OAS Patch Application Failure 10.1.2.0.2 to 10.1.2.3.0

Hello,
i am runnng RHEL 4.5 attempting to apply the 10.1.2.3.0 patch to my working installation of 10.1.2.0.2 standalone forms and reports services
During the installation it comes up with the error
Error invoking target 'frmweb_install frmcmp_install frmcmpb_install' of makefile /opt/oracle/forms/lib/ins_forms.mk
This leaves the forms conponent broken and giving the 'FRM-92101 - failure on startup - maybe invalid configuration' message.
I checked the installation log in my oraInventory/logs/installActions*DATE*.log as suggested. This shows an error during a make as implied.
Having done some searching around this forum I found that attempting to compile the forms manually often solves this kind of problem.
doing a 'make -f ins_forms.mk frmweb' gets most of the way and fails on
/usr/bin/ld: skipping incompatible type /opt/oracle/libiplsn.a when searching for -liplsn
/usr/bin/ld: skipping incompatible type /opt/oracle/libiplsn.a when searching for -liplsn
/usr/bin/ld: cannot find -liblsn
something linked wrong here?
Thanks for the help

ahh. Yes when I installed frs it complained that I needed to put bash into 32bit mode 'linux32 bash'. The 10.1.2.3 installer never did that.
Please can you advise me how to fix this issue and do a make clean. I'm not the most linux savvy person.
Am i going to have to reinstall OAS completely for 64bit? Is there a way to avoid having to do that?
Thanks
Edited by: user10695402 on 31-Mar-2009 03:42

Similar Messages

No data in Application failure Analysis report for a particular application alone.

Dear All,
We are not able to get the data in Application Failure Analysis report from Appadvisor for a particular application(say ABC) alone, whereas it works fine for different application. Also,we could get the data from other reports(such
as Application status,Problem distribution analysis,etc) for the same application(ABC). PFB snapshot for your reference.
Thanks in Advance.
Regards,
Rajesh Kumar C

Hi,
Is there any error message when you run Application Failure Analysis report for the specific application?
Does this application have any failure alerts?
You may also look into operation manager even logs to check is there any errors or warnings.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

No Data to display in Application failure report for a specific Application

Hi ,
For a specific application,Application failure report showing no data to display but for the same application other reports shows value.
Application failure reports seems to work fine for some other application except few.Need to know the root cause.
Kindly help us to sort this issue.
Thanks & Regards,
Preethi S

Hi,
Is there any error message when you run Application Failure Analysis report for the specific application?
Does this application have any failure alerts?
You may also look into operation manager even logs to check is there any errors or warnings.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Query in Oracle 10.2.0.2 Patch application

Hi All,
I need to apply patch for Oracle 10.2.0.2 on HP-Unix IA 64-bit server and when i saw SAP Marketplace, found latest CPU Patch of Janauary 2008 (p6646850_10202_HPUX-IA64) as per note # 1140644.
Along with this i also found 1 note mentioning about Optimizer merge fix patch application as per OSS note # 981875 and so downloaded file p7608184_10202_HPUX-IA64.zip, which is relevant to it.
Now when i read note # 981875 , i found that, it clashes with above mentioned CPU patch and want this to uninstall it and then apply Optimizer patch. And no where then it is mentioning to apply CPU patch again.
So i want to know, do i required now only to apply only Optimizer merger fix patch and not CPU Patch as per 981875 note. Just fyi...CPU patch is of Jan 2008 & Optimizer fix patch is of 01/12/2009?
Please let me know, how to go about it, if anyone has already done this.
Thanks for your answers in advance

Hai,
The answer is already in the SAP Note 1140644.
'We recommend that ALL SAP customers import the CPU patch only if it is absolutely necessary'
Risks:
The main risk when you install the CPU is that, as soon as SAP provides a new patch, this patch could clash with the CPU (it may not clash). If a clash occurs, you must decide between the CPU and the new patch.
The reason for the clash is the fixes which you apply from the patch as per SAP Note 981875 are already there in the system after the Installation of the CPU, according to SAP, CPU is a fix for security-related areas.
When you install the CPU patch, you will be informed that this patch is part of the CPU (# are included in the patch currently being installed (6646850). If you continue, they will be rolled back and the new patch (6646850) will be installed ...).
As far as I know, It is better to apply only the Optimizer merge fixes not the CPU once again.
Regards,
Yoganand.V

