.0.2.55444 > preprod.daarginds.nl.http: . ack 2 win 5840 (DF)
So the CE is hitting the webserver (although not shown in the apache log files).
But the 192.168.0.2 you see with the tcpdump is listed every 60 sec, and this is the is-a-live test of the CE.....
You don't see an entry in tcpdump or in the apache log files when hitting the server with a browser.
Edwin

OD managed client proxy-config

Hello all,
we created at the OD-server (OSX 10.5.8) a computergroup for our
managed clients (OSX 10.6.2).
Some configs working correct, f.e dock-config (ID com.apple.dock).
But the proxy-config (ID com.apple.SystemConfiguration)
wasn't executed at the client.
The client keep former proxy-entries.
Is this an error or because of forward reverse proxy?
Thanks! Wolfgang

Hi
I have seen this before a number of times and only on Intel iMacs, old and new. All I can put it down to is a possible screen corruption at the Login Window? Perhaps a rogue or damaged/corrupted font? It may also have something to do with how the setting is being applied locally which might be conflicting with the Managed Preferences applied from the Server?
I have also seen it initially with an OD Master/Replica pair.
For me it tends to disappear after a while or if you click the back button or restart. It might be a timing issue with whatever is providing the routing? Perhaps the NTP Server? If you're in a position you could investigate the Switch or Router? Perhaps replace one or the other or both (temporarily) to see if things change?
Tony

Add proxy config with ard2

How can I add a proxy config to 30 mac with 10.4 with ARD2 ?

You shouldn't have to enable the root account. I've
send myriad UNIX commands to my workstations
(including testing the one in this thread) without
problems and none of them have the root account
enabled.
Not sure why you're hitting that error. Are the
systems reporting that error on the same version of
Mac OS X as the systems for which it works correctly?
Dave, thanks for the advice, the computers are all netbooted from the same image on my osx server... I'm now trying to solve another problem with unix commands.
I'm trying to get a lab to log into a networked testing program, and select the correct test version simultaneously. So far using osascripts, I've got the whole lab to log into the macs, log into the testing program, but now I need it to select the correct test and level. Here's my script:
osascript -e 'tell application "System Events" to keystroke "1" using command down'
osascript -e 'tell application "System Events" to delay 3.0'
....NEED COMMAND HERE TO MOVE TO SECOND CHOICE IN A HIGHLIGHTED LIST (the down arrow does this on the keyboard...)
osascript -e 'tell application "System Events" to delay 3.0'
osascript -e 'tell application "System Events" to keystroke return'
osascript -e 'tell application "System Events" to delay 3.0'
osascript -e 'tell application "System Events" to keystroke "n" using command down'
I thought I had it working using this command:
osascript -e 'tell application "System Events" to keystroke "down"'
but it doesn't seem to work now...
Tried this one too:
osascript -e 'tell application "System Events" to keystroke down'
So, does anyone know what to say that similar to hitting the down arrow on the keyboard?
Thanks!

What is difference between ADF Task Flow and Faces-Config - when delpoy ?

What is difference between ADF Task Flow and Faces-Config? When I create navigation between pages with ADF task flow then the navigation don't work when I deploy my application to Weblogic 10.3. When I use default server then navigation works fine. With Faces_config in both situations all works ok - on Stanalone server and default.
Where is the problem?
Best regards!

Shay, I don't use both faces-config and adf task flow! When I failed with task flow I tried faces-config.
I have active on my weblogic - adf.oracle.domain(1.0,11.1.1.0.0). This is the right ADF? If yes then where is the problem?
Best regards!

Is there a way to force which wifi network and proxy clients connect to from WGM?

is there a way to force which wifi network and proxy clients connect to from WGM?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Why is a sender communication channel not required for IDOC and PROXY ?

Hello,
In case of IDOCs, metadata will be available in PI for the IDOCs used both at inbound and outbound.
Why is a sender communication channel is not required in case of IDOC and PROXY outbound scenarios (i.e. IDOC to File or PROXY to file ..) when a receiver channel is required for scenarios like file to IDOC or file to PROXY.
Though this might be a regular question, I am not able to find a proper reason.
Please let me know the reason for the above request.
Thanks & Regards.

You will create RFC destination in ECC , it will have details about PI system details, when ever you send IDoc, ECC will use Port and RFC destination to connect PI Integratiion engine to deliver data to PI.
But when receiver side you will create RFC destination in PI with ECC details, but to call RFC destination and Port we need medium that was the reason we create IDoc communication channel.
Even the same case for Proxy also, but HTTP deastination establish the conection between ECC and PI, but receiver side you have to create XI channel with PI integratioin engine adress to post data.
Regards,
Raj

OAS and proxy configs in IE5

Similar Messages

Maybe you are looking for