Oas hangs after startup

hey all,
if this isn't the right forum please point me to the correct one. I couldn't find any non-9i forums.
I am having the problem described in Doc ID: Note:130901.1 . the docs says to apply these patches:
Patch#1411970
Patch#1332640
Patch#1348552
Patch#1375574
problem is, I can't find the patches on metalink either in the old patch database or hte new one.
can somebody please point me to the patches?
thanx
ej
null

Trying booting into safe mode and try to do a restore to LKGC (Last Known Good Configuration).
Sumanth Nag M

Similar Messages

10.4.1 hangs after startup - 64-bit Win7

I tried reinstalling iTunes as my CDs were not showing up in iTunes. The system is Windows 7 Professional 64-bit. Now iTunes hangs at startup . . . all I see is the beginning of a translucent window. I've uninstalled, reboot, reinstalled many times.

Bump. Also an update: I found out that iTunes doesn't hang all the time when I tell it to close, only when I have the visualizer going, not in full screen mode. Hope that might help anything.
Thanks,
Carter

Managed server hangs after startup

For some reason we're unable to start one of our managed servers in one of our clusters.
After starting up, it takes about ten secons before it hangs.
The last message in the output logs is:
IIOP subsystem enabled
What could be going on? And how can we solve this?
We've already tried stuff like restarting nodemanager and adminserver, and we even rebooted the box.

Landro,
I had the same issue. I followed what was done here:
http://forums.bea.com/bea/message.jspa?messageID=300001317&tstart=0
and it worked. For me I believe it was an issue connecting to an Active Directory system.
-John

ITunes hangs after startup

I open itunes, which takes its time opening, then once it is fully open it will hang at between 50-100% CPU usage for at least 15 minutes before I can do anything. I would like to know if there is anything I can to to alleviate this.
This is a fresh install of Windows 7 64-bit, the computer has 3gigs of ram, a Dual Core Xeon 3.0ghz processor, and the library is about 260gb and is being shared from a samba share from linux over gigabit. However there are no problems with using the Zune player over the network so it is not a network latency problem.

I did two things which resolved this problem.
1. went to device manager and noted an error on the Apple USB driver.
Fixed by reinstalling it from c:/program files/common files/apple
It took a couple of tries but eventually it resolved.
2. Go into Control Panel / Programs and then right-click on Bonjour and select repair.
After that it worked.

Hangs after startup

My laptop boots comes to first scrren and then when I click somewhere or do anything it freezes

Trying booting into safe mode and try to do a restore to LKGC (Last Known Good Configuration).
Sumanth Nag M

WebLogic 10.3.2.0 hanging at startup after "The server log file is opened."

Hi,
A WebLogic 10.3.2.0 server is hanging at startup. There are no error messages. The last command in the startup window is:
"The server log file <log file dest> is opened. All server side log events will be written to this file."
I think the next line should be:
"Security initializing using security realm realm."
Any ideas on what could be the issue? For instance what resources should be accessed at that point of time? There is sufficient space left on the (virtual machine) disk. The VM configured with 8GB memory. Could it be performance related still?
Following is written to the log file:
####<12.aug.2010 kl 09.47 CEST> <Info> <WebLogicServer> <oim> <> <Main Thread> <> <> <> <1281599254656> <BEA-000214> <WebLogic Server "AdminServer" version:
WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.> ####<12.aug.2010 kl 09.47 CEST> <Notice> <Log Management> <oim> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1281599255312> <BEA-170019> <The server log file ....logs\AdminServer.log is opened. All server side log events will be written to this file.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Log Management> <oim> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1281599255390> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Diagnostics> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599255671> <BEA-320001> <The ServerDebug service initialized successfully.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Store> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599256515> <BEA-280050> <Persistent store "WLS_DIAGNOSTICS" opened: directory="....s\domains\oim\servers\AdminServer\data\store\diagnostics" writePolicy="Disabled" blockSize=512 directIO=false driver="wlfileio2"> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "t3" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "t3s" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "http" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "https" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "iiop" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "iiops" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "ldap" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "ldaps" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257187> <BEA-002622> <The protocol "cluster" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257187> <BEA-002622> <The protocol "clusters" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002622> <The protocol "snmp" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002622> <The protocol "admin" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002624> <The administration protocol is "t3s" and is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <RJVM> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257468> <BEA-000570> <Network Configuration for Channel "AdminServer"
Listen Address          :7001
Public Address          N/A
Http Enabled          true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257687> <BEA-002609> <Channel Service initialized.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258000> <BEA-000406> <NTSocketMuxer was built on Jan 13 2005 17:47:03
####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258078> <BEA-000436> <Allocating 3 reader threads.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258078> <BEA-000446> <Native IO Enabled.> ####<12.aug.2010 kl 09.47 CEST> <Info> <IIOP> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599259500> <BEA-002014> <IIOP subsystem enabled.>
Thanks!!