Reduce downtime required for support patch application

Dear Experts,
I would like to know if there are any tips / notes we need to follow during application of
support patches to reduce the downtime window ( as during patch application , system is not
usable for normal users ) , any temparary parameter changes to Oracle RDBMS which we can
activate before appication of support patch and then revert the same once Patches are loaded
for normal Day operations.
Is there any note which talks specific settings which could enhance the performance
of support patch application process on Oracle RDBMS.
Regards,
RR

To my understanding if i select Downtime minimized some phases of Patch application could
be carried out when users are online and for others would get notified in SPAM for downtime
, so we just need to lock users and perform start for those rest of Import phases.
Yes this is correct, theoretically you can apply single patches with downtime minimized one after another. But this does not make a lot of sense obviously, because you will have several distinct downtimes then. So to apply one queue containing all packages is the way to go.
Regarding your questions on the benefits, i am afraid the answer here is: it depends, as for most performance tuning options you will have to test carefully if the are working.
For the db_cache_size consider:
- is my db_cache_size smaller than 1000M?
- do i have enough free memory on my server?
- am i seeing low buffer hit ratio while applying support packages?
If all questions are a yes, then i recommend you increase it to 2000M, it is easy to do. But if you don't have free memory on the server, then you will severly hurt performance by causing paging. If you don't have low buffer hit ratio (or you have lightspeed disks , then the tuning will not speed up anything.
As you see, you have options, but there isn't a single speed button that solves your problem.
Regards, Michael

Patch application in a DataGuard environment!

Just curious if anyone out there has any patch application best practices in a DG environment.
Our environment is:
- Oracle v 10.2.0.3
- Solaris 10
- DG in Physical Standby
We are in the process of applying July CPU patch and just want to check if anyone out there has any recommendations.
Appreciate all your help.

Hi, the July Patch can be from Metalink site into Note:432865.1 and the link is
https://metalink.oracle.com/metalink/plsql/f?p=130:14:1963896718475765486::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,278641.1,1,0,1,helvetica
Good luck.
Regards.

11.5.10 CU2 patch application unable to locate LoadDTDToClob.class

Hi All,
I am applying the 11.5.10 CU2 patch
In between the patch application paused and I got the messgae like this:
ATTENTION: All workers either have failed or are waiting:
FAILED: file LoadDTDToClob.class on worker 1.
FAILED: file LoadXSLTToClob.class on worker 2.
FAILED: file LoadDTDToClob.class on worker 3.
FAILED: file LoadDTDToClob.class on worker 4.
FAILED: file LoadDTDToClob.class on worker 5.
FAILED: file LoadXSLTToClob.class on worker 6.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
I found that the fix for the above said is to set the classpath variable in the ieoenv.sh
I found the ieoenv.sh in the following location:
/d01/oracle/visappl/ieo/11.5.0/admin/scripts/VIS_vision/ieoenv.sh
and the content of the ieoenv.sh is as follows:
IEO_TOP=/d01/oracle/visappl/ieo/11.5.0
I could not find the jdbc111.zip file in this location
How can i proceed further to fix this
Many thanks and best regards...

plz post the adworkxx.log and try to following also
1- backup your adovars.env file
2- modify your adovar.env file and substitute appbsorg2.zip by appsborg.zip
3-restart the patch
the jdbc111.zip is under
appl_top/abm/11.5.0/jar/jdbc111.zip
appl_top/fnd/11.5.0/java/3rdparty/stdalone/jdbc111.zip
fadi
http://oracle-magic.blogspot.com

OWB 10.2.0.4 patch application failed and seek advice.