tried both of these, still having same error as below:
<Sep 8, 2010 1:32:37 PM IST> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
<Sep 8, 2010 1:32:37 PM IST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User weblogic2 javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User weblogic2 denied
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:250)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
>
<Sep 8, 2010 1:32:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Sep 8, 2010 1:32:37 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Sep 8, 2010 1:32:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Pls help me out ASAP...

[SOLVED*] system hangs at startup after grub screen

My system is hanged after the grub window. I choose Archlinux, like always, apparently starts to boot and the next screen is frozen. It says:
/dev/sda2: recovering journal
/dev/sda2: clean ....
systemd-fsck[208]: /dev/sda1: recovering transactions file
systemd-fsck[208]: /dev/sda1: clean ...
systemd-fsck[221]: /dev/sda4: recovering transactions file
systemd-fsck[221]: /dev/sda4: clean ...
And that's it. It frozes in this point. I didn't make any update since 3 days ago. Yesterday the computer runs well.
I tried to enter into Fallback mode, but I get to the same point.
Any suggestions?
Solved partially: I connected a second screen this morning. When I disconnect it, the system starts. Now I have to solve how to add a second screen because when I add it once the system is running, it hangs.
Last edited by doblerone (2014-03-01 08:32:18)

Have you looked at any logs whatsoever?
Edit ::
doblerone wrote:Solved partially: I connected a second screen this morning. When I disconnect it, the system starts. Now I have to solve how to add a second screen because when I add it once the system is running, it hangs.
Thats more like you found a work around and is far from being solved
Last edited by Kartious (2014-03-01 13:46:46)

[SOLVED] System randomly hangs shortly after startup

First of all: hi everyone, as of last weekend I am a brand new Arch user
My problem: I installed Arch on Friday and had no problems with it all weekend, but on Tuesday the whole system suddenly started freezing within a few minutes of being switched on. My cursor stopped blinking, mpd output stopped, and nothing would respond. It didn't matter what I was doing at the time (mostly I wasn't doing anything, or was typing a command). It didn't matter if X was running, or what daemons were running (I disabled all of them eventually). Sometimes I hadn't even logged in yet (although the fault never occurred before agetty popped up). The timing was unpredictable but it always happened within a few minutes of system startup. I could see nothing in the output of dmesg, or in any system logs, that would indicate any problems. The fact that nothing had changed over the weekend, coupled with the unpredictable timing of the fault occurrence, led me to assume it was a hardware fault. However, I had three other operating systems on the same hardware and hard drive (Gentoo, Debian and Windows XP) which all were unaffected. I did an fsck on the Arch partition but there were no problems found, and the smartmontools didn't show any cause for concern either.
Eager to get past the problem, I reinstalled Arch on the same partition, erasing everything I did over the weekend. Freshly installed, with nothing installed besides the base and base-devel packages, Arch still hung just after startup even before I'd finished creating my user account. (Interestingly, the installer never suffered from the same fault.) Still thinking it could be a bad sector or something, I installed Arch on first the Debian, then the Windows partition (who needs either of those, right? ) but neither gave me a problem-free system.
Essentially my problem is this: Arch will no longer work when it is installed or run on the exact hardware that I installed and ran it on over the weekend, even though other distros can run quite happily on the same hardware! Does anybody have any ideas? I've been bitten by the bug now and don't feel right going back to Gentoo!
Last edited by mutantpineapple (2009-12-18 12:47:01)

update:
by installing using the old packages on the cd rather than downloading the new ones, i was able to get a working system again. however when i did a pacman -Syu the problem returned. through trial and error i found that the problem package is kernel26 (or the modules). for whatever reason, i'm having to stay with 2.6.30 for now. is this a bug with the kernel26 package?

10.7.4 Hanging at Startup

I don't often find the need for these forums, but I've got a tough one this time. Here's my issue:
I was recently using my late 2008 MBP (6 Gig RAM, 500 Gig HD) without issue as I have done for the last several years. The other night, I was running my DJ software (Traktor) which worked fine all night. I ended the night and shut the lid on my MBP, the next day, Traktor was still shutting down (as it does on occasion). I gave it a few minutes, but it seemed to have crashed so I force quit the program. Things seemed to be running slow so I restarted. When I did, my system hung on startup at the gray Apple screen with the spinning wheel. After many days and many, many troubleshooting routines, I'm STILL unable to make this go away permanently. Here's what I've tried:
(I've always been able to boot in Safe Boot mode, so that's how I've been doing maintenence)
Initially, I thought this was probably related to my DJ software so I uninstalled it (including manually uninstalling all extensions and preferences).
That didn't work so I started cleaning out my system (I haven't done a fresh install of OSX since like 2005, so it was probably time anyways). Still, no luck.
I reinstalled 10.7.4. Success, but only for the initial startup. A subsequent reboot and I'm back at the stalled startup.
Try removing more stuff from the system to no avail.
Wipe hard drive completely, reinstall OS X. WORKS!
So, I start migrating things back over from my backup (I used CCC instead of TM because I wasn't sure of the integrity of my TM backup). Things seem to be going OK.
Reinstall Messages beta and restart. NOOOOOO. Back hanging at same place.
I figure it has something to do with Messages, so I Uninstall the Messages beta. Still hanging at startup.
Getting really frustrated now.
Time to try a blast from the past: Applejack. Yes, I know, it's not officially supported under 10.7, but low and behold, cleaning caches gets me back in business--but only for one reboot. Then I'm back at a stalled startup until I clean the caches again (and it's the system cache, not the user cache).
I tried resetting the SMC and the PRAM and then immediately cleaning the system caches. That again gives me one good restart then back to the hanging startup. And, that's where I'm at now.
I'm absolutely stuck. I literally have not experienced this kind of issue in at least five years, so I could really use a hand on this one. The last log entry that I'm getting on the stalled startup is this:
6/28/12 11:25:39.364 PM ntpd: proto: precision = 1.000 usec
Then it just hangs forever. The spinning progress wheel just freezes. I left it sitting overnight at that screen, so I'm 100% sure that it's not going anywhere.
I have a couple of theories on what the issues could be, but at this point, I'm totally open to suggestions. From what I can tell (from watching the logs over the course of several (seems like) hundred startups), it seems like this is about the point in the startup where iCloud is trying to check my user credentials. That said, I could be totally off base with that. Also, although the preceeding log entry seems to come after this on occasion, I'm NOT seeing this entry on any of the startups that hang:
6/28/12 11:25:38.000 PM kernel: NVDANV50HAL loaded and registered.
Seems to me that this could be an issue too since that's obviously associated with the graphics hardware.
So, any help would be greatly appreciated!