Hi,
I have read some posts in this forum and tried to solve my problem with OWB 10.2.0.4 patch application. My basic situation is: OWB 10.2.0.3 was installed by someone before. Now developer only can get OWB 10.2.0.4 client. It can not access into existing OWB 10.2.0.3 repository because the version is not matched. I have to apply OWB patch 10.2.0.4 to OWB server. Installing patch is OK. After that, I need to create a test repository to upgrade OWB 10.2.0.3 repository to 10.2.0.4. When I tried to do so. I failed to either a new test repository or even accessed into existing repository. I got different errors as INS0009, ORA-01017 and LRM-00109 with the message as 'unable to connect to database with user SYS, invdlid username/password' Then I followed advices from another thread. Done these steps:
1. SQLNET.AUTHENTICATION SERVICES=(NTS)
2. INIT.ORA, remote_login_passwordfile=exclusive.
3. shutdown database
4. recreate password by using orapwd.
5. startup database and connect as: sys/new_sys_password as sysdba, I connected.
6. select * from v$pwfile_users; I got ' no rows selected'
7. I guess the sys might not have sysdba privilege, Grant SYSDBA to sys; I was feedbacked with ' password file missing or disabled'
I haven't used OWB before and don't know where is the problem that I cannot create a new test repository or access current repository. The password file has been recreated and verified. Why login process failed. By the way, I still use OWB client 10.2.0.3 on my desktop (old) and I have no problem to access into exisiting repository. Please help me to figure out the problem and upgrade my OWB server. Thanks in advance.

You don't answer to my question (about name of password file), maybe your problem is caused by incorrect filename.
Also please show instance name with select from v$instance:
select instance_name from v$instance;
Do you show me how to check this?What is the filesystem type where Oracle software installed?
In Windows Explorer open directory ORACLE_HOME\database, rightclick on password file and select Properties from menu.
Select Security tab and select (in Groups ans users list) the user under which Oracle instance service is executed (by default it is user SYSTEM),
in the bottom list (Permissions for ...) check granted rights.

Setups in Database installation or patch application

Hi all,
In the database installation or patch application, in the unzipped directories you have multiple
setup.exe files along with oui.exe.
For example: in 10g
you have one setup.exe under directory 10gR2_server\database
also you have one setup.exe and one oui.ex under directory 10gR2_server\database\install.
I am wondering what are the differences among those setup.exe and oui.exe. Sometimes we tried the setup.ex in one directory it throw some error and tried another one it works. I am kind of confused.
Thanks a lot for your help,
Shirley

Hi Shirley
As far as I know setup.exe is starting the Oracle Universal installer and the oui.exe is called by the setup.exe.
Sometimes your can perform silent install as this:
oui.exe -waitforcompletion -nowait -force -silent -responseFile response_file.rsp
Regards,
Hub

Patch application paused for patch

Hi All,
The patch application paused while applying the 11.5.10 CU2
FAILED: file LoadDTDToClob.class on worker 1.
FAILED: file LoadXSLTToClob.class on worker 2.
FAILED: file LoadDTDToClob.class on worker 3.
FAILED: file LoadDTDToClob.class on worker 4.
FAILED: file LoadDTDToClob.class on worker 5.
FAILED: file LoadXSLTToClob.class on worker 6.
I found that i have to change the CLASSPATH variable in ieoenv.sh file
I located the ieoenv.sh files in the node at:
/d01/oracle/visappl/ieo/11.5.0/admin/scripts/VIS_vision/ieoenv.sh
in the file i found only the following entry
IEO_TOP=/d01/oracle/visappl/ieo/11.5.0
How can I fix this..
The CU2 patch aplication is paused and in a waiting status to fix this..
Many thanks and best regards....

Duplicate post .. Follow up other one at:
Re: 11.5.10 CU2 patch application unable to locate LoadDTDToClob.class

I have installed an evaluation version of lightroom 5.6 64 bits on my Pc windows 7 64 bits sp1. Technical capacities are Ok. When I try to run lightroom I Read tue following message "lightroom exe. application failure 0xc000007b". Thanks for your help

I have installed an evaluation version of lightroom 5.6;64 bits on my windows 7 64 bits pc sp1. Tecnical capacities of my pc are ok. When I Try to run lightroom i read the following message :"lightroom exe. application failure 0x000007b" Thanks for your help. Pasc39

I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.

Null application failure/shared library error

I get a null application failure when I restart my eMac. I also can't run Quicken and several other applications. They all say shared library failure. Even my firefox browser won't launch.

You can try to reinstall Mac OS 10.4.8 combo update Intel or PPC.
Anyway, this is symptomatic of hard drive failure and needs repair (changing the hard drive).
Why reward points ?
MacBook Pro 15" 2,33GHz | iPod | iPod Shuffle | Mighty Mouse BT Mac OS X (10.4.8) 2Go RAM, 120G HD

What is Patch Application Assistant by entering "admsi.pl" & how to run it?

Hi
I am trying to apply patch 6510214 on Oracle Apps R12.0 (Base Release), inorder later to upgrade to R12.0.4.
In Readme Document for patch 6510214, it is written as 'Run the Patch Application Assistant by entering "admsi.pl". How do i run this and also needs steps to upgrade to R 12.0.4.
Please help me.
Thanks
Ateeq

Hi
Regarding this patch_top directory. We have single node installation and path is /vision/patch. How do i check whether it is a correct patch_top directory or not?
When applying 'u driver' patch, in what locations exactly i have to copy downloaded,unzip file in order to apply both on AS and DB server.
Like the steps for applying patch in R11.5.9,are
1     Copy your Patch Zip file to patches folder
2     Unzip your Patches
3     Stop All Services on AS
4     Stop Concurrent Manager on DB Server
5     Source the Environment (AS)
6     Locate Patch Directory
7     Enable Maintenance Mode using adadmin command
8     Apply Patch using adpatch utility
9     Disable Maintenance Mode using adadmin command
10     Depending on Driver type (Repeat steps from 2 to 9)
11     Verify changes as mention in README file
12     Start Concurrent Manager on DB Server
13     Start All Services on AS
Is it the same sequence in R12.0.0 or different? Please put some light on this issue.
Thanks
Ateeq

SCOM-Difference between Problem Count and Event Count in Application Failure Analysis Report

Dear All,
Could someone explain me clearly , the difference between Problem Count and
Event Count in Application Failure Analysis Report. Please help me in understanding What is meant be problem and event in the report .
Thanks in Advance.
Regards,
Rajesh Kumar C

Hello Rajesh,
The "problem" is the logically grouped set of the exception events which have the identical hash calculated over several fields as "Stack", "Source", "Failed Function" and so on... So, even if exceptions are different
in the other properties but hash matches over the considered properties - then all those exceptions go into the same "problem group".
So, event is an instance of the problem. One event contributes to one problem but one problem might have a huge event count if you have a repeating issue.
The logic is similar for the performance analysis report, only fields that go into the "problem" hash are different. e.g. "Stack" is not used in hash for perf events...
Dmitry Matveev

Does Weblogic12c support Application Failover ? If yes, then how does Weblogic12c detect an application failure (OutOfMemoryException)?

Hi all,
Need help to setup High Availability at my workplace, can somebody please tell that Weblogic12c support Application Failover ?
If yes, then how does Weblogic12c detect an application failure (OutOfMemoryException)?
WebLogic Server - General@

Hi there user,
you can achieve HA in different levels:
1. On a single machine - here you need to set up nodemanager. When started by nodemanager, any server failures will be detected and the nodemanager will try to restart it. OOME is an exception thrown by the JVM and the server state should go FAILED at some point then the NM will try to restart it. Nodemanager is the simplest HA solution you can and must implement for production environment;
2. On redundant machine - you can configure WLS clustering, but you will need more complex environment, i.e. you will need a load balancer in front of the cluster to reverse proxy the requests. This scenario is can also use nodemanager to control the WLS instances on each machine
3. Cluster with server/service migration - the most complex scenario where in cases of machine failure the WLS cluster can "relocate" resources (services and whole severs) to spare machines.
In your case OOME should cause the JVM respectively WLS to be unresponsive, hence the nodemanager will detect this at some point and will try to restart the WLS.
Hope this helps,
A.

OAS Patch Application Failure 10.1.2.0.2 to 10.1.2.3.0

Similar Messages

Maybe you are looking for