Something you haven't mentioned is whether you have tried booting
from your clone and having the same issues. Did you try that?
If it boots and works fine from the clone, then there could be
a corrupted file trying to be accessed at boot (possible bad sector)
on the internal drive or it could be that the drive is starting to
give out.

InDesign CS5.5 hangs on startup (Snow Leopard 10.6.8)

Newly installed CS5.5 from disc + online update. InDesign hangs shortly after startup.
Found some suggestions in this thread on CS5:
http://forums.adobe.com/message/3116186
Fixed by deleting the SING datastore folder, as per Adobe support document, which doesn't yet say it applies to CS5.5.
http://kb2.adobe.com/cps/408/kb408816.html
Hope this helps someone.

InDesign CS5.5 currently crashes on launch when launching from the dock or the app direct, throwing up a crash report (http://pastebin.com/8dNiiSWu).
This crash is from opening a Flash file (SWF) inside the PMWelcomeScreen plugin. You can try moving Plug-Ins/PMPack/PMWelcomeScreen.InDesignPlugin out of the plugins folder, as a workaround only. You won't get the Welcome Screen, but that's perhaps a small price to pay. Not sure which flash file it is opening and failing on. Are you behind a firewall?
If launching from a document, InDesign launches, throws up a crash report, but you can still work on the document. Can still print/pdf but on closing another crash report is thrown up.
Sorry, this doesn't really make sense. If InDesign crashes, you cannot continue to work in it. Perhaps you are getting confused by previous crash reporter dialog windows that you have not dismissed or submitted so were still hanging around. Also, sometimes they take quite a while to pop up -- not always contemporaneous with the crash.

Acrobat Reader 9.1.x freezes after startup

Hello,
Our Acrobat Reader is having problems on some machines during startup that it completly freezes after startup.
I've traced this with procmon and have seens that a certain file "sharedEvents" is trying to to somthing buth it is hanging on
lock - unlock. Killing All process of Acrobat Reader and deleting this file and then re-starting the program isn't helping because it keeps 0 kb and the mentioned behaviour is trying to do something with this file.
the file can be found in %appdata%\adobe\acrobat\9.0
Our profile's is redirected , it is working for most of the users but some users are having this problem.
Can anybody tell me what Acrobat Reader is doing with this file and is there a work around to initialize everything back again so the
user can startup the program normally so it is not freezing after startup without having to remove and install it back again ?
Best regards,
Bert

Hi,
The problem I'm having is a problem on the journal file. After some more investigating it look that the problem can be related to oplocks since we have enbaled oplocks on our server (were the file is placed trough folder redirection). We will check this ...
I've already disabled oplocks on client side and then everything is working however we are using Vista in combination with offline files and if you disbale oplocks then offline files will not work so we are looking a bith further to see what we can do on server side ... to be continued ...
Best regards,
Bert

IMovie Hangs After Full Quality Sharing Is Complete

Hi,
Why does this happen? I did a Full Quality Share on a 2-1/2 hour multi-clip movie (using Share Selected Clips Only). The export progress dialog hung after the export was clearly finished. I eventually had to Force Quit iMovie.
The exported movie looks fine in QT Pro. However, Movie Properties in QT shows that this movie is 24 frames longer than what I exported from iMovie. Doesn't seem to be a big deal, but annoying nonetheless.
I'm more concerned about iMovie hanging after a long movie export as described.

2-1/2 hour multi-clip movie (using Share Selected Clips Only)
so, your project is in timeline even longer then 150min? how much did you import into iM, to create such a "beast"? must be a gigantic project, hm?... Titanic II... ;-))
iM is a consumer product, we do read of reports here, that from some point of size (imported data, length, complexity of project), iM is a little "overwhelmed..." esp., iM is part of iLife, meaning, mainly meant exports go to tape (=60min max.) or iDVD (120min max.)
secondly, MacOsX is a UNIX system, which makes excessive use of socalled temp-files on (startup-) harddrive... it is recommended, not to overcrowd the drive 80 - 90% of max.
probably, your ~35GB of data transfer from a ~60GB project was simply too much for your Mac?
helpful?

Database Hangs on Startup

Hi
We are using Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 .
We Restored the database on Test server from Production by using RMAN .
The problem is when we startup the database it hangs after Mount phase.
In alert log file We saw the following eror
ERROR, tran=19.10.20602, session#=1, ose=0:
ORA-03113: end-of-file on communication channel
We removed all the DBLINKS as we thought that could be the problem but the problem was same.
We found some Pending transactions in DBA_2PC_PENDING and purged all of them (19.10.20602 in the above error was part of Pending transaction)
But the database still hangs on startup .
The last entry in alert file inow is
Wed Aug 17 16:05:12 2011
QMNC started with pid=19, OS id=2803
If we leave the database in this mode it will finally comes up with "Database opened" but this is after 6 to 7 hours.
Ocassionaly we will see the following error in alert log file
Fatal NI connect error 12170.
VERSION INFORMATION:
TNS for Solaris: Version 11.1.0.6.0 - Production
Oracle Bequeath NT Protocol Adapter for Solaris: Version 11.1.0.6.0 - Pr
oduction
TCP/IP NT Protocol Adapter for Solaris: Version 11.1.0.6.0 - Production
Time: 12-AUG-2011 15:12:37
Tracing not turned on.
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12606
nt main err code: 0
nt secondary err code: 0
Please help
Thanks

The strange thing is that it hangs on Database mount for long time
Total System Global Area 584761344 bytes
Fixed Size 2090792 bytes
Variable Size 159389912 bytes
Database Buffers 415236096 bytes
Redo Buffers 8044544 bytes
Database mounted.
and last entry in log file is :
Starting background process QMNC
Thu Aug 18 11:13:34 2011
QMNC started with pid=19, OS id=18043
But if I use CTRL+C
it gives me the following in sql
^CORA-01013: user requested cancel of current operation
and in alert log file now I an see "Completed: ALTER DATABASE OPEN"
Please help.

10.5 Server hangs on startup

Hi there,
After some maintenace I had to restart my MDD Sever but it hanged on startup. Booted again in safe mode (over 45 mins) still no luck. I can get it to boot from a sharepoint running 10.5 client. What's the best thing I can do from there? Sorry, I can't think straight anymore.

Just installed 10.5.6. No problems, following the usual apple guide to good
housekeeping:
1) close all programs
2) REPAIR disk permissions (irrespective of whether you ran it the day before).
3) Download and install software
3a) On MBP, or Macbooks, ensure your AC adaptor is connected (irrespective of whether battery is 100% or not).
4) Enter password (if asked) and install.
My Mac Pro took about 5 minutes downloading the 190mB (probably Apple is busy right now) and about 1 1/2 minutes to install.

Finder Hanging On Startup, Restart

This just started several days ago; the Finder hangs after a normal startup. After say, three minutes, everything finishes loading to my desktop and system operation is normal, other than the HD seems to perhaps be running too much.
Here is my console log, parsed to only include events since my last shutdown. Help is appreciated.
10/28/08 11:40:32 AM com.apple.loginwindow[374] Shutdown NOW!
10/28/08 11:40:32 AM com.apple.loginwindow[374] System shutdown time has arrived
10/28/08 11:40:33 AM com.apple.SystemStarter[29] Stopping HP Trap Monitor
10/28/08 11:40:33 AM com.apple.SystemStarter[29] Stopping HP IO Monitor
10/28/08 11:40:35 AM com.apple.SystemStarter[29] kextunload: unload kext /System/Library/Extensions/Pvsnet.kext succeeded
10/28/08 11:40:35 AM com.apple.SystemStarter[29] kextunload: unload kext /System/Library/Extensions/ConnectUSB.kext succeeded
10/28/08 11:40:36 AM com.apple.SystemStarter[29] kextunload: unload kext /System/Library/Extensions/vmmain.kext succeeded
10/28/08 11:41:13 AM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
10/28/08 11:41:13 AM com.apple.launchd[1] (com.adobe.versioncueCS3) Unknown key: ServiceDescription
10/28/08 11:41:13 AM com.apple.launchd[1] (org.cups.cups-lpd) Unknown key: SHAuthorizationRight
10/28/08 11:41:13 AM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
10/28/08 11:41:13 AM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
10/28/08 11:41:21 AM com.apple.launchd[1] (com.openssh.sshd) Unknown key: SHAuthorizationRight
10/28/08 11:41:21 AM com.apple.launchd[1] (com.vmware.launchd.vmware[51]) posix_spawnp("/Library/Application Support/VMware Fusion/boot.sh", ...): No such file or directory
10/28/08 11:41:21 AM com.apple.launchd[1] (com.vmware.launchd.vmware[51]) Exited with exit code: 1
10/28/08 11:41:27 AM org.ntp.ntpd[25] Error : nodename nor servname provided, or not known
10/28/08 11:41:29 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (89 retries left)
10/28/08 11:41:30 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (88 retries left)
10/28/08 11:41:31 AM com.apple.SystemStarter[29] Starting HP IO Monitor
10/28/08 11:41:31 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (87 retries left)
10/28/08 11:41:32 AM com.synium.cleanappdaemon[52] Tue Oct 28 11:41:32 stephen-powers-macbook-pro-15.local CleanApp Daemon[52] <Warning>: 3891612: (CGSLookupServerRootPort) Untrusted apps are not allowed to connect to or launch Window Server before login.
10/28/08 11:41:32 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (86 retries left)
10/28/08 11:41:32 AM com.synium.cleanappdaemon[52] Tue Oct 28 11:41:32 stephen-powers-macbook-pro-15.local CleanApp Daemon[52] <Error>: kCGErrorRangeCheck : On-demand launch of the Window Server is allowed for root user only.
10/28/08 11:41:32 AM com.synium.cleanappdaemon[52] Tue Oct 28 11:41:32 stephen-powers-macbook-pro-15.local CleanApp Daemon[52] <Error>: kCGErrorRangeCheck : Set a breakpoint at CGErrorBreakpoint() to catch errors as they are returned
10/28/08 11:41:33 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (85 retries left)
10/28/08 11:41:33 AM com.synium.cleanappdaemon[52] _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL.
10/28/08 11:41:34 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (84 retries left)
10/28/08 11:41:35 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (83 retries left)
10/28/08 11:41:36 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (82 retries left)
10/28/08 11:41:37 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (81 retries left)
10/28/08 11:41:38 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (80 retries left)
10/28/08 11:41:39 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (79 retries left)
10/28/08 11:41:40 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (78 retries left)
10/28/08 11:41:41 AM com.apple.SystemStarter[29] Starting HP Trap Monitor
10/28/08 11:41:41 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (77 retries left)
10/28/08 11:41:42 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (76 retries left)
10/28/08 11:41:43 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (75 retries left)
10/28/08 11:41:44 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (74 retries left)
10/28/08 11:41:45 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (73 retries left)
10/28/08 11:41:46 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (72 retries left)
10/28/08 11:41:47 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (71 retries left)
10/28/08 11:41:48 AM com.apple.SystemStarter[29] kextload serialization lock busy; sleeping (70 retries left)
10/28/08 11:41:49 AM com.apple.SystemStarter[29] kextload: extension /System/Library/Extensions/hypervisor.kext is already loaded
10/28/08 11:41:49 AM com.apple.SystemStarter[29] kextload: extension /System/Library/Extensions/vmmain.kext is already loaded
10/28/08 11:41:49 AM com.apple.SystemStarter[29] kextload: extension /System/Library/Extensions/ConnectUSB.kext is already loaded
10/28/08 11:41:50 AM com.apple.SystemStarter[29] kextload: extension /System/Library/Extensions/Pvsnet.kext is already loaded
10/28/08 11:41:51 AM com.apple.SystemStarter[29] kextload: /Library/StartupItems/Parallels/Pvsvnic.kext loaded successfully
10/28/08 11:41:59 AM com.openbase.com.openexec[50] 2008-10-28 11:41:59.416 openexec[106:10b] OpenBase using local ip 127.0.0.1. Network Disabled.
10/28/08 11:42:01 AM com.openbase.com.openexec[50] chmod: /Library/OpenBase/Config/AutoStart: No such file or directory
10/28/08 11:42:02 AM com.apple.launchd[1] (com.apple.RemoteDesktop.agent) Throttling respawn: Will start in 5 seconds
10/28/08 11:42:05 AM [0x0-0x7007].com.netopia.timbuktu.pro.host[140] tb2 host[140]: Starting. Parent is 1, effective user is 0, real user is 0, session is 140.
10/28/08 11:42:05 AM [0x0-0x7007].com.netopia.timbuktu.pro.host[140] tb2 host[140]: Application active
10/28/08 11:42:06 AM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[135]) Exited: Terminated
10/28/08 11:42:06 AM com.apple.launchctl.Aqua[143] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/com.adobe.versioncueCS3.monitor.plist
10/28/08 11:42:07 AM com.netopia.timbuktu.pro.host[144] tb2 host[144]: Starting. Parent is 93, effective user is 0, real user is 501, session is 93.
10/28/08 11:42:08 AM com.netopia.timbuktu.pro.host[144] tb2 host[144]: Application active
10/28/08 11:42:10 AM com.apple.launchctl.System[2] BootCacheControl: could not fetch history: Cannot allocate memory
10/28/08 11:42:10 AM com.apple.launchctl.System[2] BootCacheControl: could not stop cache/fetch history: Cannot allocate memory
10/28/08 11:42:26 AM com.apple.launchd[1] ([0x0-0x7007].com.netopia.timbuktu.pro.host[140]) Exit timeout elapsed (20 seconds). Killing.
10/28/08 11:42:27 AM com.netopia.timbuktu.pro.host[144] tb2 host[144]: Previous host died. Removing stale shared memory.
10/28/08 11:42:27 AM com.apple.launchd[1] ([0x0-0x7007].com.netopia.timbuktu.pro.host[140]) Exited: Killed
10/28/08 11:42:30 AM Finder[161] [QL ERROR] Generator database update takes too long... we will use what we currently have
10/28/08 11:42:35 AM com.apple.launchd[93] (0x101080.VersionCueCS3monitor) Failed to check-in!
10/28/08 11:42:47 AM ChronoSyncBackgrounder[178] ChronoSync Backgrounder v3.3.6 is running.
10/28/08 11:43:10 AM SystemUIServer[159] SyncServer is unavailable: exception when connecting: connection timeout: did not receive reply
10/28/08 11:43:25 AM SyncServer[173] SyncServer: Truth vacuumed. Next vacuum date 2008-11-11 10:42:59 -0500
10/28/08 11:43:25 AM FileSyncAgent[164] MKCOL /.FileSync (FAILED), httpStatusCode:405, errorType:100, transactionState:5, txnId:9CAB0758-1067-4B3E-901B-E7EF71D75CB2, auto-retries=0, manual-retries=0
10/28/08 11:43:31 AM SyncServer[173] * -[NSMachPort handlePortMessage:]: dropping incoming DO message because the connection or ports are invalid

Then, reinstall the 10.5.5 COMBO update and see if that fixes things. You might want to update your profile info to reflect the OS properly—if you have different versions on different machines, associate the versions to the machines.

Oas hangs after startup

Similar Messages

Maybe you are looking for